* Ouch: found a bug where re-exec from changed makefiles turned off

jobserver :(.

.cvsignore

@@ -0,0 +1,28 @@
+*.gz *.Z *.tar *.tgz
+=*
+TODO COPYING*
+make-3* make-test*
+*.info *.info-*
+stamp-*
+makebook*
+
+.*gdbinit
+
+*.dep *.dvi *.toc *.aux *.log
+*.cp *.cps *.fn *.fns *.vr *.vrs *.tp *.tps *.ky *.kys *.pg *.pgs
+
+README README.DOS README.W32
+aclocal.m4 config.h.in config.h configure Makefile.in
+build.sh.in build.sh
+SMakefile NMakefile Makefile.DOS
+config.ami configh.dos config.h.W32 config.h-vms
+
+.deps .dep_segment
+
+_*
+sun4 i386 i386-netbsd hp300-netbsd hp300 rs6000 sun3 news800 amiga
+hp700 hp834 mips sol2 i486-linux
+
+customs
+
+install-sh mkinstalldirs

.purify

@@ -0,0 +1,12 @@
+# Solaris (2.5.1) has a couple if issues.
+#
+suppress plk malloc; setvbuf "libc*"; main "main.c"
+suppress umr kstat_read; kstat_chain_update; kstat_open; getloadavg
+suppress umr kstat_chain_update; kstat_open; getloadavg
+
+# The command line options stuff leaks a little bit.  No big deal.
+#
+suppress mlk malloc; xmalloc "misc.c"; decode_env_switches "main.c"
+suppress plk malloc; xmalloc "misc.c"; decode_env_switches "main.c"
+suppress mlk malloc; xmalloc "misc.c"; concat "misc.c"; decode_env_switches "main.c"
+suppress plk malloc; xmalloc "misc.c"; concat "misc.c"; decode_env_switches "main.c"

AUTHORS

@@ -0,0 +1,56 @@
+-----------------------------------
+
+GNU make development up to version 3.75 by:
+    Roland McGrath <roland@gnu.org>
+
+
+Development starting with GNU make 3.76 by:
+    Paul D. Smith <psmith@gnu.org>
+
+
+GNU Make User's Manual
+  Written by:
+    Richard M. Stallman <rms@gnu.org>
+
+  Edited by:
+    Roland McGrath <roland@gnu.org>
+    Bob Chassell <bob@gnu.org>
+    Melissa Weisshaus <melissa@gnu.org>
+    Paul D. Smith <psmith@gnu.org>
+
+-----------------------------------
+GNU make porting efforts:
+
+  Port to VMS by:
+      Klaus Kaempf <kkaempf@progis.de>
+      Archive support/Bug fixes by:
+        John W. Eaton <jwe@bevo.che.wisc.edu>
+        Martin Zinser <zinser@decus.decus.de>
+
+  Port to Amiga by:
+      Aaron Digulla <digulla@fh-konstanz.de>
+
+
+  Port to MS-DOS (DJGPP) and MS-Windows 95/NT by:
+      DJ Delorie <dj@delorie.com>
+      Rob Tulloh <rob_tulloh@tivoli.com>
+      Eli Zaretskii <eliz@is.elta.co.il>
+
+-----------------------------------
+Other contributors:
+
+  Janet Carson <janet_carson@tivoli.com>
+  Howard Chu <hyc@highlandsun.com>
+  Paul Eggert <eggert@twinsun.com>
+  Klaus Heinz <kamar@ease.rhein-main.de>
+  Michael Joosten
+  Jim Kelton <jim_kelton@tivoli.com>
+  David Lubbren <uhay@rz.uni-karlsruhe.de>
+  Tim Magill <tim.magill@telops.gte.com>
+  Han-Wen Nienhuys <hanwen@cs.uu.nl>
+  Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+  Carl Staelin (Princeton University)
+  Ian Stewartson (Data Logic Limited)
+
+With suggestions/comments/bug reports from a cast of ... well ...
+hundreds, anyway :)

COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          59 Temple Place - Suite 330, Boston, MA
+                          02111-1307, USA.
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	Appendix: How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

GNUmakefile

@@ -1,279 +0,0 @@
-# GNU Make-specific makefile for GNU Make.
-
-# Copyright (C) 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-# 
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-.PHONY: default
-default:
-
-# Set `ARCH' to a string for the type of machine.
-ifndef ARCH
-ifdef machine
-ARCH = $(machine)
-endif # machine
-endif # not ARCH
-
-override srcdir := .
-override CC := $(CC)
-
-ifeq ($(ARCH),hp300)
-#customs=yes
-endif
-ifdef customs
-override REMOTE := cstms
-else
-override REMOTE := stub
-endif
-
-# Get most of the information from the Unix-compatible makefile.
-include compatMakefile
-
-MAKE = $(MAKE_COMMAND) $(MAKEOVERRIDES)
-
-# Remove autoconf magic.
-extras := $(filter-out getloadavg.o @%@,$(extras)) getloadavg.o
-LOADLIBES := $(filter-out @%@,$(LOADLIBES))
-ALLOCA := $(filter-out @%@,$(ALLOCA))
-
-ifdef AC_MACRODIR
-configure config.h.in: $(patsubst %,$(AC_MACRODIR)/%.m4,acspecific acgeneral)
-config.h.in: $(AC_MACRODIR)/acconfig.h
-endif
-configure: configure.in; autoconf $(ACFLAGS)
-config.h.in: configure.in; autoheader $(ACFLAGS)
-
-ifdef customs
-defines := $(defines) -Ipmake/customs -Ipmake/lib/include
-LOADLIBES := $(addprefix pmake/customs/,customslib.o rpc.o xlog.o) \
-	     pmake/lib/sprite/libsprite.a
-endif
-
-ifdef ARCH
-
-ifndef no_libc
-libc_dir = /home/gd2/gnu/libc/$(ARCH)
-ifneq ($(wildcard $(libc_dir)),)
-ifneq ($(wildcard $(libc_dir)/works-for-make),)
-#CPPFLAGS := -I$(libc_dir)/include
-#LDFLAGS := -nostdlib $(libc_dir)/lib/start.o
-#LOADLIBES := $(LOADLIBES) \
-#	     $(libc_dir)/lib/mcheck-init.o \
-#	     $(libc_dir)/lib/libc.a \
-#	     -lgcc \
-#	     $(libc_dir)/lib/libc.a
-CC := $(CC) -b glibc
-
-# getopt is in libc.
-GETOPT =
-#GETOPT_SRC = Don't clear this or dist will break.
-
-# glob is in libc too.
-GLOB = 
-
-else
-
-CPPFLAGS := $(CPPFLAGS) -Iglob
-
-endif	 # works-for-make
-endif	 # $(libc_dir)
-endif	 # !no_libc
-
-# We know the type of machine, so put the binaries in subdirectories.
-$(ARCH)/%.o: %.c
-	$(COMPILE.c) -Iglob $< $(OUTPUT_OPTION)
-$(ARCH)/glob/libglob.a: FORCE
-	$(MAKE) -C $(@D) $(@F) \
-		CC='$(CC)' CFLAGS='$(CFLAGS) -I..' \
-		CPPFLAGS='$(CPPFLAGS) -DHAVE_CONFIG_H'
-FORCE:
-objs := $(addprefix $(ARCH)/,$(objs))
-prog := $(ARCH)/make
-
-archpfx = $(ARCH)/
-
-$(archpfx)load.o: load.c
-	$(COMPILE.c) $(LOAD_AVG) $< -o $@
-$(archpfx)load.dep: load.c
-	$(mkdep) $(LOAD_AVG) $< | sed 's,$*\.o,& $@,' > $@
-
-CPPFLAGS := -I$(ARCH) $(CPPFLAGS) -DHAVE_CONFIG_H $(filter-out @%@,$(defines))
-
-ifneq "$(wildcard $(ARCH)/makefile)" ""
-include $(ARCH)/makefile
-endif
-objs := $(objs) $(addprefix $(ARCH)/,$(ALLOCA) $(extras))
-
-else # Not ARCH
-prog := make
-endif
-
-ifneq	"$(findstring gcc,$(CC))" ""
-CFLAGS = -g -W -Wunused -Wpointer-arith -Wreturn-type -Wswitch
-else
-CFLAGS = -g
-endif
-LDFLAGS = -g
-
-# Define the command to make dependencies.
-ifneq	"$(findstring gcc,$(CC))" ""
-# Don't include system directories.
-mkdep-nolib = $(CC) -MM $(CPPFLAGS)
-else
-mkdep-nolib = $(mkdep)
-endif
-mkdep = $(CC) -M $(CPPFLAGS)
-
-depfiles = $(patsubst %.o,%.dep,$(filter %.o,$(objs)))
-
-
-.PHONY: default
-default: $(prog)
-
-$(prog): $(objs) $(globdep) #$(addprefix $(ARCH)/,gmalloc.o mcheck.o)
-	$(CC) $(LDFLAGS) $^ $(globlib) $(LOADLIBES) -o $@.new
-	mv -f $@.new $@
-
-globfiles = $(addprefix glob/,COPYING.LIB Makefile.in \
-			glob.c fnmatch.c glob.h fnmatch.h)
-$(globfiles): stamp-glob ;
-stamp-glob: /home/gd/gnu/libc/posix/glob.tar
-	-rm -rf glob
-	tar xvf $< glob
-	touch $@
-/home/gd/gnu/libc/posix/glob.tar: force
-	$(MAKE) -C $(@D) $(@F) no_deps=t
-.PHONY: force
-force:
-
-# Make the Unix-compatible Makefile to be distributed by appending
-# the automatically-generated dependencies to compatMakefile.
-ifeq ($(mkdep),$(mkdep-nolib))
-nolib-deps = $(depfiles)
-else
-%.dep: %.c
-	$(mkdep-nolib) $< | sed -e 's,$*\.o,$(@:.dep=.o) $@,' > $(@:.dep=.dtm)
-	mv -f $(@:.dep=.dtm) $@
-nolib-deps = $(patsubst $(archpfx)%,%,$(depfiles))
-endif
-# The distributed Makefile.in should contain deps for remote-stub only.
-Makefile.in: compatMakefile $(nolib-deps:remote-%.dep=remote-stub.dep)
-	(sed 's/^MAKE[	 ]*=.*$$/@SET_MAKE@/' $<; \
-	 echo '# Automatically generated dependencies.'; \
-	 sed -e 's/ [^ ]*\.dep//' -e 's=$(archpfx)==' $(filter-out $<,$^) \
-	) > $@
-
-.SUFFIXES: .dep
-# Maintain the automatically-generated dependencies.
-ifndef	   no_deps
-include $(depfiles)
-endif
-$(archpfx)%.dep: %.c
-	$(mkdep) $< | sed 's,$*\.o,$(@:.dep=.o) $@,' > $@
-
-ETAGS = etags -T # for v19 etags
-
-# Run the tests.
-.PHONY: tests
-testdir := $(shell ls -d1 make-test-?.? | sort -n +0.10 -0.11 +0.12 | tail -1l)
-tests:# $(testdir)/run_make_tests.pl $(prog)
-#	cd $(<D); MAKELEVEL=0 perl $(<F)
-
-build.sh.in: build.template compatMakefile
-	sed -e 's@%objs%@$(filter-out remote-% $(GLOB) $(ALLOCA) $(extras),\
-	       $(patsubst $(archpfx)%,%,$(objs)))\
-	       $(patsubst %.c,%.o,$(filter %.c,$(globfiles)))@' \
-	    $< > $@.new
-	mv -f $@.new $@
-
-# Make the distribution tar files.
-
-.PHONY: dist
-# Figure out the version number from the source of `version.c'.
-version := \
-  $(strip $(shell sed -e '/=/!d' -e 's/^.*"\(.*\)";$$/\1/' < version.c))
-tarfiles := make # make-doc
-tarfiles := $(addsuffix -$(version).tar,$(tarfiles))
-tarfiles := $(tarfiles:%=%.gz) # no more compress $(tarfiles:%=%.Z)
-# Depend on default and doc so we don't ship anything that won't compile.
-dist: rcs-mark default info dvi tests tarfiles
-.PHONY: tarfiles
-tarfiles: $(tarfiles)
-
-ifndef dist-flavor
-dist-flavor = alpha
-endif
-.PHONY: rcs-mark rcs-mark-alpha rcs-mark-beta
-rcs-mark: rcs-mark-$(dist-flavor)
-rcs-mark-alpha:;rcs -sAlpha -Nmake-$(version-): RCS/[!=]*,v
-rcs-mark-beta:;rcs -sBeta -Nmake-$(version-): RCS/[!=]*,v
-version- = $(subst .,-,$(version))
-
-dist: local-inst
-.PHONY: local-inst
-local-inst: $(prog)
-	install -c -g kmem -o $(USER) -m 2755 $< /usr/local/gnubin/make
-
-# Put the alpha distribution files in the anonymous FTP directory.
-alpha-files = $(tarfiles) GNUmakefile compatMakefile $(testdir).tar.Z
-dist: alpha
-.PHONY: alpha
-alpha-dir := ~ftp/gnu
-alpha-files := $(addprefix $(alpha-dir)/,$(alpha-files))
-alpha: $(alpha-dir) $(alpha-files)
-$(alpha-dir)/%: %
-	@rm -f $@
-	cp $< $@
-
-# Implicit rule to make README and README-doc.
-%: %.template version.c
-	rm -f $@
-	sed 's/VERSION/$(version)/' < $< > $@
-# Make sure I don't edit it by accident.
-	chmod a-w $@
-
-define make-tar
-@rm -fr make-$(version)
-ln -s . make-$(version)
-tar cvhof $@ $(addprefix make-$(version)/,$^)
-rm -f make-$(version)
-endef
-
-%.Z: %; compress -c $< > $@
-%.gz: %; gzip -9 -c -v $< > $@
-
-make-doc-$(version).tar: README-doc COPYING make.dvi make.info make.info*
-	$(make-tar)
-make-$(version).tar: README INSTALL COPYING ChangeLog NEWS \
-          configure Makefile.in configure.in build.sh.in mkinstalldirs \
-	  acconfig.h $(srcs) remote-*.c $(globfiles) \
-	  make.texinfo make-stds.texi \
-	  make.?? make.??s make.toc make.aux make.man texinfo.tex TAGS tags \
-	  install.sh \
-	  make.info make.info*
-	$(make-tar)
-
-ifneq (,)
-tests := $(filter-out %~,$(wildcard tests/*))
-make-tests-$(version).tar.Z: $(tests)
-	@rm -fr make-tests-$(version)
-	ln -s tests make-tests-$(version)
-	tar cvhf $(@:.Z=) $(patsubst tests/%,make-tests-$(version)/%,$^)
-	rm -f make-tests-$(version)
-	compress -f $(@:.Z=)
-endif
-
-$(archpfx)loadtest: $(archpfx)load.o

INSTALL

@@ -0,0 +1,187 @@
+Basic Installation
+==================
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+     If you're building GNU make on a system which does not already have
+     a `make', you can use the build.sh shell script to compile.  Run
+     `sh ./build.sh'.  This should compile the program in the current
+     directory.  Then you will have a Make program that you can use for
+     `make install', or whatever else.
+
+  3. Optionally, type `./make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+

Makefile.DOS.template

@@ -0,0 +1,541 @@
+# -*-Makefile-*- template for DJGPP
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+
+# Copyright (C) 1994, 1995-1998, 1999 Free Software Foundation, Inc.
+# This Makefile.DOS is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# -*-Makefile-*-, or close enough
+
+
+SHELL = /bin/sh
+
+srcdir = .
+VPATH = $(srcdir)
+# $DJDIR is defined automatically by DJGPP to point
+# to the root of the DJGPP installation tree.
+prefix = ${DJDIR}
+exec_prefix = ${prefix}
+
+bindir = ${exec_prefix}/bin
+datadir = ${prefix}/share
+libdir = ${prefix}/lib
+infodir = ${prefix}/info
+# DJGPP doesn't have separate man tree, use info instead.
+mandir = ${prefix}/info
+includedir = ${prefix}/include
+oldincludedir = c:/djgpp/include
+
+pkgdatadir = $(datadir)/make
+pkglibdir = $(libdir)/make
+pkgincludedir = $(includedir)/make
+
+INSTALL = ${bindir}/ginstall -c
+INSTALL_PROGRAM = ${bindir}/ginstall -c
+INSTALL_DATA = ${bindir}/ginstall -c -m 644
+INSTALL_SCRIPT = ${bindir}/ginstall -c
+transform = s,x,x,
+
+# This will fail even if they don't have a Unix-like shell (stock DOS
+# shell doesn't know about `false').  The only difference is that they
+# get "Error -1" instead of "Error 1".
+EXIT_FAIL = false
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AR = ar
+CC = gcc
+CPP = gcc -E
+LIBOBJS =
+MAKEINFO = ${bindir}/makeinfo
+PACKAGE = make
+PERL = perl
+RANLIB = ranlib
+REMOTE = stub
+VERSION = %VERSION%
+
+AUTOMAKE_OPTIONS = 1.2
+
+bin_PROGRAMS =	%PROGRAMS%
+
+make_SOURCES =	%SOURCES%
+# This should include the glob/ prefix
+libglob_a_SOURCES =	%GLOB_SOURCES%
+make_LDADD =	  glob/libglob.a
+
+info_TEXINFOS =	make.texinfo
+man_MANS =	make.1
+
+INCLUDES =	-I$(srcdir)/glob -DLIBDIR=\"c:/djgpp/lib\" -DINCLUDEDIR=\"c:/djgpp/include\"
+
+BUILT_SOURCES =	README build.sh.in
+
+EXTRA_DIST = 	$(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c  make-stds.texi texinfo.tex SCOPTIONS SMakefile  Makefile.ami README.Amiga config.ami amiga.c amiga.h  NMakefile README.DOS configh.dos configure.bat makefile.com  README.W32 build_w32.bat config.h.W32 subproc.bat make.lnk  config.h-vms makefile.vms readme.vms vmsdir.h vmsfunctions.c  vmsify.c
+
+SUBDIRS =	glob
+mkinstalldirs = ${bindir}/gmkdir -p
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =  build.sh
+PROGRAMS =  $(bin_PROGRAMS)
+
+MAKE_HOST = i386-pc-msdosdjgpp
+
+
+DEFS =  -I. -I$(srcdir) -I.
+CPPFLAGS = -DHAVE_CONFIG_H
+LDFLAGS =
+LIBS =
+make_OBJECTS =  %OBJECTS%
+make_DEPENDENCIES =    glob/libglob.a
+make_LDFLAGS =
+libglob_a_LIBADD =
+libglob_a_OBJECTS =  %GLOB_OBJECTS%
+noinst_LIBRARIES =	glob/libglob.a
+CFLAGS = -O2 -g
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+TEXI2DVI = texi2dvi
+TEXINFO_TEX = $(srcdir)/texinfo.tex
+INFO_DEPS = make.info
+DVIS = make.dvi
+TEXINFOS = make.texinfo
+man1dir = $(mandir)/man1
+MANS = $(man_MANS)
+
+NROFF = nroff
+DIST_COMMON =  README AUTHORS COPYING ChangeLog INSTALL Makefile.am  Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh.in config.h.in  configure configure.in getloadavg.c install-sh missing mkinstalldirs  stamp-h.in texinfo.tex
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP = --best
+SOURCES = $(make_SOURCES)
+OBJECTS = $(make_OBJECTS)
+HEADERS = $(wildcard $(srcdir)/*.h)
+
+default: all
+
+.SUFFIXES:
+.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f config.h
+
+maintainer-clean-hdr:
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do    if test -f $$p; then      echo "  $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p | sed '$(transform)'`";       $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p | sed '$(transform)'`;    else :; fi;  done
+
+uninstall-binPROGRAMS:
+	$(NORMAL_UNINSTALL)
+	list='$(bin_PROGRAMS)'; for p in $$list; do    rm -f $(bindir)/`echo $$p|sed '$(transform)'`.exe;  done
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+mostlyclean-compile:
+	-rm -f *.o *.exe make.new core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c *_tab.c
+
+maintainer-clean-compile:
+
+make: $(make_OBJECTS) $(make_DEPENDENCIES)
+	@command.com /c if exist make del make
+	@command.com /c if exist make.exe del make.exe
+	$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
+
+make.info: make.texinfo
+make.dvi: make.texinfo
+
+
+DVIPS = dvips
+
+.texi.info:
+	$(MAKEINFO) $(srcdir)/$< -o ./$@
+
+.texi.dvi:
+	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.texi:
+	$(MAKEINFO) $(srcdir)/$< -o ./$@
+
+.texinfo.info:
+	$(MAKEINFO) $(srcdir)/$< -o ./$@
+
+.texinfo:
+	$(MAKEINFO) $(srcdir)/$< -o ./$@
+
+.texinfo.dvi:
+	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.txi.info:
+	$(MAKEINFO) $(srcdir)/$< -o ./$@
+
+.txi.dvi:
+	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.dvi.ps:
+	$(DVIPS) $< -o $@
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(infodir)
+	@for file in $(INFO_DEPS) make.i; do    d=$(srcdir);    for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9] $$file[0-9] $$file[0-9][0-9]`; do      if test -f $$d/$$ifile; then        echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; else : ; fi;    done;  done
+	@$(POST_INSTALL)
+	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    for file in $(INFO_DEPS); do      echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";     install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;   done;  else : ; fi
+
+uninstall-info:
+	$(PRE_UNINSTALL)
+	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    ii=yes;  else ii=; fi;  for file in $(INFO_DEPS); do    test -z $ii || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file;  done
+	$(NORMAL_UNINSTALL)
+	for file in $(INFO_DEPS) make.i; do    (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9] $$file[0-9] $$file[0-9][0-9]);  done
+
+dist-info: $(INFO_DEPS)
+	for base in $(INFO_DEPS); do    d=$(srcdir);    for file in `cd $$d && eval echo $$base*`; do      test -f $(distdir)/$$file      || ln $$d/$$file $(distdir)/$$file 2> /dev/null      || cp -p $$d/$$file $(distdir)/$$file;    done;  done
+
+mostlyclean-aminfo:
+	-rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
+	  make.kys make.ps make.log make.pg make.toc make.tp make.tps \
+	  make.vr make.vrs make.op make.tr make.cv make.cn
+
+clean-aminfo:
+
+distclean-aminfo:
+
+maintainer-clean-aminfo:
+	for i in $(INFO_DEPS) make.i; do rm -f `eval echo $$i*`; done
+
+install-man1:
+	$(mkinstalldirs) $(DESTDIR)$(man1dir)
+	@list='$(man1_MANS)'; \
+	l2='$(man_MANS)'; for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+	done
+
+uninstall-man1:
+	@list='$(man1_MANS)'; \
+	l2='$(man_MANS)'; for i in $$l2; do \
+	  case "$$i" in \
+	    *.1*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
+	done
+install-man: $(MANS)
+	@$(NORMAL_INSTALL)
+	$(MAKE) install-man1
+uninstall-man:
+	@$(NORMAL_UNINSTALL)
+	$(MAKE) uninstall-man1
+
+# Assume that the only thing to do in glob is to build libglob.a,
+# but do a sanity check: if $SUBDIRS will ever have more than
+# a single directory, yell bloody murder.
+all-recursive:
+ifeq ($(words $(SUBDIRS)), 1)
+	@command.com /c if not exist glob\\nul md glob
+	@echo Making all in $(SUBDIRS)
+	$(MAKE) -C $(SUBDIRS) -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
+else
+	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
+	@$(EXIT_FAIL)
+endif
+
+$(SUBDIRS):
+	command.com /c md $@
+
+libglob.a: $(libglob_a_OBJECTS)
+	command.com /c if exist libglob.a del libglob.a
+	$(AR) cru libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
+	$(RANLIB) libglob.a
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive check-recursive:
+ifeq ($(words $(SUBDIRS)), 1)
+	@echo Making $(shell echo $@ | sed s/-recursive//) in $(SUBDIRS)
+	$(MAKE) -C $(SUBDIRS) -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+else
+	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
+	@$(EXIT_FAIL)
+endif
+
+tags-in-glob: $(libglob_a_SOURCES)
+	etags $(addprefix $(srcdir)/,$^) -o ./glob/TAGS
+
+tags-recursive:
+ifeq ($(words $(SUBDIRS)), 1)
+	$(MAKE) tags-in-glob
+else
+	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
+	@$(EXIT_FAIL)
+endif
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES)
+	mkid $(srcdir)/$(SOURCES) $(srcdir)/$(libglob_a_SOURCES) ./config.h $(HEADERS)
+
+TAGS: tags-recursive $(HEADERS) $(srcdir)/$(SOURCES) config.h $(TAGS_DEPENDENCIES)
+	etags -i ./glob/TAGS $(ETAGS_ARGS) $(srcdir)/$(SOURCES) ./config.h $(HEADERS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`;  cd $(distdir)/=build    && ../configure --srcdir=.. --prefix=$$dc_install_base    && $(MAKE)    && $(MAKE) dvi    && $(MAKE) check    && $(MAKE) install    && $(MAKE) installcheck    && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================";  echo "$(distdir).tar.gz is ready for distribution";  echo "========================"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
+distdir: $(DISTFILES)
+	rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do d=$(srcdir); test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; for subdir in $(SUBDIRS); do test -d $(distdir)/$$subdir || mkdir $(distdir)/$$subdir || exit 1; chmod 777 $(distdir)/$$subdir; (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir)/$$subdir distdir=../$(distdir)/$$subdir distdir) || exit 1; done
+	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
+	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
+
+info: $(INFO_DEPS) info-recursive
+dvi: $(DVIS) dvi-recursive
+check: all-am check-recursive check-local
+	@:
+installcheck: installcheck-recursive
+all-recursive-am: config.h
+	$(MAKE) all-recursive
+
+all-am: Makefile $(INFO_DEPS) $(PROGRAMS) config.h
+
+install-exec-am: install-binPROGRAMS
+
+install-data-am: install-info-am
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info
+
+install-exec: install-exec-recursive install-exec-am
+	@$(NORMAL_INSTALL)
+
+install-data: install-data-recursive install-data-am
+	@$(NORMAL_INSTALL)
+
+install: install-recursive install-exec-am install-data-am
+	@:
+
+uninstall: uninstall-recursive uninstall-am
+
+all: all-recursive-am all-am
+
+install-strip:
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs: installdirs-recursive
+	$(mkinstalldirs)  $(bindir) $(infodir)
+
+
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f Makefile $(DISTCLEANFILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS  mostlyclean-compile mostlyclean-aminfo mostlyclean-tags  mostlyclean-generic
+
+clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo  clean-tags clean-generic mostlyclean-am
+
+distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile  distclean-aminfo distclean-tags distclean-generic  clean-am
+
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS  maintainer-clean-compile maintainer-clean-aminfo  maintainer-clean-tags maintainer-clean-generic  distclean-am
+
+mostlyclean:  mostlyclean-recursive mostlyclean-am
+
+clean: clean-noinstLIBRARIES clean-recursive clean-am
+
+distclean:  distclean-recursive distclean-am
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-recursive maintainer-clean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f config.status
+
+.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
+maintainer-clean-hdr mostlyclean-binPROGRAMS distclean-binPROGRAMS \
+clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
+install-binPROGRAMS mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile install-info-am uninstall-info \
+mostlyclean-aminfo distclean-aminfo clean-aminfo \
+maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive check-am \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir \
+mostlyclean-depend distclean-depend clean-depend \
+maintainer-clean-depend info dvi check-local installcheck \
+all-recursive-am all-am install-exec-am install-data-am uninstall-am \
+install-exec install-data install uninstall all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# --------------- Local DIST Section
+
+# Install the w32 subdirectory
+#
+dist-hook:
+	(cd $(srcdir); \
+	 w32=`find w32 -follow \( -name CVS -prune \) -o -type f -print`; \
+	 tar chf - $$w32) \
+	| (cd $(distdir); tar xfBp -)
+
+# --------------- Local CHECK Section
+
+# Note: check-loadavg is NOT a prerequisite of check-local, since
+# there's no uptime utility, and the test it does doesn't make sense
+# on MSDOS anyway.
+check-local: check-shell check-regression
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-shell check-regression
+
+# > check-shell
+#
+# check-shell is designed to fail if they don't have a Unixy shell
+# installed.  The test suite requires such a shell.
+check-shell:
+	@echo If Make says Error -1, you do not have Unix-style shell installed
+	@foo=bar.exe :
+
+# > check-loadavg
+#
+loadavg: loadavg.c config.h
+	@rm -f loadavg
+	$(LINK) -DTEST $(make_LDFLAGS) loadavg.c $(LIBS)
+# We copy getloadavg.c into a different file rather than compiling it
+# directly because some compilers clobber getloadavg.o in the process.
+loadavg.c: getloadavg.c
+	ln $(srcdir)/getloadavg.c loadavg.c || \
+	cp $(srcdir)/getloadavg.c loadavg.c
+check-loadavg: loadavg
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code believes:
+	-./loadavg
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found.  Look in MAKE_TEST if
+# specified, or else in the srcdir or the distdir, their parents, and _their_
+# parents.
+#
+check-regression:
+	@if test -f "$(srcdir)/tests/run_make_tests"; then \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		   rm -rf tests/$$f; cp -pr $(srcdir)/tests/$$f tests; \
+		 done ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	 else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	 fi
+
+# --------------- Maintainer's Section
+
+# Note this requires GNU make.  Not to worry, since it will only be included
+# in the Makefile if we're in the maintainer's environment.
+#include $(srcdir)/maintMakefile
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Makefile.am

@@ -0,0 +1,145 @@
+# This is a -*-Makefile-*-, or close enough
+
+AUTOMAKE_OPTIONS = 1.4
+
+bin_PROGRAMS =	make
+
+make_SOURCES =	main.c commands.c job.c dir.c file.c misc.c read.c remake.c \
+		rule.c implicit.c default.c variable.c expand.c function.c \
+		vpath.c version.c ar.c arscan.c remote-$(REMOTE).c \
+		commands.h dep.h filedef.h job.h make.h rule.h variable.h \
+		signame.c signame.h \
+		getopt.c getopt1.c getopt.h
+make_LDADD =	@LIBOBJS@ @ALLOCA@ @GLOBLIB@
+
+info_TEXINFOS =	make.texinfo
+man_MANS =	make.1
+
+INCLUDES =	-DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
+
+EXTRA_DIST = 	README build.sh.in $(man_MANS) README.customs remote-cstms.c\
+		make-stds.texi texinfo.tex SCOPTIONS SMakefile\
+		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h\
+		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
+		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat\
+		readme.vms makefile.vms makefile.com config.h-vms vmsdir.h\
+		vmsfunctions.c vmsify.c
+
+SUBDIRS =	glob
+
+MOSTLYCLEANFILES = loadavg.c
+CLEANFILES =	loadavg
+
+MAKE_HOST = @MAKE_HOST@
+
+
+# --------------- Local INSTALL Section
+
+# If necessary, change the gid of the app and turn on the setgid flag.
+#
+
+# Whether or not make needs to be installed setgid.
+# The value should be either `true' or `false'.
+# On many systems, the getloadavg function (used to implement the `-l'
+# switch) will not work unless make is installed setgid kmem.
+#
+inst_setgid = @NEED_SETGID@
+
+# Install make setgid to this group so it can get the load average.
+#
+inst_group = @KMEM_GROUP@
+
+install-exec-local:
+	@if $(inst_setgid); then \
+	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
+	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
+	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
+	   else \
+	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
+	     echo "otherwise the \`-l' option will probably not work."; \
+	     echo "You may need special privileges to complete the installation"; \
+	     echo "of $$app."; \
+	   fi; \
+	 else true; fi
+
+# --------------- Local DIST Section
+
+# Install the w32 and tests subdirectories
+#
+dist-hook:
+	(cd $(srcdir); \
+	 sub=`find w32 tests -follow \( -name CVS -prune -o -name work -prune \) -o \( -name \*.orig -o -name \*.rej -o -name \*~ -prune \) -o -type f -print`; \
+	 tar chf - $$sub) \
+	| (cd $(distdir); tar xfBp -)
+
+
+# --------------- Local CHECK Section
+
+check-local: check-regression check-loadavg
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-regression
+
+# > check-loadavg
+#
+loadavg: loadavg.c config.h
+	@rm -f loadavg
+	$(LINK) $(DEFS) $(CPPFLAGS) -DTEST $(make_LDFLAGS) loadavg.c $(LIBS)
+
+# We copy getloadavg.c into a different file rather than compiling it
+# directly because some compilers clobber getloadavg.o in the process.
+#
+loadavg.c: getloadavg.c
+	ln $(srcdir)/getloadavg.c loadavg.c || \
+	  cp $(srcdir)/getloadavg.c loadavg.c
+
+check-loadavg: loadavg
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code believes:
+	-./loadavg
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found and we can find perl.
+# If we're building outside the tree, we use symlinks to make a local copy of
+# the test suite.  Unfortunately the test suite itself isn't localizable yet.
+#
+MAKETESTFLAGS =
+
+check-regression:
+	@if test -f "$(srcdir)/tests/run_make_tests"; then \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 rm -f srctests; \
+		 if ln -s "$(srcdir)/tests" srctests; then \
+		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
+		   done; fi ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	 else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	 fi
+
+
+# --------------- Local CLEAN section
+
+maintainer-clean-local:
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+
+
+# --------------- Maintainer's Section
+
+@MAINT_MAKEFILE@

Makefile.ami

@@ -1,9 +1,9 @@
 # NOTE: If you have no `make' program at all to process this makefile, run
 # `build.sh' instead.
 #
-# Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
 # This file is part of GNU Make.
-# 
+#
 # GNU Make is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
@@ -11,29 +11,24 @@
 #
 # GNU Make is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
 # GNU General Public License for more details.
-# 
+#
 # You should have received a copy of the GNU General Public License
 # along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Makefile for GNU Make
 #
 
-# Ultrix 2.2 make doesn't expand the value of VPATH.
-VPATH = @srcdir@
-# This must repeat the value, because configure will remove `VPATH = .'.
-srcdir = @srcdir@
+CC = sc
+RM = delete
 
-CC = @CC@
-
-CFLAGS = @CFLAGS@
-LDFLAGS = @LDFLAGS@
-
-# How to invoke ranlib.  This is only used by the `glob' subdirectory.
-RANLIB = @RANLIB@
+CFLAGS =
+CPPFLAGS =
+LDFLAGS =
 
 # Define these for your system as follows:
 #	-DNO_ARCHIVES		To disable `ar' archive support.
@@ -44,16 +39,16 @@ RANLIB = @RANLIB@
 #				so beware.
 # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
 # See also `config.h'.
-defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
+defines =
 
 # Which flavor of remote job execution support to use.
 # The code is found in `remote-$(REMOTE).c'.
-REMOTE = @REMOTE@
+REMOTE = stub
 
 # If you are using the GNU C library, or have the GNU getopt functions in
 # your C library, you can comment these out.
 GETOPT = getopt.o getopt1.o
-GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
+GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
 
 # If you are using the GNU C library, or have the GNU glob functions in
 # your C library, you can comment this out.  GNU make uses special hooks
@@ -61,36 +56,36 @@ GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
 # cache for globbing), so you must use the GNU functions even if your
 # system's C library has the 1003.2 glob functions already.  Also, the glob
 # functions in the AIX and HPUX C libraries are said to be buggy.
-GLOB = glob/libglob.a
+GLOB = glob/glob.lib
 
 # If your system doesn't have alloca, or the one provided is bad, define this.
-ALLOCA = @ALLOCA@
-ALLOCA_SRC = $(srcdir)/alloca.c
+ALLOCA = alloca.o
+ALLOCA_SRC = $(srcdir)alloca.c
 
 # If your system needs extra libraries loaded in, define them here.
 # System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
 # libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
 # alloca.c instead on those machines.
-LOADLIBES = @LIBS@
+LOADLIBES =
 
 # Any extra object files your system needs.
-extras = @LIBOBJS@
+extras = amiga.o
 
 # Common prefix for machine-independent installed files.
-prefix = /usr/local
+prefix =
 # Common prefix for machine-dependent installed files.
-exec_prefix = $(prefix)
+exec_prefix =
 
 # Directory to install `make' in.
-bindir = $(exec_prefix)/bin
+bindir = sc:c
 # Directory to find libraries in for `-lXXX'.
-libdir = $(exec_prefix)/lib
+libdir = lib:
 # Directory to search by default for included makefiles.
-includedir = $(prefix)/include
+includedir = include:
 # Directory to install the Info files in.
-infodir = $(prefix)/info
+infodir = doc:
 # Directory to install the man page in.
-mandir = $(prefix)/man/man$(manext)
+mandir = t:
 # Number to put on the man page filename.
 manext = 1
 # Prefix to put on installed `make' binary file name.
@@ -102,16 +97,16 @@ manprefix = $(binprefix)
 # The value should be either `true' or `false'.
 # On many systems, the getloadavg function (used to implement the `-l'
 # switch) will not work unless make is installed setgid kmem.
-install_setgid = @NEED_SETGID@
+install_setgid = false
 # Install make setgid to this group so it can read /dev/kmem.
-group = @KMEM_GROUP@
+group = sys
 
 # Program to install `make'.
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = copy
 # Program to install the man page.
-INSTALL_DATA = @INSTALL_DATA@
+INSTALL_DATA = copy
 # Generic install program.
-INSTALL = @INSTALL@
+INSTALL = copy
 
 # Program to format Texinfo source into Info files.
 MAKEINFO = makeinfo
@@ -119,81 +114,81 @@ MAKEINFO = makeinfo
 TEXI2DVI = texi2dvi
 
 # Programs to make tags files.
-ETAGS = etags -tw
-CTAGS = ctags -tw
+ETAGS = etags -w
+CTAGS = ctags -w
 
 objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
        rule.o implicit.o default.o variable.o expand.o function.o	\
-       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o	\
-       $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
-srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c		\
-       $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c		\
-       $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c		\
-       $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c	\
-       $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c	\
-       $(srcdir)/vpath.c $(srcdir)/version.c				\
-       $(srcdir)/remote-$(REMOTE).c					\
-       $(srcdir)/ar.c $(srcdir)/arscan.c				\
-       $(srcdir)/signame.c $(srcdir)/signame.h $(GETOPT_SRC)		\
-       $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/file.h		\
-       $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h		\
-       $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
+       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
+       $(GETOPT) $(ALLOCA) $(extras)
+srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
+       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
+       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
+       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
+       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
+       $(srcdir)vpath.c $(srcdir)version.c                            \
+       $(srcdir)remote-$(REMOTE).c                                     \
+       $(srcdir)ar.c $(srcdir)arscan.c                                \
+       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)            \
+       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)filedep.h            \
+       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
+       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
 
 
 .SUFFIXES:
 .SUFFIXES: .o .c .h .ps .dvi .info .texinfo
 
 all: make
-check: # No tests.
 info: make.info
 dvi: make.dvi
-# Some makes apparently use .PHONY as the default goal is it is before `all'.
+# Some makes apparently use .PHONY as the default goal if it is before `all'.
 .PHONY: all check info dvi
 
 make.info: make.texinfo
-	$(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
+	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
 
 make.dvi: make.texinfo
-	$(TEXI2DVI) $(srcdir)/make.texinfo
+	$(TEXI2DVI) $(srcdir)make.texinfo
 
 make.ps: make.dvi
 	dvi2ps make.dvi > make.ps
 
-make: $(objs)
-	$(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
-	mv -f make.new make
+make: $(objs) $(GLOB)
+	$(CC) Link $(LDFLAGS) $(objs) Lib $(GLOB) $(LOADLIBES) To make.new
+	-delete make
+	rename make.new make
+
+TMPFILE = t:Make$$
+
+$(GLOB):
+	cd glob @@\
+	$(MAKE) -$(MAKEFLAGS) -f Makefile
 
 # -I. is needed to find config.h in the build directory.
+OUTPUT_OPTION =
 .c.o:
-	$(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
-	      $(CFLAGS) $< $(OUTPUT_OPTION)
+	$(CC) $(defines) IDir "" IDir glob \
+	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
 
 # For some losing Unix makes.
 SHELL = /bin/sh
-MAKE = make
+#@SET_MAKE@
 
 glob/libglob.a: FORCE config.h
-	cd glob; $(MAKE) CC='$(CC)' CFLAGS='$(CFLAGS) -I..' \
-			 CPPFLAGS='$(CPPFLAGS) -DHAVE_CONFIG_H' \
-			 RANLIB='$(RANLIB)' \
-			 libglob.a
+	cd glob; $(MAKE) libglob.a
 FORCE:
 
-tagsrcs = $(srcs) $(srcdir)/remote-*.c
-TAGS: $(tagsrcs)
-	$(ETAGS) $(tagsrcs)
-tags: $(tagsrcs)
-	$(CTAGS) $(tagsrcs)
+tagsrcs = $(srcs) $(srcdir)remote-*.c
 
 .PHONY: install installdirs
 install: installdirs \
-	 $(bindir)/$(binprefix)make $(infodir)/make.info \
-	 $(mandir)/$(manprefix)make.$(manext)
+	 $(bindir)$(binprefix)make $(infodir)make.info \
+	 $(mandir)$(manprefix)make.$(manext)
 
 installdirs:
 	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
 
-$(bindir)/$(binprefix)make: make
+$(bindir)$(binprefix)make: make
 	$(INSTALL_PROGRAM) make $@.new
 	@if $(install_setgid); then \
 	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
@@ -201,15 +196,15 @@ $(bindir)/$(binprefix)make: make
 	   else \
 	     echo "$@ needs to be owned by group $(group) and setgid;"; \
 	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special priveleges to install $@."; \
+	     echo "You may need special privileges to install $@."; \
 	   fi; \
 	 else true; fi
 # Some systems can't deal with renaming onto a running binary.
-	-rm -f $@.old
+	-$(RM) $@.old
 	-mv $@ $@.old
 	mv $@.new $@
 
-$(infodir)/make.info: make.info
+$(infodir)make.info: make.info
 	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
 	for file in $${dir}/make.info*; do \
 	  name="`basename $$file`"; \
@@ -222,11 +217,12 @@ $(infodir)/make.info: make.info
 # We use `$(SHELL) -c' because some shells do not
 # fail gracefully when there is an unknown command.
 	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
+	  if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
 	  install-info --infodir=$(infodir) $$dir/make.info; \
 	else true; fi
 
-$(mandir)/$(manprefix)make.$(manext): make.man
-	$(INSTALL_DATA) $(srcdir)/make.man $@
+$(mandir)$(manprefix)make.$(manext): make.man
+	$(INSTALL_DATA) $(srcdir)make.man $@
 
 
 loadavg: loadavg.c config.h
@@ -235,8 +231,8 @@ loadavg: loadavg.c config.h
 # We copy getloadavg.c into a different file rather than compiling it
 # directly because some compilers clobber getloadavg.o in the process.
 loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	cp $(srcdir)/getloadavg.c loadavg.c
+	ln $(srcdir)getloadavg.c loadavg.c || \
+	cp $(srcdir)getloadavg.c loadavg.c
 check-loadavg: loadavg
 	@echo The system uptime program believes the load average to be:
 	-uptime
@@ -247,33 +243,23 @@ check: check-loadavg
 
 .PHONY: clean realclean distclean mostlyclean
 clean: glob-clean
-	-rm -f make loadavg *.o core make.info* make.dvi
+	-$(RM) make loadavg "#?.o" core make.dvi
+
 distclean: clean glob-realclean
-	-rm -f Makefile config.h config.status build.sh stamp-config
-	-rm -f TAGS tags
-	-rm -f make.?? make.??s make.log make.toc make.*aux
-	-rm -f loadavg.c
+	-$(RM) Makefile config.h config.status build.sh
+	-$(RM) config.log config.cache
+	-$(RM) TAGS tags
+	-$(RM) make.?? make.??s make.log make.toc make.*aux
+	-$(RM) loadavg.c
+
 realclean: distclean
+	-$(RM) make.info*
 mostlyclean: clean
 
 .PHONY: glob-clean glob-realclean
 glob-clean glob-realclean:
-	cd glob; $(MAKE) $@
-
-Makefile: config.status $(srcdir)/Makefile.in
-	$(SHELL) config.status
-glob/Makefile: config.status $(srcdir)/glob/Makefile.in
-	$(SHELL) config.status
-config.h: stamp-config ;
-stamp-config: config.status $(srcdir)/config.h.in
-	$(SHELL) config.status
-	touch stamp-config
-
-# These rules cause too much trouble.
-#configure: configure.in
-#	autoconf $(ACFLAGS)
-#config.h.in: configure.in
-#	autoheader $(ACFLAGS)
+	cd glob @@\
+	$(MAKE) $@
 
 # This tells versions [3.59,3.63) of GNU make not to export all variables.
 .NOEXPORT:
@@ -285,3 +271,35 @@ $(objs): config.h
 
 # Automatically generated dependencies will be put at the end of the file.
 
+# Automatically generated dependencies.
+commands.o: commands.c make.h dep.h filedef.h variable.h job.h \
+ commands.h
+job.o: job.c make.h job.h filedef.h commands.h variable.h
+dir.o: dir.c make.h
+file.o: file.c make.h dep.h filedef.h job.h commands.h variable.h
+misc.o: misc.c make.h dep.h
+main.o: main.c make.h dep.h filedef.h variable.h job.h commands.h \
+ getopt.h
+read.o: read.c make.h dep.h filedef.h job.h commands.h variable.h \
+ glob/glob.h
+remake.o: remake.c make.h filedef.h job.h commands.h dep.h
+rule.o: rule.c make.h dep.h filedef.h job.h commands.h variable.h \
+ rule.h
+implicit.o: implicit.c make.h rule.h dep.h filedef.h
+default.o: default.c make.h rule.h dep.h filedef.h job.h commands.h \
+ variable.h
+variable.o: variable.c make.h dep.h filedef.h job.h commands.h \
+ variable.h
+expand.o: expand.c make.h filedef.h job.h commands.h variable.h
+function.o: function.c make.h filedef.h variable.h dep.h job.h \
+ commands.h amiga.h
+vpath.o: vpath.c make.h filedef.h variable.h
+version.o: version.c
+ar.o: ar.c make.h filedef.h dep.h
+arscan.o: arscan.c make.h
+signame.o: signame.c signame.h
+remote-stub.o: remote-stub.c make.h filedef.h job.h commands.h
+getopt.o: getopt.c
+getopt1.o : getopt1.c getopt.h
+getloadavg.o: getloadavg.c
+amiga.o: amiga.c make.h variable.h amiga.h

NEWS

@@ -0,0 +1,730 @@
+GNU make NEWS                                               -*-indented-text-*-
+  History of user-visible changes.
+  17 Sep 1999
+
+Copyright (C) 1992,93,94,95,96,97,98,1999 Free Software Foundation, Inc.
+See the end for copying conditions.
+
+All changes mentioned here are more fully described in the GNU make
+manual, which is contained in this distribution as the file make.texinfo.
+
+Please send GNU make bug reports to bug-make@gnu.org.
+See the README file and the GNU make manual for details on sending bug
+reports.
+
+Version 3.78
+
+* Two new functions, $(error ...) and $(warning ...) are available.  The
+  former will cause make to fail and exit immediately upon expansion of
+  the function, with the text provided as the error message.  The latter
+  causes the text provided to be printed as a warning message, but make
+  proceeds normally.
+
+* A new function $(call ...) is available.  This allows users to create
+  their own parameterized macros and invoke them later.  Original
+  implementation of this function was provided by Han-Wen Nienhuys
+  <hanwen@cs.uu.nl>.
+
+* A new function $(if ...) is available.  It provides if-then-else
+  capabilities in a builtin function.  Original implementation of this
+  function was provided by Han-Wen Nienhuys <hanwen@cs.uu.nl>.
+
+* Make defines a new variable, .LIBPATTERNS.  This variable controls how
+  library dependency expansion (dependencies like ``-lfoo'') is performed.
+
+* Make accepts CRLF sequences as well as traditional LF, for
+  compatibility with makefiles created on other operating systems.
+
+* Make accepts a new option: -R, or --no-builtin-variables.  This option
+  disables the definition of the rule-specific builtin variables (CC,
+  LD, AR, etc.).  Specifying this option forces -r (--no-builtin-rules)
+  as well.
+
+* A "job server" feature, suggested by Howard Chu <hyc@highlandsun.com>.
+
+  On systems that support POSIX pipe(2) semantics, GNU make can now pass
+  -jN options to submakes rather than forcing them all to use -j1.  The
+  top make and all its sub-make processes use a pipe to communicate with
+  each other to ensure that no more than N jobs are started across all
+  makes.  To get the old behavior of -j back, you can configure make
+  with the --disable-job-server option.
+
+* The confusing term "dependency" has been replaced by the more accurate
+  and standard term "prerequisite", both in the manual and in all GNU make
+  output.
+
+* GNU make supports the "big archive" library format introduced in AIX 4.3.
+
+* GNU make supports large files on AIX, HP-UX, and IRIX.  These changes
+  were provided by Paul Eggert <eggert@twinsun.com>.  (Large file
+  support for Solaris and Linux was introduced in 3.77, but the
+  configuration had issues: these have also been resolved).
+
+* The Windows 95/98/NT (W32) version of GNU make now has native support
+  for the Cygnus Cygwin release B20.1 shell (bash).
+
+* The GNU make regression test suite, long available separately "under
+  the table", has been integrated into the release.  You can invoke it
+  by running "make check" in the distribution.  Note that it requires
+  Perl (either Perl 4 or Perl 5) to run.
+
+Version 3.77
+
+* Implement BSD make's "?=" variable assignment operator.  The variable
+  is assigned the specified value only if that variable is not already
+  defined.
+
+* Make defines a new variable, "CURDIR", to contain the current working
+  directory (after the -C option, if any, has been processed).
+  Modifying this variable has no effect on the operation of make.
+
+* Make defines a new default RCS rule, for new-style master file
+  storage: ``% :: RCS/%'' (note no ``,v'' suffix).
+
+  Make defines new default rules for DOS-style C++ file naming
+  conventions, with ``.cpp'' suffixes.  All the same rules as for
+  ``.cc'' and ``.C'' suffixes are provided, along with LINK.cpp and
+  COMPILE.cpp macros (which default to the same value as LINK.cc and
+  COMPILE.cc).  Note CPPFLAGS is still C preprocessor flags!  You should
+  use CXXFLAGS to change C++ compiler flags.
+
+* A new feature, "target-specific variable values", has been added.
+  This is a large change so please see the appropriate sections of the
+  manual for full details.  Briefly, syntax like this:
+
+    TARGET: VARIABLE = VALUE
+
+  defines VARIABLE as VALUE within the context of TARGET.  This is
+  similar to SunOS make's "TARGET := VARIABLE = VALUE" feature.  Note
+  that the assignment may be of any type, not just recursive, and that
+  the override keyword is available.
+
+  COMPATIBILITY: This new syntax means that if you have any rules where
+  the first or second dependency has an equal sign (=) in its name,
+  you'll have to escape them with a backslash: "foo : bar\=baz".
+  Further, if you have any dependencies which already contain "\=",
+  you'll have to escape both of them: "foo : bar\\\=baz".
+
+* A new appendix listing the most common error and warning messages
+  generated by GNU make, with some explanation, has been added to the
+  GNU make User's Manual.
+
+* Updates to the GNU make Customs library support (see README.customs).
+
+* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32),
+  and to the DOS port from Eli Zaretski (see README.DOS).
+
+Version 3.76.1
+
+* Small (but serious) bug fix.  Quick rollout to get into the GNU source CD.
+
+Version 3.76
+
+* GNU make now uses automake to control Makefile.in generation.  This
+  should make it more consistent with the GNU standards.
+
+* VPATH functionality has been changed to incorporate the VPATH+ patch,
+  previously maintained by Paul Smith <psmith@baynetworks.com>.  See the
+  manual.
+
+* Make defines a new variable, `MAKECMDGOALS', to contain the goals that
+  were specified on the command line, if any.  Modifying this variable
+  has no effect on the operation of make.
+
+* A new function, `$(wordlist S,E,TEXT)', is available: it returns a
+  list of words from number S to number E (inclusive) of TEXT.
+
+* Instead of an error, detection of future modification times gives a
+  warning and continues.  The warning is repeated just before GNU make
+  exits, so it is less likely to be lost.
+
+* Fix the $(basename) and $(suffix) functions so they only operate on
+  the last filename, not the entire string:
+
+      Command              Old Result             New Result
+      -------              ----------             ----------
+    $(basename a.b)        a                      a
+    $(basename a.b/c)      a                      a.b/c
+    $(suffix a.b)          b                      b
+    $(suffix a.b/c)        b/c                    <empty>
+
+* The $(strip) function now removes newlines as well as TABs and spaces.
+
+* The $(shell) function now changes CRLF (\r\n) pairs to a space as well
+  as newlines (\n).
+
+* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32).
+
+* Eli Zaretskii has updated the port to 32-bit protected mode on MSDOS
+  and MS-Windows, building with the DJGPP v2 port of GNU C/C++ compiler
+  and utilities.  See README.DOS for details, and direct all questions
+  concerning this port to Eli Zaretskii <eliz@is.elta.co.il> or DJ
+  Delorie <dj@delorie.com>.
+
+* John W. Eaton has updated the VMS port to support libraries and VPATH.
+
+Version 3.75
+
+* The directory messages printed by `-w' and implicitly in sub-makes,
+  are now omitted if Make runs no commands and has no other messages to print.
+
+* Make now detects files that for whatever reason have modification times
+  in the future and gives an error.  Files with such impossible timestamps
+  can result from unsynchronized clocks, or archived distributions
+  containing bogus timestamps; they confuse Make's dependency engine
+  thoroughly.
+
+* The new directive `sinclude' is now recognized as another name for
+  `-include', for compatibility with some other Makes.
+
+* Aaron Digulla has contributed a port to AmigaDOS.  See README.Amiga for
+  details, and direct all Amiga-related questions to <digulla@fh-konstanz.de>.
+
+* Rob Tulloh of Tivoli Systems has contributed a port to Windows NT or 95.
+  See README.W32 for details, and direct all Windows-related questions to
+  <rob_tulloh@tivoli.com>.
+
+Version 3.73
+
+* Converted to use Autoconf version 2, so `configure' has some new options.
+  See INSTALL for details.
+
+* You can now send a SIGUSR1 signal to Make to toggle printing of debugging
+  output enabled by -d, at any time during the run.
+
+Version 3.72
+
+* DJ Delorie has ported Make to MS-DOS using the GO32 extender.
+  He is maintaining the DOS port, not the GNU Make maintainer;
+  please direct bugs and questions for DOS to <djgpp@sun.soe.clarkson.edu>.
+  MS-DOS binaries are available for FTP from ftp.simtel.net in
+  /pub/simtelnet/gnu/djgpp/.
+
+* The `MAKEFLAGS' variable (in the environment or in a makefile) can now
+  contain variable definitions itself; these are treated just like
+  command-line variable definitions.  Make will automatically insert any
+  variable definitions from the environment value of `MAKEFLAGS' or from
+  the command line, into the `MAKEFLAGS' value exported to children.  The
+  `MAKEOVERRIDES' variable previously included in the value of `$(MAKE)'
+  for sub-makes is now included in `MAKEFLAGS' instead.  As before, you can
+  reset `MAKEOVERRIDES' in your makefile to avoid putting all the variables
+  in the environment when its size is limited.
+
+* If `.DELETE_ON_ERROR' appears as a target, Make will delete the target of
+  a rule if it has changed when its commands exit with a nonzero status,
+  just as when the commands get a signal.
+
+* The automatic variable `$+' is new.  It lists all the dependencies like
+  `$^', but preserves duplicates listed in the makefile.  This is useful
+  for linking rules, where library files sometimes need to be listed twice
+  in the link order.
+
+* You can now specify the `.IGNORE' and `.SILENT' special targets with
+  dependencies to limit their effects to those files.  If a file appears as
+  a dependency of `.IGNORE', then errors will be ignored while running the
+  commands to update that file.  Likewise if a file appears as a dependency
+  of `.SILENT', then the commands to update that file will not be printed
+  before they are run.  (This change was made to conform to POSIX.2.)
+
+Version 3.71
+
+* The automatic variables `$(@D)', `$(%D)', `$(*D)', `$(<D)', `$(?D)', and
+  `$(^D)' now omit the trailing slash from the directory name.  (This change
+  was made to comply with POSIX.2.)
+
+* The source distribution now includes the Info files for the Make manual.
+  There is no longer a separate distribution containing Info and DVI files.
+
+* You can now set the variables `binprefix' and/or `manprefix' in
+  Makefile.in (or on the command line when installing) to install GNU make
+  under a name other than `make' (i.e., ``make binprefix=g install''
+  installs GNU make as `gmake').
+
+* The built-in Texinfo rules use the new variables `TEXI2DVI_FLAGS' for
+  flags to the `texi2dvi' script, and `MAKEINFO_FLAGS' for flags to the
+  Makeinfo program.
+
+* The exit status of Make when it runs into errors is now 2 instead of 1.
+  The exit status is 1 only when using -q and some target is not up to date.
+  (This change was made to comply with POSIX.2.)
+
+Version 3.70
+
+* It is no longer a fatal error to have a NUL character in a makefile.
+  You should never put a NUL in a makefile because it can have strange
+  results, but otherwise empty lines full of NULs (such as produced by
+  the `xmkmf' program) will always work fine.
+
+* The error messages for nonexistent included makefiles now refer to the
+  makefile name and line number where the `include' appeared, so Emacs's
+  C-x ` command takes you there (in case it's a typo you need to fix).
+
+Version 3.69
+
+* Implicit rule search for archive member references is now done in the
+  opposite order from previous versions: the whole target name `LIB(MEM)'
+  first, and just the member name and parentheses `(MEM)' second.
+
+* Make now gives an error for an unterminated variable or function reference.
+  For example, `$(foo' with no matching `)' or `${bar' with no matching `}'.
+
+* The new default variable `MAKE_VERSION' gives the version number of
+  Make, and a string describing the remote job support compiled in (if any).
+  Thus the value (in this release) is something like `3.69' or `3.69-Customs'.
+
+* Commands in an invocation of the `shell' function are no longer run with
+  a modified environment like target commands are.  As in versions before
+  3.68, they now run with the environment that `make' started with.  We
+  have reversed the change made in version 3.68 because it turned out to
+  cause a paradoxical situation in cases like:
+
+	export variable = $(shell echo value)
+
+  When Make attempted to put this variable in the environment for a target
+  command, it would try expand the value by running the shell command
+  `echo value'.  In version 3.68, because it constructed an environment
+  for that shell command in the same way, Make would begin to go into an
+  infinite loop and then get a fatal error when it detected the loop.
+
+* The commands given for `.DEFAULT' are now used for phony targets with no
+  commands.
+
+Version 3.68
+
+* You can list several archive member names inside parenthesis:
+  `lib(mem1 mem2 mem3)' is equivalent to `lib(mem1) lib(mem2) lib(mem3)'.
+
+* You can use wildcards inside archive member references.  For example,
+  `lib(*.o)' expands to all existing members of `lib' whose names end in
+  `.o' (e.g. `lib(a.o) lib(b.o)'); `*.a(*.o)' expands to all such members
+  of all existing files whose names end in `.a' (e.g. `foo.a(a.o)
+  foo.a(b.o) bar.a(c.o) bar.a(d.o)'.
+
+* A suffix rule `.X.a' now produces two pattern rules:
+	(%.o): %.X	# Previous versions produced only this.
+	%.a: %.X	# Now produces this as well, just like other suffixes.
+
+* The new flag `--warn-undefined-variables' says to issue a warning message
+  whenever Make expands a reference to an undefined variable.
+
+* The new `-include' directive is just like `include' except that there is
+  no error (not even a warning) for a nonexistent makefile.
+
+* Commands in an invocation of the `shell' function are now run with a
+  modified environment like target commands are, so you can use `export' et
+  al to set up variables for them.  They used to run with the environment
+  that `make' started with.
+
+Version 3.66
+
+* `make --version' (or `make -v') now exits immediately after printing
+  the version number.
+
+Version 3.65
+
+* Make now supports long-named members in `ar' archive files.
+
+Version 3.64
+
+* Make now supports the `+=' syntax for a variable definition which appends
+  to the variable's previous value.  See the section `Appending More Text
+  to Variables' in the manual for full details.
+
+* The new option `--no-print-directory' inhibits the `-w' or
+  `--print-directory' feature.  Make turns on `--print-directory'
+  automatically if you use `-C' or `--directory', and in sub-makes; some
+  users have found this behavior undesirable.
+
+* The built-in implicit rules now support the alternative extension
+  `.txinfo' for Texinfo files, just like `.texinfo' and `.texi'.
+
+Version 3.63
+
+* Make now uses a standard GNU `configure' script.  See the new file
+  INSTALL for the new (and much simpler) installation procedure.
+
+* There is now a shell script to build Make the first time, if you have no
+  other `make' program.  `build.sh' is created by `configure'; see README.
+
+* GNU Make now completely conforms to the POSIX.2 specification for `make'.
+
+* Elements of the `$^' and `$?' automatic variables that are archive
+  member references now list only the member name, as in Unix and POSIX.2.
+
+* You should no longer ever need to specify the `-w' switch, which prints
+  the current directory before and after Make runs.  The `-C' switch to
+  change directory, and recursive use of Make, now set `-w' automatically.
+
+* Multiple double-colon rules for the same target will no longer have their
+  commands run simultaneously under -j, as this could result in the two
+  commands trying to change the file at the same time and interfering with
+  one another.
+
+* The `SHELL' variable is now never taken from the environment.
+  Each makefile that wants a shell other than the default (/bin/sh) must
+  set SHELL itself.  SHELL is always exported to child processes.
+  This change was made for compatibility with POSIX.2.
+
+* Make now accepts long options.  There is now an informative usage message
+  that tells you what all the options are and what they do.  Try `make --help'.
+
+* There are two new directives: `export' and `unexport'.  All variables are
+  no longer automatically put into the environments of the commands that
+  Make runs.  Instead, only variables specified on the command line or in
+  the environment are exported by default.  To export others, use:
+	export VARIABLE
+  or you can define variables with:
+	export VARIABLE = VALUE
+  or:
+	export VARIABLE := VALUE
+  You can use just:
+	export
+  or:
+	.EXPORT_ALL_VARIABLES:
+  to get the old behavior.  See the node `Variables/Recursion' in the manual
+  for a full description.
+
+* The commands from the `.DEFAULT' special target are only applied to
+  targets which have no rules at all, not all targets with no commands.
+  This change was made for compatibility with Unix make.
+
+* All fatal error messages now contain `***', so they are easy to find in
+  compilation logs.
+
+* Dependency file names like `-lNAME' are now replaced with the actual file
+  name found, as with files found by normal directory search (VPATH).
+  The library file `libNAME.a' may now be found in the current directory,
+  which is checked before VPATH; the standard set of directories (/lib,
+  /usr/lib, /usr/local/lib) is now checked last.
+  See the node `Libraries/Search' in the manual for full details.
+
+* A single `include' directive can now specify more than one makefile to
+  include, like this:
+	include file1 file2
+  You can also use shell file name patterns in an `include' directive:
+	include *.mk
+
+* The default directories to search for included makefiles, and for
+  libraries specified with `-lNAME', are now set by configuration.
+
+* You can now use blanks as well as colons to separate the directories in a
+  search path for the `vpath' directive or the `VPATH' variable.
+
+* You can now use variables and functions in the left hand side of a
+  variable assignment, as in "$(foo)bar = value".
+
+* The `MAKE' variable is always defined as `$(MAKE_COMMAND) $(MAKEOVERRIDES)'.
+  The `MAKE_COMMAND' variable is now defined to the name with which make
+  was invoked.
+
+* The built-in rules for C++ compilation now use the variables `$(CXX)' and
+  `$(CXXFLAGS)' instead of `$(C++)' and `$(C++FLAGS)'.  The old names had
+  problems with shells that cannot have `+' in environment variable names.
+
+* The value of a recursively expanded variable is now expanded when putting
+  it into the environment for child processes.  This change was made for
+  compatibility with Unix make.
+
+* A rule with no targets before the `:' is now accepted and ignored.
+  This change was made for compatibility with SunOS 4 make.
+  We do not recommend that you write your makefiles to take advantage of this.
+
+* The `-I' switch can now be used in MAKEFLAGS, and are put there
+  automatically just like other switches.
+
+Version 3.61
+
+* Built-in rules for C++ source files with the `.C' suffix.
+  We still recommend that you use `.cc' instead.
+
+* If commands are given too many times for a single target,
+  the last set given is used, and a warning message is printed.
+
+* Error messages about makefiles are in standard GNU error format,
+  so C-x ` in Emacs works on them.
+
+* Dependencies of pattern rules which contain no % need not actually exist
+  if they can be created (just like dependencies which do have a %).
+
+Version 3.60
+
+* A message is always printed when Make decides there is nothing to be done.
+  It used to be that no message was printed for top-level phony targets
+  (because "`phony' is up to date" isn't quite right).  Now a different
+  message "Nothing to be done for `phony'" is printed in that case.
+
+* Archives on AIX now supposedly work.
+
+* When the commands specified for .DEFAULT are used to update a target,
+  the $< automatic variable is given the same value as $@ for that target.
+  This is how Unix make behaves, and this behavior is mandated by POSIX.2.
+
+Version 3.59
+
+* The -n, -q, and -t options are not put in the `MAKEFLAGS' and `MFLAG'
+  variables while remaking makefiles, so recursive makes done while remaking
+  makefiles will behave properly.
+
+* If the special target `.NOEXPORT' is specified in a makefile,
+  only variables that came from the environment and variables
+  defined on the command line are exported.
+
+Version 3.58
+
+* Suffix rules may have dependencies (which are ignored).
+
+Version 3.57
+
+* Dependencies of the form `-lLIB' are searched for as /usr/local/lib/libLIB.a
+  as well as libLIB.a in /usr/lib, /lib, the current directory, and VPATH.
+
+Version 3.55
+
+* There is now a Unix man page for GNU Make.  It is certainly not a replacement
+for the Texinfo manual, but it documents the basic functionality and the
+switches.  For full documentation, you should still read the Texinfo manual.
+Thanks to Dennis Morse of Stanford University for contributing the initial
+version of this.
+
+* Variables which are defined by default (e.g., `CC') will no longer be put
+into the environment for child processes.  (If these variables are reset by the
+environment, makefiles, or the command line, they will still go into the
+environment.)
+
+* Makefiles which have commands but no dependencies (and thus are always
+  considered out of date and in need of remaking), will not be remade (if they
+  were being remade only because they were makefiles).  This means that GNU
+  Make will no longer go into an infinite loop when fed the makefiles that
+  `imake' (necessary to build X Windows) produces.
+
+* There is no longer a warning for using the `vpath' directive with an explicit
+pathname (instead of a `%' pattern).
+
+Version 3.51
+
+* When removing intermediate files, only one `rm' command line is printed,
+listing all file names.
+
+* There are now automatic variables `$(^D)', `$(^F)', `$(?D)', and `$(?F)'.
+These are the directory-only and file-only versions of `$^' and `$?'.
+
+* Library dependencies given as `-lNAME' will use "libNAME.a" in the current
+directory if it exists.
+
+* The automatic variable `$($/)' is no longer defined.
+
+* Leading `+' characters on a command line make that line be executed even
+under -n, -t, or -q (as if the line contained `$(MAKE)').
+
+* For command lines containing `$(MAKE)', `${MAKE}', or leading `+' characters,
+only those lines are executed, not their entire rules.
+(This is how Unix make behaves for lines containing `$(MAKE)' or `${MAKE}'.)
+
+Version 3.50
+
+* Filenames in rules will now have ~ and ~USER expanded.
+
+* The `-p' output has been changed so it can be used as a makefile.
+(All information that isn't specified by makefiles is prefaced with comment
+characters.)
+
+Version 3.49
+
+* The % character can be quoted with backslash in implicit pattern rules,
+static pattern rules, `vpath' directives, and `patsubst', `filter', and
+`filter-out' functions.  A warning is issued if a `vpath' directive's
+pattern contains no %.
+
+* The `wildcard' variable expansion function now expands ~ and ~USER.
+
+* Messages indicating failed commands now contain the target name:
+	make: *** [target] Error 1
+
+* The `-p' output format has been changed somewhat to look more like
+makefile rules and to give all information that Make has about files.
+
+Version 3.48
+
+Version 3.47
+
+* The `-l' switch with no argument removes any previous load-average limit.
+
+* When the `-w' switch is in effect, and Make has updated makefiles,
+it will write a `Leaving directory' messagfe before re-executing itself.
+This makes the `directory change tracking' changes to Emacs's compilation
+commands work properly.
+
+Version 3.46
+
+* The automatic variable `$*' is now defined for explicit rules,
+as it is in Unix make.
+
+Version 3.45
+
+* The `-j' switch is now put in the MAKEFLAGS and MFLAGS variables when
+specified without an argument (indicating infinite jobs).
+The `-l' switch is not always put in the MAKEFLAGS and MFLAGS variables.
+
+* Make no longer checks hashed directories after running commands.
+The behavior implemented in 3.41 caused too much slowdown.
+
+Version 3.44
+
+* A dependency is NOT considered newer than its dependent if
+they have the same modification time.  The behavior implemented
+in 3.43 conflicts with RCS.
+
+Version 3.43
+
+* Dependency loops are no longer fatal errors.
+
+* A dependency is considered newer than its dependent if
+they have the same modification time.
+
+Version 3.42
+
+* The variables F77 and F77FLAGS are now set by default to $(FC) and
+$(FFLAGS).  Makefiles designed for System V make may use these variables in
+explicit rules and expect them to be set.  Unfortunately, there is no way to
+make setting these affect the Fortran implicit rules unless FC and FFLAGS
+are not used (and these are used by BSD make).
+
+Version 3.41
+
+* Make now checks to see if its hashed directories are changed by commands.
+Other makes that hash directories (Sun, 4.3 BSD) don't do this.
+
+Version 3.39
+
+* The `shell' function no longer captures standard error output.
+
+Version 3.32
+
+* A file beginning with a dot can be the default target if it also contains
+a slash (e.g., `../bin/foo').  (Unix make allows this as well.)
+
+Version 3.31
+
+* Archive member names are truncated to 15 characters.
+
+* Yet more USG stuff.
+
+* Minimal support for Microport System V (a 16-bit machine and a
+brain-damaged compiler).  This has even lower priority than other USG
+support, so if it gets beyond trivial, I will take it out completely.
+
+* Revamped default implicit rules (not much visible change).
+
+* The -d and -p options can come from the environment.
+
+Version 3.30
+
+* Improved support for USG and HPUX (hopefully).
+
+* A variable reference like `$(foo:a=b)', if `a' contains a `%', is
+equivalent to `$(patsubst a,b,$(foo))'.
+
+* Defining .DEFAULT with no deps or commands clears its commands.
+
+* New default implicit rules for .S (cpp, then as), and .sh (copy and make
+executable).  All default implicit rules that use cpp (even indirectly), use
+$(CPPFLAGS).
+
+Version 3.29
+
+* Giving the -j option with no arguments gives you infinite jobs.
+
+Version 3.28
+
+* New option: "-l LOAD" says not to start any new jobs while others are
+running if the load average is not below LOAD (a floating-point number).
+
+* There is support in place for implementations of remote command execution
+in Make.  See the file remote.c.
+
+Version 3.26
+
+* No more than 10 directories will be kept open at once.
+(This number can be changed by redefining MAX_OPEN_DIRECTORIES in dir.c.)
+
+Version 3.25
+
+* Archive files will have their modification times recorded before doing
+anything that might change their modification times by updating an archive
+member.
+
+Version 3.20
+
+* The `MAKELEVEL' variable is defined for use by makefiles.
+
+Version 3.19
+
+* The recursion level indications in error messages are much shorter than
+they were in version 3.14.
+
+Version 3.18
+
+* Leading spaces before directives are ignored (as documented).
+
+* Included makefiles can determine the default goal target.
+(System V Make does it this way, so we are being compatible).
+
+Version 3.14.
+
+* Variables that are defaults built into Make will not be put in the
+environment for children.  This just saves some environment space and,
+except under -e, will be transparent to sub-makes.
+
+* Error messages from sub-makes will indicate the level of recursion.
+
+* Hopefully some speed-up for large directories due to a change in the
+directory hashing scheme.
+
+* One child will always get a standard input that is usable.
+
+* Default makefiles that don't exist will be remade and read in.
+
+Version 3.13.
+
+* Count parentheses inside expansion function calls so you can
+have nested calls: `$(sort $(foreach x,a b,$(x)))'.
+
+Version 3.12.
+
+* Several bug fixes, including USG and Sun386i support.
+
+* `shell' function to expand shell commands a la `
+
+* If the `-d' flag is given, version information will be printed.
+
+* The `-c' option has been renamed to `-C' for compatibility with tar.
+
+* The `-p' option no longer inhibits other normal operation.
+
+* Makefiles will be updated and re-read if necessary.
+
+* Can now run several commands at once (parallelism), -j option.
+
+* Error messages will contain the level of Make recursion, if any.
+
+* The `MAKEFLAGS' and `MFLAGS' variables will be scanned for options after
+makefiles are read.
+
+* A double-colon rule with no dependencies will always have its commands run.
+(This is how both the BSD and System V versions of Make do it.)
+
+Version 3.05
+
+(Changes from versions 1 through 3.05 were never recorded.  Sorry.)
+
+----------------------------------------------------------------------
+Copyright information:
+
+   Permission is granted to anyone to make or distribute verbatim copies
+   of this document as received, in any medium, provided that the
+   copyright notice and this permission notice are preserved, thus
+   giving the recipient permission to redistribute in turn.
+
+   Permission is granted to distribute modified versions of this
+   document, or of portions of it, under the above conditions, provided
+   also that they carry prominent notices stating who last changed them.

NMakefile.template

@@ -0,0 +1,123 @@
+# NOTE: If you have no `make' program at all to process this makefile, run
+# `build_w32.bat' instead.
+#
+# Copyright (C) 1988,89,91,92,93,94,95,96,97 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Make; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+#
+#       NMakefile for GNU Make
+#
+
+LINK = link
+CC = cl
+
+OUTDIR=.
+MAKEFILE=NMakefile
+SUBPROC_MAKEFILE=NMakefile
+
+CFLAGS_any = /nologo /MT /W3 /GX /Zi /YX /I . /I glob /I w32/include /D WIN32 /D WINDOWS32 /D _CONSOLE /D HAVE_CONFIG_H
+CFLAGS_debug = $(CFLAGS_any) /Od /D DEBUG /D _DEBUG /FR.\WinDebug/ /Fp.\WinDebug/make.pch /Fo.\WinDebug/ /Fd.\WinDebug/make.pdb
+CFLAGS_release = $(CFLAGS_any) /O2 /D NDEBUG /FR.\WinRel/ /Fp.\WinRel/make.pch /Fo.\WinRel/
+
+LDFLAGS_debug = w32\subproc\WinDebug\subproc.lib /NOLOGO /SUBSYSTEM:console\
+	/INCREMENTAL:no /PDB:WinDebug/make.pdb /MACHINE:I386 \
+	/OUT:WinDebug/make.exe /DEBUG
+LDFLAGS_release = w32\subproc\WinRel\subproc.lib /NOLOGO /SUBSYSTEM:console\
+	/INCREMENTAL:no /MACHINE:I386 /OUT:WinRel/make.exe
+
+all: config.h subproc Release Debug
+
+#
+# Make sure we build the subproc library first. It has it's own
+# makefile. To be portable to Windows 95, we put the instructions
+# on how to build the library into a batch file. On NT, we could
+# simply have done foo && bar && dog, but this doesn't port.
+#
+subproc: w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib
+
+w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib: w32/subproc/misc.c w32/subproc/sub_proc.c w32/subproc/w32err.c
+	subproc.bat $(SUBPROC_MAKEFILE) $(MAKE)
+	if exist WinDebug\make.exe erase WinDebug\make.exe
+	if exist WinRel\make.exe erase WinRel\make.exe
+
+config.h: config.h.W32
+	copy $? $@
+
+Release:
+	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_release)" CFLAGS="$(CFLAGS_release)" OUTDIR=WinRel WinRel/make.exe
+Debug:
+	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_debug)" CFLAGS="$(CFLAGS_debug)" OUTDIR=WinDebug WinDebug/make.exe
+
+clean:
+	if exist WinDebug\nul rmdir /s /q WinDebug
+	if exist WinRel\nul rmdir /s /q WinRel
+	if exist w32\subproc\WinDebug\nul rmdir /s /q w32\subproc\WinDebug
+	if exist w32\subproc\WinRel\nul rmdir /s /q w32\subproc\WinRel
+	if exist config.h erase config.h
+	erase *.pdb
+
+$(OUTDIR):
+	if not exist .\$@\nul mkdir .\$@
+
+LIBS = kernel32.lib user32.lib advapi32.lib
+
+OBJS = \
+	$(OUTDIR)/ar.obj \
+	$(OUTDIR)/arscan.obj \
+	$(OUTDIR)/commands.obj \
+	$(OUTDIR)/default.obj \
+	$(OUTDIR)/dir.obj \
+	$(OUTDIR)/expand.obj \
+	$(OUTDIR)/file.obj \
+	$(OUTDIR)/function.obj \
+	$(OUTDIR)/getloadavg.obj \
+	$(OUTDIR)/getopt.obj \
+	$(OUTDIR)/getopt1.obj \
+	$(OUTDIR)/implicit.obj \
+	$(OUTDIR)/job.obj \
+	$(OUTDIR)/main.obj \
+	$(OUTDIR)/misc.obj \
+	$(OUTDIR)/read.obj \
+	$(OUTDIR)/remake.obj \
+	$(OUTDIR)/remote-stub.obj \
+	$(OUTDIR)/rule.obj \
+	$(OUTDIR)/signame.obj \
+	$(OUTDIR)/variable.obj \
+	$(OUTDIR)/version.obj \
+	$(OUTDIR)/vpath.obj \
+	$(OUTDIR)/glob.obj \
+	$(OUTDIR)/fnmatch.obj \
+	$(OUTDIR)/dirent.obj \
+	$(OUTDIR)/pathstuff.obj
+
+$(OUTDIR)/make.exe: $(OUTDIR) $(OBJS)
+	$(LINK) @<<
+		$(LDFLAGS) $(LIBS) $(OBJS)
+<<
+
+.c{$(OUTDIR)}.obj:
+	$(CC) $(CFLAGS) /c $<
+
+$(OUTDIR)/glob.obj : glob/glob.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/fnmatch.obj : glob/fnmatch.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/dirent.obj : w32/compat/dirent.c
+	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/pathstuff.obj : w32/pathstuff.c
+	$(CC) $(CFLAGS) /c $?

README.Amiga

@@ -0,0 +1,61 @@
+Short: Port of GNU make with SAS/C (no ixemul.library required)
+Author: GNU, Amiga port by Aaron "Optimizer" Digulla
+Uploader: Aaron "Optimizer" Digulla (digulla@fh-konstanz.de)
+Type: dev/c
+
+This is a pure Amiga port of GNU make. It needs no extra libraries or
+anything. It has the following features (in addition to any features of
+GNU make):
+
+- Runs Amiga-Commands with SystemTags() (Execute)
+- Can run multi-line statements
+- Allows to use Device-Names in targets:
+
+	c:make : make.o
+
+    is ok. To distinguish between device-names and target : or ::, MAKE
+    looks for spaces. If there are any around :, it's taken as a target
+    delimiter, if there are none, it's taken as the name of a device. Note
+    that "make:make.o" tries to create "make.o" on the device "make:".
+- Replaces @@ by a newline in any command line:
+
+	if exists make @@\
+	    delete make.bak quiet @@\
+	    rename make make.bak @@\
+	endif @@\
+	$(CC) Link Make.o To make
+
+    works. Note that the @@ must stand alone (ie. "make@@\" is illegal).
+    Also be carefull that there is a space after the "\" (ie, at the
+    beginning of the next line).
+- Can be made resident to save space and time
+- Amiga specific wildcards can be used in $(wildcard ...)
+
+BUGS:
+- The line
+
+    dummy.h : src/*.c
+
+tries to make dummy.h from "src/*.c" (ie. no wildcard-expansion takes
+place). You have to use "$(wildcard src/*.c)" instead.
+
+COMPILING FROM SCRATCH
+----------------------
+
+To recompile, you need SAS/C 6.51. make itself is not neccessary, there
+is an smakefile.
+
+1. Copy config.ami to config.h
+2. If you use make to compie, copy Makefile.ami to Makefile and
+    glob/Makefile.ami to glob/Makefile. Copy make into the current
+    directory.
+
+3. Run smake/make
+
+INSTALLATION
+
+Copy make somewhere in your search path (eg. sc:c or sc:bin).
+If you plan to use recursive makes, install make resident:
+
+    Resident make Add
+

README.DOS.template

@@ -0,0 +1,303 @@
+Port of GNU Make to 32-bit protected mode on MSDOS and MS-Windows.
+
+Builds with DJGPP v2 port of GNU C/C++ compiler and utilities.
+
+
+New (since 3.74) DOS-specific features:
+
+   1. Supports long filenames when run from DOS box on Windows 9x.
+
+   2. Supports both stock DOS COMMAND.COM and Unix-style shells
+      (details in ``Notes'' below).
+
+   3. Supports DOS drive letters in dependencies and pattern rules.
+
+   4. Better support for DOS-style backslashes in pathnames (but see
+      ``Notes'' below).
+
+   5. The $(shell) built-in can run arbitrary complex commands,
+      including pipes and redirection, even when COMMAND.COM is your
+      shell.
+
+   6. Can be built without floating-point code (see below).
+
+   7. Supports signals in child programs and restores the original
+      directory if the child was interrupted.
+
+   8. Can be built without (a previous version of) Make.
+
+   9. The build process requires only standard tools.  (Optional
+      targets like "install:" and "clean:" still need additional
+      programs, though, see below.)
+
+  10. Beginning with v3.78, the test suite works in the DJGPP
+      environment (requires Perl and auxiliary tools; see below).
+
+
+To build:
+
+   1. Unzip the archive, preserving the directory structure (-d switch
+      if you use PKUNZIP).  If you build Make on Windows 95, use an
+      unzip program that supports long filenames in zip files.
+
+      If you are unpacking an official GNU source distribution, use
+      either DJTAR (which is part of the DJGPP development
+      environment), or the DJGPP port of GNU Tar.
+
+   2. Invoke the `configure.bat' batch file.
+
+      If you are building Make in-place, i.e. in the same directory
+      where its sources are kept, just type "configure.bat" and press
+      [Enter].  Otherwise, you need to supply the path to the source
+      directory as an argument to the batch file, like this:
+
+	c:\djgpp\gnu\make-%VERSION%\configure.bat c:/djgpp/gnu/make-%VERSION%
+
+      Note the forward slashes in the source path argument: you MUST
+      use them here.
+
+   3. If configure.bat doesn't find a working Make, it will suggest to
+      use the `dosbuild.bat' batch file to build Make.  Either do as it
+      suggests or install another Make program (a pre-compiled binary
+      should be available from the usual DJGPP sites) and rerun
+      configure.bat.
+
+   4. If you will need to run Make on machines without an FPU, you
+      might consider building a version of Make which doesn't issue
+      floating-point instructions (they don't help much on MSDOS
+      anyway).  To this end, edit the Makefile created by
+      configure.bat and add -DNO_FLOAT to the value of CPPFLAGS.
+
+   5. Invoke Make.
+
+      If you are building from outside of the source directory, you
+      need to tell Make where the sources are, like this:
+
+	        make srcdir=c:/djgpp/gnu/make-%VERSION%
+
+      (configure.bat will tell you this when it finishes).  You MUST
+      use a full, not relative, name of the source directory here, or
+      else Make might fail.
+
+   6. After Make finishes, if you have a Unix-style shell installed,
+      you can use the `install' target to install the package.  You
+      will also need GNU Fileutils and GNU Sed for this (they should
+      be available from the DJGPP sites).
+
+      Without a Unix-style shell, you will have to install programs
+      and the docs manually.  Copy make.exe to a directory on your
+      PATH, make.i* info files to your Info directory, and update the
+      file `dir' in your Info directory by adding the following item
+      to the main menu:
+
+	* Make: (make.info).           The GNU make utility.
+
+      If you have the `install-info' program (from the GNU Texinfo
+      package), it will do that for you if you invoke it like this:
+
+	install-info --info-dir=c:/djgpp/info c:/djgpp/info/make.info
+
+      (If your Info directory is other than C:\DJGPP\INFO, change this
+      command accordingly.)
+
+   7. The `clean' targets also require Unix-style shell, and GNU Sed
+      and `rm' programs (the latter from Fileutils).
+
+   8. To run the test suite, type "make check".  This requires a Unix
+      shell (I used the DJGPP port of Bash 2.03), Perl, Sed, Fileutils
+      and Sh-utils.
+
+
+Notes:
+-----
+
+   1. The shell issue.
+
+      This is probably the most significant improvement, first
+      introduced in the port of GNU Make 3.75.
+
+      The original behavior of GNU Make is to invoke commands
+      directly, as long as they don't include characters special to
+      the shell or internal shell commands, because that is faster.
+      When shell features like redirection or filename wildcards are
+      involved, Make calls the shell.
+
+      This port supports both DOS shells (the stock COMMAND.COM and its
+      4DOS/NDOS replacements), and Unix-style shells (tested with the
+      venerable Stewartson's `ms_sh' 2.3 and the DJGPP port of `bash' by
+      Daisuke Aoyama <jack@st.rim.or.jp>).
+
+      When the $SHELL variable points to a Unix-style shell, Make
+      works just like you'd expect on Unix, calling the shell for any
+      command that involves characters special to the shell or
+      internal shell commands.  The only difference is that, since
+      there is no standard way to pass command lines longer than the
+      infamous DOS 126-character limit, this port of Make writes the
+      command line to a temporary disk file and then invokes the shell
+      on that file.
+
+      If $SHELL points to a DOS-style shell, however, Make will not
+      call it automatically, as it does with Unix shells.  Stock
+      COMMAND.COM is too dumb and would unnecessarily limit the
+      functionality of Make.  For example, you would not be able to
+      use long command lines in commands that use redirection or
+      pipes.  Therefore, when presented with a DOS shell, this port of
+      Make will emulate most of the shell functionality, like
+      redirection and pipes, and shall only call the shell when a
+      batch file or a command internal to the shell is invoked.  (Even
+      when a command is an internal shell command, Make will first
+      search the $PATH for it, so that if a Makefile calls `mkdir',
+      you can install, say, a port of GNU `mkdir' and have it called
+      in that case.)
+
+      The key to all this is the extended functionality of `spawn' and
+      `system' functions from the DJGPP library; this port just calls
+      `system' where it would invoke the shell on Unix.  The most
+      important aspect of these functions is that they use a special
+      mechanism to pass long (up to 16KB) command lines to DJGPP
+      programs.  In addition, `system' emulates some internal
+      commands, like `cd' (so that you can now use forward slashes
+      with it, and can also change the drive if the directory is on
+      another drive).  Another aspect worth mentioning is that you can
+      call Unix shell scripts directly, provided that the shell whose
+      name is mentioned on the first line of the script is installed
+      anywhere along the $PATH.  It is impossible to tell here
+      everything about these functions; refer to the DJGPP library
+      reference for more details.
+
+      The $(shell) built-in is implemented in this port by calling
+      `popen'.  Since `popen' calls `system', the above considerations
+      are valid for $(shell) as well.  In particular, you can put
+      arbitrary complex commands, including pipes and redirection,
+      inside $(shell), which is in many cases a valid substitute for
+      the Unix-style command substitution (`command`) feature.
+
+
+   2. "SHELL=/bin/sh" -- or is it?
+
+      Many Unix Makefiles include a line which sets the SHELL, for
+      those versions of Make which don't have this as the default.
+      Since many DOS systems don't have `sh' installed (in fact, most
+      of them don't even have a `/bin' directory), this port takes
+      such directives with a grain of salt.  It will only honor such a
+      directive if the basename of the shell name (like `sh' in the
+      above example) can indeed be found in the directory that is
+      mentioned in the SHELL= line (`/bin' in the above example), or
+      in the current working directory, or anywhere on the $PATH (in
+      that order).  If the basename doesn't include a filename
+      extension, Make will look for any known extension that indicates
+      an executable file (.exe, .com, .bat, .btm, .sh, and even .sed
+      and .pl).  If any such file is found, then $SHELL will be
+      defined to the exact pathname of that file, and that shell will
+      hence be used for the rest of processing.  But if the named
+      shell is *not* found, the line which sets it will be effectively
+      ignored, leaving the value of $SHELL as it was before.  Since a
+      lot of decisions that this port makes depend on the gender of
+      the shell, I feel it doesn't make any sense to tailor Make's
+      behavior to a shell which is nowhere to be found.
+
+      Note that the above special handling of "SHELL=" only happens
+      for Makefiles; if you set $SHELL in the environment or on the
+      Make command line, you are expected to give the complete
+      pathname of the shell, including the filename extension.
+
+      The default value of $SHELL is computed as on Unix (see the Make
+      manual for details), except that if $SHELL is not defined in the
+      environment, $COMSPEC is used.  Also, if an environment variable
+      named $MAKESHELL is defined, it takes precedence over both
+      $COMSPEC and $SHELL.  Note that, unlike Unix, $SHELL in the
+      environment *is* used to set the shell (since on MSDOS, it's
+      unlikely that the interactive shell will not be suitable for
+      Makefile processing).
+
+      The bottom line is that you can now write Makefiles where some
+      of the targets require a real (i.e. Unix-like) shell, which will
+      nevertheless work when such shell is not available (provided, of
+      course, that the commands which should always work, don't
+      require such a shell).  More important, you can convert Unix
+      Makefiles to MSDOS and leave the line which sets the shell
+      intact, so that people who do have Unixy shell could use it for
+      targets which aren't converted to DOS (like `install' and
+      `uninstall', for example).
+
+
+   3. Default directories.
+
+      GNU Make knows about standard directories where it searches for
+      library and include files mentioned in the Makefile.  Since
+      MSDOS machines don't have standard places for these, this port
+      will search ${DJDIR}/lib and ${DJDIR}/include respectively.
+      $DJDIR is defined automatically by the DJGPP startup code as the
+      root of the DJGPP installation tree (unless you've tampered with
+      the DJGPP.ENV file).  This should provide reasonable default
+      values, unless you moved parts of DJGPP to other directories.
+
+
+   4. Letter-case in filenames.
+
+      If you run Make on Windows 9x, you should be aware of the
+      letter-case issue.  Make is internally case-sensitive, but all
+      file operations are case-insensitive on Windows 9x, so
+      e.g. files `FAQ', `faq' and `Faq' all refer to the same file, as
+      far as Windows is concerned.  The underlying DJGPP C library
+      functions honor the letter-case of the filenames they get from
+      the OS, except that by default, they down-case 8+3 DOS filenames
+      which are stored in upper case in the directory and would break
+      many Makefiles otherwise.  (The details of which filenames are
+      converted to lower case are explained in the DJGPP libc docs,
+      under the `_preserve_fncase' and `_lfn_gen_short_fname'
+      functions, but as a thumb rule, any filename that is stored in
+      upper case in the directory, is a valid DOS 8+3 filename and
+      doesn't include characters invalid on MSDOS FAT filesystems,
+      will be automatically down-cased.)  User reports that I have
+      indicate that this default behavior is generally what you'd
+      expect; however, your input is most welcome.
+
+      In any case, if you hit a situation where you must force Make to
+      get the 8+3 DOS filenames in upper case, set FNCASE=y in the
+      environment or in the Makefile.
+
+
+   5. DOS-style pathnames.
+
+      There are a lot of places throughout the program sources which
+      make implicit assumptions about the pathname syntax.  In
+      particular, the directories are assumed to be separated by `/',
+      and any pathname which doesn't begin with a `/' is assumed to be
+      relative to the current directory.  This port attempts to
+      support DOS-style pathnames which might include the drive letter
+      and use backslashes instead of forward slashes.  However, this
+      support is not complete; I feel that pursuing this support too
+      far might break some more important features, particularly if
+      you use a Unix-style shell (where a backslash is a quote
+      character).  I only consider support of backslashes desirable
+      because some Makefiles invoke non-DJGPP programs which don't
+      understand forward slashes.  A notable example of such programs
+      is the standard programs which come with MSDOS.  Otherwise, you
+      are advised to stay away from backslashes whenever possible.  In
+      particular, filename globbing won't work on pathnames with
+      backslashes, because the GNU `glob' library doesn't support them
+      (backslash is special in filename wildcards, and I didn't want
+      to break that).
+
+      One feature which *does* work with backslashes is the filename-
+      related built-in functions such as $(dir), $(notdir), etc.
+      Drive letters in pathnames are also fully supported.
+
+
+
+Bug reports:
+-----------
+
+   Bugs that are clearly related to the MSDOS/DJGPP port should be
+   reported first on the comp.os.msdos.djgpp news group (if you cannot
+   post to Usenet groups, write to the DJGPP mailing list,
+   <djgpp@delorie.com>, which is an email gateway into the above news
+   group).  For other bugs, please follow the procedure explained in
+   the "Bugs" chapter of the Info docs.  If you don't have an Info
+   reader, look up that chapter in the `make.i1' file with any text
+   browser/editor.
+
+
+   Enjoy,
+			Eli Zaretskii <eliz@is.elta.co.il>

README.W32.template

@@ -0,0 +1,241 @@
+Port of GNU make to Windows NT and Windows 95
+Builds natively with MSVC 2.x or MSVC 4.x compilers.
+Should also build fine with MSVC 5.x and 6.x (though not confirmed).
+
+This Windows 32-bit port of GNU make is maintained primarily by Rob
+Tulloh, who is also the author of this README.
+
+To build with nmake on Windows NT, Windows 95, or Windows 98:
+
+	1. Make sure cl.exe is in your %Path%. Example:
+
+		set Path=%Path%;c:/msdev/bin
+
+	2. Make sure %include% is set to msvc include directory. Example:
+
+		set include=c:/msdev/include
+
+	3. Make sure %lib% is set to msvc lib directory. Example:
+
+		set lib=c:/msdev/lib
+
+	4. nmake /f NMakefile
+
+
+    A short cut to steps 1, 2, and 3 is to run VCVARS32.bat before
+    invoking namke. For example:
+
+        c:
+        cd \msdev\bin
+        VCVARS32.bat
+	cd \path\to\make-%VERSION%
+	nmake /f NMakefile
+
+There is a bat file (build_w32.bat) for folks who have fear of nmake.
+
+Outputs:
+
+	WinDebug/make.exe
+	WinRel/make.exe
+
+
+-- Notes/Caveats --
+
+GNU make on Windows 32-bit platforms:
+
+	This version of make is ported natively to Windows32 platforms
+	(Windows NT 3.51, Windows NT 4.0, Windows 95, and Windows 98). It
+	does not rely on any 3rd party software or add-on packages for
+	building. The only thing needed is a version of Visual C++,
+	which is the predominant compiler used on Windows32 platforms.
+
+	Do not confuse this port of GNU make with other Windows32 projects
+	which provide a GNU make binary. These are separate projects
+	and are not connected to this port effort.
+
+GNU make and sh.exe:
+
+	This port prefers you have a working sh.exe somewhere on your
+	system. If you don't have sh.exe, the port falls back to
+	MSDOS mode for launching programs (via a batch file).
+	The MSDOS mode style execution has not been tested that
+	carefully though (The author uses GNU bash as sh.exe).
+
+	There are very few true ports of Bourne shell for NT right now.
+	There is a version of GNU bash available from Cygnus "Cygwin"
+	porting effort (http://sourceware.cygnus.com/cygwin).
+	Other possibilities are the MKS version of sh.exe, or building
+        your own with a package like NutCracker (DataFocus) or Portage
+        (Consensys).
+
+GNU make and brain-dead shells (BATCH_MODE_ONLY_SHELL):
+
+	Some versions of Bourne shell does not behave well when invoked
+	as 'sh -c' from CreateProcess().  The main problem is they seem
+	to have a hard time handling quoted strings correctly. This can
+	be circumvented by writing commands to be executed to a batch
+	file and then executing the command by calling 'sh file'.
+
+	To work around this difficulty, this version of make supports
+	a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
+	time, make forces all command lines to be executed via script
+	files instead of by command line.
+
+	A native Windows32 system with no Bourne shell will also run
+	in batch mode.  All command lines will be put into batch files
+	and executed via $(COMSPEC) (%COMSPEC%).
+
+GNU make and Cygnus GNU Windows32 tools:
+
+	Good news! Make now has native support for Cygwin sh. To enable,
+	define the HAVE_CYGWIN_SHELL in config.h and rebuild make
+	from scratch. This version of make tested with B20.1 of Cygwin.
+	Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.
+
+GNU make and the MKS shell:
+
+	There is now semi-official support for the MKS shell. To turn this
+	support on, define HAVE_MKS_SHELL in the config.h.W32 before you
+	build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
+	on HAVE_MKS_SHELL.
+
+GNU make handling of drive letters in pathnames (PATH, vpath, VPATH):
+
+	There is a caveat that should be noted with respect to handling
+	single character pathnames on Windows systems.	When colon is
+	used in PATH variables, make tries to be smart about knowing when
+	you are using colon as a separator versus colon as a drive
+	letter.	 Unfortunately, something as simple as the string 'x:/'
+	could be interpreted 2 ways: (x and /) or (x:/).
+
+	Make chooses to interpret a letter plus colon (e.g. x:/) as a
+	drive letter pathname.	If it is necessary to use single
+	character directories in paths (VPATH, vpath, Path, PATH), the
+	user must do one of two things:
+
+	 a. Use semicolon as the separator to disambiguate colon. For
+	    example use 'x;/' if you want to say 'x' and '/' are
+	    separate components.
+
+	 b. Qualify the directory name so that there is more than
+	    one character in the path(s) used. For example, none
+	    of these settings are ambiguous:
+
+	      ./x:./y
+	      /some/path/x:/some/path/y
+	      x:/some/path/x:x:/some/path/y
+
+	Please note that you are free to mix colon and semi-colon in the
+	specification of paths.	 Make is able to figure out the intended
+	result and convert the paths internally to the format needed
+	when interacting with the operating system.
+
+	You are encouraged to use colon as the separator character.
+	This should ease the pain of deciding how to handle various path
+	problems which exist between platforms.	 If colon is used on
+	both Unix and Windows systems, then no ifdef'ing will be
+	necessary in the makefile source.
+
+GNU make test suite:
+
+	I verified all functionality with a slightly modified version
+	of make-test-%VERSION% (modifications to get test suite to run
+	on Windows NT). All tests pass in an environment that includes
+	sh.exe.  Tests were performed on both Windows NT and Windows 95.
+
+Building GNU make on Windows NT and Windows 95/98 with Microsoft Visual C:
+
+	I did not provide a Visual C project file with this port as
+	the project file would not be considered freely distributable
+	(or so I think). It is easy enough to create one, though, if
+	you know how to use Visual C.
+
+	I build the program statically to avoid problems locating DLL's
+	on machines that may not have MSVC runtime installed. If you
+	prefer, you can change make to build with shared libraries by
+	changing /MT to /MD in the NMakefile (or in build_w32.bat).
+
+	The program has not been built for non-Intel architectures (yet).
+
+	I have not tried to build with any other compilers than MSVC. I
+	have heard that this is possible though so don't be afraid to
+	notify me of your successes!
+
+Pathnames and white space:
+
+	Unlike Unix, Windows 95/NT systems encourage pathnames which
+	contain white space (e.g. C:\Program Files\). These sorts of pathnames
+	are legal under Unix too, but are never encouraged. There is
+	at least one place in make (VPATH/vpath handling) where paths
+	containing white space will simply not work. There may be others
+	too. I chose to not try and port make in such a way so that
+	these sorts of paths could be handled. I offer these suggestions
+	as workarounds:
+
+		1. Use 8.3 notation
+		2. Rename the directory so it does not contain white space.
+
+	If you are unhappy with this choice, this is free software
+	and you are free to take a crack at making this work. The code
+	in w32/pathstuff.c and vpath.c would be the places to start.
+
+Pathnames and Case insensitivity:
+
+	Unlike Unix, Windows 95/NT systems are case insensitive but case
+	preserving.  For example if you tell the file system to create a
+	file named "Target", it will preserve the case.  Subsequent access to
+	the file with other case permutations will succeed (i.e. opening a
+	file named "target" or "TARGET" will open the file "Target").
+
+	By default, GNU make retains its case sensitivity when comparing
+	target names and existing files or directories.  It can be
+	configured, however, into a case preserving and case insensitive
+	mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
+	config.h.W32.
+
+	For example, the following makefile will create a file named
+	Target in the directory subdir which will subsequently be used
+	to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
+	Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
+	will not be made:
+
+	subdir/Target:
+		touch $@
+
+	SUBDIR/DepTarget: SubDir/TARGET
+		cp $^ $@
+
+	Reliance on this behavior also eliminates the ability of GNU make
+	to use case in comparison of matching rules.  For example, it is
+	not possible to set up a C++ rule using %.C that is different
+	than a C rule using %.c.  GNU make will consider these to be the
+	same rule and will issue a warning.
+
+SAMBA/NTFS/VFAT:
+
+	I have not had any success building the debug version of this
+	package using SAMBA as my file server. The reason seems to be
+	related to the way VC++ 4.0 changes the case name of the pdb
+	filename it is passed on the command line. It seems to change
+	the name always to to lower case. I contend that
+	the VC++ compiler should not change the casename of files that
+	are passed as arguments on the command line. I don't think this
+	was a problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.
+
+	The package builds fine on VFAT and NTFS filesystems.
+
+	Most all of the development I have done to date has been using
+	NTFS and long file names. I have not done any considerable work
+	under VFAT. VFAT users may wish to be aware that this port
+	of make does respect case sensitivity.
+
+FAT:
+
+	Version 3.76 added support for FAT filesystems. Make
+	works around some difficulties with stat'ing of
+	files and caching of filenames and directories internally.
+
+Bug reports:
+
+	Please submit bugs via the normal bug reporting mechanism which
+	is described in the GNU make manual and the base README.

README.customs

@@ -0,0 +1,73 @@
+                                                            -*-indented-text-*-
+
+GNU make can utilize the Customs library, distributed with Pmake, to
+provide builds distributed across multiple hosts.
+
+In order to utilize this capability, you must first download and build
+the Customs library.  It is contained in the Pmake distribution, which
+can be obtained at:
+
+  ftp://ftp.icsi.berkeley.edu/pub/ai/stolcke/software/
+
+This integration was tested (superficially) with Pmake 2.1.33.
+
+
+BUILDING CUSTOMS
+----------------
+
+First, build pmake and Customs.  You need to build pmake first, because
+Customs require pmake to build.  Unfortunately, this is not trivial;
+please see the pmake and Customs documentation for details.  The best
+place to look for instructions is in the pmake-2.1.33/INSTALL file.
+
+Note that the 2.1.33 Pmake distribution comes with a set of patches to
+GNU make, distributed in the pmake-2.1.33/etc/gnumake/ directory.  These
+patches are based on GNU make 3.75 (there are patches for earlier
+versions of GNU make, also).  The parts of this patchfile which relate
+directly to Customs support have already been incorporated into this
+version of GNU make, so you should _NOT_ apply the patch file.
+
+However, there are a few non-Customs specific (as far as I could tell)
+changes here which are not incorporated (for example, the modification
+to try expanding -lfoo to libfoo.so).  If you rely on these changes
+you'll need to re-apply them by hand.
+
+Install the Customs library and header files according to the
+documentation.  You should also install the man pages (contrary to
+comments in the documentation, they weren't installed automatically for
+me; I had to cd to the ``pmake-2.1.33/doc'' directory and run ``pmake
+install'' there directly).
+
+
+BUILDING GNU MAKE
+-----------------
+
+Once you've installed Customs, you can build GNU make to use it.  When
+configuring GNU make, merely use the ``--with-customs=DIR'' option.
+Provide the directory containing the ``lib'' and ``include/customs''
+subdirectories as DIR.  For example, if you installed the customs
+library in /usr/local/lib and the headers in /usr/local/include/customs,
+then you'd pass ``--with-customs=/usr/local'' as an option to configure.
+
+Run make (or use build.sh) normally to build GNU make as described in
+the INSTALL file.
+
+See the documentation for Customs for information on starting and
+configuring Customs.
+
+
+PROBLEMS
+--------
+
+SunOS 4.1.x:
+  The customs/sprite.h header file #includes the <malloc.h> header
+  files; this conflicts with GNU make's configuration so you'll get a
+  compile error if you use GCC (or any other ANSI-capable C compiler).
+
+  I commented out the #include in sprite.h:107:
+
+    #if defined(sun) || defined(ultrix) || defined(hpux) || defined(sgi)
+    /* #include <malloc.h> */
+    #else
+
+  YMMV.

README.template

@@ -1,14 +1,68 @@
-This directory contains the VERSION test release of GNU Make.
-All bugs reported for previous test releases have been fixed.
-Some bugs surely remain.
+This directory contains the %VERSION% release of GNU Make.
+
+See the file NEWS for the user-visible changes from previous releases.
+In addition, there have been bugs fixed.
+
+Please check the system-specific notes below for any caveats related to
+your operating system.
 
 For general building and installation instructions, see the file INSTALL.
+
 If you need to build GNU Make and have no other `make' program to use,
 you can use the shell script `build.sh' instead.  To do this, first run
 `configure' as described in INSTALL.  Then, instead of typing `make' to
 build the program, type `sh build.sh'.  This should compile the program
 in the current directory.  Then you will have a Make program that you can
-use for `make install', or whatever else.
+use for `./make install', or whatever else.
+
+Some systems' Make programs are broken and cannot process the Makefile for
+GNU Make.  If you get errors from your system's Make when building GNU
+Make, try using `build.sh' instead.
+
+GNU make is fully documented in the GNU Make manual, which is contained
+in this distribution as the file make.texinfo.  You can also find
+on-line and preformatted (PostScript and DVI) versions at the FSF's web
+site.  There is information there about ordering hardcopy documentation.
+
+  http://www.gnu.org/
+  http://www.gnu.org/doc/doc.html
+  http://www.gnu.org/manual/manual.html
+
+You can also find the latest versions of GNU Make from there.
+
+You can send GNU make bug reports to bug-make@gnu.org.  Please see the
+section of the GNU make manual entitled `Problems and Bugs' for
+information on submitting useful and complete bug reports.
+
+If you need help using GNU make, try these forums:
+
+  help-make@gnu.org
+  help-utils@gnu.org
+  news:gnu.utils.help
+  news:gnu.utils.bug
+
+Also:
+
+  - See README.customs for details on integrating GNU make with the
+    Customs distributed build environment from the Pmake distribution.
+
+  - See README.W32 for details about GNU Make on Windows NT, 95, or 98.
+
+  - See README.Amiga for details about GNU Make on AmigaDOS.
+
+  - See README.DOS for compilation instructions on MS-DOS and MS-Windows
+    using DJGPP tools.
+
+    A precompiled binary of the MSDOS port of GNU Make is available as part
+    of DJGPP; see the WWW page http://www.delorie.com/djgpp/ for more
+    information.
+
+
+GNU Make is free software.  See the file COPYING for copying conditions.
+
+
+System-specific Notes
+---------------------
 
 It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such
 that if you compile make with `cc -O' on AIX 3.2, it will not work correctly.
@@ -20,9 +74,8 @@ debug this code, you can do `make check-loadavg' to see if it works
 properly on your system.  (You must run `configure' beforehand, but you
 need not build Make itself to run this test.)
 
-See the file NEWS for what has changed since previous releases.
-
-GNU Make is fully documented in make.texinfo.  See the section entitled
-`Problems and Bugs' for information on submitting bug reports.
-
-GNU Make is free software.  See the file COPYING for copying conditions.
+Another potential source of porting problems is the support for large
+files (LFS) in configure for those operating systems that provide it.
+Please report any bugs that you find in this area.  If you run into
+difficulties, then as a workaround you should be able to disable LFS by
+adding the `--disable-largefile' option to the `configure' script.

SCOPTIONS

@@ -0,0 +1,13 @@
+ERRORREXX
+OPTIMIZE
+NOVERSION
+OPTIMIZERTIME
+OPTIMIZERALIAS
+DEFINE INCLUDEDIR="include:"
+DEFINE LIBDIR="lib:"
+DEFINE NO_ALLOCA
+DEFINE NO_FLOAT
+DEFINE NO_ARCHIVES
+IGNORE=161
+IGNORE=100
+STARTUP=cres

SMakefile.template

@@ -0,0 +1,213 @@
+# NOTE: If you have no `make' program at all to process this makefile, run
+# `build.sh' instead.
+#
+# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Make; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+#
+#	Makefile for GNU Make
+#
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /make-%VERSION%/
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = /make-%VERSION%/
+
+CC = sc
+RM = delete
+MAKE = smake
+
+CFLAGS =
+CPPFLAGS =
+LDFLAGS =
+
+# Define these for your system as follows:
+#	-DNO_ARCHIVES		To disable `ar' archive support.
+#	-DNO_FLOAT		To avoid using floating-point numbers.
+#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
+#				Some compilers apparently accept this
+#				without complaint but produce losing code,
+#				so beware.
+# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
+# See also `config.h'.
+defines =
+
+# Which flavor of remote job execution support to use.
+# The code is found in `remote-$(REMOTE).c'.
+REMOTE = stub
+
+# If you are using the GNU C library, or have the GNU getopt functions in
+# your C library, you can comment these out.
+GETOPT = getopt.o getopt1.o
+GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
+
+# If you are using the GNU C library, or have the GNU glob functions in
+# your C library, you can comment this out.  GNU make uses special hooks
+# into the glob functions to be more efficient (by using make's directory
+# cache for globbing), so you must use the GNU functions even if your
+# system's C library has the 1003.2 glob functions already.  Also, the glob
+# functions in the AIX and HPUX C libraries are said to be buggy.
+GLOB = Lib glob/glob.lib
+
+# If your system doesn't have alloca, or the one provided is bad, define this.
+ALLOCA = alloca.o
+ALLOCA_SRC = $(srcdir)alloca.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
+# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
+# alloca.c instead on those machines.
+LOADLIBES =
+
+# Any extra object files your system needs.
+extras = amiga.o
+
+# Common prefix for machine-independent installed files.
+prefix =
+# Common prefix for machine-dependent installed files.
+exec_prefix =
+
+# Directory to install `make' in.
+bindir = sc:c
+# Directory to find libraries in for `-lXXX'.
+libdir = lib:
+# Directory to search by default for included makefiles.
+includedir = include:
+# Directory to install the Info files in.
+infodir = doc:
+# Directory to install the man page in.
+mandir = t:
+# Number to put on the man page filename.
+manext = 1
+# Prefix to put on installed `make' binary file name.
+binprefix =
+# Prefix to put on installed `make' man page file name.
+manprefix = $(binprefix)
+
+# Whether or not make needs to be installed setgid.
+# The value should be either `true' or `false'.
+# On many systems, the getloadavg function (used to implement the `-l'
+# switch) will not work unless make is installed setgid kmem.
+install_setgid = false
+# Install make setgid to this group so it can read /dev/kmem.
+group = sys
+
+# Program to install `make'.
+INSTALL_PROGRAM = copy
+# Program to install the man page.
+INSTALL_DATA = copy
+# Generic install program.
+INSTALL = copy
+
+# Program to format Texinfo source into Info files.
+MAKEINFO = makeinfo
+# Program to format Texinfo source into DVI files.
+TEXI2DVI = texi2dvi
+
+# Programs to make tags files.
+ETAGS = etags -w
+CTAGS = ctags -w
+
+objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
+       rule.o implicit.o default.o variable.o expand.o function.o	\
+       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
+       $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
+srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
+       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
+       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
+       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
+       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
+       $(srcdir)vpath.c $(srcdir)version.c                            \
+       $(srcdir)remote-$(REMOTE).c                                     \
+       $(srcdir)ar.c $(srcdir)arscan.c                                \
+       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)            \
+       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h            \
+       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
+       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
+
+
+.SUFFIXES:
+.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
+
+all: make
+info: make.info
+dvi: make.dvi
+# Some makes apparently use .PHONY as the default goal if it is before `all'.
+.PHONY: all check info dvi
+
+make.info: make.texinfo
+	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
+
+make.dvi: make.texinfo
+	$(TEXI2DVI) $(srcdir)make.texinfo
+
+make.ps: make.dvi
+	dvi2ps make.dvi > make.ps
+
+make: $(objs) glob/glob.lib
+	$(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new
+	-delete quiet make
+	rename make.new make
+
+# -I. is needed to find config.h in the build directory.
+.c.o:
+	$(CC) $(defines) IDir "" IDir $(srcdir)glob \
+	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+glob/glob.lib:
+	execute <<
+	    cd glob
+	    smake
+<
+
+tagsrcs = $(srcs) $(srcdir)remote-*.c
+TAGS: $(tagsrcs)
+	$(ETAGS) $(tagsrcs)
+tags: $(tagsrcs)
+	$(CTAGS) $(tagsrcs)
+
+.PHONY: install installdirs
+install:
+	copy make sc:c
+
+loadavg: loadavg.c config.h
+	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
+	      loadavg.c $(LOADLIBES) -o $@
+
+clean: glob-clean
+	-$(RM) -f make loadavg *.o core make.dvi
+
+distclean: clean glob-realclean
+	-$(RM) -f Makefile config.h config.status build.sh
+	-$(RM) -f config.log config.cache
+	-$(RM) -f TAGS tags
+	-$(RM) -f make.?? make.??s make.log make.toc make.*aux
+	-$(RM) -f loadavg.c
+
+realclean: distclean
+	-$(RM) -f make.info*
+
+mostlyclean: clean
+
+.PHONY: glob-clean glob-realclean
+
+glob-clean glob-realclean:
+	execute <<
+	cd glob
+	smake $@
+<

TODO.private

@@ -0,0 +1,119 @@
+                                                            -*-Indented-Text-*-
+GNU Make TODO List
+------------------
+
+This list comes both from the authors and from users of GNU make.
+
+They are listed in no particular order!
+
+Also, I don't gaurantee that all of them will be ultimately deemed "good
+ideas" and implemented.  These are just the ones that, at first blush,
+seem to have some merit (and that I can remember).
+
+However, if you see something here you really, really want, speak up.
+All other things being equal, I will tend to implement things that seem
+to maximize user satisfaction.
+
+If you want to implement some of them yourself, barring the ones I've
+marked below, have at it!  Please contact me first to let me know you're
+working on it, and give me some info about the design--and, critically,
+information about any user-visible syntax change, etc.
+
+
+The Top Item
+------------
+
+If you know perl (or want to learn DejaGNU or similar), the number one
+priority on my list of things I don't have time to do right now is
+fixing up the GNU make test suite.  Most importantly it needs to be made
+"parallelizable", so more than one regression can run at the same time
+(essentially, make the "work" directory local).  Also, the CWD during
+the test should be in the work directory; right now sometimes tests leak
+files into the main directory which causes subsequent tests to fail
+(some tests may need to be tweaked).  Beyond that, any cleanup done to
+make writing, reading, or handling tests simpler would be great!  Please
+feel free to make whatever changes you like to the current tests, given
+some high-level goals, and that you'll port the current tests to
+whatever you do :).
+
+
+The Rest of the List
+--------------------
+
+ 1) Allow variables/functions to expand to other make rules which are
+    then interpreted, with newlines handled correctly.  This is a
+    biggee, and is on my plate.  I already have partially-working code.
+
+ 2) Option to check more than timestamps to determine if targets have
+    changed.  This is also a very big one.  It's _close_ to my plate :),
+    and I have very definite ideas about how I want it done.  Please
+    pick something else unless you must have this feature.  If you try
+    it, please work _extremely_ closely with me on it.
+
+ 2a) Possibly a special case of this is the .KEEP_STATE feature of Sun's
+     make.  Some great folks at W U. in Canada did an implementation of
+     this for a class project.  Their approach is reasonable and
+     workable, but doesn't really fit into my ideas for #2.  Maybe
+     that's OK.  I have paperwork for their work so if you want to do
+     this one talk to me to get what they've already done.
+
+     [K R Praveen <praveen@cair.res.in>]
+
+ 3) Currently you can use "%.foo %.bar : %.baz" to mean that one
+    invocation of the rule builds both targets.  GNU make needs a way to
+    do that for explicit rules, too.  I heard a rumor that some versions
+    of make all you to say "a.foo + a.bar : a.baz" to do this (i.e., a
+    "+" means one invocation builds both).  Don't know if this is the
+    best syntax or not... what if you say "a.foo + a.bar a.bam : a.baz";
+    what does that mean?
+
+ 4) Multi-token pattern rule matching (allow %1/%2.c : %1/obj/%2.o,
+    etc., or something like that).  I have an implementation of this
+    already, it just needs some refinement... maybe.  Additionally I
+    think it only works for static pattern rules; it might need to be
+    fixed up to work with normal pattern rules, too.
+
+ 5) More robust clock skew detection algorithm: less false hits.  I have
+    some notes on this from various discussions.
+
+ 6) Provide MAKETARGETS and MAKEVARIABLES variables, containing the
+    names of the targets and variables defined in the makefile.
+
+    Actually, I now think a $(targets ...) function, at least, would be
+    better than a MAKETARGETS variable.  The argument would be types of
+    targets to list: "phony" is the most useful one.  I suppose
+    "default" might also be useful.  Maybe some others; check the
+    bitfields to see what might be handy.  This one is pretty easy.
+
+ 7) Some sort of operating-system independent way of handling paths
+    would be outstanding, so makefiles can be written for UNIX, VMS,
+    DOS, MS-Windows, Amiga, etc. with a minimum of specialization.
+
+    Or, perhaps related/instead of, some sort of meta-quoting syntax so
+    make can deal with filenames containing spaces, colons, etc.  I
+    dunno, maybe something like $[...]?  This may well not be worth
+    doing until #1 is done.
+
+ 9) Right now the .PRECIOUS, .INTERMEDIATE, and .SECONDARY
+    psuedo-targets have different capabilities.  For example, .PRECIOUS
+    can take a "%", the others can't.  Etc.  These should all work the
+    same, insofar as that makes sense.
+
+10) A syntax that specifies a build order _without_ implying a
+    dependency relationship.  That is, a way to say "A must be built
+    before B" that doesn't force B to be built when A changes.  This is
+    very important for parallel builds: sometimes you need some stuff
+    done first but you don't want to rebuild everything because of it.
+
+11) Improved debugging/logging/etc. capabilities.  This area is in
+    desparate need of work; the current -d, -s, etc. options are simply
+    insufficient.  We need different levels of output: some that are
+    much less verbose.  E.g., maybe just print one line about why make
+    decides to rebuild each target.  Also, we could use something like
+    the -E option for preprocessors; this would print out makefiles
+    after resolving all includes, immediate variable reverences, etc.
+    Also, a way to turn on and off obeying the "@" token for scripts
+    that's independent of -n (so we could have them in effect for -n,
+    and have them not in effect without -n).
+
+    Maybe other things.  Contact me about the user interface.

acconfig.h

@@ -1,11 +1,42 @@
+/* Name of this package (needed by automake) */
+#undef PACKAGE
+
+/* Version of this package (needed by automake) */
+#undef VERSION
+
 /* Define to the name of the SCCS `get' command.  */
 #undef SCCS_GET
 
 /* Define this if the SCCS `get' command understands the `-G<file>' option.  */
 #undef SCCS_GET_MINUS_G
 
+/* Define this to enable job server support in GNU make.  */
+#undef MAKE_JOBSERVER
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+#undef ST_MTIM_NSEC
+
 /* Define this if the C library defines the variable `sys_siglist'.  */
 #undef HAVE_SYS_SIGLIST
 
 /* Define this if the C library defines the variable `_sys_siglist'.  */
 #undef HAVE__SYS_SIGLIST
+
+/* Define this if you have the `union wait' type in <sys/wait.h>.  */
+#undef HAVE_UNION_WAIT
+
+/* Define to `unsigned long' or `unsigned long long'
+   if <inttypes.h> doesn't define.  */
+#undef uintmax_t
+
+/* These are for AC_FUNC_SELECT */
+
+/* Define if the system doesn't provide fd_set.  */
+#undef fd_set
+
+/* Define the type of the first arg to select().  */
+#undef fd_set_size_t
+
+/* Define this if select() args need to be cast away from fd_set (HP-UX).  */
+#undef SELECT_FD_SET_CAST

acinclude.m4

@@ -0,0 +1,480 @@
+dnl acinclude.m4 -- Extra macros needed for GNU make.
+dnl
+dnl Automake will incorporate this into its generated aclocal.m4.
+
+dnl ---------------------------------------------------------------------------
+dnl Got this from the lynx 2.8 distribution.
+dnl by T.E.Dickey <dickey@clark.net>
+dnl and Jim Spath <jspath@mail.bcpl.lib.md.us>
+dnl and Philippe De Muyter <phdm@macqel.be>
+dnl
+dnl Created: 1997/1/28
+dnl Updated: 1997/12/23
+dnl ---------------------------------------------------------------------------
+dnl After checking for functions in the default $LIBS, make a further check
+dnl for the functions that are netlib-related (these aren't always in the
+dnl libc, etc., and have to be handled specially because there are conflicting
+dnl and broken implementations.
+dnl Common library requirements (in order):
+dnl	-lresolv -lsocket -lnsl
+dnl	-lnsl -lsocket
+dnl	-lsocket
+dnl	-lbsd
+AC_DEFUN([CF_NETLIBS],[
+cf_test_netlibs=no
+AC_MSG_CHECKING(for network libraries)
+AC_CACHE_VAL(cf_cv_netlibs,[
+AC_MSG_RESULT(working...)
+cf_cv_netlibs=""
+cf_test_netlibs=yes
+AC_CHECK_FUNCS(gethostname,,[
+	CF_RECHECK_FUNC(gethostname,nsl,cf_cv_netlibs,[
+		CF_RECHECK_FUNC(gethostname,socket,cf_cv_netlibs)])])
+#
+# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
+# I don't know the entrypoints - 97/7/22 TD
+AC_CHECK_LIB(inet,main,cf_cv_netlibs="-linet $cf_cv_netlibs")
+#
+if test "$ac_cv_func_lsocket" != no ; then
+AC_CHECK_FUNCS(socket,,[
+	CF_RECHECK_FUNC(socket,socket,cf_cv_netlibs,[
+		CF_RECHECK_FUNC(socket,bsd,cf_cv_netlibs)])])
+fi
+#
+AC_CHECK_FUNCS(gethostbyname,,[
+	CF_RECHECK_FUNC(gethostbyname,nsl,cf_cv_netlibs)])
+#
+AC_CHECK_FUNCS(strcasecmp,,[
+	CF_RECHECK_FUNC(strcasecmp,resolv,cf_cv_netlibs)])
+])
+LIBS="$LIBS $cf_cv_netlibs"
+test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&AC_FD_MSG
+])dnl
+dnl ---------------------------------------------------------------------------
+dnl Re-check on a function to see if we can pick it up by adding a library.
+dnl	$1 = function to check
+dnl	$2 = library to check in
+dnl	$3 = environment to update (e.g., $LIBS)
+dnl	$4 = what to do if this fails
+dnl
+dnl This uses 'unset' if the shell happens to support it, but leaves the
+dnl configuration variable set to 'unknown' if not.  This is a little better
+dnl than the normal autoconf test, which gives misleading results if a test
+dnl for the function is made (e.g., with AC_CHECK_FUNC) after this macro is
+dnl used (autoconf does not distinguish between a null token and one that is
+dnl set to 'no').
+AC_DEFUN([CF_RECHECK_FUNC],[
+AC_CHECK_LIB($2,$1,[
+	CF_UPPER(cf_tr_func,$1)
+	AC_DEFINE_UNQUOTED(HAVE_$cf_tr_func)
+	ac_cv_func_$1=yes
+	$3="-l$2 [$]$3"],[
+	ac_cv_func_$1=unknown
+	unset ac_cv_func_$1 2>/dev/null
+	$4],
+	[[$]$3])
+])dnl
+dnl ---------------------------------------------------------------------------
+dnl Make an uppercase version of a variable
+dnl $1=uppercase($2)
+AC_DEFUN([CF_UPPER],
+[
+changequote(,)dnl
+$1=`echo $2 | tr '[a-z]' '[A-Z]'`
+changequote([,])dnl
+])dnl
+
+dnl ---------------------------------------------------------------------------
+dnl Got this from the GNU tar 1.13.11 distribution
+dnl by Paul Eggert <eggert@twinsun.com>
+dnl ---------------------------------------------------------------------------
+
+dnl By default, many hosts won't let programs access large files;
+dnl one must use special compiler options to get large-file access to work.
+dnl For more details about this brain damage please see:
+dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
+
+dnl Written by Paul Eggert <eggert@twinsun.com>.
+
+dnl Internal subroutine of AC_SYS_LARGEFILE.
+dnl AC_SYS_LARGEFILE_FLAGS(FLAGSNAME)
+AC_DEFUN(AC_SYS_LARGEFILE_FLAGS,
+  [AC_CACHE_CHECK([for $1 value to request large file support],
+     ac_cv_sys_largefile_$1,
+     [ac_cv_sys_largefile_$1=`($GETCONF LFS_$1) 2>/dev/null` || {
+	ac_cv_sys_largefile_$1=no
+	ifelse($1, CFLAGS,
+	  [case "$host_os" in
+	   # HP-UX 10.20 requires -D__STDC_EXT__ with gcc 2.95.1.
+changequote(, )dnl
+	   hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
+changequote([, ])dnl
+	     if test "$GCC" = yes; then
+	       ac_cv_sys_largefile_CFLAGS=-D__STDC_EXT__
+	     fi
+	     ;;
+	   # IRIX 6.2 and later require cc -n32.
+changequote(, )dnl
+	   irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
+changequote([, ])dnl
+	     if test "$GCC" != yes; then
+	       ac_cv_sys_largefile_CFLAGS=-n32
+	     fi
+	   esac
+	   if test "$ac_cv_sys_largefile_CFLAGS" != no; then
+	     ac_save_CC="$CC"
+	     CC="$CC $ac_cv_sys_largefile_CFLAGS"
+	     AC_TRY_LINK(, , , ac_cv_sys_largefile_CFLAGS=no)
+	     CC="$ac_save_CC"
+	   fi])
+      }])])
+
+dnl Internal subroutine of AC_SYS_LARGEFILE.
+dnl AC_SYS_LARGEFILE_SPACE_APPEND(VAR, VAL)
+AC_DEFUN(AC_SYS_LARGEFILE_SPACE_APPEND,
+  [case $2 in
+   no) ;;
+   ?*)
+     case "[$]$1" in
+     '') $1=$2 ;;
+     *) $1=[$]$1' '$2 ;;
+     esac ;;
+   esac])
+
+dnl Internal subroutine of AC_SYS_LARGEFILE.
+dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
+AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
+  [AC_CACHE_CHECK([for $1], $2,
+     [$2=no
+changequote(, )dnl
+      $4
+      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
+	case "$ac_flag" in
+	-D$1)
+	  $2=1 ;;
+	-D$1=*)
+	  $2=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
+	esac
+      done
+changequote([, ])dnl
+      ])
+   if test "[$]$2" != no; then
+     AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
+   fi])
+
+AC_DEFUN(AC_SYS_LARGEFILE,
+  [AC_REQUIRE([AC_CANONICAL_HOST])
+   AC_ARG_ENABLE(largefile,
+     [  --disable-largefile     omit support for large files])
+   if test "$enable_largefile" != no; then
+     AC_CHECK_TOOL(GETCONF, getconf)
+     AC_SYS_LARGEFILE_FLAGS(CFLAGS)
+     AC_SYS_LARGEFILE_FLAGS(LDFLAGS)
+     AC_SYS_LARGEFILE_FLAGS(LIBS)
+
+     for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
+       case "$ac_flag" in
+       no) ;;
+       -D_FILE_OFFSET_BITS=*) ;;
+       -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
+       -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
+       -D?* | -I?*)
+	 AC_SYS_LARGEFILE_SPACE_APPEND(CPPFLAGS, "$ac_flag") ;;
+       *)
+	 AC_SYS_LARGEFILE_SPACE_APPEND(CFLAGS, "$ac_flag") ;;
+       esac
+     done
+     AC_SYS_LARGEFILE_SPACE_APPEND(LDFLAGS, "$ac_cv_sys_largefile_LDFLAGS")
+     AC_SYS_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
+     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
+       ac_cv_sys_file_offset_bits,
+       [Number of bits in a file offset, on hosts where this is settable.],
+       [case "$host_os" in
+	# HP-UX 10.20 and later
+	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
+	  ac_cv_sys_file_offset_bits=64 ;;
+	esac])
+     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE,
+       ac_cv_sys_largefile_source,
+       [Define to make fseeko etc. visible, on some hosts.],
+       [case "$host_os" in
+	# HP-UX 10.20 and later
+	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
+	  ac_cv_sys_largefile_source=1 ;;
+	esac])
+     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES,
+       ac_cv_sys_large_files,
+       [Define for large files, on AIX-style hosts.],
+       [case "$host_os" in
+	# AIX 4.2 and later
+	aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
+	  ac_cv_sys_large_files=1 ;;
+	esac])
+   fi
+  ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl From Paul Eggert <eggert@twinsun.com>
+
+dnl Define HAVE_INTTYPES_H if <inttypes.h> exists,
+dnl doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
+[
+  if test x = y; then
+    dnl This code is deliberately never run via ./configure.
+    dnl FIXME: this is a gross hack to make autoheader put an entry
+    dnl for `HAVE_INTTYPES_H' in config.h.in.
+    AC_CHECK_FUNCS(INTTYPES_H)
+  fi
+  AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+  [AC_TRY_COMPILE(
+    [#include <sys/types.h>
+#include <inttypes.h>],
+    [uintmax_t i = (uintmax_t) -1;],
+    jm_ac_cv_header_inttypes_h=yes,
+    jm_ac_cv_header_inttypes_h=no)])
+  if test $jm_ac_cv_header_inttypes_h = yes; then
+    ac_kludge=HAVE_INTTYPES_H
+    AC_DEFINE_UNQUOTED($ac_kludge)
+  fi
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl From Paul Eggert <eggert@twinsun.com>
+
+AC_DEFUN(AC_STRUCT_ST_MTIM_NSEC,
+ [AC_CACHE_CHECK([for nanoseconds member of struct stat.st_mtim],
+   ac_cv_struct_st_mtim_nsec,
+   [ac_save_CPPFLAGS="$CPPFLAGS"
+    ac_cv_struct_st_mtim_nsec=no
+    # tv_nsec -- the usual case
+    # _tv_nsec -- Solaris 2.6, if
+    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
+    #	 && !defined __EXTENSIONS__)
+    # st__tim.tv_nsec -- UnixWare 2.1.2
+    for ac_val in tv_nsec _tv_nsec st__tim.tv_nsec; do
+      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
+      AC_TRY_COMPILE([#include <sys/types.h>
+#include <sys/stat.h>], [struct stat s; s.st_mtim.ST_MTIM_NSEC;],
+        [ac_cv_struct_st_mtim_nsec=$ac_val; break])
+    done
+    CPPFLAGS="$ac_save_CPPFLAGS"])
+
+  if test $ac_cv_struct_st_mtim_nsec != no; then
+    AC_DEFINE_UNQUOTED(ST_MTIM_NSEC, $ac_cv_struct_st_mtim_nsec)
+  fi
+ ]
+)
+
+dnl ---------------------------------------------------------------------------
+dnl From Paul Eggert <eggert@twinsun.com>
+
+dnl Define uintmax_t to `unsigned long' or `unsigned long long'
+dnl if <inttypes.h> does not exist.
+
+AC_DEFUN(jm_AC_TYPE_UINTMAX_T,
+[
+  AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+  if test $jm_ac_cv_header_inttypes_h = no; then
+    AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+    [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+      [unsigned long long ullmax = (unsigned long long) -1;
+       return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+      ac_cv_type_unsigned_long_long=yes,
+      ac_cv_type_unsigned_long_long=no)])
+    if test $ac_cv_type_unsigned_long_long = yes; then
+      AC_DEFINE(uintmax_t, unsigned long long)
+    else
+      AC_DEFINE(uintmax_t, unsigned long)
+    fi
+  fi
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl From Steve Robbins <steve@nyongwa.montreal.qc.ca>
+
+dnl From a proposed change made on the autoconf list on 2 Feb 1999
+dnl http://sourceware.cygnus.com/ml/autoconf/1999-02/msg00001.html
+dnl Patch for AIX 3.2 by Lars Hecking <lhecking@nmrc.ucc.ie> on 17 May 1999
+
+AC_DEFUN(AC_FUNC_SELECT,
+[AC_CHECK_FUNCS(select)
+if test "$ac_cv_func_select" = yes; then
+  AC_CHECK_HEADERS(unistd.h sys/types.h sys/time.h sys/select.h sys/socket.h)
+  AC_MSG_CHECKING([argument types of select()])
+  AC_CACHE_VAL(ac_cv_type_fd_set_size_t,dnl
+    [AC_CACHE_VAL(ac_cv_type_fd_set,dnl
+      [for ac_cv_type_fd_set in 'fd_set' 'int' 'void'; do
+        for ac_cv_type_fd_set_size_t in 'int' 'size_t' 'unsigned long' 'unsigned'; do
+          for ac_type_timeval in 'struct timeval' 'const struct timeval'; do
+            AC_TRY_COMPILE(dnl
+[#ifdef HAVE_SYS_TIME_H
+#include <sys/time.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif],
+[#ifdef __STDC__
+extern select ($ac_cv_type_fd_set_size_t,
+ $ac_cv_type_fd_set *,  $ac_cv_type_fd_set *, $ac_cv_type_fd_set *,
+ $ac_type_timeval *);
+#else
+extern select ();
+  $ac_cv_type_fd_set_size_t s;
+  $ac_cv_type_fd_set *p;
+  $ac_type_timeval *t;
+#endif],
+[ac_found=yes ; break 3],ac_found=no)
+          done
+        done
+      done
+    ])dnl AC_CACHE_VAL
+  ])dnl AC_CACHE_VAL
+  if test "$ac_found" = no; then
+    AC_MSG_ERROR([can't determine argument types])
+  fi
+
+  AC_MSG_RESULT([select($ac_cv_type_fd_set_size_t,$ac_cv_type_fd_set *,...)])
+  AC_DEFINE_UNQUOTED(fd_set_size_t, $ac_cv_type_fd_set_size_t)
+  ac_cast=
+  if test "$ac_cv_type_fd_set" != fd_set; then
+    # Arguments 2-4 are not fd_set.  Some weirdo systems use fd_set type for
+    # FD_SET macros, but insist that you cast the argument to select.  I don't
+    # understand why that might be, but it means we cannot define fd_set.
+    AC_EGREP_CPP(dnl
+changequote(<<,>>)dnl
+<<(^|[^a-zA-Z_0-9])fd_set[^a-zA-Z_0-9]>>dnl
+changequote([,]),dnl
+[#ifdef HAVE_SYS_TIME_H
+#include <sys/time.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif],dnl
+    # We found fd_set type in a header, need special cast
+    ac_cast="($ac_cv_type_fd_set *)",dnl
+    # No fd_set type; it is safe to define it
+    AC_DEFINE_UNQUOTED(fd_set,$ac_cv_type_fd_set))
+  fi
+  AC_DEFINE_UNQUOTED(SELECT_FD_SET_CAST,$ac_cast)
+fi
+])
+
+
+# The following is taken from automake 1.4,
+# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
+# because only the former supports 64-bit integral types on HP-UX 10.20.
+
+## ----------------------------------------- ##
+## ANSIfy the C compiler whenever possible.  ##
+## From Franc,ois Pinard                     ##
+## ----------------------------------------- ##
+
+# serial 2
+
+# @defmac AC_PROG_CC_STDC
+# @maindex PROG_CC_STDC
+# @ovindex CC
+# If the C compiler in not in ANSI C mode by default, try to add an option
+# to output variable @code{CC} to make it so.  This macro tries various
+# options that select ANSI C on some system or another.  It considers the
+# compiler to be in ANSI C mode if it handles function prototypes correctly.
+#
+# If you use this macro, you should check after calling it whether the C
+# compiler has been set to accept ANSI C; if not, the shell variable
+# @code{am_cv_prog_cc_stdc} is set to @samp{no}.  If you wrote your source
+# code in ANSI C, you can make an un-ANSIfied copy of it by using the
+# program @code{ansi2knr}, which comes with Ghostscript.
+# @end defmac
+
+AC_DEFUN(AM_PROG_CC_STDC,
+[AC_REQUIRE([AC_PROG_CC])
+AC_BEFORE([$0], [AC_C_INLINE])
+AC_BEFORE([$0], [AC_C_CONST])
+dnl Force this before AC_PROG_CPP.  Some cpp's, eg on HPUX, require
+dnl a magic option to avoid problems with ANSI preprocessor commands
+dnl like #elif.
+dnl FIXME: can't do this because then AC_AIX won't work due to a
+dnl circular dependency.
+dnl AC_BEFORE([$0], [AC_PROG_CPP])
+AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
+AC_CACHE_VAL(am_cv_prog_cc_stdc,
+[am_cv_prog_cc_stdc=no
+ac_save_CC="$CC"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX			-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  AC_TRY_COMPILE(
+[#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+], [
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+],
+[am_cv_prog_cc_stdc="$ac_arg"; break])
+done
+CC="$ac_save_CC"
+])
+if test -z "$am_cv_prog_cc_stdc"; then
+  AC_MSG_RESULT([none needed])
+else
+  AC_MSG_RESULT($am_cv_prog_cc_stdc)
+fi
+case "x$am_cv_prog_cc_stdc" in
+  x|xno) ;;
+  *) CC="$CC $am_cv_prog_cc_stdc" ;;
+esac
+])

alloca.c

@@ -25,6 +25,13 @@
 #include <config.h>
 #endif
 
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
 #ifdef emacs
 #include "blockinput.h"
 #endif
@@ -66,7 +73,9 @@ typedef void *pointer;
 typedef char *pointer;
 #endif
 
+#ifndef NULL
 #define	NULL	0
+#endif
 
 /* Different portions of Emacs need to call different versions of
    malloc.  The Emacs executable needs alloca to call xmalloc, because
@@ -171,7 +180,7 @@ alloca (size)
 #endif
 
   /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently. */
+     was allocated from deeper in the stack than currently.  */
 
   {
     register header *hp;	/* Traverses linked list.  */
@@ -209,6 +218,9 @@ alloca (size)
     register pointer new = malloc (sizeof (header) + size);
     /* Address of header.  */
 
+    if (new == 0)
+      abort();
+
     ((header *) new)->h.next = last_alloca_header;
     ((header *) new)->h.deep = depth;
 
@@ -338,7 +350,7 @@ struct stk_trailer
 
 #ifdef CRAY2
 /* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much. */
+   I doubt that "lint" will like this much.  */
 
 static long
 i00afunc (long *address)

amiga.c

@@ -0,0 +1,123 @@
+/* Running commands on Amiga
+Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU Make is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Make; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+MA 02111-1307, USA.  */
+
+#include "make.h"
+#include "variable.h"
+#include "amiga.h"
+#include <assert.h>
+#include <exec/memory.h>
+#include <dos/dostags.h>
+#include <proto/exec.h>
+#include <proto/dos.h>
+
+static const char Amiga_version[] = "$VER: Make 3.74.3 (12.05.96) \n"
+		    "Amiga Port by A. Digulla (digulla@home.lake.de)";
+
+int
+MyExecute (argv)
+char ** argv;
+{
+    char * buffer, * ptr;
+    char ** aptr;
+    int len = 0;
+    int status;
+
+    for (aptr=argv; *aptr; aptr++)
+    {
+	len += strlen (*aptr) + 4;
+    }
+
+    buffer = AllocMem (len, MEMF_ANY);
+
+    if (!buffer)
+      fatal (NILF, "MyExecute: Cannot allocate space for calling a command");
+
+    ptr = buffer;
+
+    for (aptr=argv; *aptr; aptr++)
+    {
+	if (((*aptr)[0] == ';' && !(*aptr)[1]))
+	{
+	    *ptr ++ = '"';
+	    strcpy (ptr, *aptr);
+	    ptr += strlen (ptr);
+	    *ptr ++ = '"';
+	}
+	else if ((*aptr)[0] == '@' && (*aptr)[1] == '@' && !(*aptr)[2])
+	{
+	    *ptr ++ = '\n';
+	    continue;
+	}
+	else
+	{
+	    strcpy (ptr, *aptr);
+	    ptr += strlen (ptr);
+	}
+	*ptr ++ = ' ';
+	*ptr = 0;
+    }
+
+    ptr[-1] = '\n';
+
+    status = SystemTags (buffer,
+	SYS_UserShell, TRUE,
+	TAG_END);
+
+    FreeMem (buffer, len);
+
+    if (SetSignal(0L,0L) & SIGBREAKF_CTRL_C)
+	status = 20;
+
+    /* Warnings don't count */
+    if (status == 5)
+	status = 0;
+
+    return status;
+}
+
+char *
+wildcard_expansion (wc, o)
+char * wc, * o;
+{
+#   define PATH_SIZE	1024
+    struct AnchorPath * apath;
+
+    if ( (apath = AllocMem (sizeof (struct AnchorPath) + PATH_SIZE,
+	    MEMF_CLEAR))
+	)
+    {
+	apath->ap_Strlen = PATH_SIZE;
+
+	if (MatchFirst (wc, apath) == 0)
+	{
+	    do
+	    {
+		o = variable_buffer_output (o, apath->ap_Buf,
+			strlen (apath->ap_Buf));
+		o = variable_buffer_output (o, " ",1);
+	    } while (MatchNext (apath) == 0);
+	}
+
+	MatchEnd (apath);
+	FreeMem (apath, sizeof (struct AnchorPath) + PATH_SIZE);
+    }
+
+    return o;
+}
+

amiga.h

@@ -0,0 +1,22 @@
+/* Definitions for amiga specific things
+Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU Make is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Make; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+MA 02111-1307, USA.  */
+
+extern int MyExecute PARAMS ((char ** argv));
+extern char * wildcard_expansion PARAMS ((char * wc, char * o));
+

ar.c

@@ -1,5 +1,5 @@
 /* Interface to `ar' archives for GNU Make.
-Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,21 +14,23 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 
 #ifndef	NO_ARCHIVES
 
-#include "file.h"
+#include "filedef.h"
 #include "dep.h"
 #include <fnmatch.h>
 
 /* Defined in arscan.c.  */
-extern long int ar_scan ();
-extern int ar_member_touch ();
-extern int ar_name_equal ();
-
+extern long int ar_scan PARAMS ((char *archive, long int (*function) (), long int arg));
+extern int ar_name_equal PARAMS ((char *name, char *mem, int truncated));
+#ifndef VMS
+extern int ar_member_touch PARAMS ((char *arname, char *memname));
+#endif
 
 /* Return nonzero if NAME is an archive-member reference, zero if not.
    An archive-member reference is a name like `lib(member)'.
@@ -40,12 +42,12 @@ ar_name (name)
      char *name;
 {
   char *p = index (name, '('), *end = name + strlen (name) - 1;
-  
+
   if (p == 0 || p == name || *end != ')')
     return 0;
 
   if (p[1] == '(' && end[-1] == ')')
-    fatal ("attempt to use unsupported feature: `%s'", name);
+    fatal (NILF, _("attempt to use unsupported feature: `%s'"), name);
 
   return 1;
 }
@@ -66,9 +68,10 @@ ar_parse_name (name, arname_p, memname_p)
 
   if (memname_p != 0)
     *memname_p = savestring (p + 1, end - (p + 1));
-}  
+}
 
-static long int ar_member_date_1 ();
+static long int ar_member_date_1 PARAMS ((int desc, char *mem, int truncated, long int hdrpos,
+	long int datapos, long int size, long int date, int uid, int gid, int mode, char *name));
 
 /* Return the modtime of NAME.  */
 
@@ -130,6 +133,15 @@ ar_member_date_1 (desc, mem, truncated,
 
 /* Set the archive-member NAME's modtime to now.  */
 
+#ifdef VMS
+int
+ar_touch (name)
+     char *name;
+{
+  error (NILF, _("touch archive member is not available on VMS"));
+  return -1;
+}
+#else
 int
 ar_touch (name)
      char *name;
@@ -158,22 +170,24 @@ ar_touch (name)
   switch (ar_member_touch (arname, memname))
     {
     case -1:
-      error ("touch: Archive `%s' does not exist", arname);
+      error (NILF, _("touch: Archive `%s' does not exist"), arname);
       break;
     case -2:
-      error ("touch: `%s' is not a valid archive", arname);
+      error (NILF, _("touch: `%s' is not a valid archive"), arname);
       break;
     case -3:
       perror_with_name ("touch: ", arname);
       break;
     case 1:
-      error ("touch: Member `%s' does not exist in `%s'", memname, arname);
+      error (NILF,
+             _("touch: Member `%s' does not exist in `%s'"), memname, arname);
       break;
     case 0:
       val = 0;
       break;
     default:
-      error ("touch: Bad return code from ar_member_touch on `%s'", name);
+      error (NILF,
+             _("touch: Bad return code from ar_member_touch on `%s'"), name);
     }
 
   if (!arname_used)
@@ -182,6 +196,7 @@ ar_touch (name)
 
   return val;
 }
+#endif /* !VMS */
 
 /* State of an `ar_glob' run, passed to `ar_glob_match'.  */
 
@@ -221,15 +236,6 @@ ar_glob_match (desc, mem, truncated,
   return 0L;
 }
 
-/* Alphabetic sorting function for `qsort'.  */
-
-static int
-ar_glob_alphacompare (a, b)
-     char **a, **b;
-{
-  return strcmp (*a, *b);
-}
-
 /* Return nonzero if PATTERN contains any metacharacters.
    Metacharacters can be quoted with backslashes if QUOTE is nonzero.  */
 static int
@@ -304,7 +310,7 @@ ar_glob (arname, member_pattern, size)
     names[i++] = n->name;
 
   /* Sort them alphabetically.  */
-  qsort ((char *) names, i, sizeof (*names), ar_glob_alphacompare);
+  qsort ((char *) names, i, sizeof (*names), alpha_compare);
 
   /* Put them back into the chain in the sorted order.  */
   i = 0;

arscan.c

@@ -1,19 +1,20 @@
 /* Library function for scanning an archive file.
-   Copyright (C) 1987, 89, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1987,89,91,92,93,94,95,97 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
 
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+USA.  */
 
 #include "make.h"
 
@@ -25,6 +26,172 @@
 
 #ifndef	NO_ARCHIVES
 
+#ifdef VMS
+#include <lbrdef.h>
+#include <mhddef.h>
+#include <credef.h>
+#include <descrip.h>
+#include <ctype.h>
+#if __DECC
+#include <unixlib.h>
+#include <lbr$routines.h>
+#endif
+
+#define uppercasify(str) {char *str1; for (str1 = str; *str1; str1++) *str1 = _toupper(*str1);}
+
+static void *VMS_lib_idx;
+
+static char *VMS_saved_memname;
+
+static time_t VMS_member_date;
+
+static long int (*VMS_function) ();
+
+static int
+VMS_get_member_info (module, rfa)
+     struct dsc$descriptor_s *module;
+     unsigned long *rfa;
+{
+  int status, i;
+  long int fnval;
+
+  time_t val;
+
+  static struct dsc$descriptor_s bufdesc =
+    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
+
+  struct mhddef *mhd;
+  char filename[128];
+
+  bufdesc.dsc$a_pointer = filename;
+  bufdesc.dsc$w_length = sizeof (filename);
+
+  status = lbr$set_module (&VMS_lib_idx, rfa, &bufdesc,
+			   &bufdesc.dsc$w_length, 0);
+  if (! status)
+    {
+      error (NILF, _("lbr$set_module failed to extract module info, status = %d"),
+	     status);
+
+      lbr$close (&VMS_lib_idx);
+
+      return 0;
+    }
+
+  mhd = (struct mhddef *) filename;
+
+  val = decc$fix_time (&mhd->mhd$l_datim);
+
+  for (i = 0; i < module->dsc$w_length; i++)
+    filename[i] = _tolower (module->dsc$a_pointer[i]);
+
+  filename[i] = '\0';
+
+  VMS_member_date = (time_t) -1;
+
+  fnval =
+    (*VMS_function) (-1, filename, 0, 0, 0, 0, val, 0, 0, 0,
+		     VMS_saved_memname);
+
+  if (fnval)
+    {
+      VMS_member_date = fnval;
+      return 0;
+    }
+  else
+    return 1;
+}
+
+/* Takes three arguments ARCHIVE, FUNCTION and ARG.
+
+   Open the archive named ARCHIVE, find its members one by one,
+   and for each one call FUNCTION with the following arguments:
+     archive file descriptor for reading the data,
+     member name,
+     member name might be truncated flag,
+     member header position in file,
+     member data position in file,
+     member data size,
+     member date,
+     member uid,
+     member gid,
+     member protection mode,
+     ARG.
+
+   NOTE: on VMS systems, only name, date, and arg are meaningful!
+
+   The descriptor is poised to read the data of the member
+   when FUNCTION is called.  It does not matter how much
+   data FUNCTION reads.
+
+   If FUNCTION returns nonzero, we immediately return
+   what FUNCTION returned.
+
+   Returns -1 if archive does not exist,
+   Returns -2 if archive has invalid format.
+   Returns 0 if have scanned successfully.  */
+
+long int
+ar_scan (archive, function, arg)
+     char *archive;
+     long int (*function) ();
+     long int arg;
+{
+  char *p;
+
+  static struct dsc$descriptor_s libdesc =
+    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
+
+  unsigned long func = LBR$C_READ;
+  unsigned long type = LBR$C_TYP_UNK;
+  unsigned long index = 1;
+
+  int status;
+
+  status = lbr$ini_control (&VMS_lib_idx, &func, &type, 0);
+
+  if (! status)
+    {
+      error (NILF, _("lbr$ini_control failed with status = %d"),status);
+      return -2;
+    }
+
+  libdesc.dsc$a_pointer = archive;
+  libdesc.dsc$w_length = strlen (archive);
+
+  status = lbr$open (&VMS_lib_idx, &libdesc, 0, 0, 0, 0, 0);
+
+  if (! status)
+    {
+      error (NILF, _("unable to open library `%s' to lookup member `%s'"),
+	     archive, (char *)arg);
+      return -1;
+    }
+
+  VMS_saved_memname = (char *)arg;
+
+  /* For comparison, delete .obj from arg name.  */
+
+  p = rindex (VMS_saved_memname, '.');
+  if (p)
+    *p = '\0';
+
+  VMS_function = function;
+
+  VMS_member_date = (time_t) -1;
+  lbr$get_index (&VMS_lib_idx, &index, VMS_get_member_info, 0);
+
+  /* Undo the damage.  */
+  if (p)
+    *p = '.';
+
+  lbr$close (&VMS_lib_idx);
+
+  return VMS_member_date > 0 ? VMS_member_date : 0;
+}
+
+#else /* !VMS */
+
 /* SCO Unix's compiler defines both of these.  */
 #ifdef	M_UNIX
 #undef	M_XENIX
@@ -47,11 +214,46 @@
 #endif
 #endif
 
-#include <ar.h>
+/* On AIX, define these symbols to be sure to get both archive formats.
+   AIX 4.3 introduced the "big" archive format to support 64-bit object
+   files, so on AIX 4.3 systems we need to support both the "normal" and
+   "big" archive formats.  An archive's format is indicated in the
+   "fl_magic" field of the "FL_HDR" structure.  For a normal archive,
+   this field will be the string defined by the AIAMAG symbol.  For a
+   "big" archive, it will be the string defined by the AIAMAGBIG symbol
+   (at least on AIX it works this way).
+
+   Note: we'll define these symbols regardless of which AIX version
+   we're compiling on, but this is okay since we'll use the new symbols
+   only if they're present.  */
+#ifdef _AIX
+# define __AR_SMALL__
+# define __AR_BIG__
+#endif
+
+#ifndef WINDOWS32
+# include <ar.h>
+#else
+/* These should allow us to read Windows (VC++) libraries (according to Frank
+ * Libbrecht <frankl@abzx.belgium.hp.com>)
+ */
+# include <windows.h>
+# include <windef.h>
+# include <io.h>
+# define ARMAG      IMAGE_ARCHIVE_START
+# define SARMAG     IMAGE_ARCHIVE_START_SIZE
+# define ar_hdr     _IMAGE_ARCHIVE_MEMBER_HEADER
+# define ar_name    Name
+# define ar_mode    Mode
+# define ar_size    Size
+# define ar_date    Date
+# define ar_uid     UserID
+# define ar_gid     GroupID
+#endif
 
 /* Cray's <ar.h> apparently defines this.  */
 #ifndef	AR_HDR_SIZE
-#define	AR_HDR_SIZE	(sizeof (struct ar_hdr))
+# define   AR_HDR_SIZE	(sizeof (struct ar_hdr))
 #endif
 
 /* Takes three arguments ARCHIVE, FUNCTION and ARG.
@@ -89,6 +291,10 @@ ar_scan (archive, function, arg)
 {
 #ifdef AIAMAG
   FL_HDR fl_header;
+#ifdef AIAMAGBIG
+  int big_archive = 0;
+  FL_HDR_BIG fl_header_big;
+#endif
 #else
   int long_name = 0;
 #endif
@@ -110,11 +316,42 @@ ar_scan (archive, function, arg)
 #ifdef AIAMAG
   {
     register int nread = read (desc, (char *) &fl_header, FL_HSZ);
-    if (nread != FL_HSZ || bcmp (fl_header.fl_magic, AIAMAG, SAIAMAG))
+
+    if (nread != FL_HSZ)
       {
 	(void) close (desc);
 	return -2;
       }
+#ifdef AIAMAGBIG
+    /* If this is a "big" archive, then set the flag and
+       re-read the header into the "big" structure. */
+    if (!bcmp (fl_header.fl_magic, AIAMAGBIG, SAIAMAG))
+      {
+	big_archive = 1;
+
+	/* seek back to beginning of archive */
+	if (lseek (desc, 0, 0) < 0)
+	  {
+	    (void) close (desc);
+	    return -2;
+	  }
+
+	/* re-read the header into the "big" structure */
+	nread = read (desc, (char *) &fl_header_big, FL_HSZ_BIG);
+	if (nread != FL_HSZ_BIG)
+	  {
+	    (void) close (desc);
+	    return -2;
+	  }
+      }
+    else
+#endif
+       /* Check to make sure this is a "normal" archive. */
+      if (bcmp (fl_header.fl_magic, AIAMAG, SAIAMAG))
+	{
+          (void) close (desc);
+          return -2;
+	}
   }
 #else
   {
@@ -142,8 +379,25 @@ ar_scan (archive, function, arg)
     long int member_offset;
     long int last_member_offset;
 
-    sscanf (fl_header.fl_fstmoff, "%12ld", &member_offset);
-    sscanf (fl_header.fl_lstmoff, "%12ld", &last_member_offset);
+#ifdef AIAMAGBIG
+    if ( big_archive )
+      {
+	sscanf (fl_header_big.fl_fstmoff, "%20ld", &member_offset);
+	sscanf (fl_header_big.fl_lstmoff, "%20ld", &last_member_offset);
+      }
+    else
+#endif
+      {
+	sscanf (fl_header.fl_fstmoff, "%12ld", &member_offset);
+	sscanf (fl_header.fl_lstmoff, "%12ld", &last_member_offset);
+      }
+
+    if (member_offset == 0)
+      {
+	/* Empty archive.  */
+	close (desc);
+	return 0;
+      }
 #else
 #ifndef	M_XENIX
     register long int member_offset = sizeof (int);
@@ -157,6 +411,9 @@ ar_scan (archive, function, arg)
       {
 	register int nread;
 	struct ar_hdr member_header;
+#ifdef AIAMAGBIG
+	struct ar_hdr_big member_header_big;
+#endif
 #ifdef AIAMAG
 	char name[256];
 	int name_len;
@@ -179,34 +436,73 @@ ar_scan (archive, function, arg)
 	  }
 
 #ifdef AIAMAG
-#define	AR_MEMHDR	(AR_HDR_SIZE - sizeof (member_header._ar_name))
-	nread = read (desc, (char *) &member_header, AR_MEMHDR);
+#define       AR_MEMHDR_SZ(x) (sizeof(x) - sizeof (x._ar_name))
 
-	if (nread != AR_MEMHDR)
+#ifdef AIAMAGBIG
+	if (big_archive)
 	  {
-	    (void) close (desc);
-	    return -2;
+	    nread = read (desc, (char *) &member_header_big,
+			  AR_MEMHDR_SZ(member_header_big) );
+
+	    if (nread != AR_MEMHDR_SZ(member_header_big))
+	      {
+		(void) close (desc);
+		return -2;
+	      }
+
+	    sscanf (member_header_big.ar_namlen, "%4d", &name_len);
+	    nread = read (desc, name, name_len);
+
+	    if (nread != name_len)
+	      {
+		(void) close (desc);
+		return -2;
+	      }
+
+	    name[name_len] = 0;
+
+	    sscanf (member_header_big.ar_date, "%12ld", &dateval);
+	    sscanf (member_header_big.ar_uid, "%12d", &uidval);
+	    sscanf (member_header_big.ar_gid, "%12d", &gidval);
+	    sscanf (member_header_big.ar_mode, "%12o", &eltmode);
+	    sscanf (member_header_big.ar_size, "%20ld", &eltsize);
+
+	    data_offset = (member_offset + AR_MEMHDR_SZ(member_header_big)
+			   + name_len + 2);
 	  }
-
-	sscanf (member_header.ar_namlen, "%4d", &name_len);
-	nread = read (desc, name, name_len);
-
-	if (nread != name_len)
+	else
+#endif
 	  {
-	    (void) close (desc);
-	    return -2;
+	    nread = read (desc, (char *) &member_header,
+			  AR_MEMHDR_SZ(member_header) );
+
+	    if (nread != AR_MEMHDR_SZ(member_header))
+	      {
+		(void) close (desc);
+		return -2;
+	      }
+
+	    sscanf (member_header.ar_namlen, "%4d", &name_len);
+	    nread = read (desc, name, name_len);
+
+	    if (nread != name_len)
+	      {
+		(void) close (desc);
+		return -2;
+	      }
+
+	    name[name_len] = 0;
+
+	    sscanf (member_header.ar_date, "%12ld", &dateval);
+	    sscanf (member_header.ar_uid, "%12d", &uidval);
+	    sscanf (member_header.ar_gid, "%12d", &gidval);
+	    sscanf (member_header.ar_mode, "%12o", &eltmode);
+	    sscanf (member_header.ar_size, "%12ld", &eltsize);
+
+	    data_offset = (member_offset + AR_MEMHDR_SZ(member_header)
+			   + name_len + 2);
 	  }
-	
-	name[name_len] = 0;
-
-	sscanf (member_header.ar_date, "%12ld", &dateval);
-	sscanf (member_header.ar_uid, "%12d", &uidval);
-	sscanf (member_header.ar_gid, "%12d", &gidval);
-	sscanf (member_header.ar_mode, "%12o", &eltmode);
-	sscanf (member_header.ar_size, "%12ld", &eltsize);
-
-	if ((data_offset = member_offset + AR_MEMHDR + name_len + 2) % 2)
-	    ++data_offset;
+	data_offset += data_offset % 2;
 
 	fnval =
 	  (*function) (desc, name, 0,
@@ -221,8 +517,20 @@ ar_scan (archive, function, arg)
 	  break;
 
 	if (nread != AR_HDR_SIZE
-#ifdef ARFMAG
-	    || bcmp (member_header.ar_fmag, ARFMAG, 2)
+#if defined(ARFMAG) || defined(ARFZMAG)
+	    || (
+# ifdef ARFMAG
+                bcmp (member_header.ar_fmag, ARFMAG, 2)
+# else
+                1
+# endif
+                &&
+# ifdef ARFZMAG
+                bcmp (member_header.ar_fmag, ARFZMAG, 2)
+# else
+                1
+# endif
+               )
 #endif
 	    )
 	  {
@@ -270,7 +578,7 @@ ar_scan (archive, function, arg)
  		   && name[2] == '/')
  	    {
  	      int namesize = atoi (name + 3);
- 
+
  	      name = (char *) alloca (namesize + 1);
  	      nread = read (desc, name, namesize);
  	      if (nread != namesize)
@@ -320,7 +628,12 @@ ar_scan (archive, function, arg)
 	  /* End of the chain.  */
 	  break;
 
-	sscanf (member_header.ar_nxtmem, "%12ld", &member_offset);
+#ifdef AIAMAGBIG
+	if (big_archive)
+          sscanf (member_header_big.ar_nxtmem, "%20ld", &member_offset);
+	else
+#endif
+	  sscanf (member_header.ar_nxtmem, "%12ld", &member_offset);
 
 	if (lseek (desc, member_offset, 0) != member_offset)
 	  {
@@ -344,7 +657,7 @@ ar_scan (archive, function, arg)
  		(void) close (desc);
  		return -2;
  	      }
- 
+
  	    /* The names are separated by newlines.  Some formats have
  	       a trailing slash.  Null terminate the strings for
  	       convenience.  */
@@ -358,7 +671,7 @@ ar_scan (archive, function, arg)
  		      clear[-1] = '\0';
  		  }
  	      }
- 
+
 	    is_namemap = 0;
  	  }
 
@@ -372,6 +685,7 @@ ar_scan (archive, function, arg)
   close (desc);
   return 0;
 }
+#endif /* !VMS */
 
 /* Return nonzero iff NAME matches MEM.
    If TRUNCATED is nonzero, MEM may be truncated to
@@ -388,38 +702,7 @@ ar_name_equal (name, mem, truncated)
   if (p != 0)
     name = p + 1;
 
-  /* We no longer use this kludge, since we
-     now support long archive member names.  */
-
-#if 0 && !defined (AIAMAG) && !defined (APOLLO)
-
-  {
-    /* `reallylongname.o' matches `reallylongnam.o'.
-       If member names have a trailing slash, that's `reallylongna.o'.  */
-
-    struct ar_hdr h;
-    unsigned int max = sizeof (h.ar_name);
-    unsigned int namelen, memlen;
-
-    if (strncmp (name, mem, max - 3))
-      return 0;
-
-    namelen = strlen (name);
-    memlen = strlen (mem);
-
-    if (namelen > memlen && memlen >= max - 1
-	&& name[namelen - 2] == '.' && name[namelen - 1] == 'o'
-	&& mem[memlen - 2] == '.' && mem[memlen - 1] == 'o')
-      return 1;
-
-    if (namelen != memlen)
-      return 0;
-
-    return (namelen < max - 3 || !strcmp (name + max - 3, mem + max - 3));
-  }
-
-#else	/* AIX or APOLLO.  */
-
+#ifndef VMS
   if (truncated)
     {
 #ifdef AIAMAG
@@ -427,22 +710,19 @@ ar_name_equal (name, mem, truncated)
       abort ();
 #else
       struct ar_hdr hdr;
-      return !strncmp (name, mem,
-		       sizeof (hdr.ar_name) - 
-#ifndef __hpux
-		       1
+#if !defined (__hpux) && !defined (cray)
+      return strneq (name, mem, sizeof(hdr.ar_name) - 1);
 #else
-		       2
-#endif /* __hpux */
-		       );
-#endif
+      return strneq (name, mem, sizeof(hdr.ar_name) - 2);
+#endif /* !__hpux && !cray */
+#endif /* !AIAMAG */
     }
+#endif /* !VMS */
 
   return !strcmp (name, mem);
-
-#endif
 }
 
+#ifndef VMS
 /* ARGSUSED */
 static long int
 ar_member_pos (desc, mem, truncated,
@@ -495,12 +775,9 @@ ar_member_touch (arname, memname)
   if (AR_HDR_SIZE != write (fd, (char *) &ar_hdr, AR_HDR_SIZE))
     goto lose;
   /* The file's mtime is the time we we want.  */
-#ifdef EINTR
-  while (fstat (fd, &statbuf) < 0 && errno == EINTR);
-#else
-  fstat (fd, &statbuf);
-#endif
-#if defined(ARFMAG) || defined(AIAMAG)
+  while (fstat (fd, &statbuf) < 0 && EINTR_SET)
+    ;
+#if defined(ARFMAG) || defined(ARFZMAG) || defined(AIAMAG) || defined(WINDOWS32)
   /* Advance member's time to that time */
   for (i = 0; i < sizeof ar_hdr.ar_date; i++)
     ar_hdr.ar_date[i] = ' ';
@@ -525,6 +802,7 @@ ar_member_touch (arname, memname)
   errno = i;
   return -3;
 }
+#endif
 
 #ifdef TEST
 
@@ -539,11 +817,11 @@ describe_member (desc, name, truncated,
 {
   extern char *ctime ();
 
-  printf ("Member `%s'%s: %ld bytes at %ld (%ld).\n",
-	  name, truncated ? " (name might be truncated)" : "",
+  printf (_("Member `%s'%s: %ld bytes at %ld (%ld).\n"),
+	  name, truncated ? _(" (name might be truncated)") : "",
 	  size, hdrpos, datapos);
-  printf ("  Date %s", ctime (&date));
-  printf ("  uid = %d, gid = %d, mode = 0%o.\n", uid, gid, mode);
+  printf (_("  Date %s"), ctime (&date));
+  printf (_("  uid = %d, gid = %d, mode = 0%o.\n"), uid, gid, mode);
 
   return 0;
 }

build.template

@@ -1,10 +1,10 @@
 #!/bin/sh
-
 # Shell script to build GNU Make in the absence of any `make' program.
+# @configure_input@
 
-# Copyright (C) 1993 Free Software Foundation, Inc.
+# Copyright (C) 1993, 1994, 1997 Free Software Foundation, Inc.
 # This file is part of GNU Make.
-# 
+#
 # GNU Make is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
@@ -14,27 +14,30 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
-# 
+#
 # You should have received a copy of the GNU General Public License
 # along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 # See Makefile.in for comments describing these variables.
 
 srcdir='@srcdir@'
 CC='@CC@'
 CFLAGS='@CFLAGS@'
+CPPFLAGS='@CPPFLAGS@'
 LDFLAGS='@LDFLAGS@'
 defines='@DEFS@ -DLIBDIR="${libdir}" -DINCLUDEDIR="${includedir}"'
 ALLOCA='@ALLOCA@'
 LOADLIBES='@LIBS@'
 extras='@LIBOBJS@'
 REMOTE='@REMOTE@'
+GLOBLIB='@GLOBLIB@'
 
 # Common prefix for machine-independent installed files.
-prefix=/usr/local
+prefix='@prefix@'
 # Common prefix for machine-dependent installed files.
-exec_prefix=/usr/local
+exec_prefix='@exec_prefix@'
 # Directory to find libraries in for `-lXXX'.
 libdir=${exec_prefix}/lib
 # Directory to search by default for included makefiles.
@@ -46,10 +49,15 @@ set -e
 # These are all the objects we need to link together.
 objs="%objs% remote-${REMOTE}.o ${extras} ${ALLOCA}"
 
+if [ x"$GLOBLIB" != x ]; then
+  objs="$objs %globobjs%"
+fi
+
 # Compile the source files into those objects.
 for file in `echo ${objs} | sed 's/\.o/.c/g'`; do
   echo compiling ${file}...
-  $CC $CFLAGS $defines -c -I. -I${srcdir} -I${srcdir}/glob ${srcdir}/$file
+  $CC $defines $CPPFLAGS $CFLAGS \
+      -c -I. -I${srcdir} ${srcdir}/$file
 done
 
 # The object files were actually all put in the current directory.

build_w32.bat

@@ -0,0 +1,137 @@
+set make=gnumake
+cd w32\subproc
+echo "Creating the subproc library"
+%ComSpec% /c build.bat
+cd ..\..
+del link.dbg link.rel
+del config.h
+copy config.h.W32 config.h
+echo off
+echo "Creating GNU make for Windows 95/NT"
+echo on
+if not exist .\WinDebug\nul mkdir .\WinDebug
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D TIVOLI /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c variable.c
+echo WinDebug\variable.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c rule.c
+echo WinDebug\rule.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remote-stub.c
+echo WinDebug\remote-stub.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c commands.c
+echo WinDebug\commands.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c file.c
+echo WinDebug\file.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getloadavg.c
+echo WinDebug\getloadavg.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c default.c
+echo WinDebug\default.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c signame.c
+echo WinDebug\signame.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c expand.c
+echo WinDebug\expand.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c dir.c
+echo WinDebug\dir.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c main.c
+echo WinDebug\main.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt1.c
+echo WinDebug\getopt1.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c job.c
+echo WinDebug\job.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c read.c
+echo WinDebug\read.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c version.c
+echo WinDebug\version.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt.c
+echo WinDebug\getopt.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c arscan.c
+echo WinDebug\arscan.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remake.c
+echo WinDebug\remake.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c misc.c
+echo WinDebug\misc.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c ar.c
+echo WinDebug\ar.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c function.c
+echo WinDebug\function.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c vpath.c
+echo WinDebug\vpath.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c implicit.c
+echo WinDebug\implicit.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\dirent.c
+echo WinDebug\dirent.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\glob.c
+echo WinDebug\glob.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\fnmatch.c
+echo WinDebug\fnmatch.obj >>link.dbg
+cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\pathstuff.c
+echo WinDebug\pathstuff.obj >>link.dbg
+echo off
+echo "Linking WinDebug/%make%.exe"
+rem link.exe kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /MACHINE:I386 /OUT:.\WinDebug/%make%.exe .\WinDebug/variable.obj  .\WinDebug/rule.obj  .\WinDebug/remote-stub.obj  .\WinDebug/commands.obj  .\WinDebug/file.obj  .\WinDebug/getloadavg.obj  .\WinDebug/default.obj  .\WinDebug/signame.obj  .\WinDebug/expand.obj  .\WinDebug/dir.obj  .\WinDebug/main.obj  .\WinDebug/getopt1.obj  .\WinDebug/job.obj  .\WinDebug/read.obj  .\WinDebug/version.obj  .\WinDebug/getopt.obj  .\WinDebug/arscan.obj  .\WinDebug/remake.obj  .\WinDebug/misc.obj  .\WinDebug/ar.obj  .\WinDebug/function.obj  .\WinDebug/vpath.obj  .\WinDebug/implicit.obj  .\WinDebug/dirent.obj  .\WinDebug/glob.obj  .\WinDebug/fnmatch.obj  .\WinDebug/pathstuff.obj
+echo kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib >>link.dbg
+link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /MACHINE:I386 /OUT:.\WinDebug/%make%.exe @link.dbg
+if not exist .\WinDebug/%make%.exe echo "WinDebug build failed"
+if exist .\WinDebug/%make%.exe echo "WinDebug build succeeded!"
+if not exist .\WinRel\nul mkdir .\WinRel
+echo on
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /D TIVOLI /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c variable.c
+echo WinRel\variable.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c rule.c
+echo WinRel\rule.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remote-stub.c
+echo WinRel\remote-stub.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c commands.c
+echo WinRel\commands.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c file.c
+echo WinRel\file.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getloadavg.c
+echo WinRel\getloadavg.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c default.c
+echo WinRel\default.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c signame.c
+echo WinRel\signame.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c expand.c
+echo WinRel\expand.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c dir.c
+echo WinRel\dir.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c main.c
+echo WinRel\main.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt1.c
+echo WinRel\getopt1.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c job.c
+echo WinRel\job.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c read.c
+echo WinRel\read.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c version.c
+echo WinRel\version.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt.c
+echo WinRel\getopt.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c arscan.c
+echo WinRel\arscan.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remake.c
+echo WinRel\remake.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c misc.c
+echo WinRel\misc.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c ar.c
+echo WinRel\ar.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c function.c
+echo WinRel\function.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c vpath.c
+echo WinRel\vpath.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c implicit.c
+echo WinRel\implicit.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\dirent.c
+echo WinRel\dirent.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\glob.c
+echo WinRel\glob.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\fnmatch.c
+echo WinRel\fnmatch.obj >>link.rel
+cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\pathstuff.c
+echo WinRel\pathstuff.obj >>link.rel
+echo off
+echo "Linking WinRel/%make%.exe"
+rem link.exe kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /MACHINE:I386 /OUT:.\WinRel/%make%.exe .\WinRel/variable.obj  .\WinRel/rule.obj  .\WinRel/remote-stub.obj  .\WinRel/commands.obj  .\WinRel/file.obj  .\WinRel/getloadavg.obj  .\WinRel/default.obj  .\WinRel/signame.obj  .\WinRel/expand.obj  .\WinRel/dir.obj  .\WinRel/main.obj  .\WinRel/getopt1.obj  .\WinRel/job.obj  .\WinRel/read.obj  .\WinRel/version.obj  .\WinRel/getopt.obj  .\WinRel/arscan.obj  .\WinRel/remake.obj  .\WinRel/misc.obj  .\WinRel/ar.obj  .\WinRel/function.obj  .\WinRel/vpath.obj  .\WinRel/implicit.obj  .\WinRel/dirent.obj  .\WinRel/glob.obj  .\WinRel/fnmatch.obj  .\WinRel/pathstuff.obj
+echo kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib >>link.rel
+link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /MACHINE:I386 /OUT:.\WinRel/%make%.exe @link.rel
+if not exist .\WinRel/%make%.exe echo "WinRel build failed"
+if exist .\WinRel/%make%.exe echo "WinRel build succeeded!"
+echo on

commands.c

@@ -1,5 +1,5 @@
 /* Command processing for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+Copyright (C) 1988,89,91,92,93,94,95,96,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,16 +14,17 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 #include "dep.h"
-#include "commands.h"
-#include "file.h"
+#include "filedef.h"
 #include "variable.h"
 #include "job.h"
+#include "commands.h"
 
-extern int remote_kill ();
+extern int remote_kill PARAMS ((int id, int sig));
 
 #ifndef	HAVE_UNISTD_H
 extern int getpid ();
@@ -87,7 +88,7 @@ set_file_variables (file)
       for (d = enter_file (".SUFFIXES")->deps; d != 0; d = d->next)
 	{
 	  unsigned int slen = strlen (dep_name (d));
-	  if (len > slen && !strncmp (dep_name (d), name + (len - slen), slen))
+	  if (len > slen && strneq (dep_name (d), name + (len - slen), slen))
 	    {
 	      file->stem = savestring (name, len - slen);
 	      break;
@@ -154,8 +155,11 @@ set_file_variables (file)
 
 	bcopy (c, cp, len);
 	cp += len;
+#if VMS
+        *cp++ = ',';
+#else
 	*cp++ = ' ';
-
+#endif
 	if (! d->changed)
 	  qmark_len -= len + 1;	/* Don't space in $? for this one.  */
       }
@@ -193,13 +197,20 @@ set_file_variables (file)
 
 	bcopy (c, cp, len);
 	cp += len;
+#if VMS
+	*cp++ = ',';
+#else
 	*cp++ = ' ';
-
+#endif
 	if (d->changed)
 	  {
 	    bcopy (c, qp, len);
 	    qp += len;
+#if VMS
+	    *qp++ = ',';
+#else
 	    *qp++ = ' ';
+#endif
 	  }
       }
 
@@ -333,6 +344,7 @@ execute_file_commands (file)
       /* We are all out of commands.
 	 If we have gotten this far, all the previous commands
 	 have run successfully, so we have winning update status.  */
+      set_command_state (file, cs_running);
       file->update_status = 0;
       notice_finished_file (file);
       return;
@@ -359,10 +371,25 @@ RETSIGTYPE
 fatal_error_signal (sig)
      int sig;
 {
-#ifdef	__MSDOS__
+#ifdef __MSDOS__
+  extern int dos_status, dos_command_running;
+
+  if (dos_command_running)
+    {
+      /* That was the child who got the signal, not us.  */
+      dos_status |= (sig << 8);
+      return;
+    }
   remove_intermediates (1);
-  exit (1);
-#else	/* Not MSDOS.  */
+  exit (EXIT_FAILURE);
+#else /* not __MSDOS__ */
+#ifdef _AMIGA
+  remove_intermediates (1);
+  if (sig == SIGINT)
+     fputs (_("*** Break.\n"), stderr);
+
+  exit (10);
+#else /* not Amiga */
   handling_fatal_signal = 1;
 
   /* Set the handling for this signal to the default.
@@ -383,7 +410,14 @@ fatal_error_signal (sig)
   /* If we got a signal that means the user
      wanted to kill make, remove pending targets.  */
 
-  if (sig == SIGTERM || sig == SIGINT || sig == SIGHUP || sig == SIGQUIT)
+  if (sig == SIGTERM || sig == SIGINT
+#ifdef SIGHUP
+    || sig == SIGHUP
+#endif
+#ifdef SIGQUIT
+    || sig == SIGQUIT
+#endif
+    )
     {
       register struct child *c;
 
@@ -410,16 +444,19 @@ fatal_error_signal (sig)
 
   remove_intermediates (1);
 
+#ifdef SIGQUIT
   if (sig == SIGQUIT)
     /* We don't want to send ourselves SIGQUIT, because it will
        cause a core dump.  Just exit instead.  */
-    exit (1);
+    exit (EXIT_FAILURE);
+#endif
 
   /* Signal the same code; this time it will really be fatal.  The signal
      will be unblocked when we return and arrive then to kill us.  */
   if (kill (getpid (), sig) < 0)
     pfatal_with_name ("kill");
-#endif	/* MSDOS.  */
+#endif /* not Amiga */
+#endif /* not __MSDOS__  */
 }
 
 /* Delete FILE unless it's precious or not actually a file (phony),
@@ -438,32 +475,33 @@ delete_target (file, on_behalf_of)
 #ifndef NO_ARCHIVES
   if (ar_name (file->name))
     {
-      if (ar_member_date (file->name) != file->last_mtime)
+      if (ar_member_date (file->name) != FILE_TIMESTAMP_S (file->last_mtime))
 	{
 	  if (on_behalf_of)
-	    error ("*** [%s] Archive member `%s' may be bogus; not deleted",
+	    error (NILF, _("*** [%s] Archive member `%s' may be bogus; not deleted"),
 		   on_behalf_of, file->name);
 	  else
-	    error ("*** Archive member `%s' may be bogus; not deleted",
+	    error (NILF, _("*** Archive member `%s' may be bogus; not deleted"),
 		   file->name);
 	}
       return;
     }
 #endif
 
-  if (safe_stat (file->name, &st) == 0
+  if (stat (file->name, &st) == 0
       && S_ISREG (st.st_mode)
-      && (time_t) st.st_mtime != file->last_mtime)
+      && FILE_TIMESTAMP_STAT_MODTIME (st) != file->last_mtime)
     {
       if (on_behalf_of)
-	error ("*** [%s] Deleting file `%s'", on_behalf_of, file->name);
+	error (NILF, _("*** [%s] Deleting file `%s'"), on_behalf_of, file->name);
       else
-	error ("*** Deleting file `%s'", file->name);
-      if (unlink (file->name) < 0)
+	error (NILF, _("*** Deleting file `%s'"), file->name);
+      if (unlink (file->name) < 0
+	  && errno != ENOENT)	/* It disappeared; so what.  */
 	perror_with_name ("unlink: ", file->name);
     }
 }
-     
+
 
 /* Delete all non-precious targets of CHILD unless they were already deleted.
    Set the flag in CHILD to say they've been deleted.  */
@@ -495,12 +533,13 @@ print_commands (cmds)
 {
   register char *s;
 
-  fputs ("#  commands to execute", stdout);
+  fputs (_("#  commands to execute"), stdout);
 
-  if (cmds->filename == 0)
-    puts (" (built-in):");
+  if (cmds->fileinfo.filenm == 0)
+    puts (_(" (built-in):"));
   else
-    printf (" (from `%s', line %u):\n", cmds->filename, cmds->lineno);
+    printf (_(" (from `%s', line %lu):\n"),
+            cmds->fileinfo.filenm, cmds->fileinfo.lineno);
 
   s = cmds->commands;
   while (*s != '\0')

commands.h

@@ -14,15 +14,15 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 /* Structure that gives the commands to make a file
    and information about where these commands came from.  */
 
 struct commands
   {
-    char *filename;		/* File that contains commands.  */
-    unsigned int lineno;	/* Line number in file.  */
+    struct floc fileinfo;	/* Where commands were defined.  */
     char *commands;		/* Commands text.  */
     unsigned int ncommand_lines;/* Number of command lines.  */
     char **command_lines;	/* Commands chopped up into lines.  */
@@ -36,7 +36,7 @@ struct commands
 #define	COMMANDS_SILENT		2 /* Silent: @.  */
 #define	COMMANDS_NOERROR	4 /* No errors: -.  */
 
-extern void execute_file_commands ();
-extern void print_commands ();
-extern void delete_child_targets ();
-extern void chop_commands ();
+extern void execute_file_commands PARAMS ((struct file *file));
+extern void print_commands PARAMS ((struct commands *cmds));
+extern void delete_child_targets PARAMS ((struct child *child));
+extern void chop_commands PARAMS ((struct commands *cmds));

config.ami.template

@@ -0,0 +1,313 @@
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.	*/
+#ifndef _ALL_SOURCE
+/* #undef _ALL_SOURCE */
+#endif
+
+/* Define if using alloca.c.  */
+#define C_ALLOCA
+
+/* Define if the closedir function returns void instead of int.  */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+/* #undef DGUX */
+
+/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#define gid_t int
+
+/* Define if you have alloca, as a function or macro.  */
+/* #undef HAVE_ALLOCA */
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define if you don't have vprintf but do have _doprnt.  */
+/* #undef HAVE_DOPRNT */
+
+/* Define if your system has a working fnmatch function.  */
+/* #undef HAVE_FNMATCH */
+
+/* Define if your system has its own `getloadavg' function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the getmntent function.  */
+/* #undef HAVE_GETMNTENT */
+
+/* Define if the `long double' type works.  */
+/* #undef HAVE_LONG_DOUBLE */
+
+/* Define if you support file names longer than 14 characters.	*/
+#define HAVE_LONG_FILE_NAMES 1
+
+/* Define if you have a working `mmap' system call.  */
+/* #undef HAVE_MMAP */
+
+/* Define if system calls automatically restart after interruption
+   by a signal.  */
+/* #undef HAVE_RESTARTABLE_SYSCALLS */
+
+/* Define if your struct stat has st_blksize.  */
+/* #undef HAVE_ST_BLKSIZE */
+
+/* Define if your struct stat has st_blocks.  */
+/* #undef HAVE_ST_BLOCKS */
+
+/* Define if you have the strcoll function and it is properly defined.	*/
+#define HAVE_STRCOLL 1
+
+/* Define if your struct stat has st_rdev.  */
+#define HAVE_ST_RDEV 1
+
+/* Define if you have the strftime function.  */
+#define HAVE_STRFTIME 1
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.	*/
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if your struct tm has tm_zone.  */
+/* #undef HAVE_TM_ZONE */
+
+/* Define if you don't have tm_zone but do have the external array
+   tzname.  */
+#define HAVE_TZNAME 1
+
+/* Define if you have <unistd.h>.  */
+#define HAVE_UNISTD_H 1
+
+/* Define if utime(file, NULL) sets file's timestamp to the present.  */
+/* #undef HAVE_UTIME_NULL */
+
+/* Define if you have <vfork.h>.  */
+/* #undef HAVE_VFORK_H */
+
+/* Define if you have the vprintf function.  */
+#define HAVE_VPRINTF 1
+
+/* Define if you have the wait3 system call.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if on MINIX.	*/
+/* #undef _MINIX */
+
+/* Define if your struct nlist has an n_un member.  */
+/* #undef NLIST_NAME_UNION */
+
+/* Define if you have <nlist.h>.  */
+/* #undef NLIST_STRUCT */
+
+/* Define if your C compiler doesn't accept -c and -o together.  */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#define pid_t int
+
+/* Define if the system does not provide POSIX.1 features except
+   with this defined.  */
+/* #undef _POSIX_1_SOURCE */
+
+/* Define if you need to in order for stat and other things to work.  */
+/* #undef _POSIX_SOURCE */
+
+/* Define as the return type of signal handlers (int or void).  */
+#define RETSIGTYPE void
+
+/* Define if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#define STACK_DIRECTION -1
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define if you have the ANSI C header files.	*/
+#define STDC_HEADERS
+
+/* Define on System V Release 4.  */
+/* #undef SVR4 */
+
+/* Define if `sys_siglist' is declared by <signal.h>.  */
+/* #undef SYS_SIGLIST_DECLARED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#define uid_t int
+
+/* Define for Encore UMAX.  */
+/* #undef UMAX */
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+/* #undef UMAX4_3 */
+
+/* Define vfork as fork if vfork does not work.  */
+/* #undef vfork */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "%PACKAGE%"
+
+/* Version of this package (needed by automake) */
+#define VERSION "%VERSION%"
+
+/* Define to the name of the SCCS `get' command.  */
+#define SCCS_GET "get"
+
+/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define this to enable job server support in GNU make.  */
+/* #undef MAKE_JOBSERVER */
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+/* #undef ST_MTIM_NSEC */
+
+/* Define this if the C library defines the variable `sys_siglist'.  */
+/* #undef HAVE_SYS_SIGLIST */
+
+/* Define this if the C library defines the variable `_sys_siglist'.  */
+/* #undef HAVE__SYS_SIGLIST */
+
+/* Define this if you have the `union wait' type in <sys/wait.h>.  */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define if you have the dup2 function.  */
+/* #undef HAVE_DUP2 */
+
+/* Define if you have the getcwd function.  */
+#define HAVE_GETCWD 1
+
+/* Define if you have the getgroups function.  */
+/* #undef HAVE_GETGROUPS */
+
+/* Define if you have the gethostbyname function.  */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define if you have the gethostname function.  */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define if you have the memmove function.  */
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the mktemp function.  */
+#define HAVE_MKTEMP 1
+
+/* Define if you have the psignal function.  */
+/* #undef HAVE_PSIGNAL */
+
+/* Define if you have the pstat_getdynamic function.  */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define if you have the setegid function.  */
+/* #undef HAVE_SETEGID */
+
+/* Define if you have the seteuid function.  */
+/* #undef HAVE_SETEUID */
+
+/* Define if you have the setlinebuf function.	*/
+/* #undef HAVE_SETLINEBUF */
+
+/* Define if you have the setregid function.  */
+/* #undef HAVE_SETREGID */
+
+/* Define if you have the setreuid function.  */
+/* #undef HAVE_SETREUID */
+
+/* Define if you have the sigsetmask function.	*/
+/* #undef HAVE_SIGSETMASK */
+
+/* Define if you have the socket function.  */
+/* #undef HAVE_SOCKET */
+
+/* Define if you have the strcasecmp function.  */
+/* #undef HAVE_STRCASECMP */
+
+/* Define if you have the strerror function.  */
+#define HAVE_STRERROR 1
+
+/* Define if you have the strsignal function.  */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define if you have the wait3 function.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if you have the waitpid function.  */
+/* #undef HAVE_WAITPID */
+
+/* Define if you have the <dirent.h> header file.  */
+#define HAVE_DIRENT_H 1
+
+/* Define if you have the <fcntl.h> header file.  */
+#define HAVE_FCNTL_H 1
+
+/* Define if you have the <limits.h> header file.  */
+#define HAVE_LIMITS_H 1
+
+/* Define if you have the <mach/mach.h> header file.  */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define if you have the <memory.h> header file.  */
+/* #undef HAVE_MEMORY_H */
+
+/* Define if you have the <ndir.h> header file.  */
+/* #undef HAVE_NDIR_H */
+
+/* Define if you have the <stdlib.h> header file.  */
+/* #undef HAVE_STDLIB_H */
+
+/* Define if you have the <string.h> header file.  */
+#define HAVE_STRING_H 1
+
+/* Define if you have the <sys/dir.h> header file.  */
+#define HAVE_SYS_DIR_H 1
+
+/* Define if you have the <sys/ndir.h> header file.  */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define if you have the <sys/param.h> header file.  */
+/* #undef HAVE_SYS_PARAM_H */
+
+/* Define if you have the <sys/timeb.h> header file.  */
+/* #undef HAVE_SYS_TIMEB_H */
+
+/* Define if you have the <sys/wait.h> header file.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if you have the <unistd.h> header file.  */
+#define HAVE_UNISTD_H 1
+
+/* Define if you have the dgc library (-ldgc).  */
+/* #undef HAVE_LIBDGC */
+
+/* Define if you have the kstat library (-lkstat).  */
+/* #undef HAVE_LIBKSTAT */
+
+/* Define if you have the sun library (-lsun).  */
+/* #undef HAVE_LIBSUN */
+
+/* Define for Case Insensitve behavior */
+#define HAVE_CASE_INSENSITIVE_FS
+
+/* Build host information. */
+#define MAKE_HOST "Amiga"

config.h-vms.template

@@ -0,0 +1,345 @@
+/* config.h-vms. Generated by hand by Klaus Kämpf <kkaempf@progis.de> */
+/* config.h.  Generated automatically by configure.  */
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+/* #undef _ALL_SOURCE */
+#endif
+
+/* Define if using alloca.c.  */
+/* #undef C_ALLOCA */
+
+/* Define if the closedir function returns void instead of int.  */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+/* #undef DGUX */
+
+/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+/* #undef gid_t */
+
+/* Define if you have alloca, as a function or macro.  */
+#define HAVE_ALLOCA 1
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define if you don't have vprintf but do have _doprnt.  */
+/* #undef HAVE_DOPRNT */
+
+/* Define if your system has a working fnmatch function.  */
+/* #undef HAVE_FNMATCH */
+
+/* Define if your system has its own `getloadavg' function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the getmntent function.  */
+/* #undef HAVE_GETMNTENT */
+
+/* Define if the `long double' type works.  */
+/* #undef HAVE_LONG_DOUBLE */
+
+/* Define if you support file names longer than 14 characters.  */
+#define HAVE_LONG_FILE_NAMES 1
+
+/* Define if you have a working `mmap' system call.  */
+/* #undef HAVE_MMAP */
+
+/* Define if system calls automatically restart after interruption
+   by a signal.  */
+/* #undef HAVE_RESTARTABLE_SYSCALLS */
+
+/* Define if your struct stat has st_blksize.  */
+/* #undef HAVE_ST_BLKSIZE */
+
+/* Define if your struct stat has st_blocks.  */
+/* #undef HAVE_ST_BLOCKS */
+
+/* Define if you have the strcoll function and it is properly defined.  */
+/* #undef HAVE_STRCOLL */
+
+/* Define if your struct stat has st_rdev.  */
+/* #undef HAVE_ST_RDEV */
+
+/* Define if you have the strftime function.  */
+/* #undef HAVE_STRFTIME */
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if your struct tm has tm_zone.  */
+/* #undef HAVE_TM_ZONE */
+
+/* Define if you don't have tm_zone but do have the external array
+   tzname.  */
+/* #undef HAVE_TZNAME */
+
+/* Define if you have <unistd.h>.  */
+#ifdef __DECC
+#define HAVE_UNISTD_H 1
+#endif
+
+/* Define if utime(file, NULL) sets file's timestamp to the present.  */
+/* #undef HAVE_UTIME_NULL */
+
+/* Define if you have <vfork.h>.  */
+/* #undef HAVE_VFORK_H */
+
+/* Define if you have the vprintf function.  */
+#define HAVE_VPRINTF 1
+
+/* Define if you have the wait3 system call.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if on MINIX.  */
+/* #undef _MINIX */
+
+/* Define if your struct nlist has an n_un member.  */
+/* #undef NLIST_NAME_UNION */
+
+/* Define if you have <nlist.h>.  */
+/* #undef NLIST_STRUCT */
+
+/* Define if your C compiler doesn't accept -c and -o together.  */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+/* #undef pid_t */
+
+/* Define if the system does not provide POSIX.1 features except
+   with this defined.  */
+/* #undef _POSIX_1_SOURCE */
+
+#include <sys/types.h>
+#include <ctype.h>
+#include <signal.h>
+
+/* Define if you need to in order for stat and other things to work.  */
+#define _POSIX_C_SOURCE 1
+
+/* Define as the return type of signal handlers (int or void).  */
+#define RETSIGTYPE void
+
+/* Define if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown
+ */
+/* #undef STACK_DIRECTION */
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define if you have the ANSI C header files.  */
+/* #undef STDC_HEADERS */
+
+/* Define on System V Release 4.  */
+/* #undef SVR4 */
+
+/* Define if `sys_siglist' is declared by <signal.h>.  */
+/* #undef SYS_SIGLIST_DECLARED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+/* #undef uid_t */
+
+/* Define for Encore UMAX.  */
+/* #undef UMAX */
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+/* #undef UMAX4_3 */
+
+/* Define vfork as fork if vfork does not work.  */
+/* #undef vfork */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "%PACKAGE%"
+
+/* Version of this package (needed by automake) */
+#define VERSION "%VERSION%"
+
+/* Define to the name of the SCCS `get' command.  */
+/* #undef SCCS_GET */
+
+/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define this to enable job server support in GNU make.  */
+/* #undef MAKE_JOBSERVER */
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+/* #undef ST_MTIM_NSEC */
+
+/* Define this if the C library defines the variable `sys_siglist'.  */
+/* #undefine HAVE_SYS_SIGLIST */
+
+/* Define this if the C library defines the variable `_sys_siglist'.  */
+/* #undef HAVE__SYS_SIGLIST */
+
+/* Define this if you have the `union wait' type in <sys/wait.h>.  */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define if you have the dup2 function.  */
+#define HAVE_DUP2 1
+
+/* Define if you have the getcwd function.  */
+#define HAVE_GETCWD 1
+
+/* Define if you have the getgroups function.  */
+/* #undef HAVE_GETGROUPS */
+
+/* Define if you have the gethostbyname function.  */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define if you have the gethostname function.  */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define if you have the getloadavg function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the memmove function.  */
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the mktemp function.  */
+#define HAVE_MKTEMP 1
+
+/* Define if you have the psignal function.  */
+/* #undef HAVE_PSIGNAL */
+
+/* Define if you have the pstat_getdynamic function.  */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define if you have the setegid function.  */
+/* #undef HAVE_SETEGID */
+
+/* Define if you have the seteuid function.  */
+/* #undef HAVE_SETEUID */
+
+/* Define if you have the setlinebuf function.  */
+/* #undef HAVE_SETLINEBUF */
+
+/* Define if you have the setregid function.  */
+/* #undefine HAVE_SETREGID */
+
+/* Define if you have the setreuid function.  */
+/* #define HAVE_SETREUID */
+
+/* Define if you have the sigsetmask function.  */
+#define HAVE_SIGSETMASK 1
+
+/* Define if you have the socket function.  */
+/* #undef HAVE_SOCKET */
+
+/* Define if you have the strcasecmp function.  */
+/* #undef HAVE_STRCASECMP */
+
+/* Define if you have the strerror function.  */
+#define HAVE_STRERROR 1
+
+/* Define if you have the strsignal function.  */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define if you have the wait3 function.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if you have the waitpid function.  */
+/* #undef HAVE_WAITPID */
+
+/* Define if you have the <dirent.h> header file.  */
+/* #undef HAVE_DIRENT_H */
+
+/* Define if you have the <fcntl.h> header file.  */
+#ifdef __DECC
+#define HAVE_FCNTL_H 1
+#endif
+
+/* Define if you have the <limits.h> header file.  */
+#define HAVE_LIMITS_H 1
+
+/* Define if you have the <mach/mach.h> header file.  */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define if you have the <memory.h> header file.  */
+/* #undef HAVE_MEMORY_H */
+
+/* Define if you have the <ndir.h> header file.  */
+/* #undef HAVE_NDIR_H */
+
+/* Define if you have the <stdlib.h> header file.  */
+#define HAVE_STDLIB_H 1
+
+/* Define if you have the <string.h> header file.  */
+#define HAVE_STRING_H 1
+
+/* Define if you have the <sys/dir.h> header file.  */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define if you have the <sys/ndir.h> header file.  */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define if you have the <sys/param.h> header file.  */
+/* #undef HAVE_SYS_PARAM_H */
+
+/* Define if you have the <sys/timeb.h> header file.  */
+#define HAVE_SYS_TIMEB_H 1
+
+/* Define if you have the <sys/wait.h> header file.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if you have the <unistd.h> header file.  */
+/* #undef HAVE_UNISTD_H */
+
+/* Define if you have the dgc library (-ldgc).  */
+/* #undef HAVE_LIBDGC */
+
+/* Define if you have the kstat library (-lkstat).  */
+/* #undef HAVE_LIBKSTAT */
+
+/* Define if you have the sun library (-lsun).  */
+/* #undef HAVE_LIBSUN */
+
+/* VMS specific */
+
+#define HAVE_VMSDIR_H 1
+#define INCLUDEDIR "sys$sysroot:[syslib]"
+#define LIBDIR "sys$sysroot:[syslib]"
+
+/* Avoid broken RTL functions on OpenVMS */
+#include <unixlib.h>
+#define getopt gnu_getopt
+#define optarg gnu_optarg
+#define optopt gnu_optopt
+#define optind gnu_optind
+#define opterr gnu_opterr
+
+#if defined (__cplusplus) || (defined (__STDC__) && __STDC__)
+#undef  PARAMS
+#define PARAMS(protos)  protos
+#else /* Not C++ or ANSI C.  */
+#undef  PARAMS
+#define PARAMS(protos)  ()
+#endif /* C++ or ANSI C.  */
+
+/* Build host information. */
+#define MAKE_HOST "VMS"

config.h.W32.template

@@ -0,0 +1,374 @@
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+/* #undef _ALL_SOURCE */
+#endif
+
+/* Define if using alloca.c.  */
+/* #undef C_ALLOCA */
+
+/* Define if the closedir function returns void instead of int.  */
+/* #undef CLOSEDIR_VOID */
+
+/* Define to empty if the keyword does not work.  */
+/* #undef const */
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+/* #undef CRAY_STACKSEG_END */
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+/* #undef DGUX */
+
+/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
+/* #undef GETLOADAVG_PRIVILEGED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef gid_t
+#define gid_t int
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+#define HAVE_ALLOCA 1
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+/* #undef HAVE_ALLOCA_H */
+
+/* Define if you don't have vprintf but do have _doprnt.  */
+/* #undef HAVE_DOPRNT */
+
+/* Define if your system has a working fnmatch function.  */
+/* #undef HAVE_FNMATCH */
+
+/* Define if your system has its own `getloadavg' function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the getmntent function.  */
+/* #undef HAVE_GETMNTENT */
+
+/* Define if the `long double' type works.  */
+/* #undef HAVE_LONG_DOUBLE */
+
+/* Define if you support file names longer than 14 characters.  */
+#undef HAVE_LONG_FILE_NAMES
+#define HAVE_LONG_FILE_NAMES 1
+
+/* Define if you have a working `mmap' system call.  */
+/* #undef HAVE_MMAP */
+
+/* Define if system calls automatically restart after interruption
+   by a signal.  */
+/* #undef HAVE_RESTARTABLE_SYSCALLS */
+
+/* Define if your struct stat has st_blksize.  */
+/* #undef HAVE_ST_BLKSIZE */
+
+/* Define if your struct stat has st_blocks.  */
+/* #undef HAVE_ST_BLOCKS */
+
+/* Define if you have the strcoll function and it is properly defined.  */
+#undef HAVE_STRCOLL
+#define HAVE_STRCOLL 1
+
+/* Define if your struct stat has st_rdev.  */
+#undef HAVE_ST_RDEV
+#define HAVE_ST_RDEV 1
+
+/* Define if you have the strftime function.  */
+#undef HAVE_STRFTIME
+#define HAVE_STRFTIME 1
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if your struct tm has tm_zone.  */
+/* #undef HAVE_TM_ZONE */
+
+/* Define if you don't have tm_zone but do have the external array
+   tzname.  */
+#undef HAVE_TZNAME
+#define HAVE_TZNAME 1
+
+/* Define if you have <unistd.h>.  */
+/* #undef HAVE_UNISTD_H */
+
+/* Define if utime(file, NULL) sets file's timestamp to the present.  */
+#undef HAVE_UTIME_NULL
+#define HAVE_UTIME_NULL 1
+
+/* Define if you have <vfork.h>.  */
+/* #undef HAVE_VFORK_H */
+
+/* Define if you have the vprintf function.  */
+#undef HAVE_VPRINTF
+#define HAVE_VPRINTF 1
+
+/* Define if you have the wait3 system call.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if on MINIX.  */
+/* #undef _MINIX */
+
+/* Define if your struct nlist has an n_un member.  */
+/* #undef NLIST_NAME_UNION */
+
+/* Define if you have <nlist.h>.  */
+/* #undef NLIST_STRUCT */
+
+/* Define if your C compiler doesn't accept -c and -o together.  */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef pid_t
+#define pid_t int
+
+/* Define if the system does not provide POSIX.1 features except
+   with this defined.  */
+/* #undef _POSIX_1_SOURCE */
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+#define _POSIX_SOURCE 1
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+#define RETSIGTYPE void
+
+/* Define if the setvbuf function takes the buffering type as its second
+   argument and the buffer pointer as the third, as on System V
+   before release 3.  */
+/* #undef SETVBUF_REVERSED */
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown
+ */
+/* #undef STACK_DIRECTION */
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
+/* #undef STAT_MACROS_BROKEN */
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+#define STDC_HEADERS 1
+
+/* Define on System V Release 4.  */
+/* #undef SVR4 */
+
+/* Define if `sys_siglist' is declared by <signal.h>.  */
+/* #undef SYS_SIGLIST_DECLARED */
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef uid_t
+#define uid_t int
+
+/* Define for Encore UMAX.  */
+/* #undef UMAX */
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+/* #undef UMAX4_3 */
+
+/* Define vfork as fork if vfork does not work.  */
+/* #undef vfork */
+
+/* Name of this package (needed by automake) */
+#define PACKAGE "%PACKAGE%"
+
+/* Version of this package (needed by automake) */
+#define VERSION "%VERSION%"
+
+/* Define to the name of the SCCS `get' command.  */
+#undef SCCS_GET
+#define SCCS_GET "echo no sccs get"
+
+/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
+/* #undef SCCS_GET_MINUS_G */
+
+/* Define this to enable job server support in GNU make.  */
+/* #undef MAKE_JOBSERVER */
+
+/* Define to be the nanoseconds member of struct stat's st_mtim,
+   if it exists.  */
+/* #undef ST_MTIM_NSEC */
+
+/* Define this if the C library defines the variable `sys_siglist'.  */
+/* #undef HAVE_SYS_SIGLIST */
+
+/* Define this if the C library defines the variable `_sys_siglist'.  */
+/* #undef HAVE__SYS_SIGLIST */
+
+/* Define this if you have the `union wait' type in <sys/wait.h>.  */
+/* #undef HAVE_UNION_WAIT */
+
+/* Define if you have the dup2 function.  */
+#undef HAVE_DUP2
+#define HAVE_DUP2 1
+
+/* Define if you have the getcwd function.  */
+#undef HAVE_GETCWD
+#define HAVE_GETCWD 1
+
+/* Define if you have the getgroups function.  */
+/* #undef HAVE_GETGROUPS */
+
+/* Define if you have the gethostbyname function.  */
+/* #undef HAVE_GETHOSTBYNAME */
+
+/* Define if you have the gethostname function.  */
+/* #undef HAVE_GETHOSTNAME */
+
+/* Define if you have the getloadavg function.  */
+/* #undef HAVE_GETLOADAVG */
+
+/* Define if you have the memmove function.  */
+#undef HAVE_MEMMOVE
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the mktemp function.  */
+#undef HAVE_MKTEMP
+#define HAVE_MKTEMP 1
+
+/* Define if you have the psignal function.  */
+/* #undef HAVE_PSIGNAL */
+
+/* Define if you have the pstat_getdynamic function.  */
+/* #undef HAVE_PSTAT_GETDYNAMIC */
+
+/* Define if you have the setegid function.  */
+/* #undef HAVE_SETEGID */
+
+/* Define if you have the seteuid function.  */
+/* #undef HAVE_SETEUID */
+
+/* Define if you have the setlinebuf function.  */
+/* #undef HAVE_SETLINEBUF */
+
+/* Define if you have the setregid function.  */
+/* #undef HAVE_SETREGID */
+
+/* Define if you have the setreuid function.  */
+/* #undef HAVE_SETREUID */
+
+/* Define if you have the sigsetmask function.  */
+/* #undef HAVE_SIGSETMASK */
+
+/* Define if you have the socket function.  */
+/* #undef HAVE_SOCKET */
+
+/* Define if you have the strcasecmp function.  */
+/* #undef HAVE_STRCASECMP */
+
+/* Define if you have the strerror function.  */
+#undef HAVE_STRERROR
+#define HAVE_STRERROR 1
+
+/* Define if you have the strsignal function.  */
+/* #undef HAVE_STRSIGNAL */
+
+/* Define if you have the wait3 function.  */
+/* #undef HAVE_WAIT3 */
+
+/* Define if you have the waitpid function.  */
+/* #undef HAVE_WAITPID */
+
+/* Define if you have the <dirent.h> header file.  */
+#undef HAVE_DIRENT_H
+#define HAVE_DIRENT_H 1
+
+/* Define if you have the <fcntl.h> header file.  */
+#undef HAVE_FCNTL_H
+#define HAVE_FCNTL_H 1
+
+/* Define if you have the <limits.h> header file.  */
+#undef HAVE_LIMITS_H
+#define HAVE_LIMITS_H 1
+
+/* Define if you have the <mach/mach.h> header file.  */
+/* #undef HAVE_MACH_MACH_H */
+
+/* Define if you have the <memory.h> header file.  */
+#undef HAVE_MEMORY_H
+#define HAVE_MEMORY_H 1
+
+/* Define if you have the <ndir.h> header file.  */
+/* #undef HAVE_NDIR_H */
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+#define HAVE_STRING_H 1
+
+/* Define if you have the <sys/dir.h> header file.  */
+/* #undef HAVE_SYS_DIR_H */
+
+/* Define if you have the <sys/ndir.h> header file.  */
+/* #undef HAVE_SYS_NDIR_H */
+
+/* Define if you have the <sys/param.h> header file.  */
+/* #undef HAVE_SYS_PARAM_H */
+
+/* Define if you have the <sys/timeb.h> header file.  */
+#undef HAVE_SYS_TIMEB_H
+#define HAVE_SYS_TIMEB_H 1
+
+/* Define if you have the <sys/wait.h> header file.  */
+/* #undef HAVE_SYS_WAIT_H */
+
+/* Define if you have the <unistd.h> header file.  */
+/* #undef HAVE_UNISTD_H */
+
+/* Define if you have the dgc library (-ldgc).  */
+/* #undef HAVE_LIBDGC */
+
+/* Define if you have the kstat library (-lkstat).  */
+/* #undef HAVE_LIBKSTAT */
+
+/* Define if you have the sun library (-lsun).  */
+/* #undef HAVE_LIBSUN */
+
+/* Build host information. */
+#define MAKE_HOST "Windows32"
+
+/*
+ * Refer to README.W32 for info on the following settings
+ */
+
+/*
+ * If you have a shell that does not grok 'sh -c quoted-command-line'
+ * correctly, you need this setting. Please see below for specific
+ * shell support.
+ */
+#undef BATCH_MODE_ONLY_SHELL
+#define BATCH_MODE_ONLY_SHELL 1
+
+/*
+ * Define if you have the Cygnus "Cygwin" GNU Windows32 tool set.
+ * Do NOT define BATCH_MODE_ONLY_SHELL if you define HAVE_CYGWIN_SHELL
+ */
+#undef HAVE_CYGWIN_SHELL
+
+/*
+ * Define if you have the MKS tool set or shell. Do NOT define
+ * BATCH_MODE_ONLY_SHELL if you define HAVE_MKS_SHELL
+ */
+#undef HAVE_MKS_SHELL
+
+/*
+ * Enforce the mutual exclusivity restriction.
+ */
+#ifdef HAVE_MKS_SHELL
+#undef BATCH_MODE_ONLY_SHELL
+#endif
+
+#ifdef HAVE_CYGWIN_SHELL
+#undef BATCH_MODE_ONLY_SHELL
+#endif
+
+/* Define if you prefer Case Insensitive behavior */
+#undef HAVE_CASE_INSENSITIVE_FS

configh.dos.template

@@ -1,65 +1,52 @@
-/* Generated automatically from configure.in by autoheader.  DO NOT EDIT!  */
 
-#define INCLUDEDIR "c:/djgpp/include"
-#define LIBDIR "c:/djgpp/lib"
+/* Many things are defined already by a system header.  */
+#include <sys/config.h>
 
-/* Define if you have dirent.h.  */
-#define DIRENT
+/* Name of this package (needed by automake) */
+#define PACKAGE "%PACKAGE%"
 
-/* Define if you have the strcoll function and it is properly defined.  */
-#define HAVE_STRCOLL
+/* Version of this package (needed by automake) */
+#define VERSION "%VERSION%"
 
-/* Define if you have unistd.h.  */
-#define HAVE_UNISTD_H
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS
+#if __DJGPP__ > 2 || __DJGPP_MINOR__ > 1
 
 /* Define if `sys_siglist' is declared by <signal.h>.  */
-#define SYS_SIGLIST_DECLARED
+# define SYS_SIGLIST_DECLARED 1
 
-/* Define if you have getdtablesize.  */
-#define HAVE_GETDTABLESIZE
+/* Define this if the C library defines the variable `_sys_siglist'.  */
+# define HAVE_SYS_SIGLIST 1
 
-/* Define if you have dup2.  */
-#define HAVE_DUP2
+#else
 
-/* Define if you have sys_siglist.  */
-#undef HAVE_SYS_SIGLIST
+/* Define NSIG.  */
+# define NSIG SIGMAX
 
-/* Define if you have _sys_siglist.  */
-#undef HAVE__SYS_SIGLIST
-
-/* Define if you have psignal.  */
-#define HAVE_PSIGNAL
-
-/* Define if you have getcwd.  */
-#define HAVE_GETCWD
+#endif
 
 /* Define if you have sigsetmask.  */
-#define HAVE_SIGSETMASK
-
-/* Define if you have setlinebuf.  */
-#define HAVE_SETLINEBUF
-
-/* Define if you have the <limits.h> header file.  */
-#define HAVE_LIMITS_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#define HAVE_SYS_PARAM_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H
+#define HAVE_SIGSETMASK 1
 
 /* Define if you have the <memory.h> header file.  */
-#define HAVE_MEMORY_H
+#define HAVE_MEMORY_H 1
+
+/* Define if you have the memmove function.  */
+#define HAVE_MEMMOVE 1
 
-#define INCLUDEDIR "c:/djgpp/include"
-#define LIBDIR "c:/djgpp/lib"
 #define SCCS_GET "get"
+
+/* Define to `unsigned long' or `unsigned long long'
+   if <inttypes.h> doesn't define.  */
+#define uintmax_t unsigned long long
+
+/* Define the type of the first arg to select().  */
+#define fd_set_size_t int
+
+/* Define if you have the select function.  */
+#define HAVE_SELECT 1
+
+/* Define if you have the vprintf library function.  */
+#undef HAVE_VPRINTF
+#define HAVE_VPRINTF 1
+
+/* Build host information. */
+#define MAKE_HOST "i386-pc-msdosdjgpp"

configure.bat

@@ -1,43 +1,44 @@
 @echo off
-echo Configuring MAKE for go32
-rem This batch file assumes a unix-type "sed" program
+echo Configuring MAKE for DJGPP
 
-update configh.dos config.h
+rem The SmallEnv trick protects against too small environment block,
+rem in which case the values will be truncated and the whole thing
+rem goes awry.  COMMAND.COM will say "Out of environment space", but
+rem many people don't care, so we force them to care by refusing to go.
 
-echo # Makefile generated by "configure.bat"> Makefile
+rem Where is the srcdir?
+set XSRC=.
+if not "%XSRC%"=="." goto SmallEnv
+if "%1%"=="" goto SrcDone
+set XSRC=%1
+if not "%XSRC%"=="%1" goto SmallEnv
 
-if exist config.sed del config.sed
+:SrcDone
 
-echo ": try_sl						">> config.sed
-echo "/\\$/ {						">> config.sed
-echo "  N						">> config.sed
-echo "  s/[ 	]*\\\n[ 	]*/ /			">> config.sed
-echo "  b try_sl					">> config.sed
-echo "}							">> config.sed
+update %XSRC%/configh.dos ./config.h
 
-echo "s/@srcdir@/./					">> config.sed
-echo "s/@CC@/gcc/					">> config.sed
-echo "s/@CFLAGS@/-O2 -g -DHAVE_CONFIG_H/		">> config.sed
-echo "s/@LDFLAGS@//					">> config.sed
-echo "s/@RANLIB@/ranlib/				">> config.sed
-echo "s/@DEFS@//					">> config.sed
-echo "s/@REMOTE@/stub/					">> config.sed
-echo "s/@ALLOCA@//					">> config.sed
-echo "s/@LIBS@//					">> config.sed
-echo "s/@LIBOBJS@//					">> config.sed
-echo "s/@SET_MAKE@//					">> config.sed
-echo "s/^Makefile *:/_Makefile:/			">> config.sed
-echo "s/^config.h *:/_config.h:/			">> config.sed
-echo "s/^defines *=.*$/defines =/			">> config.sed
-echo "/mv -f make.new make/d				">> config.sed
+rem Do they have Make?
+redir -o junk.$$$ -eo make -n -f NUL
+rem REDIR will return 1 if it cannot run Make.
+rem If it can run Make, it will usually return 2,
+rem but 0 is also OK with us.
+if errorlevel 2 goto MakeOk
+if not errorlevel 1 goto MakeOk
+if exist junk.$$$ del junk.$$$
+echo No Make program found--use DOSBUILD.BAT to build Make.
+goto End
 
-echo "s/cd glob; $(MAKE)/$(MAKE) -C glob/		">> config.sed
+rem They do have Make.	Generate the Makefile.
 
-sed -e "s/^\"//" -e "s/\"$//" -e "s/[ 	]*$//" config.sed > config2.sed
-sed -f config2.sed Makefile.in >> Makefile
-del config.sed
-del config2.sed
+:MakeOk
+del junk.$$$
+update %XSRC%/Makefile.DOS ./Makefile
+echo Done.
+if not "%XSRC%"=="." echo Invoke Make thus: "make srcdir=%XSRC%"
+goto End
 
-cd glob
-call configure
-cd ..
+:SmallEnv
+echo Your environment is too small.  Please enlarge it and run me again.
+
+:End
+set XRSC=

configure.in

@@ -1,103 +1,272 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_REVISION([$Id$])
-AC_INIT(vpath.c)		dnl A distinctive file to look for in srcdir.
-AC_CONFIG_HEADER(config.h)
+AC_PREREQ(2.13)dnl		dnl Minimum Autoconf version required.
+AC_INIT(vpath.c)dnl		dnl A distinctive file to look for in srcdir.
 
-# We want these before the checks, so the checks can modify their values.
-test -z "$CFLAGS" && CFLAGS=-g AC_SUBST(CFLAGS)
-test -z "$LDFLAGS" && LDFLAGS=-g AC_SUBST(LDFLAGS)
+AM_INIT_AUTOMAKE(make, 3.78.1)
+AM_CONFIG_HEADER(config.h)
 
-AC_SET_MAKE
+dnl Regular configure stuff
+
+AC_CANONICAL_HOST
+AC_PROG_MAKE_SET
 AC_PROG_CC
 AC_PROG_INSTALL
+AC_CHECK_PROG(AR, ar, ar, ar)
 AC_PROG_RANLIB
 AC_PROG_CPP			dnl Later checks need this.
 AC_AIX
 AC_ISC_POSIX
 AC_MINIX
-AC_STDC_HEADERS
-AC_DIR_HEADER
-AC_UID_T			dnl Also does gid_t.
-AC_GETGROUPS_T
-AC_PID_T
-AC_RETSIGTYPE
-AC_HAVE_HEADERS(unistd.h limits.h sys/param.h fcntl.h string.h memory.h \
-	        sys/timeb.h)
-AC_MINUS_C_MINUS_O
-AC_CONST			dnl getopt needs this.
-AC_STAT_MACROS_BROKEN
+
+AC_CHECK_PROG(PERL, perl, perl, perl)	dnl Needed for the test suite (only)
+
+
+dnl This test must come as early as possible after the compiler configuration
+dnl tests, because the choice of the file model can (in principle) affect
+dnl whether functions and headers are available, whether they work, etc.
+AC_SYS_LARGEFILE
+
+AC_HEADER_STDC
+AC_HEADER_DIRENT
+AC_TYPE_UID_T			dnl Also does gid_t.
+AC_TYPE_PID_T
+AC_TYPE_SIGNAL
+AC_CHECK_HEADERS(stdlib.h unistd.h limits.h sys/param.h fcntl.h string.h \
+		 memory.h sys/timeb.h)
+AC_PROG_CC_C_O
+AM_PROG_CC_STDC
+AC_C_CONST			dnl getopt needs this.
+AC_HEADER_STAT
+
+AC_STRUCT_ST_MTIM_NSEC
+jm_AC_TYPE_UINTMAX_T
 
 AC_SUBST(LIBOBJS)
 
-AC_HAVE_FUNCS(getdtablesize psignal \
-	      dup2 getcwd sigsetmask getgroups setlinebuf \
-	      seteuid setegid setreuid setregid strerror)
-AC_COMPILE_CHECK(sys_siglist, ,
-   [extern char *sys_siglist[]; puts(*sys_siglist);],
-   AC_DEFINE(HAVE_SYS_SIGLIST))
-AC_COMPILE_CHECK(_sys_siglist, ,
-   [extern char *_sys_siglist[]; puts(*_sys_siglist);],
-   AC_DEFINE(HAVE__SYS_SIGLIST))
-AC_ALLOCA
-AC_VFORK
-AC_SETVBUF_REVERSED
-AC_GETLOADAVG
-AC_STRCOLL
+AC_DEFUN(AC_CHECK_SYMBOL, [dnl
+AC_MSG_CHECKING(for $1)
+AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl
+AC_TRY_LINK(, [extern char *sys_siglist[]; puts(*sys_siglist);],
+	    ac_cv_check_symbol_$1=yes, ac_cv_check_symbol_$1=no)])
+if test "$ac_cv_check_symbol_$1" = yes; then
+changequote(,)dnl
+  ac_tr_symbol=`echo $1 | tr '[a-z]' '[A-Z]'`
+changequote([,])dnl
+  AC_DEFINE_UNQUOTED(HAVE_${ac_tr_symbol})
+fi
+AC_MSG_RESULT($ac_cv_check_symbol_$1)])dnl
 
-dnl Check out the wait reality.
-AC_HAVE_HEADERS(sys/wait.h) AC_HAVE_FUNCS(waitpid wait3)
-AC_COMPILE_CHECK(union wait, [#include <sys/types.h>
+# clock_gettime is in -lposix4 in Solaris 2.6.
+AC_CHECK_LIB(posix4, clock_gettime)
+
+AC_CHECK_FUNCS(memmove strdup psignal mktemp pstat_getdynamic \
+	       clock_gettime dup2 getcwd sigsetmask sigaction getgroups \
+	       setlinebuf seteuid setegid setreuid setregid pipe \
+	       strerror strsignal)
+AC_CHECK_SYMBOL(sys_siglist)
+AC_FUNC_ALLOCA
+AC_FUNC_VFORK
+AC_FUNC_VPRINTF
+AC_FUNC_STRCOLL
+AC_FUNC_CLOSEDIR_VOID
+AC_FUNC_SETVBUF_REVERSED
+AC_FUNC_SELECT
+
+AC_CHECK_LIB(kstat, kstat_open) dnl _Must_ come before AC_FUNC_GETLOADAVG.
+AC_FUNC_GETLOADAVG
+
+# Check out the wait reality.
+AC_CHECK_HEADERS(sys/wait.h)
+AC_CHECK_FUNCS(waitpid wait3)
+AC_MSG_CHECKING(for union wait)
+AC_CACHE_VAL(make_cv_union_wait, [dnl
+AC_TRY_LINK([#include <sys/types.h>
 #include <sys/wait.h>],
-	 	 [union wait status; int pid; pid = wait (&status);
+	    [union wait status; int pid; pid = wait (&status);
 #ifdef WEXITSTATUS
 /* Some POSIXoid systems have both the new-style macros and the old
    union wait type, and they do not work together.  If union wait
    conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
 if (WEXITSTATUS (status) != 0) pid = -1;
+#ifdef WTERMSIG
+/* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
+-- blow chunks here --
+#endif
 #endif
 #ifdef HAVE_WAITPID
 /* Make sure union wait works with waitpid.  */
 pid = waitpid (-1, &status, 0);
 #endif
 ],
-		 AC_DEFINE(HAVE_UNION_WAIT))
+	    [make_cv_union_wait=yes], [make_cv_union_wait=no])])
+if test "$make_cv_union_wait" = yes; then
+  AC_DEFINE(HAVE_UNION_WAIT)
+fi
+AC_MSG_RESULT($make_cv_union_wait)
 
-AC_SYS_SIGLIST_DECLARED
+AC_DECL_SYS_SIGLIST
 
 # The presence of the following is not meant to imply
 # that make necessarily works on those systems.
-AC_DYNIX_SEQ
-AC_XENIX_DIR
-AC_IRIX_SUN
+AC_CHECK_LIB(sun, getpwnam)
 
 AC_SUBST(REMOTE) REMOTE=stub
-AC_WITH(customs, [REMOTE=cstms
-LIBS="$LIBS libcustoms.a"])
+make_try_customs=no
+AC_ARG_WITH(customs,
+[  --with-customs=DIR      Enable remote jobs via Customs--see README.customs],
+[case "$withval" in
+  n|no) ;;
+  *) make_cppflags="$CPPFLAGS"
+     case "$withval" in
+       y|ye|yes) ;;
+       *) CPPFLAGS="$CPPFLAGS -I$with_customs/include/customs"
+	  make_ldflags="$LDFLAGS -L$with_customs/lib" ;;
+     esac
+     CF_NETLIBS
+     AC_CHECK_HEADER(customs.h,
+	             REMOTE=cstms
+                       LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags",
+		     with_customs=no
+                       CPPFLAGS="$make_cppflags" make_badcust=yes)
+     ;;
+esac])
 
-echo checking for location of SCCS get command
+dnl See if we can handle the job server feature, and if the user wants it.
+
+AC_ARG_ENABLE(job-server,
+  [  --disable-job-server    Disallow recursive make communication during -jN],
+  [make_cv_job_server="$enableval" user_job_server="$enableval"],
+  [make_cv_job_server="yes"])
+
+has_wait_nohang=yes
+case "$ac_cv_func_waitpid/$ac_cv_func_wait3" in
+  no/no) has_wait_nohang=no ;;
+esac
+
+case "$ac_cv_func_pipe/$ac_cv_func_sigaction/$has_wait_nohang/$make_cv_job_server" in
+  yes/yes/yes/yes) AC_DEFINE(MAKE_JOBSERVER) ;;
+esac
+
+dnl Allow building with dmalloc
+
+AC_ARG_ENABLE(dmalloc,
+  [  --enable-dmalloc        Enable support for the dmalloc debugging library],
+  [make_cv_dmalloc="$enableval"],
+  [make_cv_dmalloc="no"])
+
+case "$make_cv_dmalloc" in
+  yes) AC_CHECK_HEADERS(dmalloc.h)
+       AC_CHECK_LIB(dmalloc, dmalloc_shutdown)
+       CPPFLAGS="$CPPFLAGS -DDMALLOC_FUNC_CHECK" ;;
+esac
+
+AC_CACHE_CHECK(for location of SCCS get command, make_cv_path_sccs_get, [
 if test -f /usr/sccs/get; then
-  SCCS_GET=/usr/sccs/get
-  AC_DEFINE(SCCS_GET, "/usr/sccs/get")
+  make_cv_path_sccs_get=/usr/sccs/get
 else
-  SCCS_GET=get
-  AC_DEFINE(SCCS_GET, "get")
-fi
+  make_cv_path_sccs_get=get
+fi])
+AC_DEFINE_UNQUOTED(SCCS_GET,["$make_cv_path_sccs_get"])
+
 ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
 if ( /usr/sccs/admin -n s.conftest || admin -n s.conftest ) >/dev/null 2>&1 &&
    test -f s.conftest; then
   # We successfully created an SCCS file.
-  echo checking if SCCS get command understands -G
-  if $SCCS_GET -Gconftoast s.conftest >/dev/null 2>&1 &&
-     test -f conftoast; then
-    AC_DEFINE(SCCS_GET_MINUS_G)
-  fi
+  AC_CACHE_CHECK(if SCCS get command understands -G, make_cv_sys_get_minus_G, [
+    if $make_cv_path_sccs_get -Gconftoast s.conftest >/dev/null 2>&1 &&
+       test -f conftoast; then
+       make_cv_sys_get_minus_G=yes
+    else
+       make_cv_sys_get_minus_G=no
+    fi])
+  case "$make_cv_sys_get_minus_G" in
+    yes) AC_DEFINE(SCCS_GET_MINUS_G);;
+  esac
 fi
 rm -f s.conftest conftoast
 
-AC_OUTPUT(Makefile build.sh glob/Makefile, [
-# Makefile uses this timestamp file to know when to remake Makefile,
-# build.sh, and glob/Makefile.
-touch stamp-config])
+AC_MSG_CHECKING(if system libc has GNU glob)
+AC_CACHE_VAL(make_cv_sys_gnu_glob, [
+ AC_TRY_CPP([
+#include <features.h>
+#include <glob.h>
+#include <fnmatch.h>
+
+#define GLOB_INTERFACE_VERSION 1
+#if defined _LIBC || !defined __GNU_LIBRARY__ || __GNU_LIBRARY__ <= 1
+# error no gnu glob
+#else
+# include <gnu-versions.h>
+# if _GNU_GLOB_INTERFACE_VERSION != GLOB_INTERFACE_VERSION
+#  error no gnu glob
+# endif
+#endif
+ ], make_cv_sys_gnu_glob=yes, make_cv_sys_gnu_glob=no)])
+case "$make_cv_sys_gnu_glob" in
+  yes) AC_MSG_RESULT(yes) ;;
+  no)  AC_MSG_RESULT([no; using local copy])
+       CPPFLAGS="$CPPFLAGS -I$srcdir/glob"
+       AC_SUBST(GLOBLIB) GLOBLIB=glob/libglob.a
+       ;;
+esac
+
+AC_DEFINE_UNQUOTED(MAKE_HOST,"$host",[Build host information.])
+MAKE_HOST="$host"
+AC_SUBST(MAKE_HOST)
+
+MAINT_MAKEFILE=/dev/null
+if test -r "$srcdir/maintMakefile"; then
+  MAINT_MAKEFILE="$srcdir/maintMakefile"
+fi
+AC_SUBST_FILE(MAINT_MAKEFILE)
+
+AC_OUTPUT(build.sh Makefile glob/Makefile)
+
+dnl If we don't yet have build.sh.in, build.sh is a bogus 0-length file
+dnl so remove it.
+dnl Can't do this because then remote builds with build.sh don't work.
+dnl test -f build.sh.in || rm -f build.sh
+
+
+case "$make_badcust" in
+  yes) echo
+       echo "WARNING: --with-customs specified but no customs.h could be found;"
+       echo "         disabling Customs support."
+       echo ;;
+esac
+
+case "$with_customs" in
+  ""|n|no|y|ye|yes) ;;
+  *) if test -f "$with_customs/lib/libcustoms.a"; then
+       :
+     else
+       echo
+       echo "WARNING: \`$with_customs/lib' does not appear to contain the"
+       echo "         Customs library.  You must build and install Customs"
+       echo "         before compiling GNU make."
+       echo
+     fi ;;
+esac
+
+case "$has_wait_nohang" in
+  no) echo
+      echo "WARNING: Your system has neither waitpid() nor wait3()."
+      echo "         Without one of these, signal handling is unreliable."
+      echo "         You should be aware that running GNU make with -j"
+      echo "         could result in erratic behavior."
+      echo ;;
+esac
+
+case "$make_cv_job_server/$user_job_server" in
+  no/yes) echo
+	  echo "WARNING: Make job server requires a POSIX-ish system that"
+	  echo "         supports the pipe(), sigaction(), and either"
+          echo "         waitpid() or wait3() functions.  Your system doesn't"
+	  echo "         appear to provide one or more of those."
+	  echo "         Disabling job server support."
+          echo ;;
+esac
 
 dnl Local Variables:
 dnl comment-start: "dnl "

default.c

@@ -1,5 +1,5 @@
 /* Data base of default implicit rules for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,94,95,96 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,12 +14,14 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 #include "rule.h"
 #include "dep.h"
-#include "file.h"
+#include "filedef.h"
+#include "job.h"
 #include "commands.h"
 #include "variable.h"
 
@@ -35,9 +37,15 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
    a `.c' or `.p' or ... file rather than from a .s file.  */
 
 static char default_suffixes[]
-  = ".out .a .ln .o .c .cc .C .p .f .F .r .y .l .s .S \
+#ifdef VMS
+  = ".exe .olb .ln .obj .c .cc .pas .p .for .f .r .y .l .mar \
+.mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
+.w .ch .cweb .web .com .sh .elc .el";
+#else
+  = ".out .a .ln .o .c .cc .C .cpp .p .f .F .r .y .l .s .S \
 .mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
 .w .ch .web .sh .elc .el";
+#endif
 
 static struct pspec default_pattern_rules[] =
   {
@@ -47,9 +55,13 @@ static struct pspec default_pattern_rules[] =
     /* The X.out rules are only in BSD's default set because
        BSD Make has no null-suffix rules, so `foo.out' and
        `foo' are the same thing.  */
+#ifdef VMS
+    { "%.exe", "%",
+        "copy $< $@" },
+#else
     { "%.out", "%",
 	"@rm -f $@ \n cp $< $@" },
-
+#endif
     /* Syntax is "ctangle foo.w foo.ch foo.c".  */
     { "%.c", "%.w %.ch",
 	"$(CTANGLE) $^ $@" },
@@ -61,23 +73,80 @@ static struct pspec default_pattern_rules[] =
 
 static struct pspec default_terminal_rules[] =
   {
+#ifdef VMS
+    /* RCS.  */
+    { "%", "%$$5lv", /* Multinet style */
+        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "[.$$rcs]%$$5lv", /* Multinet style */
+        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "%_v", /* Normal style */
+        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+    { "%", "[.rcs]%_v", /* Normal style */
+        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+
+    /* SCCS.  */
+	/* ain't no SCCS on vms */
+#else
     /* RCS.  */
     { "%", "%,v",
-	"+$(CHECKOUT,v)" },
+	"$(CHECKOUT,v)" },
     { "%", "RCS/%,v",
-	"+$(CHECKOUT,v)" },
+	"$(CHECKOUT,v)" },
+    { "%", "RCS/%",
+	"$(CHECKOUT,v)" },
 
     /* SCCS.  */
     { "%", "s.%",
 	"$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
     { "%", "SCCS/s.%",
 	"$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
-
+#endif /* !VMS */
     { 0, 0, 0 }
   };
 
 static char *default_suffix_rules[] =
   {
+#ifdef VMS
+    ".obj.exe",
+    "$(LINK.obj) $^ $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".mar.exe",
+    "$(LINK.mar) $^ $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".c.exe",
+    "$(COMPILE.c) $^ \n $(LINK.obj) $(subst .c,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".cc.exe",
+    "$(COMPILE.cc) $^ \n $(LINK.obj) $(subst .cc,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".for.exe",
+    "$(COMPILE.for) $^ \n $(LINK.obj) $(subst .for,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+    ".pas.exe",
+    "$(COMPILE.pas) $^ \n $(LINK.obj) $(subst .pas,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
+
+    ".com",
+    "copy $< >$@",
+
+    ".mar.obj",
+    "$(COMPILE.mar) /obj=$@ $<",
+    ".c.obj",
+    "$(COMPILE.c) /obj=$@ $<",
+    ".cc.obj",
+    "$(COMPILE.cc) /obj=$@ $<",
+    ".for.obj",
+    "$(COMPILE.for) /obj=$@ $<",
+    ".pas.obj",
+    "$(COMPILE.pas) /obj=$@ $<",
+
+    ".y.c",
+    "$(YACC.y) $< \n rename y_tab.c $@",
+    ".l.c",
+    "$(LEX.l) $< \n rename lexyy.c $@",
+
+    ".texinfo.info",
+    "$(MAKEINFO) $<",
+
+    ".tex.dvi",
+    "$(TEX) $<",
+
+#else /* ! VMS */
+
     ".o",
     "$(LINK.o) $^ $(LOADLIBES) $(LDLIBS) -o $@",
     ".s",
@@ -90,6 +159,8 @@ static char *default_suffix_rules[] =
     "$(LINK.cc) $^ $(LOADLIBES) $(LDLIBS) -o $@",
     ".C",
     "$(LINK.C) $^ $(LOADLIBES) $(LDLIBS) -o $@",
+    ".cpp",
+    "$(LINK.cpp) $^ $(LOADLIBES) $(LDLIBS) -o $@",
     ".f",
     "$(LINK.f) $^ $(LOADLIBES) $(LDLIBS) -o $@",
     ".p",
@@ -101,38 +172,32 @@ static char *default_suffix_rules[] =
     ".mod",
     "$(COMPILE.mod) -o $@ -e $@ $^",
 
-    ".def.sym", 
+    ".def.sym",
     "$(COMPILE.def) -o $@ $<",
 
     ".sh",
     "cat $< >$@ \n chmod a+x $@",
 
     ".s.o",
-#if !defined(M_XENIX) || defined(__GNUC__)
     "$(COMPILE.s) -o $@ $<",
-#else	/* Xenix.  */
-    "$(COMPILE.s) -o$@ $<",
-#endif	/* Not Xenix.  */
     ".S.o",
-#if !defined(M_XENIX) || defined(__GNUC__)
     "$(COMPILE.S) -o $@ $<",
-#else	/* Xenix.  */
-    "$(COMPILE.S) -o$@ $<",
-#endif	/* Not Xenix.  */
     ".c.o",
-    "$(COMPILE.c) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.c) $(OUTPUT_OPTION) $<",
     ".cc.o",
-    "$(COMPILE.cc) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.cc) $(OUTPUT_OPTION) $<",
     ".C.o",
-    "$(COMPILE.C) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.C) $(OUTPUT_OPTION) $<",
+    ".cpp.o",
+    "$(COMPILE.cpp) $(OUTPUT_OPTION) $<",
     ".f.o",
-    "$(COMPILE.f) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.f) $(OUTPUT_OPTION) $<",
     ".p.o",
-    "$(COMPILE.p) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.p) $(OUTPUT_OPTION) $<",
     ".F.o",
-    "$(COMPILE.F) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.F) $(OUTPUT_OPTION) $<",
     ".r.o",
-    "$(COMPILE.r) $< $(OUTPUT_OPTION)",
+    "$(COMPILE.r) $(OUTPUT_OPTION) $<",
     ".mod.o",
     "$(COMPILE.mod) -o $@ $<",
 
@@ -157,9 +222,9 @@ static char *default_suffix_rules[] =
     "@$(RM) $@ \n $(LEX.l) $< > $@",
 
     ".F.f",
-    "$(PREPROCESS.F) $< $(OUTPUT_OPTION)",
+    "$(PREPROCESS.F) $(OUTPUT_OPTION) $<",
     ".r.f",
-    "$(PREPROCESS.r) $< $(OUTPUT_OPTION)",
+    "$(PREPROCESS.r) $(OUTPUT_OPTION) $<",
 
     /* This might actually make lex.yy.c if there's no %R%
        directive in $*.l, but in that case why were you
@@ -203,19 +268,54 @@ static char *default_suffix_rules[] =
     ".web.tex",
     "$(WEAVE) $<",
 
+#endif /* !VMS */
+
     0, 0,
   };
 
 static char *default_variables[] =
   {
+#ifdef VMS
+    "AR", "library/obj",
+    "ARFLAGS", "/replace",
+    "AS", "macro",
+    "CC", "cc",
+    "C++", "gcc/plus",
+    "CXX", "gcc/plus",
+    "CO", "co",
+    "CPP", "$(CC) /preprocess_only",
+    "FC", "fortran",
+    /* System V uses these, so explicit rules using them should work.
+       However, there is no way to make implicit rules use them and FC.  */
+    "F77", "$(FC)",
+    "F77FLAGS", "$(FFLAGS)",
+    "LD", "link",
+    "LEX", "lex",
+    "PC", "pascal",
+    "YACC", "yacc",	/* Or "bison -y"  */
+    "MAKEINFO", "makeinfo",
+    "TEX", "tex",
+    "TEXINDEX", "texindex",
+
+    "RM", "delete/nolog",
+
+    "LINK.obj", "$(LD) $(LDFLAGS)",
+    "COMPILE.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+    "COMPILE.cc", "$(C++) $(C++FLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
+    "YACC.y", "$(YACC) $(YFLAGS)",
+    "LEX.l", "$(LEX) $(LFLAGS)",
+    "COMPILE.for", "$(FC) $(FFLAGS) $(TARGET_ARCH)",
+    "COMPILE.pas", "$(PC) $(PFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+    "COMPILE.mar", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
+    "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
+
+    "MV", "rename/new_version",
+    "CP", "copy",
+
+#else /* !VMS */
+
     "AR", "ar",
-#ifndef __hpux
     "ARFLAGS", "rv",
-#else
-    /* HPUX ar's f flag says to truncate the file names to archive member
-       name length in comparisons, so replacement notices the equality.  */
-    "ARFLAGS", "rfv",
-#endif
     "AS", "as",
 #ifdef GCC_IS_NATIVE
     "CC", "gcc",
@@ -228,8 +328,8 @@ static char *default_variables[] =
     /* This expands to $(CO) $(COFLAGS) $< $@ if $@ does not exist,
        and to the empty string if $@ does exist.  */
     "CHECKOUT,v",
-    "$(patsubst $@-noexist,$(CO) $(COFLAGS) $< $@,\
-		$(filter-out $@,$(firstword $(wildcard $@) $@-noexist)))",
+    "+$(patsubst $@-noexist,$(CO) $(COFLAGS) $< $@,\
+		 $(filter-out $@,$(firstword $(wildcard $@) $@-noexist)))",
 
     "CO", "co",
     "CPP", "$(CC) -E",
@@ -293,8 +393,10 @@ static char *default_variables[] =
     "LINK.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
     "COMPILE.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
     "COMPILE.C", "$(COMPILE.cc)",
+    "COMPILE.cpp", "$(COMPILE.cc)",
     "LINK.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
     "LINK.C", "$(LINK.cc)",
+    "LINK.cpp", "$(LINK.cc)",
     "YACC.y", "$(YACC) $(YFLAGS)",
     "LEX.l", "$(LEX) $(LFLAGS) -t",
     "COMPILE.f", "$(FC) $(FFLAGS) $(TARGET_ARCH) -c",
@@ -311,27 +413,30 @@ static char *default_variables[] =
     "COMPILE.s", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
     "LINK.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_MACH)",
     "COMPILE.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(TARGET_MACH) -c",
-#if !defined(M_XENIX) || defined(__GNUC__)
     "PREPROCESS.S", "$(CC) -E $(CPPFLAGS)",
-#else	/* Xenix.  */
-    "PREPROCESS.S", "$(CC) -EP $(CPPFLAGS)",
-#endif	/* Not Xenix.  */
     "PREPROCESS.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -F",
     "PREPROCESS.r", "$(FC) $(FFLAGS) $(RFLAGS) $(TARGET_ARCH) -F",
     "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
 
 #ifndef	NO_MINUS_C_MINUS_O
-#if !defined(M_XENIX) || defined(__GNUC__)
     "OUTPUT_OPTION", "-o $@",
-#else	/* Xenix.  */
-    "OUTPUT_OPTION", "-Fo$@",
-#endif	/* Not Xenix.  */
 #endif
 
 #ifdef	SCCS_GET_MINUS_G
     "SCCS_OUTPUT_OPTION", "-G$@",
 #endif
 
+#ifdef _AMIGA
+    ".LIBPATTERNS", "%.lib",
+#else
+#ifdef __MSDOS__
+    ".LIBPATTERNS", "lib%.a $(DJDIR)/lib/lib%.a",
+#else
+    ".LIBPATTERNS", "lib%.so lib%.a",
+#endif
+#endif
+
+#endif /* !VMS */
     0, 0
   };
 
@@ -363,7 +468,7 @@ void
 install_default_suffix_rules ()
 {
   register char **s;
-  
+
   if (no_builtin_rules_flag)
     return;
 
@@ -374,7 +479,7 @@ install_default_suffix_rules ()
       if (f->cmds == 0)
 	{
 	  f->cmds = (struct commands *) xmalloc (sizeof (struct commands));
-	  f->cmds->filename = 0;
+	  f->cmds->fileinfo.filenm = 0;
 	  f->cmds->commands = s[1];
 	  f->cmds->command_lines = 0;
 	}
@@ -388,7 +493,7 @@ void
 install_default_implicit_rules ()
 {
   register struct pspec *p;
-  
+
   if (no_builtin_rules_flag)
     return;
 
@@ -404,6 +509,9 @@ define_default_variables ()
 {
   register char **s;
 
+  if (no_builtin_variables_flag)
+    return;
+
   for (s = default_variables; *s != 0; s += 2)
     (void) define_variable (s[0], strlen (s[0]), s[1], o_default, 1);
 }

dep.h

@@ -1,5 +1,5 @@
 /* Definitions of dependency data structures for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1988, 1989, 1991, 1992, 1993, 1996 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,7 +14,18 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+/* Flag bits for the second argument to `read_makefile'.
+   These flags are saved in the `changed' field of each
+   `struct dep' in the chain returned by `read_all_makefiles'.  */
+
+#define RM_NO_DEFAULT_GOAL	(1 << 0) /* Do not set default goal.  */
+#define RM_INCLUDED		(1 << 1) /* Search makefile search path.  */
+#define RM_DONTCARE		(1 << 2) /* No error if it doesn't exist.  */
+#define RM_NO_TILDE		(1 << 3) /* Don't expand ~ in file name.  */
+#define RM_NOFLAG		0
 
 /* Structure representing one dependency of a file.
    Each struct file's `deps' points to a chain of these,
@@ -40,11 +51,16 @@ struct nameseq
   };
 
 
-extern struct nameseq *multi_glob (), *parse_file_seq ();
-extern char *tilde_expand ();
+extern struct nameseq *multi_glob PARAMS ((struct nameseq *chain, unsigned int size));
+#ifdef VMS
+extern struct nameseq *parse_file_seq ();
+#else
+extern struct nameseq *parse_file_seq PARAMS ((char **stringp, int stopchar, unsigned int size, int strip));
+#endif
+extern char *tilde_expand PARAMS ((char *name));
 
 #ifndef NO_ARCHIVES
-extern struct nameseq *ar_glob ();
+extern struct nameseq *ar_glob PARAMS ((char *arname, char *member_pattern, unsigned int size));
 #endif
 
 #ifndef	iAPX286
@@ -54,13 +70,7 @@ extern struct nameseq *ar_glob ();
 extern char *dep_name ();
 #endif
 
-extern struct dep *read_all_makefiles ();
-
-/* Flag bits for the second argument to `read_makefile'.
-   These flags are saved in the `changed' field of each
-   `struct dep' in the chain returned by `read_all_makefiles'.  */
-#define RM_NO_DEFAULT_GOAL	(1 << 0) /* Do not set default goal.  */
-#define RM_INCLUDED		(1 << 1) /* Search makefile search path.  */
-#define RM_DONTCARE		(1 << 2) /* No error if it doesn't exist.  */
-#define RM_NO_TILDE		(1 << 3) /* Don't expand ~ in file name.  */
-#define RM_NOFLAG		0
+extern struct dep *copy_dep_chain PARAMS ((struct dep *d));
+extern struct dep *read_all_makefiles PARAMS ((char **makefiles));
+extern int update_goal_chain PARAMS ((struct dep *goals, int makefiles));
+extern void uniquize_deps PARAMS ((struct dep *));

dir.c

@@ -1,5 +1,5 @@
 /* Directory hashing for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+Copyright (C) 1988,89,91,92,93,94,95,96,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,41 +14,55 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 
-#if	defined (POSIX) || defined (DIRENT) || defined (__GNU_LIBRARY__)
-#include <dirent.h>
-#ifndef	__GNU_LIBRARY__
-#define D_NAMLEN(d) strlen((d)->d_name)
-#else	/* GNU C library.  */
-#define D_NAMLEN(d) ((d)->d_namlen)
-#endif	/* Not GNU C library.  */
-#else	/* Not POSIX or DIRENT.  */
-#define direct dirent
-#define D_NAMLEN(d) ((d)->d_namlen)
-#ifdef	SYSNDIR
-#include <sys/ndir.h>
-#endif	/* SYSNDIR */
-#ifdef	SYSDIR
-#include <sys/dir.h>
-#endif	/* SYSDIR */
-#ifdef NDIR
-#include <ndir.h>
-#endif	/* NDIR */
-#endif	/* POSIX or DIRENT or __GNU_LIBRARY__.  */
+#ifdef	HAVE_DIRENT_H
+# include <dirent.h>
+# define NAMLEN(dirent) strlen((dirent)->d_name)
+#else
+# define dirent direct
+# define NAMLEN(dirent) (dirent)->d_namlen
+# ifdef HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# ifdef HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# ifdef HAVE_NDIR_H
+#  include <ndir.h>
+# endif
+# ifdef HAVE_VMSDIR_H
+#  include "vmsdir.h"
+# endif /* HAVE_VMSDIR_H */
+#endif
 
-#if defined (POSIX) && !defined (__GNU_LIBRARY__)
+/* In GNU systems, <dirent.h> defines this macro for us.  */
+#ifdef _D_NAMLEN
+#undef NAMLEN
+#define NAMLEN(d) _D_NAMLEN(d)
+#endif
+
+#if (defined (POSIX) || defined (WINDOWS32)) && !defined (__GNU_LIBRARY__)
 /* Posix does not require that the d_ino field be present, and some
    systems do not provide it. */
 #define REAL_DIR_ENTRY(dp) 1
+#define FAKE_DIR_ENTRY(dp)
 #else
 #define REAL_DIR_ENTRY(dp) (dp->d_ino != 0)
+#define FAKE_DIR_ENTRY(dp) (dp->d_ino = 1)
 #endif /* POSIX */
 
 #ifdef __MSDOS__
 #include <ctype.h>
+#include <fcntl.h>
+
+/* If it's MSDOS that doesn't have _USE_LFN, disable LFN support.  */
+#ifndef _USE_LFN
+#define _USE_LFN 0
+#endif
 
 static char *
 dosify (filename)
@@ -58,9 +72,11 @@ dosify (filename)
   char *df;
   int i;
 
-  if (filename == 0)
-    return 0;
+  if (filename == 0 || _USE_LFN)
+    return filename;
 
+  /* FIXME: what about filenames which violate
+     8+3 constraints, like "config.h.in", or ".emacs"?  */
   if (strpbrk (filename, "\"*+,;<=>?[\\]|") != 0)
     return filename;
 
@@ -88,7 +104,105 @@ dosify (filename)
   *df = 0;
   return dos_filename;
 }
+#endif /* __MSDOS__ */
+
+#ifdef WINDOWS32
+#include "pathstuff.h"
 #endif
+
+#ifdef _AMIGA
+#include <ctype.h>
+#endif
+
+#ifdef HAVE_CASE_INSENSITIVE_FS
+static char *
+downcase (filename)
+     char *filename;
+{
+#ifdef _AMIGA
+  static char new_filename[136];
+#else
+  static char new_filename[PATH_MAX];
+#endif
+  char *df;
+  int i;
+
+  if (filename == 0)
+    return 0;
+
+  df = new_filename;
+
+  /* First, transform the name part.  */
+  for (i = 0; *filename != '\0'; ++i)
+  {
+    *df++ = tolower (*filename);
+    ++filename;
+  }
+
+  *df = 0;
+
+  return new_filename;
+}
+#endif /* HAVE_CASE_INSENSITIVE_FS */
+
+#ifdef VMS
+
+static int
+vms_hash (name)
+    char *name;
+{
+  int h = 0;
+  int g;
+
+  while (*name)
+    {
+      h = (h << 4) + *name++;
+      g = h & 0xf0000000;
+      if (g)
+	{
+	  h = h ^ (g >> 24);
+	  h = h ^ g;
+	}
+    }
+  return h;
+}
+
+/* fake stat entry for a directory */
+static int
+vmsstat_dir (name, st)
+    char *name;
+    struct stat *st;
+{
+  char *s;
+  int h;
+  DIR *dir;
+
+  dir = opendir (name);
+  if (dir == 0)
+    return -1;
+  closedir (dir);
+  s = strchr (name, ':');	/* find device */
+  if (s)
+    {
+      *s++ = 0;
+      st->st_dev = (char *)vms_hash (name);
+      h = vms_hash (s);
+      *(s-1) = ':';
+    }
+  else
+    {
+      st->st_dev = 0;
+      s = name;
+      h = vms_hash (s);
+    }
+
+  st->st_ino[0] = h & 0xff;
+  st->st_ino[1] = h & 0xff00;
+  st->st_ino[2] = h >> 16;
+
+  return 0;
+}
+#endif /* VMS */
 
 /* Hash table of directories.  */
 
@@ -100,8 +214,29 @@ struct directory_contents
   {
     struct directory_contents *next;
 
-    int dev, ino;		/* Device and inode numbers of this dir.  */
-
+    dev_t dev;			/* Device and inode numbers of this dir.  */
+#ifdef WINDOWS32
+    /*
+     * Inode means nothing on WINDOWS32. Even file key information is
+     * unreliable because it is random per file open and undefined
+     * for remote filesystems. The most unique attribute I can
+     * come up with is the fully qualified name of the directory. Beware
+     * though, this is also unreliable. I'm open to suggestion on a better
+     * way to emulate inode.
+     */
+    char *path_key;
+    int   mtime;        /* controls check for stale directory cache */
+    int   fs_flags;     /* FS_FAT, FS_NTFS, ... */
+#define FS_FAT      0x1
+#define FS_NTFS     0x2
+#define FS_UNKNOWN  0x4
+#else
+#ifdef VMS
+    ino_t ino[3];
+#else
+    ino_t ino;
+#endif
+#endif /* WINDOWS32 */
     struct dirfile **files;	/* Files in this directory.  */
     DIR *dirstream;		/* Stream reading this directory.  */
   };
@@ -145,7 +280,8 @@ struct dirfile
 #define DIRFILE_BUCKETS 107
 #endif
 
-static int dir_contents_file_exists_p ();
+static int dir_contents_file_exists_p PARAMS ((struct directory_contents *dir, char *filename));
+static struct directory *find_directory PARAMS ((char *name));
 
 /* Find the directory named NAME and return its `struct directory'.  */
 
@@ -156,13 +292,27 @@ find_directory (name)
   register unsigned int hash = 0;
   register char *p;
   register struct directory *dir;
+#ifdef WINDOWS32
+  char* w32_path;
+  char  fs_label[BUFSIZ];
+  char  fs_type[BUFSIZ];
+  long  fs_serno;
+  long  fs_flags;
+  long  fs_len;
+#endif
+#ifdef VMS
+  if ((*name == '.') && (*(name+1) == 0))
+    name = "[]";
+  else
+    name = vmsify (name,1);
+#endif
 
   for (p = name; *p != '\0'; ++p)
-    HASH (hash, *p);
+    HASHI (hash, *p);
   hash %= DIRECTORY_BUCKETS;
 
   for (dir = directories[hash]; dir != 0; dir = dir->next)
-    if (streq (dir->name, name))
+    if (strieq (dir->name, name))
       break;
 
   if (dir == 0)
@@ -179,21 +329,57 @@ find_directory (name)
       /* The directory is not in the name hash table.
 	 Find its device and inode numbers, and look it up by them.  */
 
-      if (safe_stat (name, &st) < 0)
+#ifdef VMS
+      if (vmsstat_dir (name, &st) < 0)
+#else
+
+#ifdef WINDOWS32
+      /* Remove any trailing '\'.  Windows32 stat fails even on valid
+         directories if they end in '\'. */
+      if (p[-1] == '\\')
+        p[-1] = '\0';
+#endif
+      if (stat (name, &st) < 0)
+#endif
+	{
 	/* Couldn't stat the directory.  Mark this by
 	   setting the `contents' member to a nil pointer.  */
-	dir->contents = 0;
+	  dir->contents = 0;
+	}
       else
 	{
 	  /* Search the contents hash table; device and inode are the key.  */
 
 	  struct directory_contents *dc;
 
+#ifdef WINDOWS32
+          w32_path = w32ify(name, 1);
+          hash = ((unsigned int) st.st_dev << 16) | (unsigned int) st.st_ctime;
+#else
+#ifdef VMS
+	hash = ((unsigned int) st.st_dev << 16)
+		| ((unsigned int) st.st_ino[0]
+		+ (unsigned int) st.st_ino[1]
+		+ (unsigned int) st.st_ino[2]);
+#else
 	  hash = ((unsigned int) st.st_dev << 16) | (unsigned int) st.st_ino;
+#endif
+#endif
 	  hash %= DIRECTORY_BUCKETS;
 
 	  for (dc = directories_contents[hash]; dc != 0; dc = dc->next)
-	    if (dc->dev == st.st_dev && dc->ino == st.st_ino)
+#ifdef WINDOWS32
+            if (strieq(dc->path_key, w32_path))
+#else
+	    if (dc->dev == st.st_dev
+#ifdef VMS
+		&& dc->ino[0] == st.st_ino[0]
+		&& dc->ino[1] == st.st_ino[1]
+		&& dc->ino[2] == st.st_ino[2])
+#else
+		 && dc->ino == st.st_ino)
+#endif
+#endif /* WINDOWS32 */
 	      break;
 
 	  if (dc == 0)
@@ -205,15 +391,46 @@ find_directory (name)
 
 	      /* Enter it in the contents hash table.  */
 	      dc->dev = st.st_dev;
+#ifdef WINDOWS32
+              dc->path_key = xstrdup(w32_path);
+              dc->mtime = st.st_mtime;
+
+              /*
+               * NTFS is the only WINDOWS32 filesystem that bumps mtime
+               * on a directory when files are added/deleted from
+               * a directory.
+               */
+              w32_path[3] = '\0';
+              if (GetVolumeInformation(w32_path,
+                     fs_label, sizeof (fs_label),
+                     &fs_serno, &fs_len,
+                     &fs_flags, fs_type, sizeof (fs_type)) == FALSE)
+                dc->fs_flags = FS_UNKNOWN;
+              else if (!strcmp(fs_type, "FAT"))
+                dc->fs_flags = FS_FAT;
+              else if (!strcmp(fs_type, "NTFS"))
+                dc->fs_flags = FS_NTFS;
+              else
+                dc->fs_flags = FS_UNKNOWN;
+#else
+#ifdef VMS
+	      dc->ino[0] = st.st_ino[0];
+	      dc->ino[1] = st.st_ino[1];
+	      dc->ino[2] = st.st_ino[2];
+#else
 	      dc->ino = st.st_ino;
+#endif
+#endif /* WINDOWS32 */
 	      dc->next = directories_contents[hash];
 	      directories_contents[hash] = dc;
 
 	      dc->dirstream = opendir (name);
 	      if (dc->dirstream == 0)
+		{
 		/* Couldn't open the directory.  Mark this by
 		   setting the `files' member to a nil pointer.  */
-		dc->files = 0;
+		  dc->files = 0;
+		}
 	      else
 		{
 		  /* Allocate an array of buckets for files and zero it.  */
@@ -251,21 +468,36 @@ dir_contents_file_exists_p (dir, filename)
   register char *p;
   register struct dirfile *df;
   register struct dirent *d;
+#ifdef WINDOWS32
+  struct stat st;
+  int rehash = 0;
+#endif
 
   if (dir == 0 || dir->files == 0)
+    {
     /* The directory could not be stat'd or opened.  */
-    return 0;
-
+      return 0;
+    }
 #ifdef __MSDOS__
   filename = dosify (filename);
 #endif
 
+#ifdef HAVE_CASE_INSENSITIVE_FS
+  filename = downcase (filename);
+#endif
+
+#ifdef VMS
+  filename = vmsify (filename,0);
+#endif
+
   hash = 0;
   if (filename != 0)
     {
       if (*filename == '\0')
+	{
 	/* Checking if the directory exists.  */
-	return 1;
+	  return 1;
+	}
 
       for (p = filename; *p != '\0'; ++p)
 	HASH (hash, *p);
@@ -274,16 +506,45 @@ dir_contents_file_exists_p (dir, filename)
       /* Search the list of hashed files.  */
 
       for (df = dir->files[hash]; df != 0; df = df->next)
-	if (streq (df->name, filename))
-	  return !df->impossible;
+	{
+	  if (strieq (df->name, filename))
+	    {
+	      return !df->impossible;
+	    }
+	}
     }
 
   /* The file was not found in the hashed list.
      Try to read the directory further.  */
 
   if (dir->dirstream == 0)
+    {
+#ifdef WINDOWS32
+      /*
+       * Check to see if directory has changed since last read. FAT
+       * filesystems force a rehash always as mtime does not change
+       * on directories (ugh!).
+       */
+      if (dir->path_key &&
+          (dir->fs_flags & FS_FAT ||
+           (stat(dir->path_key, &st) == 0 &&
+            st.st_mtime > dir->mtime))) {
+
+        /* reset date stamp to show most recent re-process */
+        dir->mtime = st.st_mtime;
+
+        /* make sure directory can still be opened */
+        dir->dirstream = opendir(dir->path_key);
+
+        if (dir->dirstream)
+          rehash = 1;
+        else
+          return 0; /* couldn't re-read - fail */
+      } else
+#endif
     /* The directory has been all read in.  */
-    return 0;
+      return 0;
+    }
 
   while ((d = readdir (dir->dirstream)) != 0)
     {
@@ -295,24 +556,43 @@ dir_contents_file_exists_p (dir, filename)
       if (!REAL_DIR_ENTRY (d))
 	continue;
 
-      len = D_NAMLEN (d);
-      while (d->d_name[len - 1] == '\0')
-	--len;
-
+      len = NAMLEN (d);
       for (i = 0; i < len; ++i)
-	HASH (newhash, d->d_name[i]);
+	HASHI (newhash, d->d_name[i]);
       newhash %= DIRFILE_BUCKETS;
+#ifdef WINDOWS32
+      /*
+       * If re-reading a directory, check that this file isn't already
+       * in the cache.
+       */
+      if (rehash) {
+        for (df = dir->files[newhash]; df != 0; df = df->next)
+          if (streq(df->name, d->d_name))
+            break;
+      } else
+        df = 0;
+
+      /*
+       * If re-reading a directory, don't cache files that have
+       * already been discovered.
+       */
+      if (!df) {
+#endif
 
       df = (struct dirfile *) xmalloc (sizeof (struct dirfile));
       df->next = dir->files[newhash];
       dir->files[newhash] = df;
       df->name = savestring (d->d_name, len);
       df->impossible = 0;
-
+#ifdef WINDOWS32
+      }
+#endif
       /* Check if the name matches the one we're searching for.  */
       if (filename != 0
-	  && newhash == hash && streq (d->d_name, filename))
-	return 1;
+	  && newhash == hash && strieq (d->d_name, filename))
+	{
+	  return 1;
+	}
     }
 
   /* If the directory has been completely read in,
@@ -323,7 +603,6 @@ dir_contents_file_exists_p (dir, filename)
       closedir (dir->dirstream);
       dir->dirstream = 0;
     }
-
   return 0;
 }
 
@@ -348,20 +627,55 @@ file_exists_p (name)
 {
   char *dirend;
   char *dirname;
+  char *slash;
 
 #ifndef	NO_ARCHIVES
   if (ar_name (name))
     return ar_member_date (name) != (time_t) -1;
 #endif
 
+#ifdef VMS
+  dirend = rindex (name, ']');
+  dirend++;
+  if (dirend == (char *)1)
+    return dir_file_exists_p ("[]", name);
+#else /* !VMS */
   dirend = rindex (name, '/');
+#if defined (WINDOWS32) || defined (__MSDOS__)
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    char *bslash = rindex(name, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && name[0] && name[1] == ':')
+      dirend = name + 1;
+  }
+#endif /* WINDOWS32 || __MSDOS__ */
   if (dirend == 0)
+#ifndef _AMIGA
     return dir_file_exists_p (".", name);
+#else /* !VMS && !AMIGA */
+    return dir_file_exists_p ("", name);
+#endif /* AMIGA */
+#endif /* VMS */
 
-  dirname = (char *) alloca (dirend - name + 1);
-  bcopy (name, dirname, dirend - name);
-  dirname[dirend - name] = '\0';
-  return dir_file_exists_p (dirname, dirend + 1);
+  slash = dirend;
+  if (dirend == name)
+    dirname = "/";
+  else
+    {
+#if defined (WINDOWS32) || defined (__MSDOS__)
+  /* d:/ and d: are *very* different...  */
+      if (dirend < name + 3 && name[1] == ':' &&
+	  (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+	dirend++;
+#endif
+      dirname = (char *) alloca (dirend - name + 1);
+      bcopy (name, dirname, dirend - name);
+      dirname[dirend - name] = '\0';
+    }
+  return dir_file_exists_p (dirname, slash + 1);
 }
 
 /* Mark FILENAME as `impossible' for `file_impossible_p'.
@@ -378,20 +692,55 @@ file_impossible (filename)
   register struct directory *dir;
   register struct dirfile *new;
 
+#ifdef VMS
+  dirend = rindex (p, ']');
+  dirend++;
+  if (dirend == (char *)1)
+    dir = find_directory ("[]");
+#else
   dirend = rindex (p, '/');
+#if defined (WINDOWS32) || defined (__MSDOS__)
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    char *bslash = rindex(p, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && p[0] && p[1] == ':')
+      dirend = p + 1;
+  }
+#endif /* WINDOWS32 or __MSDOS__ */
   if (dirend == 0)
+#ifdef _AMIGA
+    dir = find_directory ("");
+#else /* !VMS && !AMIGA */
     dir = find_directory (".");
+#endif /* AMIGA */
+#endif /* VMS */
   else
     {
-      char *dirname = (char *) alloca (dirend - p + 1);
-      bcopy (p, dirname, dirend - p);
-      dirname[dirend - p] = '\0';
+      char *dirname;
+      char *slash = dirend;
+      if (dirend == p)
+	dirname = "/";
+      else
+	{
+#if defined (WINDOWS32) || defined (__MSDOS__)
+	  /* d:/ and d: are *very* different...  */
+	  if (dirend < p + 3 && p[1] == ':' &&
+	      (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+	    dirend++;
+#endif
+	  dirname = (char *) alloca (dirend - p + 1);
+	  bcopy (p, dirname, dirend - p);
+	  dirname[dirend - p] = '\0';
+	}
       dir = find_directory (dirname);
-      filename = p = dirend + 1;
+      filename = p = slash + 1;
     }
 
   for (hash = 0; *p != '\0'; ++p)
-    HASH (hash, *p);
+    HASHI (hash, *p);
   hash %= DIRFILE_BUCKETS;
 
   if (dir->contents == 0)
@@ -400,7 +749,18 @@ file_impossible (filename)
 	 structure for it, but leave it out of the contents hash table.  */
       dir->contents = (struct directory_contents *)
 	xmalloc (sizeof (struct directory_contents));
+#ifdef WINDOWS32
+      dir->contents->path_key = NULL;
+      dir->contents->mtime = 0;
+#else  /* WINDOWS32 */
+#ifdef VMS
+      dir->contents->dev = 0;
+      dir->contents->ino[0] = dir->contents->ino[1] =
+	dir->contents->ino[2] = 0;
+#else
       dir->contents->dev = dir->contents->ino = 0;
+#endif
+#endif /* WINDOWS32 */
       dir->contents->files = 0;
       dir->contents->dirstream = 0;
     }
@@ -419,7 +779,7 @@ file_impossible (filename)
   new = (struct dirfile *) xmalloc (sizeof (struct dirfile));
   new->next = dir->contents->files[hash];
   dir->contents->files[hash] = new;
-  new->name = savestring (filename, strlen (filename));
+  new->name = xstrdup (filename);
   new->impossible = 1;
 }
 
@@ -435,16 +795,50 @@ file_impossible_p (filename)
   register struct directory_contents *dir;
   register struct dirfile *next;
 
-  dirend = rindex (filename, '/');
+#ifdef VMS
+  dirend = rindex (filename, ']');
   if (dirend == 0)
+    dir = find_directory ("[]")->contents;
+#else
+  dirend = rindex (filename, '/');
+#if defined (WINDOWS32) || defined (__MSDOS__)
+  /* Forward and backslashes might be mixed.  We need the rightmost one.  */
+  {
+    char *bslash = rindex(filename, '\\');
+    if (!dirend || bslash > dirend)
+      dirend = bslash;
+    /* The case of "d:file".  */
+    if (!dirend && filename[0] && filename[1] == ':')
+      dirend = filename + 1;
+  }
+#endif /* WINDOWS32 || __MSDOS__ */
+  if (dirend == 0)
+#ifdef _AMIGA
+    dir = find_directory ("")->contents;
+#else /* !VMS && !AMIGA */
     dir = find_directory (".")->contents;
+#endif /* AMIGA */
+#endif /* VMS */
   else
     {
-      char *dirname = (char *) alloca (dirend - filename + 1);
-      bcopy (p, dirname, dirend - p);
-      dirname[dirend - p] = '\0';
+      char *dirname;
+      char *slash = dirend;
+      if (dirend == filename)
+	dirname = "/";
+      else
+	{
+#if defined (WINDOWS32) || defined (__MSDOS__)
+	  /* d:/ and d: are *very* different...  */
+	  if (dirend < filename + 3 && filename[1] == ':' &&
+	      (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+	    dirend++;
+#endif
+	  dirname = (char *) alloca (dirend - filename + 1);
+	  bcopy (p, dirname, dirend - p);
+	  dirname[dirend - p] = '\0';
+	}
       dir = find_directory (dirname)->contents;
-      p = dirend + 1;
+      p = filename = slash + 1;
     }
 
   if (dir == 0 || dir->files == 0)
@@ -454,13 +848,19 @@ file_impossible_p (filename)
 #ifdef __MSDOS__
   p = filename = dosify (p);
 #endif
+#ifdef HAVE_CASE_INSENSITIVE_FS
+  p = filename = downcase (p);
+#endif
+#ifdef VMS
+  p = filename = vmsify (p, 1);
+#endif
 
   for (hash = 0; *p != '\0'; ++p)
     HASH (hash, *p);
   hash %= DIRFILE_BUCKETS;
 
   for (next = dir->files[hash]; next != 0; next = next->next)
-    if (streq (filename, next->name))
+    if (strieq (filename, next->name))
       return next->impossible;
 
   return 0;
@@ -484,7 +884,7 @@ print_dir_data_base ()
   register unsigned int i, dirs, files, impossible;
   register struct directory *dir;
 
-  puts ("\n# Directories\n");
+  puts (_("\n# Directories\n"));
 
   dirs = files = impossible = 0;
   for (i = 0; i < DIRECTORY_BUCKETS; ++i)
@@ -492,10 +892,23 @@ print_dir_data_base ()
       {
 	++dirs;
 	if (dir->contents == 0)
-	  printf ("# %s: could not be stat'd.\n", dir->name);
+	  printf (_("# %s: could not be stat'd.\n"), dir->name);
 	else if (dir->contents->files == 0)
-	  printf ("# %s (device %d, inode %d): could not be opened.\n",
-		  dir->name, dir->contents->dev, dir->contents->ino);
+#ifdef WINDOWS32
+          printf (_("# %s (key %s, mtime %d): could not be opened.\n"),
+                  dir->name, dir->contents->path_key,dir->contents->mtime);
+#else  /* WINDOWS32 */
+#ifdef VMS
+	  printf (_("# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"),
+		  dir->name, dir->contents->dev,
+		  dir->contents->ino[0], dir->contents->ino[1],
+		  dir->contents->ino[2]);
+#else
+	  printf (_("# %s (device %ld, inode %ld): could not be opened.\n"),
+		  dir->name, (long int) dir->contents->dev,
+		  (long int) dir->contents->ino);
+#endif
+#endif /* WINDOWS32 */
 	else
 	  {
 	    register unsigned int f = 0, im = 0;
@@ -507,22 +920,35 @@ print_dir_data_base ()
 		  ++im;
 		else
 		  ++f;
-	    printf ("# %s (device %d, inode %d): ",
-		    dir->name, dir->contents->dev, dir->contents->ino);
+#ifdef WINDOWS32
+            printf (_("# %s (key %s, mtime %d): "),
+                    dir->name, dir->contents->path_key, dir->contents->mtime);
+#else  /* WINDOWS32 */
+#ifdef VMS
+	    printf (_("# %s (device %d, inode [%d,%d,%d]): "),
+		    dir->name, dir->contents->dev,
+			dir->contents->ino[0], dir->contents->ino[1],
+			dir->contents->ino[2]);
+#else
+	    printf (_("# %s (device %ld, inode %ld): "),
+		    dir->name,
+                    (long)dir->contents->dev, (long)dir->contents->ino);
+#endif
+#endif /* WINDOWS32 */
 	    if (f == 0)
-	      fputs ("No", stdout);
+	      fputs (_("No"), stdout);
 	    else
 	      printf ("%u", f);
-	    fputs (" files, ", stdout);
+	    fputs (_(" files, "), stdout);
 	    if (im == 0)
-	      fputs ("no", stdout);
+	      fputs (_("no"), stdout);
 	    else
 	      printf ("%u", im);
-	    fputs (" impossibilities", stdout);
+	    fputs (_(" impossibilities"), stdout);
 	    if (dir->contents->dirstream == 0)
 	      puts (".");
 	    else
-	      puts (" so far.");
+	      puts (_(" so far."));
 	    files += f;
 	    impossible += im;
 	  }
@@ -530,15 +956,15 @@ print_dir_data_base ()
 
   fputs ("\n# ", stdout);
   if (files == 0)
-    fputs ("No", stdout);
+    fputs (_("No"), stdout);
   else
     printf ("%u", files);
-  fputs (" files, ", stdout);
+  fputs (_(" files, "), stdout);
   if (impossible == 0)
-    fputs ("no", stdout);
+    fputs (_("no"), stdout);
   else
     printf ("%u", impossible);
-  printf (" impossibilities in %u directories.\n", dirs);
+  printf (_(" impossibilities in %u directories.\n"), dirs);
 }
 
 /* Hooks for globbing.  */
@@ -556,15 +982,15 @@ struct dirstream
   };
 
 /* Forward declarations.  */
-static __ptr_t open_dirstream __P ((const char *));
-static const char *read_dirstream __P ((__ptr_t));
+static __ptr_t open_dirstream PARAMS ((const char *));
+static struct dirent *read_dirstream PARAMS ((__ptr_t));
 
 static __ptr_t
 open_dirstream (directory)
      const char *directory;
 {
   struct dirstream *new;
-  struct directory *dir = find_directory (directory);
+  struct directory *dir = find_directory ((char *)directory);
 
   if (dir->contents == 0 || dir->contents->files == 0)
     /* DIR->contents is nil if the directory could not be stat'd.
@@ -584,12 +1010,14 @@ open_dirstream (directory)
   return (__ptr_t) new;
 }
 
-static const char *
+static struct dirent *
 read_dirstream (stream)
      __ptr_t stream;
 {
   struct dirstream *const ds = (struct dirstream *) stream;
   register struct dirfile *df;
+  static char *buf;
+  static unsigned int bufsz;
 
   while (ds->bucket < DIRFILE_BUCKETS)
     {
@@ -597,7 +1025,28 @@ read_dirstream (stream)
 	{
 	  ds->elt = df->next;
 	  if (!df->impossible)
-	    return df->name;
+	    {
+	      /* The glob interface wants a `struct dirent',
+		 so mock one up.  */
+	      struct dirent *d;
+	      unsigned int len = strlen (df->name) + 1;
+	      if (sizeof *d - sizeof d->d_name + len > bufsz)
+		{
+		  if (buf != 0)
+		    free (buf);
+		  bufsz *= 2;
+		  if (sizeof *d - sizeof d->d_name + len > bufsz)
+		    bufsz = sizeof *d - sizeof d->d_name + len;
+		  buf = xmalloc (bufsz);
+		}
+	      d = (struct dirent *) buf;
+	      FAKE_DIR_ENTRY (d);
+#ifdef _DIRENT_HAVE_D_NAMLEN
+	      d->d_namlen = len - 1;
+#endif
+	      memcpy (d->d_name, df->name, len);
+	      return d;
+	    }
 	}
       if (++ds->bucket == DIRFILE_BUCKETS)
 	break;
@@ -607,10 +1056,27 @@ read_dirstream (stream)
   return 0;
 }
 
-void
-init_dir ()
+static void
+ansi_free(p)
+  void *p;
 {
-  __glob_opendir_hook = open_dirstream;
-  __glob_readdir_hook = read_dirstream;
-  __glob_closedir_hook = (void (*) __P ((__ptr_t stream))) free;
+    if (p)
+      free(p);
+}
+
+void
+dir_setup_glob (gl)
+     glob_t *gl;
+{
+#ifndef VMS
+  extern int stat ();
+#endif
+
+  /* Bogus sunos4 compiler complains (!) about & before functions.  */
+  gl->gl_opendir = open_dirstream;
+  gl->gl_readdir = read_dirstream;
+  gl->gl_closedir = ansi_free;
+  gl->gl_stat = stat;
+  /* We don't bother setting gl_lstat, since glob never calls it.
+     The slot is only there for compatibility with 4.4 BSD.  */
 }

dosbuild.bat

@@ -0,0 +1,42 @@
+@echo Building Make for MSDOS
+
+@rem Echo ON so they will see what is going on.
+
+@echo on
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g commands.c -o commands.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g job.c -o job.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g dir.c -o dir.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g file.c -o file.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g misc.c -o misc.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g main.c -o main.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g read.c -o read.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g remake.c -o remake.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g rule.c -o rule.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g implicit.c -o implicit.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g default.c -o default.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g variable.c -o variable.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g expand.c -o expand.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g function.c -o function.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g vpath.c -o vpath.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g version.c -o version.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g ar.c -o ar.o
+
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g arscan.c -o arscan.o
+

expand.c

@@ -1,5 +1,5 @@
 /* Variable expansion functions for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1988, 89, 91, 92, 93, 95 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,21 +14,32 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
+#include "filedef.h"
+#include "job.h"
 #include "commands.h"
-#include "file.h"
 #include "variable.h"
+#include "rule.h"
 
 /* The next two describe the variable output buffer.
    This buffer is used to hold the variable-expansion of a line of the
    makefile.  It is made bigger with realloc whenever it is too small.
    variable_buffer_length is the size currently allocated.
-   variable_buffer is the address of the buffer.  */
+   variable_buffer is the address of the buffer.
+
+   For efficiency, it's guaranteed that the buffer will always have
+   VARIABLE_BUFFER_ZONE extra bytes allocated.  This allows you to add a few
+   extra chars without having to call a function.  Note you should never use
+   these bytes unless you're _sure_ you have room (you know when the buffer
+   length was last checked.  */
+
+#define VARIABLE_BUFFER_ZONE    5
 
 static unsigned int variable_buffer_length;
-static char *variable_buffer;
+char *variable_buffer;
 
 /* Subroutine of variable_expand and friends:
    The text to add is LENGTH chars starting at STRING to the variable_buffer.
@@ -44,7 +55,7 @@ variable_buffer_output (ptr, string, length)
 {
   register unsigned int newlen = length + (ptr - variable_buffer);
 
-  if (newlen > variable_buffer_length)
+  if ((newlen + VARIABLE_BUFFER_ZONE) > variable_buffer_length)
     {
       unsigned int offset = ptr - variable_buffer;
       variable_buffer_length = (newlen + 100 > 2 * variable_buffer_length
@@ -85,17 +96,10 @@ recursively_expand (v)
   char *value;
 
   if (v->expanding)
-    {
-      /* Expanding V causes infinite recursion.  Lose.  */
-      if (reading_filename == 0)
-	fatal ("Recursive variable `%s' references itself (eventually)",
-	       v->name);
-      else
-	makefile_fatal
-	  (reading_filename, *reading_lineno_ptr, 
-	   "Recursive variable `%s' references itself (eventually)",
-	   v->name);
-    }
+    /* Expanding V causes infinite recursion.  Lose.  */
+    fatal (reading_file,
+           _("Recursive variable `%s' references itself (eventually)"),
+           v->name);
 
   v->expanding = 1;
   value = allocated_variable_expand (v->value);
@@ -115,14 +119,8 @@ warn_undefined (name, length)
      unsigned int length;
 {
   if (warn_undefined_variables_flag)
-    {
-      static const char warnmsg[] = "warning: undefined variable `%.*s'";
-      if (reading_filename != 0)
-	makefile_error (reading_filename, *reading_lineno_ptr,
-			warnmsg, length, name);
-      else
-	error (warnmsg, length, name);
-    }
+    error (reading_file,
+           _("warning: undefined variable `%.*s'"), (int)length, name);
 }
 
 /* Expand a simple reference to variable NAME, which is LENGTH chars long.  */
@@ -152,20 +150,38 @@ reference_variable (o, name, length)
   return o;
 }
 
-/* Scan LINE for variable references and expansion-function calls.
-   Build in `variable_buffer' the result of expanding the references and calls.
-   Return the address of the resulting string, which is null-terminated
-   and is valid only until the next time this function is called.  */
+/* Scan STRING for variable references and expansion-function calls.  Only
+   LENGTH bytes of STRING are actually scanned.  If LENGTH is -1, scan until
+   a null byte is found.
+
+   Write the results to LINE, which must point into `variable_buffer'.  If
+   LINE is NULL, start at the beginning of the buffer.
+   Return a pointer to LINE, or to the beginning of the buffer if LINE is
+   NULL.  */
 
 char *
-variable_expand (line)
+variable_expand_string (line, string, length)
      register char *line;
+     char *string;
+     long length;
 {
   register struct variable *v;
   register char *p, *o, *p1;
+  char save_char = '\0';
+  unsigned int line_offset;
 
-  p = line;
-  o = initialize_variable_output ();
+  if (!line)
+    line = initialize_variable_output();
+
+  p = string;
+  o = line;
+  line_offset = line - variable_buffer;
+
+  if (length >= 0)
+    {
+      save_char = string[length];
+      string[length] = '\0';
+    }
 
   while (1)
     {
@@ -197,9 +213,9 @@ variable_expand (line)
 	    char openparen = *p;
 	    char closeparen = (openparen == '(') ? ')' : '}';
 	    register char *beg = p + 1;
+	    int free_beg = 0;
 	    char *op, *begp;
-	    char *end;
-	    char *colon = 0;
+	    char *end, *colon;
 
 	    op = o;
 	    begp = p;
@@ -213,10 +229,12 @@ variable_expand (line)
 	    /* Is there a variable reference inside the parens or braces?
 	       If so, expand it before expanding the entire reference.  */
 
-	    p1 = index (beg, closeparen);
+	    end = index (beg, closeparen);
+	    if (end == 0)
+              /* Unterminated variable reference.  */
+              fatal (reading_file, _("unterminated variable reference"));
+	    p1 = lindex (beg, end, '$');
 	    if (p1 != 0)
-	      p1 = lindex (beg, p1, '$');
-	    if (p1 != 0 && lindex (beg, p1, ':') == 0)
 	      {
 		/* BEG now points past the opening paren or brace.
 		   Count parens or braces until it is matched.  */
@@ -227,133 +245,109 @@ variable_expand (line)
 		      ++count;
 		    else if (*p == closeparen && --count < 0)
 		      break;
-		    else if (colon == 0 && count == 0 && *p == ':')
-		      /* Record where we found a colon, which
-			 indicates a substitution reference.
-			 We want to expand the text before the
-			 reference only.  */
-		      colon = p;
 		  }
 		/* If COUNT is >= 0, there were unmatched opening parens
 		   or braces, so we go to the simple case of a variable name
 		   such as `$($(a)'.  */
 		if (count < 0)
 		  {
-		    char *name = expand_argument (beg, colon == 0 ? p : colon);
-		    unsigned int namelen = strlen (name);
-		    if (colon == 0)
-		      {
-			/* This is a simple reference to the expanded name.  */
-			o = reference_variable (o, name, namelen);
-			free (name);
-			break;
-		      }
-		    else
-		      {
-			/* This is a substitution reference to the expanded
-			   name.  We replace the pending text with a copy
-			   containing the expanded name in place of the
-			   original name, and then fall through to
-			   the normal substitution reference code below.  */
-			unsigned int restlen = strlen (colon) + 1;
-			beg = (char *) alloca (namelen + restlen);
-			bcopy (name, beg, namelen);
-			bcopy (colon, &beg[namelen], restlen);
-			/* Point COLON into the new copy.  */
-			colon = &beg[namelen];
-		      }
+		    beg = expand_argument (beg, p); /* Expand the name.  */
+		    free_beg = 1; /* Remember to free BEG when finished.  */
+		    end = index (beg, '\0');
 		  }
 	      }
+	    else
+	      /* Advance P to the end of this reference.  After we are
+                 finished expanding this one, P will be incremented to
+                 continue the scan.  */
+	      p = end;
 
 	    /* This is not a reference to a built-in function and
-	       it does not contain any variable references inside.
-	       There are several things it could be.  */
+	       any variable references inside are now expanded.
+	       Is the resultant text a substitution reference?  */
 
-	    if (colon == 0)
-	      colon = index (beg, ':');
-	    if (colon != 0 && lindex (beg, colon, closeparen) == 0)
+	    colon = lindex (beg, end, ':');
+	    if (colon != 0)
 	      {
-		/* This is a substitution reference: $(FOO:A=B).  */
-		int count;
+		/* This looks like a substitution reference: $(FOO:A=B).  */
 		char *subst_beg, *subst_end, *replace_beg, *replace_end;
 
-		v = lookup_variable (beg, colon - beg);
-		if (v == 0)
-		  warn_undefined (beg, colon - beg);
-
 		subst_beg = colon + 1;
-		count = 0;
-		for (p = subst_beg; *p != '\0'; ++p)
+		subst_end = index (subst_beg, '=');
+		if (subst_end == 0)
+		  /* There is no = in sight.  Punt on the substitution
+		     reference and treat this as a variable name containing
+		     a colon, in the code below.  */
+		  colon = 0;
+		else
 		  {
-		    if (*p == openparen)
-		      ++count;
-		    else if (*p == closeparen)
-		      --count;
-		    else if (*p == '=' && count <= 0)
-		      break;
+		    replace_beg = subst_end + 1;
+		    replace_end = end;
+
+		    /* Extract the variable name before the colon
+		       and look up that variable.  */
+		    v = lookup_variable (beg, colon - beg);
+		    if (v == 0)
+		      warn_undefined (beg, colon - beg);
+
+		    if (v != 0 && *v->value != '\0')
+		      {
+			char *value = (v->recursive ? recursively_expand (v)
+				       : v->value);
+			char *pattern, *percent;
+			if (free_beg)
+			  {
+			    *subst_end = '\0';
+			    pattern = subst_beg;
+			  }
+			else
+			  {
+			    pattern = (char *) alloca (subst_end - subst_beg
+						       + 1);
+			    bcopy (subst_beg, pattern, subst_end - subst_beg);
+			    pattern[subst_end - subst_beg] = '\0';
+			  }
+			percent = find_percent (pattern);
+			if (percent != 0)
+			  {
+			    char *replace;
+			    if (free_beg)
+			      {
+				*replace_end = '\0';
+				replace = replace_beg;
+			      }
+			    else
+			      {
+				replace = (char *) alloca (replace_end
+							   - replace_beg
+							   + 1);
+				bcopy (replace_beg, replace,
+				       replace_end - replace_beg);
+				replace[replace_end - replace_beg] = '\0';
+			      }
+
+			    o = patsubst_expand (o, value, pattern, replace,
+						 percent, (char *) 0);
+			  }
+			else
+			  o = subst_expand (o, value,
+					    pattern, replace_beg,
+					    strlen (pattern),
+					    end - replace_beg,
+					    0, 1);
+			if (v->recursive)
+			  free (value);
+		      }
 		  }
-		if (count > 0)
-		  /* There were unmatched opening parens.  */
-		  return initialize_variable_output ();
-		subst_end = p;
-
-		replace_beg = p + 1;
-		count = 0;
-		for (p = replace_beg; *p != '\0'; ++p)
-		  {
-		    if (*p == openparen)
-		      ++count;
-		    else if (*p == closeparen && --count < 0)
-		      break;
-		  }
-		if (count > 0)
-		  /* There were unmatched opening parens.  */
-		  return initialize_variable_output ();
-		end = p;
-		replace_end = p;
-
-		p = expand_argument (subst_beg, subst_end);
-		p1 = expand_argument (replace_beg, replace_end);
-
-		if (v != 0 && *v->value != '\0')
-		  {
-		    char *value = (v->recursive ? recursively_expand (v)
-				   : v->value);
-		    char *percent = find_percent (p);
-		    if (percent != 0)
-		      o = patsubst_expand (o, value, p, p1,
-					   percent, (char *) 0);
-		    else
-		      o = subst_expand (o, value,
-					p, p1, strlen (p), strlen (p1),
-					0, 1);
-		    if (v->recursive)
-		      free (value);
-		  }
-
-		free (p);
-		free (p1);
 	      }
 
-	    /* No, this must be an ordinary variable reference.  */
-	    else
-	      {
-		/* Look up the value of the variable.  */
-		end = index (beg, closeparen);
-		if (end == 0)
-		  {
-		    /* Unterminated variable reference.  */
-		    if (reading_filename != 0)
-		      makefile_fatal (reading_filename, *reading_lineno_ptr,
-				      "unterminated variable reference");
-		    else
-		      fatal ("unterminated variable reference");
-		  }
+	    if (colon == 0)
+	      /* This is an ordinary variable reference.
+		 Look up the value of the variable.  */
 		o = reference_variable (o, beg, end - beg);
-	      }
 
-	    /* Advance p past the variable reference to resume scan.  */
-	    p = end;
+	  if (free_beg)
+	    free (beg);
 	  }
 	  break;
 
@@ -381,7 +375,7 @@ variable_expand (line)
 	  }
 
 	  break;
-	}      
+	}
 
       if (*p == '\0')
 	break;
@@ -389,8 +383,23 @@ variable_expand (line)
 	++p;
     }
 
-  (void) variable_buffer_output (o, "", 1);
-  return initialize_variable_output ();
+  if (save_char)
+    string[length] = save_char;
+
+  (void)variable_buffer_output (o, "", 1);
+  return (variable_buffer + line_offset);
+}
+
+/* Scan LINE for variable references and expansion-function calls.
+   Build in `variable_buffer' the result of expanding the references and calls.
+   Return the address of the resulting string, which is null-terminated
+   and is valid only until the next time this function is called.  */
+
+char *
+variable_expand (line)
+     char *line;
+{
+  return variable_expand_string(NULL, line, (long)-1);
 }
 
 /* Expand an argument for an expansion function.
@@ -420,25 +429,39 @@ expand_argument (str, end)
 /* Expand LINE for FILE.  Error messages refer to the file and line where
    FILE's commands were found.  Expansion uses FILE's variable set list.  */
 
-char *
+static char *
 variable_expand_for_file (line, file)
      char *line;
      register struct file *file;
 {
   char *result;
-  struct variable_set_list *save;
+  struct variable_set_list *save, *fnext;
 
   if (file == 0)
     return variable_expand (line);
 
   save = current_variable_set_list;
   current_variable_set_list = file->variables;
-  reading_filename = file->cmds->filename;
-  reading_lineno_ptr = &file->cmds->lineno;
+  if (file->cmds && file->cmds->fileinfo.filenm)
+    reading_file = &file->cmds->fileinfo;
+  else
+    reading_file = 0;
+  fnext = file->variables->next;
+  /* See if there's a pattern-specific variable struct for this target.  */
+  if (!file->pat_searched)
+    {
+      file->patvar = lookup_pattern_var(file->name);
+      file->pat_searched = 1;
+    }
+  if (file->patvar != 0)
+    {
+      file->patvar->vars->next = fnext;
+      file->variables->next = file->patvar->vars;
+    }
   result = variable_expand (line);
   current_variable_set_list = save;
-  reading_filename = 0;
-  reading_lineno_ptr = 0;
+  reading_file = 0;
+  file->variables->next = fnext;
 
   return result;
 }

file.c

@@ -1,5 +1,5 @@
 /* Target file hash table management for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,94,95,96,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,12 +14,16 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+#include <assert.h>
 
 #include "make.h"
-#include "commands.h"
 #include "dep.h"
-#include "file.h"
+#include "filedef.h"
+#include "job.h"
+#include "commands.h"
 #include "variable.h"
 
 
@@ -34,6 +38,9 @@ static struct file *files[FILE_BUCKETS];
 
 unsigned int num_intermediates = 0;
 
+/* Current value for pruning the scan of the goal chain (toggle 0/1).  */
+
+unsigned int considered = 0;
 
 /* Access the hash table of all file records.
    lookup_file  given a name, return the struct file * for that name,
@@ -47,6 +54,9 @@ lookup_file (name)
   register struct file *f;
   register char *n;
   register unsigned int hashval;
+#ifdef VMS
+  register char *lname, *ln;
+#endif
 
   if (*name == '\0')
     abort ();
@@ -54,6 +64,16 @@ lookup_file (name)
   /* This is also done in parse_file_seq, so this is redundant
      for names read from makefiles.  It is here for names passed
      on the command line.  */
+#ifdef VMS
+  lname = (char *)malloc(strlen(name) + 1);
+  for (n=name, ln=lname; *n != '\0'; ++n, ++ln)
+    *ln = isupper(*n) ? tolower(*n) : *n;
+  *ln = '\0';
+  name = lname;
+
+  while (name[0] == '[' && name[1] == ']' && name[2] != '\0')
+      name += 2;
+#endif
   while (name[0] == '.' && name[1] == '/' && name[2] != '\0')
     {
       name += 2;
@@ -64,16 +84,34 @@ lookup_file (name)
 
   if (*name == '\0')
     /* It was all slashes after a dot.  */
+#ifdef VMS
+    name = "[]";
+#else
+#ifdef _AMIGA
+    name = "";
+#else
     name = "./";
+#endif /* AMIGA */
+#endif /* VMS */
 
   hashval = 0;
   for (n = name; *n != '\0'; ++n)
-    HASH (hashval, *n);
+    HASHI (hashval, *n);
   hashval %= FILE_BUCKETS;
 
   for (f = files[hashval]; f != 0; f = f->next)
-    if (streq (f->name, name))
-      return f;
+    {
+      if (strieq (f->hname, name))
+	{
+#ifdef VMS
+	  free (lname);
+#endif
+	  return f;
+	}
+    }
+#ifdef VMS
+  free (lname);
+#endif
   return 0;
 }
 
@@ -84,25 +122,46 @@ enter_file (name)
   register struct file *f, *new;
   register char *n;
   register unsigned int hashval;
+#ifdef VMS
+  char *lname, *ln;
+#endif
 
   if (*name == '\0')
     abort ();
 
+#ifdef VMS
+  lname = (char *)malloc (strlen (name) + 1);
+  for (n = name, ln = lname; *n != '\0'; ++n, ++ln)
+    {
+      if (isupper(*n))
+	*ln = tolower(*n);
+      else
+	*ln = *n;
+    }
+  *ln = 0;
+  name = lname;
+#endif
+
   hashval = 0;
   for (n = name; *n != '\0'; ++n)
-    HASH (hashval, *n);
+    HASHI (hashval, *n);
   hashval %= FILE_BUCKETS;
 
   for (f = files[hashval]; f != 0; f = f->next)
-    if (streq (f->name, name))
+    if (strieq (f->hname, name))
       break;
 
   if (f != 0 && !f->double_colon)
-    return f;
+    {
+#ifdef VMS
+      free(lname);
+#endif
+      return f;
+    }
 
   new = (struct file *) xmalloc (sizeof (struct file));
   bzero ((char *) new, sizeof (struct file));
-  new->name = name;
+  new->name = new->hname = name;
   new->update_status = -1;
 
   if (f == 0)
@@ -123,16 +182,16 @@ enter_file (name)
   return new;
 }
 
-/* Rename FILE to NAME.  This is not as simple as resetting
-   the `name' member, since it must be put in a new hash bucket,
+/* Rehash FILE to NAME.  This is not as simple as resetting
+   the `hname' member, since it must be put in a new hash bucket,
    and possibly merged with an existing file called NAME.  */
 
 void
-rename_file (file, name)
+rehash_file (file, name)
      register struct file *file;
      char *name;
 {
-  char *oldname = file->name;
+  char *oldname = file->hname;
   register unsigned int oldhash;
   register char *n;
 
@@ -143,11 +202,28 @@ rename_file (file, name)
 
   oldhash = 0;
   for (n = oldname; *n != '\0'; ++n)
-    HASH (oldhash, *n);
+    HASHI (oldhash, *n);
 
   file_hash_enter (file, name, oldhash, file->name);
 }
 
+/* Rename FILE to NAME.  This is not as simple as resetting
+   the `name' member, since it must be put in a new hash bucket,
+   and possibly merged with an existing file called NAME.  */
+
+void
+rename_file (file, name)
+     register struct file *file;
+     char *name;
+{
+  rehash_file(file, name);
+  while (file)
+    {
+      file->name = file->hname;
+      file = file->prev;
+    }
+}
+
 void
 file_hash_enter (file, name, oldhash, oldname)
      register struct file *file;
@@ -163,15 +239,18 @@ file_hash_enter (file, name, oldhash, oldname)
 
   newhash = 0;
   for (n = name; *n != '\0'; ++n)
-    HASH (newhash, *n);
+    HASHI (newhash, *n);
   newbucket = newhash % FILE_BUCKETS;
 
   /* Look for an existing file under the new name.  */
 
   for (oldfile = files[newbucket]; oldfile != 0; oldfile = oldfile->next)
-    if (streq (oldfile->name, name))
+    if (strieq (oldfile->hname, name))
       break;
 
+  /* If the old file is the same as the new file, something's wrong.  */
+  assert (oldfile != file);
+
   if (oldhash != 0 && (newbucket != oldbucket || oldfile != 0))
     {
       /* Remove FILE from its hash bucket.  */
@@ -189,9 +268,9 @@ file_hash_enter (file, name, oldhash, oldname)
 
   /* Give FILE its new name.  */
 
-  file->name = name;
+  file->hname = name;
   for (f = file->double_colon; f != 0; f = f->prev)
-    f->name = name;
+    f->hname = name;
 
   if (oldfile == 0)
     {
@@ -220,24 +299,24 @@ file_hash_enter (file, name, oldhash, oldname)
 	      /* We have two sets of commands.  We will go with the
 		 one given in the rule explicitly mentioning this name,
 		 but give a message to let the user know what's going on.  */
-	      if (oldfile->cmds->filename != 0)
-		makefile_error (file->cmds->filename, file->cmds->lineno,
-				"Commands were specified for \
-file `%s' at %s:%u,",
-				oldname, oldfile->cmds->filename,
-				oldfile->cmds->lineno);
+	      if (oldfile->cmds->fileinfo.filenm != 0)
+                error (&file->cmds->fileinfo,
+                                _("Commands were specified for \
+file `%s' at %s:%lu,"),
+                                oldname, oldfile->cmds->fileinfo.filenm,
+                                oldfile->cmds->fileinfo.lineno);
 	      else
-		makefile_error (file->cmds->filename, file->cmds->lineno,
-				"Commands for file `%s' were found by \
-implicit rule search,",
+		error (&file->cmds->fileinfo,
+				_("Commands for file `%s' were found by \
+implicit rule search,"),
 				oldname);
-	      makefile_error (file->cmds->filename, file->cmds->lineno,
-			      "but `%s' is now considered the same file \
-as `%s'.",
+	      error (&file->cmds->fileinfo,
+			      _("but `%s' is now considered the same file \
+as `%s'."),
 			      oldname, name);
-	      makefile_error (file->cmds->filename, file->cmds->lineno,
-			      "Commands for `%s' will be ignored \
-in favor of those for `%s'.",
+	      error (&file->cmds->fileinfo,
+			      _("Commands for `%s' will be ignored \
+in favor of those for `%s'."),
 			      name, oldname);
 	    }
 	}
@@ -256,17 +335,24 @@ in favor of those for `%s'.",
 
       merge_variable_set_lists (&oldfile->variables, file->variables);
 
-      if (oldfile->double_colon && !file->double_colon)
-	fatal ("can't rename single-colon `%s' to double-colon `%s'",
-	       oldname, name);
-      if (!oldfile->double_colon && file->double_colon)
-	fatal ("can't rename double-colon `%s' to single-colon `%s'",
+      if (oldfile->double_colon && file->is_target && !file->double_colon)
+	fatal (NILF, _("can't rename single-colon `%s' to double-colon `%s'"),
 	       oldname, name);
+      if (!oldfile->double_colon  && file->double_colon)
+	{
+	  if (oldfile->is_target)
+	    fatal (NILF, _("can't rename double-colon `%s' to single-colon `%s'"),
+		   oldname, name);
+	  else
+	    oldfile->double_colon = file->double_colon;
+	}
 
       if (file->last_mtime > oldfile->last_mtime)
 	/* %%% Kludge so -W wins on a file that gets vpathized.  */
 	oldfile->last_mtime = file->last_mtime;
 
+      oldfile->mtime_before_update = file->mtime_before_update;
+
 #define MERGE(field) oldfile->field |= file->field
       MERGE (precious);
       MERGE (tried_implicit);
@@ -275,6 +361,7 @@ in favor of those for `%s'.",
       MERGE (is_target);
       MERGE (cmd_target);
       MERGE (phony);
+      MERGE (ignore_vpath);
 #undef MERGE
 
       file->renamed = oldfile;
@@ -293,18 +380,25 @@ remove_intermediates (sig)
   register int i;
   register struct file *f;
   char doneany;
-  
-  if (!sig && just_print_flag)
+
+  if (question_flag || touch_flag)
+    return;
+  if (sig && just_print_flag)
     return;
 
   doneany = 0;
   for (i = 0; i < FILE_BUCKETS; ++i)
     for (f = files[i]; f != 0; f = f->next)
-      if (f->intermediate && (f->dontcare || !f->precious))
+      if (f->intermediate && (f->dontcare || !f->precious)
+	  && !f->secondary)
 	{
 	  int status;
-	  if (just_print_flag)
-	    status = 0;
+	  if (f->update_status == -1)
+	    /* If nothing would have created this file yet,
+	       don't print an "rm" command for it.  */
+            continue;
+ 	  else if (just_print_flag)
+  	    status = 0;
 	  else
 	    {
 	      status = unlink (f->name);
@@ -314,7 +408,7 @@ remove_intermediates (sig)
 	  if (!f->dontcare)
 	    {
 	      if (sig)
-		error ("*** Deleting intermediate file `%s'", f->name);
+		error (NILF, _("*** Deleting intermediate file `%s'"), f->name);
 	      else if (!silent_flag)
 		{
 		  if (! doneany)
@@ -342,7 +436,8 @@ remove_intermediates (sig)
 /* For each dependency of each file, make the `struct dep' point
    at the appropriate `struct file' (which may have to be created).
 
-   Also mark the files depended on by .PRECIOUS and .PHONY.  */
+   Also mark the files depended on by .PRECIOUS, .PHONY, .SILENT,
+   and various other special targets.  */
 
 void
 snap_deps ()
@@ -365,7 +460,7 @@ snap_deps ()
 		free (d->name);
 	      d->name = 0;
 	    }
-  
+
   for (f = lookup_file (".PRECIOUS"); f != 0; f = f->prev)
     for (d = f->deps; d != 0; d = d->next)
       for (f2 = d->file; f2 != 0; f2 = f2->prev)
@@ -377,9 +472,45 @@ snap_deps ()
 	{
 	  /* Mark this file as phony and nonexistent.  */
 	  f2->phony = 1;
-	  f2->last_mtime = (time_t) -1;
+	  f2->last_mtime = (FILE_TIMESTAMP) -1;
+	  f2->mtime_before_update = (FILE_TIMESTAMP) -1;
 	}
 
+  for (f = lookup_file (".INTERMEDIATE"); f != 0; f = f->prev)
+    {
+      /* .INTERMEDIATE with deps listed
+	 marks those deps as intermediate files.  */
+      for (d = f->deps; d != 0; d = d->next)
+	for (f2 = d->file; f2 != 0; f2 = f2->prev)
+	  f2->intermediate = 1;
+      /* .INTERMEDIATE with no deps does nothing.
+	 Marking all files as intermediates is useless
+	 since the goal targets would be deleted after they are built.  */
+    }
+
+  for (f = lookup_file (".SECONDARY"); f != 0; f = f->prev)
+    {
+      /* .SECONDARY with deps listed
+	 marks those deps as intermediate files
+	 in that they don't get rebuilt if not actually needed;
+	 but unlike real intermediate files,
+	 these are not deleted after make finishes.  */
+      if (f->deps)
+	{
+	  for (d = f->deps; d != 0; d = d->next)
+	    for (f2 = d->file; f2 != 0; f2 = f2->prev)
+	      f2->intermediate = f2->secondary = 1;
+	}
+      /* .SECONDARY with no deps listed marks *all* files that way.  */
+      else
+	{
+	  int i;
+	  for (i = 0; i < FILE_BUCKETS; i++)
+	    for (f2 = files[i]; f2; f2= f2->next)
+	      f2->intermediate = f2->secondary = 1;
+	}
+    }
+
   f = lookup_file (".EXPORT_ALL_VARIABLES");
   if (f != 0 && f->is_target)
     export_all_variables = 1;
@@ -426,6 +557,51 @@ set_command_state (file, state)
     d->file->command_state = state;
 }
 
+/* Get and print file timestamps.  */
+
+FILE_TIMESTAMP
+file_timestamp_now ()
+{
+#if HAVE_CLOCK_GETTIME && defined CLOCK_REALTIME
+  struct timespec timespec;
+  if (clock_gettime (CLOCK_REALTIME, &timespec) == 0)
+    return FILE_TIMESTAMP_FROM_S_AND_NS (timespec.tv_sec, timespec.tv_nsec);
+#endif
+  return FILE_TIMESTAMP_FROM_S_AND_NS (time ((time_t *) 0), 0);
+}
+
+void
+file_timestamp_sprintf (p, ts)
+     char *p;
+     FILE_TIMESTAMP ts;
+{
+  time_t t = FILE_TIMESTAMP_S (ts);
+  struct tm *tm = localtime (&t);
+
+  if (tm)
+    sprintf (p, "%04d-%02d-%02d %02d:%02d:%02d",
+	     tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+	     tm->tm_hour, tm->tm_min, tm->tm_sec);
+  else if (t < 0)
+    sprintf (p, "%ld", (long) t);
+  else
+    sprintf (p, "%lu", (unsigned long) t);
+  p += strlen (p);
+
+  /* Append nanoseconds as a fraction, but remove trailing zeros.
+     We don't know the actual timestamp resolution, since clock_getres
+     applies only to local times, whereas this timestamp might come
+     from a remote filesystem.  So removing trailing zeros is the
+     best guess that we can do.  */
+  sprintf (p, ".%09ld", (long) FILE_TIMESTAMP_NS (ts));
+  p += strlen (p) - 1;
+  while (*p == '0')
+    p--;
+  p += *p != '.';
+
+  *p = '\0';
+}
+
 /* Print the data base of files.  */
 
 static void
@@ -436,50 +612,53 @@ print_file (f)
 
   putchar ('\n');
   if (!f->is_target)
-    puts ("# Not a target:");
+    puts (_("# Not a target:"));
   printf ("%s:%s", f->name, f->double_colon ? ":" : "");
-	      
+
   for (d = f->deps; d != 0; d = d->next)
     printf (" %s", dep_name (d));
   putchar ('\n');
-	      
+
   if (f->precious)
-    puts ("#  Precious file (dependency of .PRECIOUS).");
+    puts (_("#  Precious file (prerequisite of .PRECIOUS)."));
   if (f->phony)
-    puts ("#  Phony target (dependency of .PHONY).");
+    puts (_("#  Phony target (prerequisite of .PHONY)."));
   if (f->cmd_target)
-    puts ("#  Command-line target.");
+    puts (_("#  Command-line target."));
   if (f->dontcare)
-    puts ("#  A default or MAKEFILES makefile.");
-  printf ("#  Implicit rule search has%s been done.\n",
-	  f->tried_implicit ? "" : " not");
+    puts (_("#  A default or MAKEFILES makefile."));
+  printf (_("#  Implicit rule search has%s been done.\n"),
+	  f->tried_implicit ? "" : _(" not"));
   if (f->stem != 0)
-    printf ("#  Implicit/static pattern stem: `%s'\n", f->stem);
+    printf (_("#  Implicit/static pattern stem: `%s'\n"), f->stem);
   if (f->intermediate)
-    puts ("#  File is an intermediate dependency.");
+    puts (_("#  File is an intermediate prerequisite."));
   if (f->also_make != 0)
     {
-      fputs ("#  Also makes:", stdout);
+      fputs (_("#  Also makes:"), stdout);
       for (d = f->also_make; d != 0; d = d->next)
 	printf (" %s", dep_name (d));
       putchar ('\n');
     }
-  if (f->last_mtime == (time_t) 0)
-    puts ("#  Modification time never checked.");
-  else if (f->last_mtime == (time_t) -1)
-    puts ("#  File does not exist.");
+  if (f->last_mtime == 0)
+    puts (_("#  Modification time never checked."));
+  else if (f->last_mtime == (FILE_TIMESTAMP) -1)
+    puts (_("#  File does not exist."));
   else
-    printf ("#  Last modified %.24s (%ld)\n",
-	    ctime (&f->last_mtime), (long int) f->last_mtime);
-  printf ("#  File has%s been updated.\n",
-	  f->updated ? "" : " not");
+    {
+      char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
+      file_timestamp_sprintf (buf, f->last_mtime);
+      printf (_("#  Last modified %s\n"), buf);
+    }
+  printf (_("#  File has%s been updated.\n"),
+	  f->updated ? "" : _(" not"));
   switch (f->command_state)
     {
     case cs_running:
-      puts ("#  Commands currently running (THIS IS A BUG).");
+      puts (_("#  Commands currently running (THIS IS A BUG)."));
       break;
     case cs_deps_running:
-      puts ("#  Dependencies commands running (THIS IS A BUG).");
+      puts (_("#  Dependencies commands running (THIS IS A BUG)."));
       break;
     case cs_not_started:
     case cs_finished:
@@ -488,20 +667,24 @@ print_file (f)
 	case -1:
 	  break;
 	case 0:
-	  puts ("#  Successfully updated.");
+	  puts (_("#  Successfully updated."));
 	  break;
 	case 1:
-	  puts ("#  Failed to be updated.");
+	  assert (question_flag);
+	  puts (_("#  Needs to be updated (-q is set)."));
+	  break;
+	case 2:
+	  puts (_("#  Failed to be updated."));
 	  break;
 	default:
-	  puts ("#  Invalid value in `update_status' member!");
+	  puts (_("#  Invalid value in `update_status' member!"));
 	  fflush (stdout);
 	  fflush (stderr);
 	  abort ();
 	}
       break;
     default:
-      puts ("#  Invalid value in `command_state' member!");
+      puts (_("#  Invalid value in `command_state' member!"));
       fflush (stdout);
       fflush (stderr);
       abort ();
@@ -520,7 +703,7 @@ print_file_data_base ()
   register unsigned int i, nfiles, per_bucket;
   register struct file *file;
 
-  puts ("\n# Files");
+  puts (_("\n# Files"));
 
   per_bucket = nfiles = 0;
   for (i = 0; i < FILE_BUCKETS; ++i)
@@ -543,13 +726,15 @@ print_file_data_base ()
     }
 
   if (nfiles == 0)
-    puts ("\n# No files.");
+    puts (_("\n# No files."));
   else
     {
-      printf ("\n# %u files in %u hash buckets.\n", nfiles, FILE_BUCKETS);
+      printf (_("\n# %u files in %u hash buckets.\n"), nfiles, FILE_BUCKETS);
 #ifndef	NO_FLOAT
-      printf ("# average %.1f files per bucket, max %u files in one bucket.\n",
-	      ((double) nfiles) / ((double) FILE_BUCKETS) * 100.0, per_bucket);
+      printf (_("# average %.3f files per bucket, max %u files in one bucket.\n"),
+	      ((double) nfiles) / ((double) FILE_BUCKETS), per_bucket);
 #endif
     }
 }
+
+/* EOF */

file.h

@@ -1,111 +0,0 @@
-/* Definition of target file data structures for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Structure that represents the info on one file
-   that the makefile says how to make.
-   All of these are chained together through `next'.  */
-
-struct file
-  {
-    struct file *next;
-    char *name;
-    struct dep *deps;
-    struct commands *cmds;	/* Commands to execute for this target.  */
-    int command_flags;		/* Flags OR'd in for cmds; see commands.h.  */
-    char *stem;			/* Implicit stem, if an implicit
-    				   rule has been used */
-    struct dep *also_make;	/* Targets that are made by making this.  */
-    time_t last_mtime;		/* File's modtime, if already known.  */
-    struct file *prev;		/* Previous entry for same file name;
-				   used when there are multiple double-colon
-				   entries for the same file.  */
-
-    /* File that this file was renamed to.  After any time that a
-       file could be renamed, call `check_renamed' (below).  */
-    struct file *renamed;
-
-    /* List of variable sets used for this file.  */
-    struct variable_set_list *variables;
-
-    /* Immediate dependent that caused this target to be remade,
-       or nil if there isn't one.  */
-    struct file *parent;
-
-    /* For a double-colon entry, this is the first double-colon entry for
-       the same file.  Otherwise this is null.  */
-    struct file *double_colon;
-
-    short int update_status;	/* Status of the last attempt to update,
-				   or -1 if none has been made.  */
-
-    enum			/* State of the commands.  */
-      {		/* Note: It is important that cs_not_started be zero.  */
-	cs_not_started,		/* Not yet started.  */
-	cs_deps_running,	/* Dep commands running.  */
-	cs_running,		/* Commands running.  */
-	cs_finished		/* Commands finished.  */
-      } command_state ENUM_BITFIELD (2);
-
-    unsigned int precious:1;	/* Non-0 means don't delete file on quit */
-    unsigned int tried_implicit:1; /* Nonzero if have searched
-				      for implicit rule for making
-				      this file; don't search again.  */
-    unsigned int updating:1;	/* Nonzero while updating deps of this file */
-    unsigned int updated:1;	/* Nonzero if this file has been remade.  */
-    unsigned int is_target:1;	/* Nonzero if file is described as target.  */
-    unsigned int cmd_target:1;	/* Nonzero if file was given on cmd line.  */
-    unsigned int phony:1;	/* Nonzero if this is a phony file
-				   i.e., a dependency of .PHONY.  */
-    unsigned int intermediate:1;/* Nonzero if this is an intermediate file.  */
-    unsigned int dontcare:1;	/* Nonzero if no complaint is to be made if
-				   this target cannot be remade.  */
-  };
-
-/* Number of intermediate files entered.  */
-
-extern unsigned int num_intermediates;
-
-extern struct file *default_goal_file, *suffix_file, *default_file;
-
-
-extern struct file *lookup_file (), *enter_file ();
-extern void remove_intermediates (), snap_deps ();
-extern void rename_file (), file_hash_enter ();
-extern void set_command_state ();
-
-
-extern time_t f_mtime ();
-#define file_mtime_1(f, v) \
-  ((f)->last_mtime != (time_t) 0 ? (f)->last_mtime : f_mtime ((f), v))
-#define file_mtime(f) file_mtime_1 ((f), 1)
-#define file_mtime_no_search(f) file_mtime_1 ((f), 0)
-
-/* Modtime value to use for `infinitely new'.  We used to get the current time
-   from the system and use that whenever we wanted `new'.  But that causes
-   trouble when the machine running make and the machine holding a file have
-   different ideas about what time it is; and can also lose for `force'
-   targets, which need to be considered newer than anything that depends on
-   them, even if said dependents' modtimes are in the future.
-
-   NOTE: This assumes 32-bit `time_t's, but I cannot think of a portable way
-   to produce the largest representable integer of a given signed type.  */
-#define NEW_MTIME	((time_t) 0x7fffffff)
-
-
-#define check_renamed(file) \
-  while ((file)->renamed != 0) (file) = (file)->renamed /* No ; here.  */

filedef.h

@@ -0,0 +1,195 @@
+/* Definition of target file data structures for GNU Make.
+Copyright (C) 1988,89,90,91,92,93,94,97 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU Make is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Make; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+
+/* Structure that represents the info on one file
+   that the makefile says how to make.
+   All of these are chained together through `next'.  */
+
+struct file
+  {
+    struct file *next;
+    char *name;
+    char *hname;                /* Hashed filename */
+    char *vpath;                /* VPATH/vpath pathname */
+    struct dep *deps;
+    struct commands *cmds;	/* Commands to execute for this target.  */
+    int command_flags;		/* Flags OR'd in for cmds; see commands.h.  */
+    char *stem;			/* Implicit stem, if an implicit
+    				   rule has been used */
+    struct dep *also_make;	/* Targets that are made by making this.  */
+    FILE_TIMESTAMP last_mtime;	/* File's modtime, if already known.  */
+    FILE_TIMESTAMP mtime_before_update;	/* File's modtime before any updating
+                                           has been performed.  */
+    struct file *prev;		/* Previous entry for same file name;
+				   used when there are multiple double-colon
+				   entries for the same file.  */
+
+    /* File that this file was renamed to.  After any time that a
+       file could be renamed, call `check_renamed' (below).  */
+    struct file *renamed;
+
+    /* List of variable sets used for this file.  */
+    struct variable_set_list *variables;
+
+    /* Immediate dependent that caused this target to be remade,
+       or nil if there isn't one.  */
+    struct file *parent;
+
+    /* For a double-colon entry, this is the first double-colon entry for
+       the same file.  Otherwise this is null.  */
+    struct file *double_colon;
+
+    /* Pattern-specific variable reference for this target, or null if there
+       isn't one.  Also see the pat_searched flag, below.  */
+    struct pattern_var *patvar;
+
+    short int update_status;	/* Status of the last attempt to update,
+				   or -1 if none has been made.  */
+
+    enum			/* State of the commands.  */
+      {		/* Note: It is important that cs_not_started be zero.  */
+	cs_not_started,		/* Not yet started.  */
+	cs_deps_running,	/* Dep commands running.  */
+	cs_running,		/* Commands running.  */
+	cs_finished		/* Commands finished.  */
+      } command_state ENUM_BITFIELD (2);
+
+    unsigned int precious:1;	/* Non-0 means don't delete file on quit */
+    unsigned int tried_implicit:1; /* Nonzero if have searched
+				      for implicit rule for making
+				      this file; don't search again.  */
+    unsigned int updating:1;	/* Nonzero while updating deps of this file */
+    unsigned int updated:1;	/* Nonzero if this file has been remade.  */
+    unsigned int is_target:1;	/* Nonzero if file is described as target.  */
+    unsigned int cmd_target:1;	/* Nonzero if file was given on cmd line.  */
+    unsigned int phony:1;	/* Nonzero if this is a phony file
+				   i.e., a dependency of .PHONY.  */
+    unsigned int intermediate:1;/* Nonzero if this is an intermediate file.  */
+    /* Nonzero, for an intermediate file,
+       means remove_intermediates should not delete it.  */
+    unsigned int secondary:1;
+    unsigned int dontcare:1;	/* Nonzero if no complaint is to be made if
+				   this target cannot be remade.  */
+    unsigned int mfile_status:1;/* Nonzero if update_status was obtained
+                                   while remaking a makefile.  */
+    unsigned int ignore_vpath:1;/* Nonzero if we threw out VPATH name.  */
+    unsigned int pat_searched:1;/* Nonzero if we already searched for
+                                   pattern-specific variables.  */
+    unsigned int considered:1;  /* equal to `considered' if file has been
+                                   considered on current scan of goal chain */
+  };
+
+/* Number of intermediate files entered.  */
+
+extern unsigned int num_intermediates;
+
+/* Current value for pruning the scan of the goal chain (toggle 0/1).  */
+
+extern unsigned int considered;
+
+extern struct file *default_goal_file, *suffix_file, *default_file;
+
+
+extern struct file *lookup_file PARAMS ((char *name));
+extern struct file *enter_file PARAMS ((char *name));
+extern void remove_intermediates PARAMS ((int sig));
+extern void snap_deps PARAMS ((void));
+extern void rename_file PARAMS ((struct file *file, char *name));
+extern void rehash_file PARAMS ((struct file *file, char *name));
+extern void file_hash_enter PARAMS ((struct file *file, char *name,
+                                     unsigned int oldhash, char *oldname));
+extern void set_command_state PARAMS ((struct file *file, int state));
+extern void notice_finished_file PARAMS ((struct file *file));
+
+
+#if ST_MTIM_NSEC
+# define FILE_TIMESTAMP_STAT_MODTIME(st) \
+    FILE_TIMESTAMP_FROM_S_AND_NS ((st).st_mtim.tv_sec, \
+                                  (st).st_mtim.ST_MTIM_NSEC)
+# define FILE_TIMESTAMPS_PER_S \
+    MIN ((FILE_TIMESTAMP) 1000000000, \
+         (INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP) \
+         / INTEGER_TYPE_MAXIMUM (time_t)))
+#else
+# define FILE_TIMESTAMP_STAT_MODTIME(st) ((st).st_mtime)
+# define FILE_TIMESTAMPS_PER_S 1
+#endif
+
+#define FILE_TIMESTAMP_FROM_S_AND_NS(s, ns) \
+    ((s) * FILE_TIMESTAMPS_PER_S \
+     + (ns) * FILE_TIMESTAMPS_PER_S / 1000000000)
+#define FILE_TIMESTAMP_DIV(a, b) ((a)/(b) - ((a)%(b) < 0))
+#define FILE_TIMESTAMP_MOD(a, b) ((a)%(b) + ((a)%(b) < 0) * (b))
+#define FILE_TIMESTAMP_S(ts) FILE_TIMESTAMP_DIV ((ts), FILE_TIMESTAMPS_PER_S)
+#define FILE_TIMESTAMP_NS(ts) \
+    (((FILE_TIMESTAMP_MOD ((ts), FILE_TIMESTAMPS_PER_S) * 1000000000) \
+       + (FILE_TIMESTAMPS_PER_S - 1)) \
+      / FILE_TIMESTAMPS_PER_S)
+
+/* Upper bound on length of string "YYYY-MM-DD HH:MM:SS.NNNNNNNNN"
+   representing a file timestamp.  The upper bound is not necessarily 19,
+   since the year might be less than -999 or greater than 9999.
+
+   Subtract one for the sign bit if in case file timestamps can be negative;
+   subtract FLOOR_LOG2_SECONDS_PER_YEAR to yield an upper bound on how many
+   file timestamp bits might affect the year;
+   302 / 1000 is log10 (2) rounded up;
+   add one for integer division truncation;
+   add one more for a minus sign if file timestamps can be negative;
+   add 4 to allow for any 4-digit epoch year (e.g. 1970);
+   add 25 to allow for "-MM-DD HH:MM:SS.NNNNNNNNN".  */
+#define FLOOR_LOG2_SECONDS_PER_YEAR 24
+#define FILE_TIMESTAMP_PRINT_LEN_BOUND \
+  (((sizeof (FILE_TIMESTAMP) * CHAR_BIT - 1 - FLOOR_LOG2_SECONDS_PER_YEAR) \
+    * 302 / 1000) \
+   + 1 + 1 + 4 + 25)
+
+extern FILE_TIMESTAMP file_timestamp_now PARAMS ((void));
+extern void file_timestamp_sprintf PARAMS ((char *p, FILE_TIMESTAMP ts));
+
+/* Return the mtime of file F (a struct file *), caching it.
+   The value is -1 if the file does not exist.  */
+#define file_mtime(f) file_mtime_1 ((f), 1)
+/* Return the mtime of file F (a struct file *), caching it.
+   Don't search using vpath for the file--if it doesn't actually exist,
+   we don't find it.
+   The value is -1 if the file does not exist.  */
+#define file_mtime_no_search(f) file_mtime_1 ((f), 0)
+extern FILE_TIMESTAMP f_mtime PARAMS ((struct file *file, int search));
+#define file_mtime_1(f, v) \
+  ((f)->last_mtime ? (f)->last_mtime : f_mtime ((f), v))
+
+/* Modtime value to use for `infinitely new'.  We used to get the current time
+   from the system and use that whenever we wanted `new'.  But that causes
+   trouble when the machine running make and the machine holding a file have
+   different ideas about what time it is; and can also lose for `force'
+   targets, which need to be considered newer than anything that depends on
+   them, even if said dependents' modtimes are in the future.
+
+   If FILE_TIMESTAMP is unsigned, its maximum value is the same as
+   ((FILE_TIMESTAMP) -1), so use one less than that, because -1 is
+   used for non-existing files.  */
+#define NEW_MTIME \
+     (INTEGER_TYPE_SIGNED (FILE_TIMESTAMP) \
+      ? INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP) \
+      : (INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP) - 1))
+
+#define check_renamed(file) \
+  while ((file)->renamed != 0) (file) = (file)->renamed /* No ; here.  */

getopt.h

@@ -0,0 +1,133 @@
+/* Declarations for getopt.
+   Copyright (C) 1989,90,91,92,93,94,96,97 Free Software Foundation, Inc.
+
+   NOTE: The canonical source of this file is maintained with the GNU C Library.
+   Bugs can be reported to bug-glibc@gnu.org.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifndef _GETOPT_H
+#define _GETOPT_H 1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+   for unrecognized options.  */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized.  */
+
+extern int optopt;
+
+/* Describe the long-named options requested by the application.
+   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+   of `struct option' terminated by an element containing a name which is
+   zero.
+
+   The field `has_arg' is:
+   no_argument		(or 0) if the option does not take an argument,
+   required_argument	(or 1) if the option requires an argument,
+   optional_argument 	(or 2) if the option takes an optional argument.
+
+   If the field `flag' is not NULL, it points to a variable that is set
+   to the value given in the field `val' when the option is found, but
+   left unchanged if the option is not found.
+
+   To have a long-named option do something other than set an `int' to
+   a compiled-in constant, such as set a value from `optarg', set the
+   option's `flag' field to zero and its `val' field to a nonzero
+   value (the equivalent single-letter option character, if there is
+   one).  For long options that have a zero `flag' field, `getopt'
+   returns the contents of the `val' field.  */
+
+struct option
+{
+#if defined (__STDC__) && __STDC__
+  const char *name;
+#else
+  char *name;
+#endif
+  /* has_arg can't be an enum because some compilers complain about
+     type mismatches in all the code that assumes it is an int.  */
+  int has_arg;
+  int *flag;
+  int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'.  */
+
+#define	no_argument		0
+#define required_argument	1
+#define optional_argument	2
+
+#if defined (__STDC__) && __STDC__
+#ifdef __GNU_LIBRARY__
+/* Many other libraries have conflicting prototypes for getopt, with
+   differences in the consts, in stdlib.h.  To avoid compilation
+   errors, only prototype getopt for the GNU C library.  */
+extern int getopt (int argc, char *const *argv, const char *shortopts);
+#else /* not __GNU_LIBRARY__ */
+extern int getopt ();
+#endif /* __GNU_LIBRARY__ */
+extern int getopt_long (int argc, char *const *argv, const char *shortopts,
+		        const struct option *longopts, int *longind);
+extern int getopt_long_only (int argc, char *const *argv,
+			     const char *shortopts,
+		             const struct option *longopts, int *longind);
+
+/* Internal only.  Users should not call this directly.  */
+extern int _getopt_internal (int argc, char *const *argv,
+			     const char *shortopts,
+		             const struct option *longopts, int *longind,
+			     int long_only);
+#else /* not __STDC__ */
+extern int getopt ();
+extern int getopt_long ();
+extern int getopt_long_only ();
+
+extern int _getopt_internal ();
+#endif /* __STDC__ */
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* getopt.h */

getopt1.c

@@ -0,0 +1,190 @@
+/* getopt_long and getopt_long_only entry points for GNU getopt.
+   Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
+     Free Software Foundation, Inc.
+
+   NOTE: The canonical source of this file is maintained with the GNU C Library.
+   Bugs can be reported to bug-glibc@prep.ai.mit.edu.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "getopt.h"
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+   reject `defined (const)'.  */
+#ifndef const
+#define const
+#endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+#include <gnu-versions.h>
+#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#define ELIDE_CODE
+#endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
+#endif
+
+#ifndef	NULL
+#define NULL 0
+#endif
+
+int
+getopt_long (argc, argv, options, long_options, opt_index)
+     int argc;
+     char *const *argv;
+     const char *options;
+     const struct option *long_options;
+     int *opt_index;
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
+}
+
+/* Like getopt_long, but '-' as well as '--' can indicate a long option.
+   If an option that starts with '-' (not '--') doesn't match a long option,
+   but does match a short option, it is parsed as a short option
+   instead.  */
+
+int
+getopt_long_only (argc, argv, options, long_options, opt_index)
+     int argc;
+     char *const *argv;
+     const char *options;
+     const struct option *long_options;
+     int *opt_index;
+{
+  return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
+}
+
+
+#endif	/* Not ELIDE_CODE.  */
+
+#ifdef TEST
+
+#include <stdio.h>
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int c;
+  int digit_optind = 0;
+
+  while (1)
+    {
+      int this_option_optind = optind ? optind : 1;
+      int option_index = 0;
+      static struct option long_options[] =
+      {
+	{"add", 1, 0, 0},
+	{"append", 0, 0, 0},
+	{"delete", 1, 0, 0},
+	{"verbose", 0, 0, 0},
+	{"create", 0, 0, 0},
+	{"file", 1, 0, 0},
+	{0, 0, 0, 0}
+      };
+
+      c = getopt_long (argc, argv, "abc:d:0123456789",
+		       long_options, &option_index);
+      if (c == -1)
+	break;
+
+      switch (c)
+	{
+	case 0:
+	  printf ("option %s", long_options[option_index].name);
+	  if (optarg)
+	    printf (" with arg %s", optarg);
+	  printf ("\n");
+	  break;
+
+	case '0':
+	case '1':
+	case '2':
+	case '3':
+	case '4':
+	case '5':
+	case '6':
+	case '7':
+	case '8':
+	case '9':
+	  if (digit_optind != 0 && digit_optind != this_option_optind)
+	    printf ("digits occur in two different argv-elements.\n");
+	  digit_optind = this_option_optind;
+	  printf ("option %c\n", c);
+	  break;
+
+	case 'a':
+	  printf ("option a\n");
+	  break;
+
+	case 'b':
+	  printf ("option b\n");
+	  break;
+
+	case 'c':
+	  printf ("option c with value `%s'\n", optarg);
+	  break;
+
+	case 'd':
+	  printf ("option d with value `%s'\n", optarg);
+	  break;
+
+	case '?':
+	  break;
+
+	default:
+	  printf ("?? getopt returned character code 0%o ??\n", c);
+	}
+    }
+
+  if (optind < argc)
+    {
+      printf ("non-option ARGV-elements: ");
+      while (optind < argc)
+	printf ("%s ", argv[optind++]);
+      printf ("\n");
+    }
+
+  exit (0);
+}
+
+#endif /* TEST */

glob/.cvsignore

@@ -0,0 +1 @@
+.deps Makefile.in

glob/ChangeLog

@@ -0,0 +1,130 @@
+1999-09-12  Paul D. Smith  <psmith@gnu.org>
+
+	* fnmatch.c: Last GLIBC version wouldn't compile outside of GLIBC
+	(undefined reference to internal_function).  Update to the latest
+	version
+
+1999-09-11  Paul Eggert  <eggert@twinsun.com>
+
+	* glob.h (glob): If #defining to glob64, do this before
+	declaring it, so that all declarations and uses match, and
+	do not declare glob64, to avoid a declaration clash.
+	(globfree): Likewise with globfree64.
+
+1999-09-08  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* glob.c (prefix_array) [__MSDOS__,WINDOWS32]: Keep the trailing
+	slash unless DIRNAME is just "x:/".
+
+1999-09-06  Paul D. Smith  <psmith@gnu.org>
+
+	* fnmatch.c: Update to latest version from GLIBC.
+
+1999-07-21  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, glob.h, fnmatch.c, fnmatch.h: Update to latest version
+	from GLIBC.
+
+	* fnmatch.c (internal_fnmatch): Use K&R definition syntax, not ANSI.
+	(__strchrnul): This won't exist outside GLIBC, so create one.
+
+	* glob.c: Move getlogin{,_r} prototypes below glob.h to get __P()
+	macro.
+
+1998-08-05  Paul D. Smith  <psmith@gnu.org>
+
+	* configure.in: Remove; configuration for glob is handled by the
+	make configure.in.
+
+1998-07-29  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, fnmatch.c: New versions from the GLIBC folks (Ulrich
+	Drepper).  Fixes a bug reported by Eli Zaretski.  Integrates
+	DOS/Windows32 support.
+
+1998-07-27  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
+
+	* glob.c (glob): Cast away const on assignment of pattern to dirname.
+	Cast the return type of __alloca() for traditional C compilers.
+
+1998-07-23  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c, fnmatch.c: New versions of these files from the GLIBC
+	folks (Ulrich Drepper).  Had to re-integrate some DOS/Windows
+	code.
+
+1998-07-10  Paul D. Smith  <psmith@gnu.org>
+
+	* glob.c (glob_in_dir): If no meta chars exist in PATTERN and
+	GLOB_NOCHECK is present, don't look for the file--whether it's
+	found or not, we'll always return it, so why bother searching?
+
+	Also, if we are searching and there are no meta chars, don't
+	bother trying fnmatch() if the strcmp() fails.
+
+1998-05-30  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* glob.c (glob) [__MSDOS__, WINDOWS32]: Compute the directory and
+	filename parts of the pattern correctly when it includes a drive
+	spec.  Disallow wildcards in the drive spec.  Prevent recursion
+	when dirname is of the form "d:/" or "d:".
+	(prefix_array) [__MSDOS__, WINDOWS32]: Don't append a slash to
+	"d:/" and "d:".
+
+1998-05-13  Paul D. Smith  <psmith@gnu.org>
+
+	* SMakefile, Makefile.ami, glob.c, glob.h, fnmatch.c: Updated from
+	the latest glibc version.
+
+1998-04-17  Paul D. Smith  <psmith@gnu.org>
+
+	* configure.in: Create a config.h file instead of setting things
+	on the compile line.  This is because when build.sh runs it merely
+	passes -DHAVE_CONFIG_H to the glob files, just as it does to the
+	make files.
+	* config.h.in: Created by autoheader.
+
+Tue Aug 12 10:52:34 1997  Paul D. Smith  <psmith@baynetworks.com>
+
+	* configure.in: Require autoconf 2.12.
+
+	* glob: Updates from latest GNU libc glob code.
+
+	* glob.c,glob.h,fnmatch.h: Change all WIN32 references to WINDOWS32.
+
+	* glob.h: OSF4 defines macros in such a way that GLOB_ALTDIRFUNC
+	is not defined.  Added a test to the #if which defines it if
+	_GNU_SOURCE is defined; that's set by both glob.c and GNU make.
+
+	* glob.c: SunOS4 w/ cc needs #include <stdio.h>, since assert.h
+	requires stderr but doesn't include stdio.h :-/.
+	(next_brace_sub): De-protoize function definition.
+	(glob): Cast __alloca(); on SunOS4 it uses the default return type
+	of int.
+	(glob): Irix defines getlogin_r() to return a char*; move the
+	extern for that into the _LIBC area since it isn't used except in
+	LIBC anyway.  Likewise, move extern getlogin() into the "else".
+
+Sat Jul 20 21:55:31 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	Win32 hacks from <Rob_Tulloh@tivoli.com>.
+	* posix/glob.c [WIN32]: Don't include <pwd.h>; don't use d_ino;
+	use void * for my_realloc; include <malloc.h> for alloca.
+	(glob) [WIN32]: Use "c:/users/default" for ~ if no HOME variable.
+	* posix/fnmatch.h [WIN32]: Use prototypes even if [!__STDC__].
+	* posix/glob.h: Likewise.
+
+Fri Jul 19 16:56:41 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/glob.h [!_AMIGA && !VMS]: Check this instead of just [!_AMIGA]
+	for `struct stat;' forward decl.
+
+Sat Jun 22 10:44:09 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/glob.c: Include <alloca.h> only [HAVE_ALLOCA_H], not [sparc].
+
+Fri Jun 21 00:27:51 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
+
+	* posix/fnmatch.c (fnmatch): Fix \*[*?]+ case to increment name ptr
+ 	only for ?s, not for *s.  Fix from Chet Ramey.
+

glob/Makefile.am

@@ -0,0 +1,10 @@
+# -*-Makefile-*-, or close enough
+
+AUTOMAKE_OPTIONS =	1.4 foreign
+
+noinst_LIBRARIES =	libglob.a
+
+libglob_a_SOURCES =	glob.c glob.h fnmatch.c fnmatch.h
+
+EXTRA_DIST =		COPYING.LIB Makefile.ami SCOPTIONS SMakefile \
+			configure.bat

glob/Makefile.ami

@@ -0,0 +1,69 @@
+# Makefile for standalone distribution of libglob.a (fnmatch, glob).
+
+# Copyright (C) 1991, 92, 93, 94, 95, 97, 98 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public License
+# as published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+# Library General Public License for more details.
+
+# You should have received a copy of the GNU Library General Public
+# License along with this library; see the file COPYING.LIB.  If
+# not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /glob/
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = /glob/
+
+CC = sc
+RM = delete
+CPPFLAGS =
+CFLAGS =
+
+# Information determined by configure.
+DEFS = Define HAVE_HEADER_STDC Define HAVE_UNISTD_H Define HAVE_STRING_H \
+	Define HAVE_DIRENT_H
+
+# How to invoke ar.
+AR = join
+ARFLAGS = as
+
+# How to invoke ranlib.
+RANLIB = ;
+
+.PHONY: all
+all: glob.lib
+
+glob.lib : glob.o fnmatch.o
+	$(AR) $(ARFLAGS) $@ glob.o fnmatch.o
+	$(RANLIB) $@
+
+# For some reason, Unix make wants the dependencies on the source files.
+# Otherwise it refuses to use an implicit rule!
+# And, get this: it doesn't work to use $(srcdir)foo.c!!
+glob.o: $(srcdir)glob.h $(srcdir)fnmatch.h glob.c
+fnmatch.o: $(srcdir)fnmatch.h fnmatch.c
+
+OUTPUT_OPTION =
+.c.o:
+	$(CC) IDir "" \
+	      $(DEFS) $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+.PHONY: clean realclean glob-clean glob-realclean distclean
+clean glob-clean:
+	-$(RM) glob.lib "#?.o" core
+distclean glob-realclean: clean
+	-$(RM) TAGS tags Makefile config.status config.h config.log
+realcean: distclean
+
+# For inside the C library.
+glob.tar glob.tar.Z:
+	$(MAKE) -C .. $@

glob/SCOPTIONS

@@ -0,0 +1,13 @@
+ERRORREXX
+OPTIMIZE
+NOVERSION
+OPTIMIZERTIME
+OPTIMIZERALIAS
+DEFINE INCLUDEDIR="include:"
+DEFINE LIBDIR="lib:"
+DEFINE NO_ALLOCA
+DEFINE NO_FLOAT
+DEFINE NO_ARCHIVES
+IGNORE=161
+IGNORE=100
+STARTUP=cres

glob/SMakefile

@@ -0,0 +1,69 @@
+# Makefile for standalone distribution of libglob.a (fnmatch, glob).
+
+# Copyright (C) 1991, 92, 93, 94, 95, 97, 98 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public License
+# as published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+# Library General Public License for more details.
+
+# You should have received a copy of the GNU Library General Public
+# License along with this library; see the file COPYING.LIB.  If
+# not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = /glob/
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = /glob/
+
+CC = sc
+CPPFLAGS =
+CFLAGS =
+MAKE = smake
+RM = delete
+
+# Information determined by configure.
+DEFS = Define HAVE_HEADER_STDC Define HAVE_UNISTD_H Define HAVE_STRING_H \
+	Define HAVE_DIRENT_H
+
+# How to invoke ar.
+AR = join
+ARFLAGS = as
+
+# How to invoke ranlib.
+RANLIB = ;
+
+.PHONY: all
+all: glob.lib
+
+glob.lib : glob.o fnmatch.o
+	$(AR) $(ARFLAGS) $@ glob.o fnmatch.o
+	$(RANLIB) $@
+
+# For some reason, Unix make wants the dependencies on the source files.
+# Otherwise it refuses to use an implicit rule!
+# And, get this: it doesn't work to use $(srcdir)foo.c!!
+glob.o: $(srcdir)glob.h $(srcdir)fnmatch.h glob.c
+fnmatch.o: $(srcdir)fnmatch.h fnmatch.c
+
+.c.o:
+	$(CC) IDir "" \
+	      $(DEFS) $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+.PHONY: clean realclean glob-clean glob-realclean distclean
+clean glob-clean:
+	-$(RM) -f glob.lib *.o core
+distclean glob-realclean: clean
+	-$(RM) -f TAGS tags Makefile config.status config.h config.log
+realcean: distclean
+
+# For inside the C library.
+glob.tar glob.tar.Z:
+	$(MAKE) -C .. $@

glob/configure.bat

@@ -0,0 +1,26 @@
+@echo off
+echo Configuring glob for DJGPP
+rem This batch file assumes a unix-type "sed" program
+
+echo # Makefile generated by "configure.bat"> Makefile
+
+if exist config.sed del config.sed
+
+echo "s/@srcdir@/./					">> config.sed
+echo "s/@CC@/gcc/					">> config.sed
+echo "s/@CFLAGS@/-O2 -g/				">> config.sed
+echo "s/@CPPFLAGS@/-DHAVE_CONFIG_H -I../		">> config.sed
+echo "s/@AR@/ar/					">> config.sed
+echo "s/@RANLIB@/ranlib/				">> config.sed
+echo "s/@LDFLAGS@//					">> config.sed
+echo "s/@DEFS@//					">> config.sed
+echo "s/@ALLOCA@//					">> config.sed
+echo "s/@LIBS@//					">> config.sed
+echo "s/@LIBOBJS@//					">> config.sed
+echo "s/^Makefile *:/_Makefile:/			">> config.sed
+echo "s/^config.h *:/_config.h:/			">> config.sed
+
+sed -e "s/^\"//" -e "s/\"$//" -e "s/[ 	]*$//" config.sed > config2.sed
+sed -f config2.sed Makefile.in >> Makefile
+del config.sed
+del config2.sed

glob/fnmatch.c

@@ -0,0 +1,488 @@
+/* Copyright (C) 1991, 92, 93, 96, 97, 98, 99 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Enable GNU extensions in fnmatch.h.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#include <errno.h>
+#include <fnmatch.h>
+#include <ctype.h>
+
+#if HAVE_STRING_H || defined _LIBC
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+
+#if defined STDC_HEADERS || defined _LIBC
+# include <stdlib.h>
+#endif
+
+/* For platform which support the ISO C amendement 1 functionality we
+   support user defined character classes.  */
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+# include <wchar.h>
+# include <wctype.h>
+#endif
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#if defined _LIBC || !defined __GNU_LIBRARY__
+
+
+# if defined STDC_HEADERS || !defined isascii
+#  define ISASCII(c) 1
+# else
+#  define ISASCII(c) isascii(c)
+# endif
+
+# ifdef isblank
+#  define ISBLANK(c) (ISASCII (c) && isblank (c))
+# else
+#  define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+# endif
+# ifdef isgraph
+#  define ISGRAPH(c) (ISASCII (c) && isgraph (c))
+# else
+#  define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
+# endif
+
+# define ISPRINT(c) (ISASCII (c) && isprint (c))
+# define ISDIGIT(c) (ISASCII (c) && isdigit (c))
+# define ISALNUM(c) (ISASCII (c) && isalnum (c))
+# define ISALPHA(c) (ISASCII (c) && isalpha (c))
+# define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
+# define ISLOWER(c) (ISASCII (c) && islower (c))
+# define ISPUNCT(c) (ISASCII (c) && ispunct (c))
+# define ISSPACE(c) (ISASCII (c) && isspace (c))
+# define ISUPPER(c) (ISASCII (c) && isupper (c))
+# define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+
+# define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* The GNU C library provides support for user-defined character classes
+   and the functions from ISO C amendement 1.  */
+#  ifdef CHARCLASS_NAME_MAX
+#   define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
+#  else
+/* This shouldn't happen but some implementation might still have this
+   problem.  Use a reasonable default value.  */
+#   define CHAR_CLASS_MAX_LENGTH 256
+#  endif
+
+#  ifdef _LIBC
+#   define IS_CHAR_CLASS(string) __wctype (string)
+#  else
+#   define IS_CHAR_CLASS(string) wctype (string)
+#  endif
+# else
+#  define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
+
+#  define IS_CHAR_CLASS(string)						      \
+   (STREQ (string, "alpha") || STREQ (string, "upper")			      \
+    || STREQ (string, "lower") || STREQ (string, "digit")		      \
+    || STREQ (string, "alnum") || STREQ (string, "xdigit")		      \
+    || STREQ (string, "space") || STREQ (string, "print")		      \
+    || STREQ (string, "punct") || STREQ (string, "graph")		      \
+    || STREQ (string, "cntrl") || STREQ (string, "blank"))
+# endif
+
+/* Avoid depending on library functions or files
+   whose names are inconsistent.  */
+
+# if !defined _LIBC && !defined getenv
+extern char *getenv ();
+# endif
+
+# ifndef errno
+extern int errno;
+# endif
+
+/* This function doesn't exist on most systems.  */
+
+# if !defined HAVE___STRCHRNUL && !defined _LIBC
+static char *
+__strchrnul (s, c)
+     const char *s;
+     int c;
+{
+  char *result = strchr (s, c);
+  if (result == NULL)
+    result = strchr (s, '\0');
+  return result;
+}
+# endif
+
+# ifndef internal_function
+/* Inside GNU libc we mark some function in a special way.  In other
+   environments simply ignore the marking.  */
+#  define internal_function
+# endif
+
+/* Match STRING against the filename pattern PATTERN, returning zero if
+   it matches, nonzero if not.  */
+static int internal_fnmatch __P ((const char *pattern, const char *string,
+				  int no_leading_period, int flags))
+     internal_function;
+static int
+internal_function
+internal_fnmatch (pattern, string, no_leading_period, flags)
+     const char *pattern;
+     const char *string;
+     int no_leading_period;
+     int flags;
+{
+  register const char *p = pattern, *n = string;
+  register unsigned char c;
+
+/* Note that this evaluates C many times.  */
+# ifdef _LIBC
+#  define FOLD(c) ((flags & FNM_CASEFOLD) ? tolower (c) : (c))
+# else
+#  define FOLD(c) ((flags & FNM_CASEFOLD) && ISUPPER (c) ? tolower (c) : (c))
+# endif
+
+  while ((c = *p++) != '\0')
+    {
+      c = FOLD (c);
+
+      switch (c)
+	{
+	case '?':
+	  if (*n == '\0')
+	    return FNM_NOMATCH;
+	  else if (*n == '/' && (flags & FNM_FILE_NAME))
+	    return FNM_NOMATCH;
+	  else if (*n == '.' && no_leading_period
+		   && (n == string
+		       || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+	  break;
+
+	case '\\':
+	  if (!(flags & FNM_NOESCAPE))
+	    {
+	      c = *p++;
+	      if (c == '\0')
+		/* Trailing \ loses.  */
+		return FNM_NOMATCH;
+	      c = FOLD (c);
+	    }
+	  if (FOLD ((unsigned char) *n) != c)
+	    return FNM_NOMATCH;
+	  break;
+
+	case '*':
+	  if (*n == '.' && no_leading_period
+	      && (n == string
+		  || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+
+	  for (c = *p++; c == '?' || c == '*'; c = *p++)
+	    {
+	      if (*n == '/' && (flags & FNM_FILE_NAME))
+		/* A slash does not match a wildcard under FNM_FILE_NAME.  */
+		return FNM_NOMATCH;
+	      else if (c == '?')
+		{
+		  /* A ? needs to match one character.  */
+		  if (*n == '\0')
+		    /* There isn't another character; no match.  */
+		    return FNM_NOMATCH;
+		  else
+		    /* One character of the string is consumed in matching
+		       this ? wildcard, so *??? won't match if there are
+		       less than three characters.  */
+		    ++n;
+		}
+	    }
+
+	  if (c == '\0')
+	    /* The wildcard(s) is/are the last element of the pattern.
+	       If the name is a file name and contains another slash
+	       this does mean it cannot match.  */
+	    return ((flags & FNM_FILE_NAME) && strchr (n, '/') != NULL
+		    ? FNM_NOMATCH : 0);
+	  else
+	    {
+	      const char *endp;
+
+	      endp = __strchrnul (n, (flags & FNM_FILE_NAME) ? '/' : '\0');
+
+	      if (c == '[')
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  for (--p; n < endp; ++n)
+		    if (internal_fnmatch (p, n,
+					  (no_leading_period
+					   && (n == string
+					       || (n[-1] == '/'
+						   && (flags
+						       & FNM_FILE_NAME)))),
+					  flags2)
+			== 0)
+		      return 0;
+		}
+	      else if (c == '/' && (flags & FNM_FILE_NAME))
+		{
+		  while (*n != '\0' && *n != '/')
+		    ++n;
+		  if (*n == '/'
+		      && (internal_fnmatch (p, n + 1, flags & FNM_PERIOD,
+					    flags) == 0))
+		    return 0;
+		}
+	      else
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  if (c == '\\' && !(flags & FNM_NOESCAPE))
+		    c = *p;
+		  c = FOLD (c);
+		  for (--p; n < endp; ++n)
+		    if (FOLD ((unsigned char) *n) == c
+			&& (internal_fnmatch (p, n,
+					      (no_leading_period
+					       && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME)))),
+					      flags2) == 0))
+		      return 0;
+		}
+	    }
+
+	  /* If we come here no match is possible with the wildcard.  */
+	  return FNM_NOMATCH;
+
+	case '[':
+	  {
+	    /* Nonzero if the sense of the character class is inverted.  */
+	    static int posixly_correct;
+	    register int not;
+	    char cold;
+
+	    if (posixly_correct == 0)
+	      posixly_correct = getenv ("POSIXLY_CORRECT") != NULL ? 1 : -1;
+
+	    if (*n == '\0')
+	      return FNM_NOMATCH;
+
+	    if (*n == '.' && no_leading_period && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME))))
+	      return FNM_NOMATCH;
+
+	    if (*n == '/' && (flags & FNM_FILE_NAME))
+	      /* `/' cannot be matched.  */
+	      return FNM_NOMATCH;
+
+	    not = (*p == '!' || (posixly_correct < 0 && *p == '^'));
+	    if (not)
+	      ++p;
+
+	    c = *p++;
+	    for (;;)
+	      {
+		unsigned char fn = FOLD ((unsigned char) *n);
+
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    c = FOLD ((unsigned char) *p);
+		    ++p;
+
+		    if (c == fn)
+		      goto matched;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    /* Leave room for the null.  */
+		    char str[CHAR_CLASS_MAX_LENGTH + 1];
+		    size_t c1 = 0;
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wctype_t wt;
+# endif
+		    const char *startp = p;
+
+		    for (;;)
+		      {
+			if (c1 == CHAR_CLASS_MAX_LENGTH)
+			  /* The name is too long and therefore the pattern
+			     is ill-formed.  */
+			  return FNM_NOMATCH;
+
+			c = *++p;
+			if (c == ':' && p[1] == ']')
+			  {
+			    p += 2;
+			    break;
+			  }
+			if (c < 'a' || c >= 'z')
+			  {
+			    /* This cannot possibly be a character class name.
+			       Match it as a normal range.  */
+			    p = startp;
+			    c = '[';
+			    goto normal_bracket;
+			  }
+			str[c1++] = c;
+		      }
+		    str[c1] = '\0';
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wt = IS_CHAR_CLASS (str);
+		    if (wt == 0)
+		      /* Invalid character class name.  */
+		      return FNM_NOMATCH;
+
+		    if (__iswctype (__btowc ((unsigned char) *n), wt))
+		      goto matched;
+# else
+		    if ((STREQ (str, "alnum") && ISALNUM ((unsigned char) *n))
+			|| (STREQ (str, "alpha") && ISALPHA ((unsigned char) *n))
+			|| (STREQ (str, "blank") && ISBLANK ((unsigned char) *n))
+			|| (STREQ (str, "cntrl") && ISCNTRL ((unsigned char) *n))
+			|| (STREQ (str, "digit") && ISDIGIT ((unsigned char) *n))
+			|| (STREQ (str, "graph") && ISGRAPH ((unsigned char) *n))
+			|| (STREQ (str, "lower") && ISLOWER ((unsigned char) *n))
+			|| (STREQ (str, "print") && ISPRINT ((unsigned char) *n))
+			|| (STREQ (str, "punct") && ISPUNCT ((unsigned char) *n))
+			|| (STREQ (str, "space") && ISSPACE ((unsigned char) *n))
+			|| (STREQ (str, "upper") && ISUPPER ((unsigned char) *n))
+			|| (STREQ (str, "xdigit") && ISXDIGIT ((unsigned char) *n)))
+		      goto matched;
+# endif
+		  }
+		else if (c == '\0')
+		  /* [ (unterminated) loses.  */
+		  return FNM_NOMATCH;
+		else
+		  {
+		  normal_bracket:
+		    if (FOLD (c) == fn)
+		      goto matched;
+
+		    cold = c;
+		    c = *p++;
+
+		    if (c == '-' && *p != ']')
+		      {
+			/* It is a range.  */
+			unsigned char cend = *p++;
+			if (!(flags & FNM_NOESCAPE) && cend == '\\')
+			  cend = *p++;
+			if (cend == '\0')
+			  return FNM_NOMATCH;
+
+			if (cold <= fn && fn <= FOLD (cend))
+			  goto matched;
+
+			c = *p++;
+		      }
+		  }
+
+		if (c == ']')
+		  break;
+	      }
+
+	    if (!not)
+	      return FNM_NOMATCH;
+	    break;
+
+	  matched:
+	    /* Skip the rest of the [...] that already matched.  */
+	    while (c != ']')
+	      {
+		if (c == '\0')
+		  /* [... (unterminated) loses.  */
+		  return FNM_NOMATCH;
+
+		c = *p++;
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    /* XXX 1003.2d11 is unclear if this is right.  */
+		    ++p;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    do
+		      if (*++p == '\0')
+			return FNM_NOMATCH;
+		    while (*p != ':' || p[1] == ']');
+		    p += 2;
+		    c = *p;
+		  }
+	      }
+	    if (not)
+	      return FNM_NOMATCH;
+	  }
+	  break;
+
+	default:
+	  if (c != FOLD ((unsigned char) *n))
+	    return FNM_NOMATCH;
+	}
+
+      ++n;
+    }
+
+  if (*n == '\0')
+    return 0;
+
+  if ((flags & FNM_LEADING_DIR) && *n == '/')
+    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
+    return 0;
+
+  return FNM_NOMATCH;
+
+# undef FOLD
+}
+
+
+int
+fnmatch (pattern, string, flags)
+     const char *pattern;
+     const char *string;
+     int flags;
+{
+  return internal_fnmatch (pattern, string, flags & FNM_PERIOD, flags);
+}
+
+#endif	/* _LIBC or not __GNU_LIBRARY__.  */

glob/fnmatch.h

@@ -0,0 +1,84 @@
+/* Copyright (C) 1991, 92, 93, 96, 97, 98, 99 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef	_FNMATCH_H
+#define	_FNMATCH_H	1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__ || !defined __P
+#  undef	__P
+#  define __P(protos)	protos
+# endif
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# define __P(protos)	()
+/* We can get away without defining `const' here only because in this file
+   it is used only inside the prototype for `fnmatch', which is elided in
+   non-ANSI C where `const' is problematical.  */
+#endif /* C++ or ANSI C.  */
+
+#ifndef const
+# if (defined __STDC__ && __STDC__) || defined __cplusplus
+#  define __const	const
+# else
+#  define __const
+# endif
+#endif
+
+/* We #undef these before defining them because some losing systems
+   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
+#undef	FNM_PATHNAME
+#undef	FNM_NOESCAPE
+#undef	FNM_PERIOD
+
+/* Bits set in the FLAGS argument to `fnmatch'.  */
+#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
+#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
+#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
+
+#if !defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _GNU_SOURCE
+# define FNM_FILE_NAME	 FNM_PATHNAME	/* Preferred GNU name.  */
+# define FNM_LEADING_DIR (1 << 3)	/* Ignore `/...' after a match.  */
+# define FNM_CASEFOLD	 (1 << 4)	/* Compare without regard to case.  */
+#endif
+
+/* Value returned by `fnmatch' if STRING does not match PATTERN.  */
+#define	FNM_NOMATCH	1
+
+/* This value is returned if the implementation does not support
+   `fnmatch'.  Since this is not the case here it will never be
+   returned but the conformance test suites still require the symbol
+   to be defined.  */
+#ifdef _XOPEN_SOURCE
+# define FNM_NOSYS	(-1)
+#endif
+
+/* Match NAME against the filename pattern PATTERN,
+   returning zero if it matches, FNM_NOMATCH if not.  */
+extern int fnmatch __P ((__const char *__pattern, __const char *__name,
+			 int __flags));
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* fnmatch.h */

glob/glob.h

@@ -0,0 +1,193 @@
+/* Copyright (C) 1991, 92, 95, 96, 97, 98 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef	_GLOB_H
+#define	_GLOB_H	1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#undef	__ptr_t
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__ || !defined __P
+#  undef __P
+#  undef __PMT
+#  define __P(protos)	protos
+#  define __PMT(protos)	protos
+#  if !defined __GNUC__ || __GNUC__ < 2
+#   undef __const
+#   define __const const
+#  endif
+# endif
+# define __ptr_t	void *
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# undef __PMT
+# define __P(protos)	()
+# define __PMT(protos)	()
+# undef	__const
+# define __const
+# define __ptr_t	char *
+#endif /* C++ or ANSI C.  */
+
+/* We need `size_t' for the following definitions.  */
+#ifndef __size_t
+# if defined __GNUC__ && __GNUC__ >= 2
+typedef __SIZE_TYPE__ __size_t;
+# else
+/* This is a guess.  */
+typedef unsigned long int __size_t;
+# endif
+#else
+/* The GNU CC stddef.h version defines __size_t as empty.  We need a real
+   definition.  */
+# undef __size_t
+# define __size_t size_t
+#endif
+
+/* Bits set in the FLAGS argument to `glob'.  */
+#define	GLOB_ERR	(1 << 0)/* Return on read errors.  */
+#define	GLOB_MARK	(1 << 1)/* Append a slash to each name.  */
+#define	GLOB_NOSORT	(1 << 2)/* Don't sort the names.  */
+#define	GLOB_DOOFFS	(1 << 3)/* Insert PGLOB->gl_offs NULLs.  */
+#define	GLOB_NOCHECK	(1 << 4)/* If nothing matches, return the pattern.  */
+#define	GLOB_APPEND	(1 << 5)/* Append to results of a previous call.  */
+#define	GLOB_NOESCAPE	(1 << 6)/* Backslashes don't quote metacharacters.  */
+#define	GLOB_PERIOD	(1 << 7)/* Leading `.' can be matched by metachars.  */
+
+#if (!defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _BSD_SOURCE \
+     || defined _GNU_SOURCE)
+# define GLOB_MAGCHAR	 (1 << 8)/* Set in gl_flags if any metachars seen.  */
+# define GLOB_ALTDIRFUNC (1 << 9)/* Use gl_opendir et al functions.  */
+# define GLOB_BRACE	 (1 << 10)/* Expand "{a,b}" to "a" "b".  */
+# define GLOB_NOMAGIC	 (1 << 11)/* If no magic chars, return the pattern.  */
+# define GLOB_TILDE	 (1 << 12)/* Expand ~user and ~ to home directories. */
+# define GLOB_ONLYDIR	 (1 << 13)/* Match only directories.  */
+# define GLOB_TILDE_CHECK (1 << 14)/* Like GLOB_TILDE but return an error
+				      if the user name is not available.  */
+# define __GLOB_FLAGS	(GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
+			 GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND|     \
+			 GLOB_PERIOD|GLOB_ALTDIRFUNC|GLOB_BRACE|     \
+			 GLOB_NOMAGIC|GLOB_TILDE|GLOB_ONLYDIR|GLOB_TILDE_CHECK)
+#else
+# define __GLOB_FLAGS	(GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
+			 GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND|     \
+			 GLOB_PERIOD)
+#endif
+
+/* Error returns from `glob'.  */
+#define	GLOB_NOSPACE	1	/* Ran out of memory.  */
+#define	GLOB_ABORTED	2	/* Read error.  */
+#define	GLOB_NOMATCH	3	/* No matches found.  */
+#define GLOB_NOSYS	4	/* Not implemented.  */
+#ifdef _GNU_SOURCE
+/* Previous versions of this file defined GLOB_ABEND instead of
+   GLOB_ABORTED.  Provide a compatibility definition here.  */
+# define GLOB_ABEND GLOB_ABORTED
+#endif
+
+/* Structure describing a globbing run.  */
+#if !defined _AMIGA && !defined VMS /* Buggy compiler.   */
+struct stat;
+#endif
+typedef struct
+  {
+    __size_t gl_pathc;		/* Count of paths matched by the pattern.  */
+    char **gl_pathv;		/* List of matched pathnames.  */
+    __size_t gl_offs;		/* Slots to reserve in `gl_pathv'.  */
+    int gl_flags;		/* Set to FLAGS, maybe | GLOB_MAGCHAR.  */
+
+    /* If the GLOB_ALTDIRFUNC flag is set, the following functions
+       are used instead of the normal file access functions.  */
+    void (*gl_closedir) __PMT ((void *));
+    struct dirent *(*gl_readdir) __PMT ((void *));
+    __ptr_t (*gl_opendir) __PMT ((__const char *));
+    int (*gl_lstat) __PMT ((__const char *, struct stat *));
+    int (*gl_stat) __PMT ((__const char *, struct stat *));
+  } glob_t;
+
+#ifdef _LARGEFILE64_SOURCE
+struct stat64;
+typedef struct
+  {
+    __size_t gl_pathc;
+    char **gl_pathv;
+    __size_t gl_offs;
+    int gl_flags;
+
+    /* If the GLOB_ALTDIRFUNC flag is set, the following functions
+       are used instead of the normal file access functions.  */
+    void (*gl_closedir) __PMT ((void *));
+    struct dirent64 *(*gl_readdir) __PMT ((void *));
+    __ptr_t (*gl_opendir) __PMT ((__const char *));
+    int (*gl_lstat) __PMT ((__const char *, struct stat64 *));
+    int (*gl_stat) __PMT ((__const char *, struct stat64 *));
+  } glob64_t;
+#endif
+
+#if _FILE_OFFSET_BITS == 64 && __GNUC__ < 2
+# define glob glob64
+# define globfree globfree64
+#else
+# ifdef _LARGEFILE64_SOURCE
+extern int glob64 __P ((__const char *__pattern, int __flags,
+			int (*__errfunc) (__const char *, int),
+			glob64_t *__pglob));
+
+extern void globfree64 __P ((glob64_t *__pglob));
+# endif
+#endif
+
+/* Do glob searching for PATTERN, placing results in PGLOB.
+   The bits defined above may be set in FLAGS.
+   If a directory cannot be opened or read and ERRFUNC is not nil,
+   it is called with the pathname that caused the error, and the
+   `errno' value from the failing call; if it returns non-zero
+   `glob' returns GLOB_ABEND; if it returns zero, the error is ignored.
+   If memory cannot be allocated for PGLOB, GLOB_NOSPACE is returned.
+   Otherwise, `glob' returns zero.  */
+#if _FILE_OFFSET_BITS != 64 || __GNUC__ < 2
+extern int glob __P ((__const char *__pattern, int __flags,
+		      int (*__errfunc) (__const char *, int),
+		      glob_t *__pglob));
+
+/* Free storage allocated in PGLOB by a previous `glob' call.  */
+extern void globfree __P ((glob_t *__pglob));
+#else
+extern int glob __P ((__const char *__pattern, int __flags,
+		      int (*__errfunc) (__const char *, int),
+		      glob_t *__pglob)) __asm__ ("glob64");
+
+extern void globfree __P ((glob_t *__pglob)) __asm__ ("globfree64");
+#endif
+
+
+#ifdef _GNU_SOURCE
+/* Return nonzero if PATTERN contains any metacharacters.
+   Metacharacters can be quoted with backslashes if QUOTE is nonzero.
+
+   This function is not part of the interface specified by POSIX.2
+   but several programs want to use it.  */
+extern int glob_pattern_p __P ((__const char *__pattern, int __quote));
+#endif
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* glob.h  */

gpl.texinfo

@@ -5,7 +5,7 @@
 
 @display
 Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
-675 Mass Ave, Cambridge, MA 02139, USA
+59 Temple Place -- Suite 330, Boston, MA 02111-1307, USA
 
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.
@@ -349,9 +349,9 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
 @end smallexample
 
 Also add information on how to contact you by electronic and paper mail.

implicit.c

@@ -1,5 +1,5 @@
 /* Implicit rule searching for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,94,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,14 +14,16 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 #include "rule.h"
 #include "dep.h"
-#include "file.h"
+#include "filedef.h"
 
-static int pattern_search ();
+static int pattern_search PARAMS ((struct file *file, int archive, unsigned int depth,
+		unsigned int recursions));
 
 /* For a FILE which has no commands specified, try to figure out some
    from the implicit pattern rules.
@@ -34,7 +36,7 @@ try_implicit_rule (file, depth)
      struct file *file;
      unsigned int depth;
 {
-  DEBUGPR ("Looking for an implicit rule for `%s'.\n");
+  DEBUGPR (_("Looking for an implicit rule for `%s'.\n"));
 
   /* The order of these searches was previously reversed.  My logic now is
      that since the non-archive search uses more information in the target
@@ -49,7 +51,7 @@ try_implicit_rule (file, depth)
      archive member name to search for implicit rules.  */
   if (ar_name (file->name))
     {
-      DEBUGPR ("Looking for archive-member implicit rule for `%s'.\n");
+      DEBUGPR (_("Looking for archive-member implicit rule for `%s'.\n"));
       if (pattern_search (file, 1, depth, 0))
 	return 1;
     }
@@ -110,14 +112,14 @@ pattern_search (file, archive, depth, recursions)
   /* This buffer records all the dependencies actually found for a rule.  */
   char **found_files = (char **) alloca (max_pattern_deps * sizeof (char *));
   /* Number of dep names now in FOUND_FILES.  */
-  unsigned int deps_found;
+  unsigned int deps_found = 0;
 
   /* Names of possible dependencies are constructed in this buffer.  */
   register char *depname = (char *) alloca (namelen + max_pattern_dep_length);
 
   /* The start and length of the stem of FILENAME for the current rule.  */
-  register char *stem;
-  register unsigned int stemlen;
+  register char *stem = 0;
+  register unsigned int stemlen = 0;
 
   /* Buffer in which we store all the rules that are possibly applicable.  */
   struct rule **tryrules
@@ -147,11 +149,11 @@ pattern_search (file, archive, depth, recursions)
      that is not just `%'.  */
   int specific_rule_matched = 0;
 
-  register unsigned int i;
+  register unsigned int i = 0;  /* uninit checks OK */
   register struct rule *rule;
   register struct dep *dep;
 
-  char *p;
+  char *p, *vp;
 
 #ifndef	NO_ARCHIVES
   if (archive || ar_name (filename))
@@ -162,7 +164,22 @@ pattern_search (file, archive, depth, recursions)
       /* Set LASTSLASH to point at the last slash in FILENAME
 	 but not counting any slash at the end.  (foo/bar/ counts as
 	 bar/ in directory foo/, not empty in directory foo/bar/.)  */
+#ifdef VMS
+      lastslash = rindex (filename, ']');
+#else
       lastslash = rindex (filename, '/');
+#if defined(__MSDOS__) || defined(WINDOWS32)
+      /* Handle backslashes (possibly mixed with forward slashes)
+	 and the case of "d:file".  */
+      {
+	char *bslash = rindex (filename, '\\');
+	if (lastslash == 0 || bslash > lastslash)
+	  lastslash = bslash;
+	if (lastslash == 0 && filename[0] && filename[1] == ':')
+	  lastslash = filename + 1;
+      }
+#endif
+#endif
       if (lastslash != 0 && lastslash[1] == '\0')
 	lastslash = 0;
     }
@@ -182,7 +199,7 @@ pattern_search (file, archive, depth, recursions)
 	 don't use it here.  */
       if (rule->in_use)
 	{
-	  DEBUGP2 ("Avoiding implicit rule recursion.%s%s\n", "", "");
+	  DEBUGP2 (_("Avoiding implicit rule recursion.%s%s\n"), "", "");
 	  continue;
 	}
 
@@ -210,7 +227,11 @@ pattern_search (file, archive, depth, recursions)
 	  /* Set CHECK_LASTSLASH if FILENAME contains a directory
 	     prefix and the target pattern does not contain a slash.  */
 
+#ifdef VMS
+	  check_lastslash = lastslash != 0 && index (target, ']') == 0;
+#else
 	  check_lastslash = lastslash != 0 && index (target, '/') == 0;
+#endif
 	  if (check_lastslash)
 	    {
 	      /* In that case, don't include the
@@ -226,11 +247,11 @@ pattern_search (file, archive, depth, recursions)
 	  if (check_lastslash)
 	    {
 	      if (stem > (lastslash + 1)
-		  && strncmp (target, lastslash + 1, stem - lastslash - 1))
+		  && !strneq (target, lastslash + 1, stem - lastslash - 1))
 		continue;
 	    }
 	  else if (stem > filename
-		   && strncmp (target, filename, stem - filename))
+		   && !strneq (target, filename, stem - filename))
 	    continue;
 
 	  /* Check that the rule pattern matches the text after the stem.
@@ -314,7 +335,7 @@ pattern_search (file, archive, depth, recursions)
 	      stemlen -= (lastslash - filename) + 1;
 	    }
 
-	  DEBUGP2 ("Trying pattern rule with stem `%.*s'.\n",
+	  DEBUGP2 (_("Trying pattern rule with stem `%.*s'.\n"),
 		   (int) stemlen, stem);
 
 	  /* Try each dependency; see if it "exists".  */
@@ -322,6 +343,8 @@ pattern_search (file, archive, depth, recursions)
 	  deps_found = 0;
 	  for (dep = rule->deps; dep != 0; dep = dep->next)
 	    {
+              struct file *fp;
+
 	      /* If the dependency name has a %, substitute the stem.  */
 	      p = index (dep_name (dep), '%');
 	      if (p != 0)
@@ -353,16 +376,16 @@ pattern_search (file, archive, depth, recursions)
 		     "impossible", then the rule fails and don't
 		     bother trying it on the second pass either
 		     since we know that will fail too.  */
-		  DEBUGP2 ("Rejecting impossible %s dependency `%s'.\n",
-			   p == depname ? "implicit" : "rule", p);
+		  DEBUGP2 (_("Rejecting impossible %s prerequisite `%s'.\n"),
+			   p == depname ? _("implicit") : _("rule"), p);
 		  tryrules[i] = 0;
 		  break;
 		}
 
 	      intermediate_files[deps_found] = 0;
 
-	      DEBUGP2 ("Trying %s dependency `%s'.\n",
-		       p == depname ? "implicit" : "rule", p);
+	      DEBUGP2 (_("Trying %s prerequisite `%s'.\n"),
+		       p == depname ? _("implicit") : _("rule"), p);
 
 	      /* The DEP->changed flag says that this dependency resides in a
 		 nonexistent directory.  So we normally can skip looking for
@@ -370,19 +393,25 @@ pattern_search (file, archive, depth, recursions)
 		 dependency file we are actually looking for is in a different
 		 directory (the one gotten by prepending FILENAME's directory),
 		 so it might actually exist.  */
+              /* If we find a file but the intermediate flag is set, then it
+                 was put here by a .INTERMEDIATE: rule so ignore it.  */
 
 	      if ((!dep->changed || check_lastslash)
-		  && (lookup_file (p) != 0 || file_exists_p (p)))
+		  && (((fp = lookup_file (p)) != 0 && !fp->intermediate)
+                      || file_exists_p (p)))
 		{
-		  found_files[deps_found++] = savestring (p, strlen (p));
+		  found_files[deps_found++] = xstrdup (p);
 		  continue;
 		}
 	      /* This code, given FILENAME = "lib/foo.o", dependency name
 		 "lib/foo.c", and VPATH=src, searches for "src/lib/foo.c".  */
-	      if (vpath_search (&p, (time_t *) 0))
+	      vp = p;
+	      if (vpath_search (&vp, (FILE_TIMESTAMP *) 0))
 		{
-		  DEBUGP2 ("Found dependency as `%s'.%s\n", p, "");
-		  found_files[deps_found++] = p;
+		  DEBUGP2 (_("Found prerequisite `%s' as VPATH `%s'\n"),
+                           p, vp);
+		  strcpy (vp, p);
+		  found_files[deps_found++] = vp;
 		  continue;
 		}
 
@@ -396,15 +425,15 @@ pattern_search (file, archive, depth, recursions)
 		    intermediate_file
 		      = (struct file *) alloca (sizeof (struct file));
 
-		  DEBUGP2 ("Looking for a rule with %s file `%s'.\n",
-			   "intermediate", p);
+		  DEBUGP2 (_("Looking for a rule with %s file `%s'.\n"),
+			   _("intermediate"), p);
 
 		  bzero ((char *) intermediate_file, sizeof (struct file));
 		  intermediate_file->name = p;
 		  if (pattern_search (intermediate_file, 0, depth + 1,
 				      recursions + 1))
 		    {
-		      p = savestring (p, strlen (p));
+		      p = xstrdup (p);
 		      intermediate_patterns[deps_found]
 			= intermediate_file->name;
 		      intermediate_file->name = p;
@@ -413,7 +442,7 @@ pattern_search (file, archive, depth, recursions)
 		      /* Allocate an extra copy to go in FOUND_FILES,
 			 because every elt of FOUND_FILES is consumed
 			 or freed later.  */
-		      found_files[deps_found] = savestring (p, strlen (p));
+		      found_files[deps_found] = xstrdup (p);
 		      ++deps_found;
 		      continue;
 		    }
@@ -496,6 +525,7 @@ pattern_search (file, archive, depth, recursions)
 	  f->deps = imf->deps;
 	  f->cmds = imf->cmds;
 	  f->stem = imf->stem;
+          f->also_make = imf->also_make;
 	  imf = lookup_file (intermediate_patterns[deps_found]);
 	  if (imf != 0 && imf->precious)
 	    f->precious = 1;
@@ -504,6 +534,9 @@ pattern_search (file, archive, depth, recursions)
 	  for (dep = f->deps; dep != 0; dep = dep->next)
 	    {
 	      dep->file = enter_file (dep->name);
+              /* enter_file uses dep->name _if_ we created a new file.  */
+              if (dep->name != dep->file->name)
+                free (dep->name);
 	      dep->name = 0;
 	      dep->file->tried_implicit |= dep->changed;
 	    }
@@ -545,7 +578,7 @@ pattern_search (file, archive, depth, recursions)
       dep->next = file->deps;
       file->deps = dep;
     }
- 
+
   if (!checked_lastslash[foundrule])
     /* Always allocate new storage, since STEM might be
        on the stack for an intermediate file.  */
@@ -563,10 +596,9 @@ pattern_search (file, archive, depth, recursions)
 
   file->cmds = rule->cmds;
 
-  /* Put the targets other than the one that
-     matched into FILE's `also_make' member.  */
+  /* If this rule builds other targets, too, put the others into FILE's
+     `also_make' member.  */
 
-  /* If there was only one target, there is nothing to do.  */
   if (rule->targets[1] != 0)
     for (i = 0; rule->targets[i] != 0; ++i)
       if (i != matches[foundrule])

job.h

@@ -1,5 +1,5 @@
 /* Definitions for managing subprocesses in GNU Make.
-Copyright (C) 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1996, 1999 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,7 +14,11 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+#ifndef SEEN_JOB_H
+#define SEEN_JOB_H
 
 /* Structure describing a running or dead child process.  */
 
@@ -31,6 +35,11 @@ struct child
     char *command_ptr;		/* Ptr into command_lines[command_line].  */
 
     pid_t pid;			/* Child process's ID number.  */
+#ifdef VMS
+    int efn;			/* Completion event flag number */
+    int cstatus;		/* Completion status */
+#endif
+    char *sh_batch_file;        /* Script file for shell commands */
     unsigned int remote:1;	/* Nonzero if executing remotely.  */
 
     unsigned int noerror:1;	/* Nonzero if commands contained a `-'.  */
@@ -41,18 +50,27 @@ struct child
 
 extern struct child *children;
 
-extern void new_job ();
-extern void reap_children ();
-extern void start_waiting_jobs ();
+extern void new_job PARAMS ((struct file *file));
+extern void reap_children PARAMS ((int block, int err));
+extern void start_waiting_jobs PARAMS ((void));
 
-extern char **construct_command_argv ();
-extern void child_execute_job ();
-extern void exec_command ();
+extern char **construct_command_argv PARAMS ((char *line, char **restp, struct file *file, char** batch_file));
+#ifdef VMS
+extern int child_execute_job PARAMS ((char *argv, struct child *child));
+#else
+extern void child_execute_job PARAMS ((int stdin_fd, int stdout_fd, char **argv, char **envp));
+#endif
+#ifdef _AMIGA
+extern void exec_command PARAMS ((char **argv));
+#else
+extern void exec_command PARAMS ((char **argv, char **envp));
+#endif
 
 extern unsigned int job_slots_used;
 
+extern void block_sigs PARAMS ((void));
 #ifdef POSIX
-extern void unblock_sigs ();
+extern void unblock_sigs PARAMS ((void));
 #else
 #ifdef	HAVE_SIGSETMASK
 extern int fatal_signal_mask;
@@ -61,3 +79,5 @@ extern int fatal_signal_mask;
 #define	unblock_sigs()
 #endif
 #endif
+
+#endif /* SEEN_JOB_H */

loadtest.c

@@ -0,0 +1,31 @@
+extern volatile void exit (int);
+extern double load_average (void);
+
+double max_load_average = -1;
+unsigned int job_slots_used = 0;
+
+
+int
+main ()
+{
+  printf ("load_average () = %.2f\n", load_average ());
+  exit (0);
+}
+
+void
+error (char *fmt, ...)
+{
+  exit (1);
+}
+
+void 
+perror_with_name (char *a, char *b)
+{
+  exit (1);
+}
+
+void
+wait_for_children (int i)
+{
+  return;
+}

maintMakefile

@@ -0,0 +1,91 @@
+# Maintainer-only makefile segment.  This contains things that are relevant
+# only if you have the full copy of the GNU make sources from the CVS
+# tree, not a dist copy.
+#
+
+# Find the glob source files... this might be dangerous, but we're maintainers!
+#
+globsrc := $(wildcard glob/*.c)
+globhdr := $(wildcard glob/*.h)
+
+TEMPLATES = README README.DOS README.W32 \
+	    config.ami configh.dos config.h.W32 config.h-vms
+MTEMPLATES = Makefile.DOS SMakefile
+
+# We need this to ensure that README and build.sh.in are created on time to
+# avoid errors by automake.
+#
+#Makefile.in: README build.sh.in
+
+# General rule for turning a .template into a regular file.
+#
+$(TEMPLATES) : % : %.template Makefile
+	rm -f $@
+	sed -e 's@%VERSION%@$(VERSION)@g' \
+	    -e 's@%PACKAGE%@$(PACKAGE)@g' \
+	  $< > $@
+	chmod a-w $@
+
+# Construct Makefiles by adding on dependencies, etc.
+#
+$(MTEMPLATES) : % : %.template .dep_segment Makefile
+	rm -f $@
+	sed -e 's@%VERSION%@$(VERSION)@g' \
+	    -e 's@%PROGRAMS%@$(bin_PROGRAMS)@g' \
+	    -e 's@%SOURCES%@$(filter-out remote-%,$(make_SOURCES)) remote-$$(REMOTE).c@g' \
+	    -e 's@%OBJECTS%@$(filter-out remote-%,$(make_OBJECTS)) remote-$$(REMOTE).o@g' \
+	    -e 's@%GLOB_SOURCES%@$(globsrc) $(globhdr)@g' \
+	    -e 's@%GLOB_OBJECTS%@$(globsrc:glob/%.c=%.o)@g' \
+	  $< > $@
+	echo >>$@; echo '# --------------- DEPENDENCIES' >>$@; echo '#' >>$@; \
+	  cat $(word 2,$^) >>$@
+	chmod a-w $@
+
+NMakefile: NMakefile.template .dep_segment Makefile
+	rm -f $@
+	cp $< $@
+	echo >>$@; echo '# --------------- DEPENDENCIES' >>$@; echo '#' >>$@; \
+	  sed 's/^\([^ ]*\)\.o:/$$(OUTDIR)\/\1.obj:/' $(word 2,$^) >>$@
+	chmod a-w $@
+
+# Construct build.sh.in
+#
+build.sh.in: build.template Makefile
+	rm -f $@
+	sed -e 's@%objs%@$(filter-out remote-%,$(make_OBJECTS)@g' \
+	    -e 's@%globobjs%@$(patsubst %.c,%.o,$(globsrc)))@g' \
+	  $< > $@
+	chmod a-w+x $@
+
+# Use automake to build a dependency list file, for "foreign" makefiles like
+# Makefile.DOS.
+#
+.dep_segment: Makefile.am maintMakefile $(DEP_FILES)
+	$(AUTOMAKE) --generate-deps --build-dir=. --srcdir-name=.
+
+# We clean everything here.  The GNU standards for makefile conventions say
+# you shouldn't remove configure, etc., but this makefile is only available
+# in a full development distribution, so they'll only be removed then.
+#
+# And _I_ want them to be removed ;)
+#
+maintFILES = configure aclocal.m4 config.h.in Makefile.in stamp-h.in
+
+MAINTAINERCLEANFILES =  $(maintFILES) $(TEMPLATES) $(MTEMPLATES) NMakefile \
+			missing build.sh.in .dep_segment
+
+# Put the alpha distribution files up for anonymous FTP.
+#
+ALPHA	:= ~ftp/gnu
+TARFILE	:= $(distdir).tar.gz
+
+.PHONY: alpha
+alpha: $(ALPHA) $(TARFILE)
+	@rm -f $(ALPHA)/$(TARFILE)
+	cp -p $(TARFILE) $(ALPHA)
+
+# This is needed because normal builds with GCC don't compile alloca.c, so
+# alloca.P doesn't get built :-/.
+#
+.deps/alloca.P: alloca.c
+	$(COMPILE) -M -o $@ $<

make-stds.texi

@@ -8,14 +8,30 @@
 @cindex conventions for makefiles
 @cindex standards for makefiles
 
-This chapter describes conventions for writing the Makefiles for GNU programs.
+This
+@ifinfo
+node
+@end ifinfo
+@iftex
+@ifset CODESTD
+section
+@end ifset
+@ifclear CODESTD
+chapter
+@end ifclear
+@end iftex
+describes conventions for writing the Makefiles for GNU programs.
+Using Automake will help you write a Makefile that follows these
+conventions.
 
 @menu
-* Makefile Basics::
-* Utilities in Makefiles::
-* Standard Targets::
-* Command Variables::
-* Directory Variables::
+* Makefile Basics::		General Conventions for Makefiles
+* Utilities in Makefiles::	Utilities in Makefiles
+* Command Variables::		Variables for Specifying Commands
+* Directory Variables::		Variables for Installation Directories
+* Standard Targets::		Standard Targets for Users
+* Install Command Categories::  Three categories of commands in the `install'
+                                  rule: normal, pre-install and post-install.
 @end menu
 
 @node Makefile Basics
@@ -51,11 +67,12 @@ you need to run programs that are a part of your package during the
 make, please make sure that it uses @file{./} if the program is built as
 part of the make or @file{$(srcdir)/} if the file is an unchanging part
 of the source code.  Without one of these prefixes, the current search
-path is used.  
+path is used.
 
-The distinction between @file{./} and @file{$(srcdir)/} is important
-when using the @samp{--srcdir} option to @file{configure}.  A rule of
-the form:
+The distinction between @file{./} (the @dfn{build directory}) and
+@file{$(srcdir)/} (the @dfn{source directory}) is important because
+users can build in a separate directory using the @samp{--srcdir} option
+to @file{configure}.  A rule of the form:
 
 @smallexample
 foo.1 : foo.man sedscript
@@ -63,15 +80,14 @@ foo.1 : foo.man sedscript
 @end smallexample
 
 @noindent
-will fail when the current directory is not the source directory,
-because @file{foo.man} and @file{sedscript} are not in the current
-directory.
+will fail when the build directory is not the source directory, because
+@file{foo.man} and @file{sedscript} are in the the source directory.
 
 When using GNU @code{make}, relying on @samp{VPATH} to find the source
 file will work in the case where there is a single dependency file,
-since the @file{make} automatic variable @samp{$<} will represent the
+since the @code{make} automatic variable @samp{$<} will represent the
 source file wherever it is.  (Many versions of @code{make} set @samp{$<}
-only in implicit rules.)  A makefile target like
+only in implicit rules.)  A Makefile target like
 
 @smallexample
 foo.o : bar.c
@@ -97,6 +113,21 @@ foo.1 : foo.man sedscript
         sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@@
 @end smallexample
 
+GNU distributions usually contain some files which are not source
+files---for example, Info files, and the output from Autoconf, Automake,
+Bison or Flex.  Since these files normally appear in the source
+directory, they should always appear in the source directory, not in the
+build directory.  So Makefile rules to update them should put the
+updated files in the source directory.
+
+However, if a file does not appear in the distribution, then the
+Makefile should not put it in the source directory, because building a
+program in ordinary circumstances should not modify the source directory
+in any way.
+
+Try to make the build and installation targets, at least (and all their
+subtargets) work correctly with a parallel @code{make}.
+
 @node Utilities in Makefiles
 @section Utilities in Makefiles
 
@@ -107,228 +138,61 @@ special features of @code{ksh} or @code{bash}.
 The @code{configure} script and the Makefile rules for building and
 installation should not use any utilities directly except these:
 
+@c dd find
+@c gunzip gzip md5sum
+@c mkfifo mknod tee uname 
+
 @example
-cat cmp cp echo egrep expr grep
-ln mkdir mv pwd rm rmdir sed test touch
+cat cmp cp diff echo egrep expr false grep install-info
+ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true
 @end example
 
+The compression program @code{gzip} can be used in the @code{dist} rule.
+
 Stick to the generally supported options for these programs.  For
 example, don't use @samp{mkdir -p}, convenient as it may be, because
 most systems don't support it.
 
+It is a good idea to avoid creating symbolic links in makefiles, since a
+few systems don't support them.
+
 The Makefile rules for building and installation can also use compilers
 and related programs, but should do so via @code{make} variables so that the
 user can substitute alternatives.  Here are some of the programs we
 mean:
 
 @example
-ar bison cc flex install ld lex
+ar bison cc flex install ld ldconfig lex
 make makeinfo ranlib texi2dvi yacc
 @end example
 
-Use the following @code{make} variables:
+Use the following @code{make} variables to run those programs:
 
 @example
-$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LEX)
+$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
 $(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
 @end example
 
-When you use @code{ranlib}, you should make sure nothing bad happens if
-the system does not have @code{ranlib}.  Arrange to ignore an error
-from that command, and print a message before the command to tell the
-user that failure of the @code{ranlib} command does not mean a problem.
+When you use @code{ranlib} or @code{ldconfig}, you should make sure
+nothing bad happens if the system does not have the program in question.
+Arrange to ignore an error from that command, and print a message before
+the command to tell the user that failure of this command does not mean
+a problem.  (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
+this.)
 
 If you use symbolic links, you should implement a fallback for systems
 that don't have symbolic links.
 
+Additional utilities that can be used via Make variables are:
+
+@example
+chgrp chmod chown mknod
+@end example
+
 It is ok to use other utilities in Makefile portions (or scripts)
-intended only for particular systems where you know those utilities to
+intended only for particular systems where you know those utilities
 exist.
 
-@node Standard Targets
-@section Standard Targets for Users
-
-All GNU programs should have the following targets in their Makefiles:
-
-@table @samp
-@item all
-Compile the entire program.  This should be the default target.  This
-target need not rebuild any documentation files; Info files should
-normally be included in the distribution, and DVI files should be made
-only when explicitly asked for.
-
-@item install
-Compile the program and copy the executables, libraries, and so on to
-the file names where they should reside for actual use.  If there is a
-simple test to verify that a program is properly installed, this target
-should run that test.
-
-The commands should create all the directories in which files are to be
-installed, if they don't already exist.  This includes the directories
-specified as the values of the variables @code{prefix} and
-@code{exec_prefix}, as well as all subdirectories that are needed.
-One way to do this is by means of an @code{installdirs} target
-as described below.
-
-Use @samp{-} before any command for installing a man page, so that
-@code{make} will ignore any errors.  This is in case there are systems
-that don't have the Unix man page documentation system installed.
-
-The way to install Info files is to copy them into @file{$(infodir)}
-with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
-the @code{install-info} program if it is present.  @code{install-info}
-is a script that edits the Info @file{dir} file to add or update the
-menu entry for the given Info file; it will be part of the Texinfo package.
-Here is a sample rule to install an Info file:
-
-@comment This example has been carefully formatted for the Make manual.
-@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu.
-@smallexample
-$(infodir)/foo.info: foo.info
-# There may be a newer info file in . than in srcdir.
-        -if test -f foo.info; then d=.; \
-         else d=$(srcdir); fi; \
-        $(INSTALL_DATA) $$d/foo.info $@@; \
-# Run install-info only if it exists.
-# Use `if' instead of just prepending `-' to the
-# line so we notice real errors from install-info.
-# We use `$(SHELL) -c' because some shells do not
-# fail gracefully when there is an unknown command.
-        if $(SHELL) -c 'install-info --version' \
-           >/dev/null 2>&1; then \
-          install-info --infodir=$(infodir) $$d/foo.info; \
-        else true; fi
-@end smallexample
-
-@item uninstall
-Delete all the installed files that the @samp{install} target would
-create (but not the noninstalled files such as @samp{make all} would
-create).
-
-@comment The gratuitous blank line here is to make the table look better
-@comment in the printed Make manual.  Please leave it in.
-@item clean
-
-Delete all files from the current directory that are normally created by
-building the program.  Don't delete the files that record the
-configuration.  Also preserve files that could be made by building, but
-normally aren't because the distribution comes with them.
-
-Delete @file{.dvi} files here if they are not part of the distribution.
-
-@item distclean
-Delete all files from the current directory that are created by
-configuring or building the program.  If you have unpacked the source
-and built the program without creating any other files, @samp{make
-distclean} should leave only the files that were in the distribution.
-
-@item mostlyclean
-Like @samp{clean}, but may refrain from deleting a few files that people
-normally don't want to recompile.  For example, the @samp{mostlyclean}
-target for GCC does not delete @file{libgcc.a}, because recompiling it
-is rarely necessary and takes a lot of time.
-
-@item realclean
-Delete everything from the current directory that can be reconstructed
-with this Makefile.  This typically includes everything deleted by
-@code{distclean}, plus more: C source files produced by Bison, tags tables,
-Info files, and so on.
-
-One exception, however: @samp{make realclean} should not delete
-@file{configure} even if @file{configure} can be remade using a rule in
-the Makefile.  More generally, @samp{make realclean} should not delete
-anything that needs to exist in order to run @file{configure}
-and then begin to build the program.
-
-@item TAGS
-Update a tags table for this program.
-
-@item info
-Generate any Info files needed.  The best way to write the rules is as
-follows:
-
-@smallexample
-info: foo.info
-
-foo.info: foo.texi chap1.texi chap2.texi
-        $(MAKEINFO) $(srcdir)/foo.texi
-@end smallexample
-
-@noindent
-You must define the variable @code{MAKEINFO} in the Makefile.  It should
-run the @code{makeinfo} program, which is part of the Texinfo
-distribution.
-
-@item dvi
-Generate DVI files for all TeXinfo documentation.  
-For example:
-
-@smallexample
-dvi: foo.dvi
-
-foo.dvi: foo.texi chap1.texi chap2.texi
-        $(TEXI2DVI) $(srcdir)/foo.texi
-@end smallexample
-
-@noindent
-You must define the variable @code{TEXI2DVI} in the Makefile.  It should
-run the program @code{texi2dvi}, which is part of the Texinfo
-distribution.  Alternatively, write just the dependencies, and allow GNU
-Make to provide the command.
-
-@item dist
-Create a distribution tar file for this program.  The tar file should be
-set up so that the file names in the tar file start with a subdirectory
-name which is the name of the package it is a distribution for.  This
-name can include the version number.
-
-For example, the distribution tar file of GCC version 1.40 unpacks into
-a subdirectory named @file{gcc-1.40}.
-
-The easiest way to do this is to create a subdirectory appropriately
-named, use @code{ln} or @code{cp} to install the proper files in it, and
-then @code{tar} that subdirectory.
-
-The @code{dist} target should explicitly depend on all non-source files
-that are in the distribution, to make sure they are up to date in the
-distribution.  
-@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
-
-@item check
-Perform self-tests (if any).  The user must build the program before
-running the tests, but need not install the program; you should write
-the self-tests so that they work when the program is built but not
-installed.
-@end table
-
-The following targets are suggested as conventional names, for programs
-in which they are useful.
-
-@table @code
-@item installcheck
-Perform installation tests (if any).  The user must build and install
-the program before running the tests.  You should not assume that
-@file{$(bindir)} is in the search path.  
-
-@item installdirs
-It's useful to add a target named @samp{installdirs} to create the
-directories where files are installed, and their parent directories.
-There is a script called @file{mkinstalldirs} which is convenient for
-this; find it in the Texinfo package.@c It's in /gd/gnu/lib/mkinstalldirs.
-You can use a rule like this:
-
-@comment This has been carefully formatted to look decent in the Make manual.
-@comment Please be sure not to make it extend any further to the right.--roland
-@smallexample
-# Make sure all installation directories (e.g. $(bindir))
-# actually exist by making them if necessary.
-installdirs: mkinstalldirs
-        $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
-                                $(libdir) $(infodir) \
-                                $(mandir)
-@end smallexample
-@end table
-
 @node Command Variables
 @section Variables for Specifying Commands
 
@@ -347,11 +211,12 @@ don't need to replace them with other programs.
 Each program-name variable should come with an options variable that is
 used to supply options to the program.  Append @samp{FLAGS} to the
 program-name variable name to get the options variable name---for
-example, @code{BISONFLAGS}.  (The name @code{CFLAGS} is an exception to
-this rule, but we keep it because it is standard.)  Use @code{CPPFLAGS}
-in any compilation command that runs the preprocessor, and use
-@code{LDFLAGS} in any compilation command that does linking as well as
-in any direct use of @code{ld}.
+example, @code{BISONFLAGS}.  (The names @code{CFLAGS} for the C
+compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
+exceptions to this rule, but we keep them because they are standard.)
+Use @code{CPPFLAGS} in any compilation command that runs the
+preprocessor, and use @code{LDFLAGS} in any compilation command that
+does linking as well as in any direct use of @code{ld}.
 
 If there are C compiler options that @emph{must} be used for proper
 compilation of certain files, do not include them in @code{CFLAGS}.
@@ -377,6 +242,9 @@ Put @code{CFLAGS} last in the compilation command, after other variables
 containing compiler options, so the user can use @code{CFLAGS} to
 override the others.
 
+@code{CFLAGS} should be used in every invocation of the C compiler,
+both those which do compilation and those which do linking.
+
 Every Makefile should define the variable @code{INSTALL}, which is the
 basic command for installing a file into the system.
 
@@ -391,6 +259,18 @@ $(INSTALL_PROGRAM) foo $(bindir)/foo
 $(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
 @end example
 
+Optionally, you may prepend the value of @code{DESTDIR} to the target
+filename.  Doing this allows the installer to create a snapshot of the
+installation to be copied onto the real target filesystem later.  Do not
+set the value of @code{DESTDIR} in your Makefile, and do not include it
+in any installed files.  With support for @code{DESTDIR}, the above
+examples become:
+
+@example
+$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
+@end example
+
 @noindent
 Always use a file name, not a directory name, as the second argument of
 the installation commands.  Use a separate command for each file to be
@@ -401,7 +281,9 @@ installed.
 
 Installation directories should always be named by variables, so it is
 easy to install in a nonstandard place.  The standard names for these
-variables are as follows.
+variables are described below.  They are based on a standard filesystem
+layout; variants of it are used in SVR4, 4.4BSD, Linux, Ultrix v4, and
+other modern operating systems.
 
 These two variables set the root for the installation.  All the other
 installation directories should be subdirectories of one of these two,
@@ -410,17 +292,28 @@ and nothing should be directly installed into these two directories.
 @table @samp
 @item prefix
 A prefix used in constructing the default values of the variables listed
-below.  The default value of @code{prefix} should be @file{/usr/local}
-(at least for now).
+below.  The default value of @code{prefix} should be @file{/usr/local}.
+When building the complete GNU system, the prefix will be empty and
+@file{/usr} will be a symbolic link to @file{/}.
+(If you are using Autoconf, write it as @samp{@@prefix@@}.)
+
+Running @samp{make install} with a different value of @code{prefix}
+from the one used to build the program should @var{not} recompile
+the program.
 
 @item exec_prefix
 A prefix used in constructing the default values of some of the
 variables listed below.  The default value of @code{exec_prefix} should
 be @code{$(prefix)}.
+(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
 
 Generally, @code{$(exec_prefix)} is used for directories that contain
 machine-specific files (such as executables and subroutine libraries),
 while @code{$(prefix)} is used directly for other directories.
+
+Running @samp{make install} with a different value of @code{exec_prefix}
+from the one used to build the program should @var{not} recompile the
+program.
 @end table
 
 Executable programs are installed in one of the following directories.
@@ -430,18 +323,21 @@ Executable programs are installed in one of the following directories.
 The directory for installing executable programs that users can run.
 This should normally be @file{/usr/local/bin}, but write it as
 @file{$(exec_prefix)/bin}.
+(If you are using Autoconf, write it as @samp{@@bindir@@}.)
 
 @item sbindir
 The directory for installing executable programs that can be run from
 the shell, but are only generally useful to system administrators.  This
 should normally be @file{/usr/local/sbin}, but write it as
 @file{$(exec_prefix)/sbin}.
+(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
 
 @item libexecdir
 @comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
 The directory for installing executable programs to be run by other
 programs rather than by users.  This directory should normally be
 @file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
+(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
 @end table
 
 Data files used by the program during its execution are divided into
@@ -460,18 +356,20 @@ be shared between two machines.
 @end itemize
 
 This makes for six different possibilities.  However, we want to
-discourage the use of architecture-dependent files, aside from of object
+discourage the use of architecture-dependent files, aside from object
 files and libraries.  It is much cleaner to make other data files
 architecture-independent, and it is generally not hard.
 
-Therefore, here are the variables makefiles should use to specify
+Therefore, here are the variables Makefiles should use to specify
 directories:
 
 @table @samp
 @item datadir
 The directory for installing read-only architecture independent data
 files.  This should normally be @file{/usr/local/share}, but write it as
-@file{$(prefix)/share}.  As a special exception, see @file{$(infodir)}
+@file{$(prefix)/share}.
+(If you are using Autoconf, write it as @samp{@@datadir@@}.)
+As a special exception, see @file{$(infodir)}
 and @file{$(includedir)} below.
 
 @item sysconfdir
@@ -481,40 +379,56 @@ and network configuration files, @file{/etc/passwd}, and so forth belong
 here.  All the files in this directory should be ordinary ASCII text
 files.  This directory should normally be @file{/usr/local/etc}, but
 write it as @file{$(prefix)/etc}.
+(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
 
-@c rewritten to avoid overfull hbox --tower
-Do not install executables
-@c here
-in this directory (they probably
-belong in @file{$(libexecdir)} or @file{$(sbindir))}.  Also do not
-install files that are modified in the normal course of their use
-(programs whose purpose is to change the configuration of the system
-excluded).  Those probably belong in @file{$(localstatedir)}.
+Do not install executables here in this directory (they probably belong
+in @file{$(libexecdir)} or @file{$(sbindir)}).  Also do not install
+files that are modified in the normal course of their use (programs
+whose purpose is to change the configuration of the system excluded).
+Those probably belong in @file{$(localstatedir)}.
 
 @item sharedstatedir
 The directory for installing architecture-independent data files which
 the programs modify while they run.  This should normally be
 @file{/usr/local/com}, but write it as @file{$(prefix)/com}.
+(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
 
 @item localstatedir
 The directory for installing data files which the programs modify while
 they run, and that pertain to one specific machine.  Users should never
 need to modify files in this directory to configure the package's
 operation; put such configuration information in separate files that go
-in @file{datadir} or @file{$(sysconfdir)}.  @file{$(localstatedir)}
+in @file{$(datadir)} or @file{$(sysconfdir)}.  @file{$(localstatedir)}
 should normally be @file{/usr/local/var}, but write it as
 @file{$(prefix)/var}.
+(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
 
 @item libdir
 The directory for object files and libraries of object code.  Do not
-install executables here, they probably belong in @file{$(libexecdir)}
+install executables here, they probably ought to go in @file{$(libexecdir)}
 instead.  The value of @code{libdir} should normally be
 @file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
+(If you are using Autoconf, write it as @samp{@@libdir@@}.)
 
 @item infodir
 The directory for installing the Info files for this package.  By
 default, it should be @file{/usr/local/info}, but it should be written
 as @file{$(prefix)/info}.
+(If you are using Autoconf, write it as @samp{@@infodir@@}.)
+
+@item lispdir
+The directory for installing any Emacs Lisp files in this package.  By
+default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
+should be written as @file{$(prefix)/share/emacs/site-lisp}.
+
+If you are using Autoconf, write the default as @samp{@@lispdir@@}.
+In order to make @samp{@@lispdir@@} work, you need the following lines
+in your @file{configure.in} file:
+
+@example
+lispdir='$@{datadir@}/emacs/site-lisp'
+AC_SUBST(lispdir)
+@end example
 
 @item includedir
 @c rewritten to avoid overfull hbox --roland
@@ -522,8 +436,9 @@ The directory for installing header files to be included by user
 programs with the C @samp{#include} preprocessor directive.  This
 should normally be @file{/usr/local/include}, but write it as
 @file{$(prefix)/include}.
+(If you are using Autoconf, write it as @samp{@@includedir@@}.)
 
-Most compilers other than GCC do not look for header files in
+Most compilers other than GCC do not look for header files in directory
 @file{/usr/local/include}.  So installing the header files this way is
 only useful with GCC.  Sometimes this is not a problem because some
 libraries are only really intended to work with GCC.  But some libraries
@@ -534,6 +449,7 @@ specified by @code{oldincludedir}.
 @item oldincludedir
 The directory for installing @samp{#include} header files for use with
 compilers other than GCC.  This should normally be @file{/usr/include}.
+(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
 
 The Makefile commands should check whether the value of
 @code{oldincludedir} is empty.  If it is, they should not try to use
@@ -547,26 +463,25 @@ file in the @code{oldincludedir} directory if either (1) there is no
 package.
 
 To tell whether @file{foo.h} came from the Foo package, put a magic
-string in the file---part of a comment---and grep for that string.
+string in the file---part of a comment---and @code{grep} for that string.
 @end table
 
 Unix-style man pages are installed in one of the following:
 
 @table @samp
 @item mandir
-The directory for installing the man pages (if any) for this package.
-It should include the suffix for the proper section of the
-manual---usually @samp{1} for a utility.  It will normally be
-@file{/usr/local/man/man1}, but you should write it as
-@file{$(prefix)/man/man1}. 
+The top-level directory for installing the man pages (if any) for this
+package.  It will normally be @file{/usr/local/man}, but you should
+write it as @file{$(prefix)/man}.
+(If you are using Autoconf, write it as @samp{@@mandir@@}.)
 
 @item man1dir
-The directory for installing section 1 man pages.
+The directory for installing section 1 man pages.  Write it as
+@file{$(mandir)/man1}.
 @item man2dir
-The directory for installing section 2 man pages.
+The directory for installing section 2 man pages.  Write it as
+@file{$(mandir)/man2}
 @item @dots{}
-Use these names instead of @samp{mandir} if the package needs to install man
-pages in more than one section of the manual.
 
 @strong{Don't make the primary documentation for any GNU software be a
 man page.  Write a manual in Texinfo instead.  Man pages are just for
@@ -592,6 +507,7 @@ And finally, you should set the following variable:
 @item srcdir
 The directory for the sources being compiled.  The value of this
 variable is normally inserted by the @code{configure} shell script.
+(If you are using Autconf, use @samp{srcdir = @@srcdir@@}.)
 @end table
 
 For example:
@@ -623,3 +539,378 @@ specify the exact same values for several different GNU packages.  In
 order for this to be useful, all the packages must be designed so that
 they will work sensibly when the user does so.
 
+@node Standard Targets
+@section Standard Targets for Users
+
+All GNU programs should have the following targets in their Makefiles:
+
+@table @samp
+@item all
+Compile the entire program.  This should be the default target.  This
+target need not rebuild any documentation files; Info files should
+normally be included in the distribution, and DVI files should be made
+only when explicitly asked for.
+
+By default, the Make rules should compile and link with @samp{-g}, so
+that executable programs have debugging symbols.  Users who don't mind
+being helpless can strip the executables later if they wish.
+
+@item install
+Compile the program and copy the executables, libraries, and so on to
+the file names where they should reside for actual use.  If there is a
+simple test to verify that a program is properly installed, this target
+should run that test.
+
+Do not strip executables when installing them.  Devil-may-care users can
+use the @code{install-strip} target to do that.
+
+If possible, write the @code{install} target rule so that it does not
+modify anything in the directory where the program was built, provided
+@samp{make all} has just been done.  This is convenient for building the
+program under one user name and installing it under another.
+
+The commands should create all the directories in which files are to be
+installed, if they don't already exist.  This includes the directories
+specified as the values of the variables @code{prefix} and
+@code{exec_prefix}, as well as all subdirectories that are needed.
+One way to do this is by means of an @code{installdirs} target
+as described below.
+
+Use @samp{-} before any command for installing a man page, so that
+@code{make} will ignore any errors.  This is in case there are systems
+that don't have the Unix man page documentation system installed.
+
+The way to install Info files is to copy them into @file{$(infodir)}
+with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
+the @code{install-info} program if it is present.  @code{install-info}
+is a program that edits the Info @file{dir} file to add or update the
+menu entry for the given Info file; it is part of the Texinfo package.
+Here is a sample rule to install an Info file:
+
+@comment This example has been carefully formatted for the Make manual.
+@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu.
+@smallexample
+$(DESTDIR)$(infodir)/foo.info: foo.info
+        $(POST_INSTALL)
+# There may be a newer info file in . than in srcdir.
+        -if test -f foo.info; then d=.; \
+         else d=$(srcdir); fi; \
+        $(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@@; \
+# Run install-info only if it exists.
+# Use `if' instead of just prepending `-' to the
+# line so we notice real errors from install-info.
+# We use `$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+        if $(SHELL) -c 'install-info --version' \
+           >/dev/null 2>&1; then \
+          install-info --dir-file=$(DESTDIR)$(infodir)/dir \
+                       $(DESTDIR)$(infodir)/foo.info; \
+        else true; fi
+@end smallexample
+
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.  @xref{Install Command
+Categories}.
+
+@item uninstall
+Delete all the installed files---the copies that the @samp{install}
+target creates.
+
+This rule should not modify the directories where compilation is done,
+only the directories where files are installed.
+
+The uninstallation commands are divided into three categories, just like
+the installation commands.  @xref{Install Command Categories}.
+
+@item install-strip
+Like @code{install}, but strip the executable files while installing
+them.  In many cases, the definition of this target can be very simple:
+
+@smallexample
+install-strip:
+        $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+                install
+@end smallexample
+
+Normally we do not recommend stripping an executable unless you are sure
+the program has no bugs.  However, it can be reasonable to install a
+stripped executable for actual execution while saving the unstripped
+executable elsewhere in case there is a bug.
+
+@comment The gratuitous blank line here is to make the table look better
+@comment in the printed Make manual.  Please leave it in.
+@item clean
+
+Delete all files from the current directory that are normally created by
+building the program.  Don't delete the files that record the
+configuration.  Also preserve files that could be made by building, but
+normally aren't because the distribution comes with them.
+
+Delete @file{.dvi} files here if they are not part of the distribution.
+
+@item distclean
+Delete all files from the current directory that are created by
+configuring or building the program.  If you have unpacked the source
+and built the program without creating any other files, @samp{make
+distclean} should leave only the files that were in the distribution.
+
+@item mostlyclean
+Like @samp{clean}, but may refrain from deleting a few files that people
+normally don't want to recompile.  For example, the @samp{mostlyclean}
+target for GCC does not delete @file{libgcc.a}, because recompiling it
+is rarely necessary and takes a lot of time.
+
+@item maintainer-clean
+Delete almost everything from the current directory that can be
+reconstructed with this Makefile.  This typically includes everything
+deleted by @code{distclean}, plus more: C source files produced by
+Bison, tags tables, Info files, and so on.
+
+The reason we say ``almost everything'' is that running the command
+@samp{make maintainer-clean} should not delete @file{configure} even if
+@file{configure} can be remade using a rule in the Makefile.  More generally,
+@samp{make maintainer-clean} should not delete anything that needs to
+exist in order to run @file{configure} and then begin to build the
+program.  This is the only exception; @code{maintainer-clean} should
+delete everything else that can be rebuilt.
+
+The @samp{maintainer-clean} target is intended to be used by a maintainer of
+the package, not by ordinary users.  You may need special tools to
+reconstruct some of the files that @samp{make maintainer-clean} deletes.
+Since these files are normally included in the distribution, we don't
+take care to make them easy to reconstruct.  If you find you need to
+unpack the full distribution again, don't blame us.
+
+To help make users aware of this, the commands for the special
+@code{maintainer-clean} target should start with these two:
+
+@smallexample
+@@echo 'This command is intended for maintainers to use; it'
+@@echo 'deletes files that may need special tools to rebuild.'
+@end smallexample
+
+@item TAGS
+Update a tags table for this program.
+@c ADR: how?
+
+@item info
+Generate any Info files needed.  The best way to write the rules is as
+follows:
+
+@smallexample
+info: foo.info
+
+foo.info: foo.texi chap1.texi chap2.texi
+        $(MAKEINFO) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{MAKEINFO} in the Makefile.  It should
+run the @code{makeinfo} program, which is part of the Texinfo
+distribution.
+
+Normally a GNU distribution comes with Info files, and that means the
+Info files are present in the source directory.  Therefore, the Make
+rule for an info file should update it in the source directory.  When
+users build the package, ordinarily Make will not update the Info files
+because they will already be up to date.
+
+@item dvi
+Generate DVI files for all Texinfo documentation.
+For example:
+
+@smallexample
+dvi: foo.dvi
+
+foo.dvi: foo.texi chap1.texi chap2.texi
+        $(TEXI2DVI) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{TEXI2DVI} in the Makefile.  It should
+run the program @code{texi2dvi}, which is part of the Texinfo
+distribution.@footnote{@code{texi2dvi} uses @TeX{} to do the real work
+of formatting. @TeX{} is not distributed with Texinfo.}  Alternatively,
+write just the dependencies, and allow GNU @code{make} to provide the command.
+
+@item dist
+Create a distribution tar file for this program.  The tar file should be
+set up so that the file names in the tar file start with a subdirectory
+name which is the name of the package it is a distribution for.  This
+name can include the version number.
+
+For example, the distribution tar file of GCC version 1.40 unpacks into
+a subdirectory named @file{gcc-1.40}.
+
+The easiest way to do this is to create a subdirectory appropriately
+named, use @code{ln} or @code{cp} to install the proper files in it, and
+then @code{tar} that subdirectory.
+
+Compress the tar file file with @code{gzip}.  For example, the actual
+distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
+
+The @code{dist} target should explicitly depend on all non-source files
+that are in the distribution, to make sure they are up to date in the
+distribution.
+@ifset CODESTD
+@xref{Releases, , Making Releases}.
+@end ifset
+@ifclear CODESTD
+@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
+@end ifclear
+
+@item check
+Perform self-tests (if any).  The user must build the program before
+running the tests, but need not install the program; you should write
+the self-tests so that they work when the program is built but not
+installed.
+@end table
+
+The following targets are suggested as conventional names, for programs
+in which they are useful.
+
+@table @code
+@item installcheck
+Perform installation tests (if any).  The user must build and install
+the program before running the tests.  You should not assume that
+@file{$(bindir)} is in the search path.
+
+@item installdirs
+It's useful to add a target named @samp{installdirs} to create the
+directories where files are installed, and their parent directories.
+There is a script called @file{mkinstalldirs} which is convenient for
+this; you can find it in the Texinfo package.
+@c It's in /gd/gnu/lib/mkinstalldirs.
+You can use a rule like this:
+
+@comment This has been carefully formatted to look decent in the Make manual.
+@comment Please be sure not to make it extend any further to the right.--roland
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+        $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
+                                $(libdir) $(infodir) \
+                                $(mandir)
+@end smallexample
+
+This rule should not modify the directories where compilation is done.
+It should do nothing but create installation directories.
+@end table
+
+@node Install Command Categories
+@section Install Command Categories
+
+@cindex pre-installation commands
+@cindex post-installation commands
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.
+
+Normal commands move files into their proper places, and set their
+modes.  They may not alter any files except the ones that come entirely
+from the package they belong to.
+
+Pre-installation and post-installation commands may alter other files;
+in particular, they can edit global configuration files or data bases.
+
+Pre-installation commands are typically executed before the normal
+commands, and post-installation commands are typically run after the
+normal commands.
+
+The most common use for a post-installation command is to run
+@code{install-info}.  This cannot be done with a normal command, since
+it alters a file (the Info directory) which does not come entirely and
+solely from the package being installed.  It is a post-installation
+command because it needs to be done after the normal command which
+installs the package's Info files.
+
+Most programs don't need any pre-installation commands, but we have the
+feature just in case it is needed.
+
+To classify the commands in the @code{install} rule into these three
+categories, insert @dfn{category lines} among them.  A category line
+specifies the category for the commands that follow.
+
+A category line consists of a tab and a reference to a special Make
+variable, plus an optional comment at the end.  There are three
+variables you can use, one for each category; the variable name
+specifies the category.  Category lines are no-ops in ordinary execution
+because these three Make variables are normally undefined (and you
+@emph{should not} define them in the makefile).
+
+Here are the three possible category lines, each with a comment that
+explains what it means:
+
+@smallexample
+        $(PRE_INSTALL)     # @r{Pre-install commands follow.}
+        $(POST_INSTALL)    # @r{Post-install commands follow.}
+        $(NORMAL_INSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+If you don't use a category line at the beginning of the @code{install}
+rule, all the commands are classified as normal until the first category
+line.  If you don't use any category lines, all the commands are
+classified as normal.
+
+These are the category lines for @code{uninstall}:
+
+@smallexample
+        $(PRE_UNINSTALL)     # @r{Pre-uninstall commands follow.}
+        $(POST_UNINSTALL)    # @r{Post-uninstall commands follow.}
+        $(NORMAL_UNINSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+Typically, a pre-uninstall command would be used for deleting entries
+from the Info directory.
+
+If the @code{install} or @code{uninstall} target has any dependencies
+which act as subroutines of installation, then you should start
+@emph{each} dependency's commands with a category line, and start the
+main target's commands with a category line also.  This way, you can
+ensure that each command is placed in the right category regardless of
+which of the dependencies actually run.
+
+Pre-installation and post-installation commands should not run any
+programs except for these:
+
+@example
+[ basename bash cat chgrp chmod chown cmp cp dd diff echo
+egrep expand expr false fgrep find getopt grep gunzip gzip
+hostname install install-info kill ldconfig ln ls md5sum
+mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
+test touch true uname xargs yes
+@end example
+
+@cindex binary packages
+The reason for distinguishing the commands in this way is for the sake
+of making binary packages.  Typically a binary package contains all the
+executables and other files that need to be installed, and has its own
+method of installing them---so it does not need to run the normal
+installation commands.  But installing the binary package does need to
+execute the pre-installation and post-installation commands.
+
+Programs to build binary packages work by extracting the
+pre-installation and post-installation commands.  Here is one way of
+extracting the pre-installation commands:
+
+@smallexample
+make -n install -o all \
+      PRE_INSTALL=pre-install \
+      POST_INSTALL=post-install \
+      NORMAL_INSTALL=normal-install \
+  | gawk -f pre-install.awk
+@end smallexample
+
+@noindent
+where the file @file{pre-install.awk} could contain this:
+
+@smallexample
+$0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ @{on = 0@}
+on @{print $0@}
+$0 ~ /^\t[ \t]*pre_install[ \t]*$/ @{on = 1@}
+@end smallexample
+
+The resulting file of pre-installation commands is executed as a shell
+script as part of installing the binary package.

make.1

@@ -5,17 +5,16 @@ make \- GNU make utility to maintain groups of programs
 .B "make "
 [
 .B \-f
-makefile ] [ option ] ...
+.I makefile
+] [ option ] ...
 target ...
 .SH WARNING
-This man paage is an extract of the documentation of
+This man page is an extract of the documentation of
 .I GNU make .
 It is updated only occasionally, because the GNU project does not use nroff.
 For complete, current documentation, refer to the Info file
-.B make
-or the DVI file
-.B make.dvi
-which are made from the Texinfo source file
+.B make.info
+which is made from the Texinfo source file
 .BR make.texinfo .
 .SH DESCRIPTION
 .LP
@@ -24,7 +23,7 @@ The purpose of the
 utility is to determine automatically which
 pieces of a large program need to be recompiled, and issue the commands to
 recompile them.
-This manual describes the GNU implementation of
+The manual describes the GNU implementation of
 .IR make ,
 which was written by Richard Stallman and Roland McGrath.
 Our examples show C programs, since they are most common, but you can use
@@ -110,7 +109,7 @@ or if the target does not exist.
 .B \-b
 .TP 0.5i
 .B \-m
-These options are ignored for compatibility with other versions of 
+These options are ignored for compatibility with other versions of
 .IR make .
 .TP 0.5i
 .BI "\-C " dir
@@ -157,7 +156,7 @@ If several
 .B \-I
 options are used to specify several directories, the directories are
 searched in the order specified.
-Unlike the arguments to other flags of 
+Unlike the arguments to other flags of
 .IR make ,
 directories given with
 .B \-I
@@ -236,11 +235,11 @@ Silent operation; do not print the commands as they are executed.
 Cancel the effect of the
 .B \-k
 option.
-This is never necessary except in a recursive 
+This is never necessary except in a recursive
 .I make
 where
 .B \-k
-might be inherited from the top-level 
+might be inherited from the top-level
 .I make
 via MAKEFLAGS or if you set
 .B \-k
@@ -254,15 +253,10 @@ future invocations of
 .IR make .
 .TP 0.5i
 .B \-v
-Print the version of the 
+Print the version of the
 .I make
 program plus a copyright, a list of authors and a notice that there
 is no warranty.
-After this information is printed, processing continues normally.
-To get this information without doing anything else, use
-.B make
-.B \-v
-.BI \-f /dev/null.
 .TP 0.5i
 .B \-w
 Print a message containing the working directory
@@ -285,15 +279,10 @@ it is almost the same as running a
 .I touch
 command on the given file before running
 .IR make ,
-except that the modification time is changed only in the imagination of 
+except that the modification time is changed only in the imagination of
 .IR make .
 .SH "SEE ALSO"
-.PD 0
-.TP 2.0i
-/usr/local/doc/gnumake.dvi
-.I
-The GNU Make Manual
-.PD
+.I "The GNU Make Manual"
 .SH BUGS
 See the chapter `Problems and Bugs' in
 .I "The GNU Make Manual" .

make.h

@@ -1,5 +1,5 @@
 /* Miscellaneous global declarations and portability cruft for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,94,95,96,97,99 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,7 +14,8 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 /* AIX requires this to be the first thing in the file.  */
 #if defined (_AIX) && !defined (__GNUC__)
@@ -25,16 +26,39 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
    using -I. -I$srcdir will use ./config.h rather than $srcdir/config.h
    (which it would do because make.h was found in $srcdir).  */
 #include <config.h>
-#undef	HAVE_CONFIG_H
-#define HAVE_CONFIG_H
+#undef  HAVE_CONFIG_H
+#define HAVE_CONFIG_H 1
 
-#ifdef	CRAY
+
+/* Use prototypes if available.  */
+#if defined (__cplusplus) || (defined (__STDC__) && __STDC__)
+# undef  PARAMS
+# define PARAMS(protos)  protos
+#else /* Not C++ or ANSI C.  */
+# undef  PARAMS
+# define PARAMS(protos)  ()
+#endif /* C++ or ANSI C.  */
+
+
+/* For now, set gettext macro to a no-op.  */
+#undef _
+#undef N_
+#define _(s)    s
+#define N_(s)   s
+
+
+#ifdef  CRAY
 /* This must happen before #include <signal.h> so
    that the declaration therein is changed.  */
-#define	signal	bsdsignal
+# define signal bsdsignal
 #endif
 
-#define _GNU_SOURCE
+/* If we're compiling for the dmalloc debugger, turn off string inlining.  */
+#if defined(HAVE_DMALLOC_H) && defined(__GNUC__)
+# define __NO_STRING_INLINES
+#endif
+
+#define _GNU_SOURCE 1
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <signal.h>
@@ -44,297 +68,438 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 /* SCO 3.2 "devsys 4.2" has a prototype for `ftime' in <time.h> that bombs
    unless <sys/timeb.h> has been included first.  Does every system have a
    <sys/timeb.h>?  If any does not, configure should check for it.  */
-#include <sys/timeb.h>
+# include <sys/timeb.h>
 #endif
 #include <time.h>
 #include <errno.h>
 
-#ifndef	errno
+#ifndef errno
 extern int errno;
 #endif
 
-#ifndef	isblank
-#define	isblank(c)	((c) == ' ' || (c) == '\t')
+/* A shortcut for EINTR checking.  Note you should be careful when negating
+   this!  That might not mean what you want if EINTR is not available.  */
+#ifdef EINTR
+# define EINTR_SET (errno == EINTR)
+#else
+# define EINTR_SET (0)
 #endif
 
-#ifdef	HAVE_UNISTD_H
-#include <unistd.h>
+#ifndef isblank
+# define isblank(c)     ((c) == ' ' || (c) == '\t')
+#endif
+
+#ifdef  HAVE_UNISTD_H
+# include <unistd.h>
 /* Ultrix's unistd.h always defines _POSIX_VERSION, but you only get
    POSIX.1 behavior with `cc -YPOSIX', which predefines POSIX itself!  */
-#if defined (_POSIX_VERSION) && !defined (ultrix)
-#define	POSIX
-#endif
+# if defined (_POSIX_VERSION) && !defined (ultrix) && !defined (VMS)
+#  define POSIX 1
+# endif
 #endif
 
 /* Some systems define _POSIX_VERSION but are not really POSIX.1.  */
-#if (defined (butterfly) || defined (__arm) || \
-     (defined (__mips) && defined (_SYSTYPE_SVR3)) || \
-     (defined (sequent) && defined (i386)))
-#undef POSIX
+#if (defined (butterfly) || defined (__arm) || (defined (__mips) && defined (_SYSTYPE_SVR3)) || (defined (sequent) && defined (i386)))
+# undef POSIX
 #endif
 
 #if !defined (POSIX) && defined (_AIX) && defined (_POSIX_SOURCE)
-#define POSIX
+# define POSIX 1
 #endif
 
-#if !defined (HAVE_SYS_SIGLIST) && defined (HAVE__SYS_SIGLIST)
-#define	sys_siglist	_sys_siglist
-#define	HAVE_SYS_SIGLIST	/* Now we have it.  */
-
-/* It was declared in <signal.h>, with who knows what type.
-   Don't declare it again and risk conflicting.  */
-#define	SYS_SIGLIST_DECLARED
-#endif
-
-#ifdef HAVE_SYS_SIGLIST
-#ifndef SYS_SIGLIST_DECLARED
+#if defined (HAVE_SYS_SIGLIST) && !defined (SYS_SIGLIST_DECLARED)
 extern char *sys_siglist[];
 #endif
-#else
-#include "signame.h"
+
+#if !defined (HAVE_SYS_SIGLIST) || !defined (HAVE_STRSIGNAL)
+# include "signame.h"
 #endif
 
 /* Some systems do not define NSIG in <signal.h>.  */
-#ifndef	NSIG
-#ifdef	_NSIG
-#define	NSIG	_NSIG
-#else
-#define	NSIG	32
-#endif
+#ifndef NSIG
+# ifdef _NSIG
+#  define NSIG  _NSIG
+# else
+#  define NSIG  32
+# endif
 #endif
 
-#ifndef	RETSIGTYPE
-#define	RETSIGTYPE	void
+#ifndef RETSIGTYPE
+# define RETSIGTYPE     void
 #endif
 
-#ifndef	sigmask
-#define	sigmask(sig)	(1 << ((sig) - 1))
+#ifndef sigmask
+# define sigmask(sig)   (1 << ((sig) - 1))
 #endif
 
-#ifdef	HAVE_LIMITS_H
-#include <limits.h>
+#ifdef  HAVE_LIMITS_H
+# include <limits.h>
 #endif
-#ifdef	HAVE_SYS_PARAM_H
-#include <sys/param.h>
+#ifdef  HAVE_SYS_PARAM_H
+# include <sys/param.h>
 #endif
 
-#ifndef	PATH_MAX
-#ifndef	POSIX
-#define	PATH_MAX	MAXPATHLEN
-#endif	/* Not POSIX.  */
-#endif	/* No PATH_MAX.  */
+#ifndef PATH_MAX
+# ifndef POSIX
+#  define PATH_MAX      MAXPATHLEN
+# endif
+#endif
 #ifndef MAXPATHLEN
-#define MAXPATHLEN 1024
-#endif	/* No MAXPATHLEN.  */
+# define MAXPATHLEN 1024
+#endif
 
-#ifdef	PATH_MAX
-#define	GET_PATH_MAX	PATH_MAX
-#define	PATH_VAR(var)	char var[PATH_MAX]
+#ifdef  PATH_MAX
+# define GET_PATH_MAX   PATH_MAX
+# define PATH_VAR(var)  char var[PATH_MAX]
 #else
-#define	NEED_GET_PATH_MAX
-extern unsigned int get_path_max ();
-#define	GET_PATH_MAX	(get_path_max ())
-#define	PATH_VAR(var)	char *var = (char *) alloca (GET_PATH_MAX)
+# define NEED_GET_PATH_MAX 1
+# define GET_PATH_MAX   (get_path_max ())
+# define PATH_VAR(var)  char *var = (char *) alloca (GET_PATH_MAX)
+extern unsigned int get_path_max PARAMS ((void));
 #endif
 
-#ifdef	STAT_MACROS_BROKEN
-#ifdef	S_ISREG
-#undef	S_ISREG
-#endif
-#ifdef	S_ISDIR
-#undef	S_ISDIR
-#endif
-#endif	/* STAT_MACROS_BROKEN.  */
-
-#ifndef	S_ISREG
-#define	S_ISREG(mode)	(((mode) & S_IFMT) == S_IFREG)
-#endif
-#ifndef	S_ISDIR
-#define	S_ISDIR(mode)	(((mode) & S_IFMT) == S_IFDIR)
+#ifndef CHAR_BIT
+# define CHAR_BIT 8
 #endif
 
+/* Nonzero if the integer type T is signed.  */
+#define INTEGER_TYPE_SIGNED(t) ((t) -1 < 0)
 
-#if	(defined (STDC_HEADERS) || defined (__GNU_LIBRARY__))
-#include <stdlib.h>
-#include <string.h>
-#define	ANSI_STRING
-#else	/* No standard headers.  */
+/* The minimum and maximum values for the integer type T.
+   Use ~ (t) 0, not -1, for portability to 1's complement hosts.  */
+#define INTEGER_TYPE_MINIMUM(t) \
+  (! INTEGER_TYPE_SIGNED (t) ? (t) 0 : ~ (t) 0 << (sizeof (t) * CHAR_BIT - 1))
+#define INTEGER_TYPE_MAXIMUM(t) (~ (t) 0 - INTEGER_TYPE_MINIMUM (t))
 
-#ifdef HAVE_STRING_H
-#include <string.h>
-#define	ANSI_STRING
+#ifndef CHAR_MAX
+# define CHAR_MAX INTEGER_TYPE_MAXIMUM (char)
+#endif
+
+#ifdef STAT_MACROS_BROKEN
+# ifdef S_ISREG
+#  undef S_ISREG
+# endif
+# ifdef S_ISDIR
+#  undef S_ISDIR
+# endif
+#endif  /* STAT_MACROS_BROKEN.  */
+
+#ifndef S_ISREG
+# define S_ISREG(mode)  (((mode) & S_IFMT) == S_IFREG)
+#endif
+#ifndef S_ISDIR
+# define S_ISDIR(mode)  (((mode) & S_IFMT) == S_IFDIR)
+#endif
+
+#ifdef VMS
+# include <stdio.h>
+# include <types.h>
+# include <unixlib.h>
+# include <unixio.h>
+# include <errno.h>
+# include <perror.h>
+#endif
+
+#ifndef __attribute__
+/* This feature is available in gcc versions 2.5 and later.  */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
+#  define __attribute__(x)
+# endif
+/* The __-protected variants of `format' and `printf' attributes
+   are accepted by gcc versions 2.6.4 (effectively 2.7) and later.  */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7)
+#  define __format__ format
+#  define __printf__ printf
+# endif
+#endif
+
+#if defined (STDC_HEADERS) || defined (__GNU_LIBRARY__)
+# include <stdlib.h>
+# include <string.h>
+# define ANSI_STRING 1
+#else   /* No standard headers.  */
+# ifdef HAVE_STRING_H
+#  include <string.h>
+#  define ANSI_STRING 1
+# else
+#  include <strings.h>
+# endif
+# ifdef HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# else
+extern char *malloc PARAMS ((int));
+extern char *realloc PARAMS ((char *, int));
+extern void free PARAMS ((char *));
+
+extern void abort PARAMS ((void)) __attribute__ ((noreturn));
+extern void exit PARAMS ((int)) __attribute__ ((noreturn));
+# endif /* HAVE_STDLIB_H.  */
+
+#endif /* Standard headers.  */
+
+#if ST_MTIM_NSEC
+# if HAVE_INTTYPES_H
+#  include <inttypes.h>
+# endif
+# define FILE_TIMESTAMP uintmax_t
 #else
-#include <strings.h>
-#endif
-#ifdef	HAVE_MEMORY_H
-#include <memory.h>
+# define FILE_TIMESTAMP time_t
 #endif
 
-extern char *malloc (), *realloc ();
-extern void free ();
+#ifdef  ANSI_STRING
 
-extern void qsort ();
-extern void abort (), exit ();
+# ifndef index
+#  define index(s, c)       strchr((s), (c))
+# endif
+# ifndef rindex
+#  define rindex(s, c)      strrchr((s), (c))
+# endif
 
-#endif	/* Standard headers.  */
+# ifndef bcmp
+#  define bcmp(s1, s2, n)   memcmp ((s1), (s2), (n))
+# endif
+# ifndef bzero
+#  define bzero(s, n)       memset ((s), 0, (n))
+# endif
+# if defined(HAVE_MEMMOVE) && !defined(bcopy)
+#  define bcopy(s, d, n)    memmove ((d), (s), (n))
+# endif
 
-#ifdef	ANSI_STRING
+#else   /* Not ANSI_STRING.  */
 
-#ifndef	index
-#define	index(s, c)	strchr((s), (c))
-#endif
-#ifndef	rindex
-#define	rindex(s, c)	strrchr((s), (c))
+# ifndef bcmp
+extern int bcmp PARAMS ((const char *, const char *, int));
+# endif
+# ifndef bzero
+extern void bzero PARAMS ((char *, int));
 #endif
+# ifndef bcopy
+extern void bcopy PARAMS ((const char *b1, char *b2, int));
+# endif
 
-#ifndef	bcmp
-#define bcmp(s1, s2, n)	memcmp ((s1), (s2), (n))
-#endif
-#ifndef	bzero
-#define bzero(s, n)	memset ((s), 0, (n))
-#endif
-#ifndef	bcopy
-#define bcopy(s, d, n)	memcpy ((d), (s), (n))
-#endif
-
-#else	/* Not ANSI_STRING.  */
-
-#ifndef	bcmp
-extern int bcmp ();
-#endif
-#ifndef	bzero
-extern void bzero ();
-#endif
-#ifndef	bcopy
-extern void bcopy ();
-#endif
-
-#endif	/* ANSI_STRING.  */
-#undef	ANSI_STRING
+#endif  /* ANSI_STRING.  */
+#undef  ANSI_STRING
 
 /* SCO Xenix has a buggy macro definition in <string.h>.  */
-#undef	strerror
+#undef  strerror
 
-#ifndef ANSI_STRING
-extern char *strerror ();
+#if !defined(ANSI_STRING) && !defined(__DECC)
+extern char *strerror PARAMS ((int errnum));
 #endif
 
-
-#ifdef	__GNUC__
-#undef	alloca
-#define	alloca(n)	__builtin_alloca (n)
-#else	/* Not GCC.  */
-#ifdef	HAVE_ALLOCA_H
-#include <alloca.h>
-#else	/* Not HAVE_ALLOCA_H.  */
-#ifndef	_AIX
+#ifdef __GNUC__
+# undef alloca
+# define alloca(n)      __builtin_alloca (n)
+#else   /* Not GCC.  */
+# ifdef HAVE_ALLOCA_H
+#  include <alloca.h>
+# else /* Not HAVE_ALLOCA_H.  */
+#  ifndef _AIX
 extern char *alloca ();
-#endif	/* Not AIX.  */
-#endif	/* HAVE_ALLOCA_H.  */
-#endif	/* GCC.  */
+#  endif /* Not AIX.  */
+# endif /* HAVE_ALLOCA_H.  */
+#endif /* GCC.  */
 
-#ifndef	iAPX286
-#define streq(a, b) \
-  ((a) == (b) || \
-   (*(a) == *(b) && (*(a) == '\0' || !strcmp ((a) + 1, (b) + 1))))
+/* ISDIGIT offers the following features:
+   - Its arg may be any int or unsigned int; it need not be an unsigned char.
+   - It's guaranteed to evaluate its argument exactly once.
+      NOTE!  Make relies on this behavior, don't change it!
+   - It's typically faster.
+   Posix 1003.2-1992 section 2.5.2.1 page 50 lines 1556-1558 says that
+   only '0' through '9' are digits.  Prefer ISDIGIT to isdigit() unless
+   it's important to use the locale's definition of `digit' even when the
+   host does not conform to Posix.  */
+#define ISDIGIT(c) ((unsigned) (c) - '0' <= 9)
+
+#ifndef iAPX286
+# define streq(a, b) \
+   ((a) == (b) || \
+    (*(a) == *(b) && (*(a) == '\0' || !strcmp ((a) + 1, (b) + 1))))
+# ifdef HAVE_CASE_INSENSITIVE_FS
+/* This is only used on Windows/DOS platforms, so we assume strcmpi().  */
+#  define strieq(a, b) \
+    ((a) == (b) || \
+     (tolower(*(a)) == tolower(*(b)) && (*(a) == '\0' || !strcmpi ((a) + 1, (b) + 1))))
+# else
+#  define strieq(a, b) streq(a, b)
+# endif
 #else
 /* Buggy compiler can't handle this.  */
-#define streq(a, b) (strcmp ((a), (b)) == 0)
+# define streq(a, b) (strcmp ((a), (b)) == 0)
+# define strieq(a, b) (strcmp ((a), (b)) == 0)
 #endif
+#define strneq(a, b, l) (strncmp ((a), (b), (l)) == 0)
 
 /* Add to VAR the hashing value of C, one character in a name.  */
-#define	HASH(var, c) \
+#define HASH(var, c) \
   ((var += (c)), (var = ((var) << 7) + ((var) >> 20)))
+#ifdef HAVE_CASE_INSENSITIVE_FS /* Fold filenames */
+# define HASHI(var, c) \
+   ((var += tolower((c))), (var = ((var) << 7) + ((var) >> 20)))
+#else
+# define HASHI(var, c) HASH(var,c)
+#endif
 
 #if defined(__GNUC__) || defined(ENUM_BITFIELDS)
-#define	ENUM_BITFIELD(bits)	:bits
+# define ENUM_BITFIELD(bits)    :bits
 #else
-#define	ENUM_BITFIELD(bits)
+# define ENUM_BITFIELD(bits)
 #endif
 
-#ifdef __MSDOS__
-#define PATH_SEPARATOR_CHAR ';'
+#if defined(__MSDOS__) || defined(WINDOWS32)
+# define PATH_SEPARATOR_CHAR ';'
 #else
-#define PATH_SEPARATOR_CHAR ':'
+# if defined(VMS)
+#  define PATH_SEPARATOR_CHAR ','
+# else
+#  define PATH_SEPARATOR_CHAR ':'
+# endif
 #endif
+
+#ifdef WINDOWS32
+# include <fcntl.h>
+# include <malloc.h>
+# define pipe(p) _pipe(p, 512, O_BINARY)
+# define kill(pid,sig) w32_kill(pid,sig)
+
+extern void sync_Path_environment(void);
+extern int kill(int pid, int sig);
+extern int safe_stat(char *file, struct stat *sb);
+extern char *end_of_token_w32(char *s, char stopchar);
+extern int find_and_set_default_shell(char *token);
+
+/* indicates whether or not we have Bourne shell */
+extern int no_default_sh_exe;
+
+/* is default_shell unixy? */
+extern int unixy_shell;
+#endif  /* WINDOWS32 */
+
+struct floc
+  {
+    char *filenm;
+    unsigned long lineno;
+  };
+#define NILF ((struct floc *)0)
+
 
-extern void die ();
-extern void message (), fatal (), error ();
-extern void makefile_error (), makefile_fatal ();
-extern void pfatal_with_name (), perror_with_name ();
-extern char *savestring (), *concat ();
-extern char *xmalloc (), *xrealloc ();
-extern char *find_next_token (), *next_token (), *end_of_token ();
-extern void collapse_continuations (), remove_comments ();
-extern char *sindex (), *lindex ();
-extern int alpha_compare ();
-extern void print_spaces ();
-extern struct dep *copy_dep_chain ();
-extern char *find_char_unquote (), *find_percent ();
-
-#ifndef	NO_ARCHIVES
-extern int ar_name ();
-extern void ar_parse_name ();
-extern int ar_touch ();
-extern time_t ar_member_date ();
+/* Fancy processing for variadic functions in both ANSI and pre-ANSI
+   compilers.  */
+#if defined __STDC__ && __STDC__
+extern void message (int prefix, const char *fmt, ...)
+                     __attribute__ ((__format__ (__printf__, 2, 3)));
+extern void error (const struct floc *flocp, const char *fmt, ...)
+                   __attribute__ ((__format__ (__printf__, 2, 3)));
+extern void fatal (const struct floc *flocp, const char *fmt, ...)
+                   __attribute__ ((noreturn, __format__ (__printf__, 2, 3)));
+#else
+extern void message ();
+extern void error ();
+extern void fatal ();
 #endif
 
-extern void dir_load ();
-extern int dir_file_exists_p (), file_exists_p (), file_impossible_p ();
-extern void file_impossible ();
-extern char *dir_name ();
+extern void die PARAMS ((int)) __attribute__ ((noreturn));
+extern void log_working_directory PARAMS ((int));
+extern void pfatal_with_name PARAMS ((char *)) __attribute__ ((noreturn));
+extern void perror_with_name PARAMS ((char *, char *));
+extern char *savestring PARAMS ((const char *, unsigned int));
+extern char *concat PARAMS ((char *, char *, char *));
+extern char *xmalloc PARAMS ((unsigned int));
+extern char *xrealloc PARAMS ((char *, unsigned int));
+extern char *xstrdup PARAMS ((const char *));
+extern char *find_next_token PARAMS ((char **, unsigned int *));
+extern char *next_token PARAMS ((char *));
+extern char *end_of_token PARAMS ((char *));
+extern void collapse_continuations PARAMS ((char *));
+extern void remove_comments PARAMS((char *));
+extern char *sindex PARAMS ((const char *, unsigned int, \
+                             const char *, unsigned int));
+extern char *lindex PARAMS ((const char *, const char *, int));
+extern int alpha_compare PARAMS ((const void *, const void *));
+extern void print_spaces PARAMS ((unsigned int));
+extern char *find_char_unquote PARAMS ((char *, char *, int));
+extern char *find_percent PARAMS ((char *));
 
-extern void define_default_variables ();
-extern void set_default_suffixes (), install_default_suffix_rules ();
-extern void install_default_implicit_rules (), count_implicit_rule_limits ();
-extern void convert_to_pattern (), create_pattern_rule ();
+#ifndef NO_ARCHIVES
+extern int ar_name PARAMS ((char *));
+extern void ar_parse_name PARAMS ((char *, char **, char **));
+extern int ar_touch PARAMS ((char *));
+extern time_t ar_member_date PARAMS ((char *));
+#endif
 
-extern void build_vpath_lists (), construct_vpath_list ();
-extern int vpath_search ();
+extern int dir_file_exists_p PARAMS ((char *, char *));
+extern int file_exists_p PARAMS ((char *));
+extern int file_impossible_p PARAMS ((char *));
+extern void file_impossible PARAMS ((char *));
+extern char *dir_name PARAMS ((char *));
 
-extern void construct_include_path ();
-extern void uniquize_deps ();
+extern void define_default_variables PARAMS ((void));
+extern void set_default_suffixes PARAMS ((void));
+extern void install_default_suffix_rules PARAMS ((void));
+extern void install_default_implicit_rules PARAMS ((void));
 
-extern int update_goal_chain ();
-extern void notice_finished_file ();
+extern void build_vpath_lists PARAMS ((void));
+extern void construct_vpath_list PARAMS ((char *pattern, char *dirpath));
+extern int vpath_search PARAMS ((char **file, FILE_TIMESTAMP *mtime_ptr));
+extern int gpath_search PARAMS ((char *file, int len));
 
-extern void user_access (), make_access (), child_access ();
+extern void construct_include_path PARAMS ((char **arg_dirs));
 
+extern void user_access PARAMS ((void));
+extern void make_access PARAMS ((void));
+extern void child_access PARAMS ((void));
 
-#ifdef	HAVE_VFORK_H
-#include <vfork.h>
+#ifdef  HAVE_VFORK_H
+# include <vfork.h>
 #endif
 
 /* We omit these declarations on non-POSIX systems which define _POSIX_VERSION,
-   because such systems often declare the in header files anyway.  */
+   because such systems often declare them in header files anyway.  */
 
-#if !defined (__GNU_LIBRARY__) && !defined (POSIX) && !defined (_POSIX_VERSION)
+#if !defined (__GNU_LIBRARY__) && !defined (POSIX) && !defined (_POSIX_VERSION) && !defined(WINDOWS32)
 
 extern long int atol ();
+# ifndef VMS
 extern long int lseek ();
+# endif
 
-#endif	/* Not GNU C library or POSIX.  */
+#endif  /* Not GNU C library or POSIX.  */
 
-#ifdef	HAVE_GETCWD
+#ifdef  HAVE_GETCWD
 extern char *getcwd ();
+# ifdef VMS
+extern char *getwd PARAMS ((char *));
+# endif
 #else
 extern char *getwd ();
-#define	getcwd(buf, len)	getwd (buf)
+# define getcwd(buf, len)       getwd (buf)
 #endif
 
+extern const struct floc *reading_file;
+
 extern char **environ;
 
-extern char *reading_filename;
-extern unsigned int *reading_lineno_ptr;
-
 extern int just_print_flag, silent_flag, ignore_errors_flag, keep_going_flag;
 extern int debug_flag, print_data_base_flag, question_flag, touch_flag;
-extern int env_overrides, no_builtin_rules_flag, print_version_flag;
-extern int print_directory_flag, warn_undefined_variables_flag;
-extern int posix_pedantic;
+extern int env_overrides, no_builtin_rules_flag, no_builtin_variables_flag;
+extern int print_version_flag, print_directory_flag;
+extern int warn_undefined_variables_flag, posix_pedantic;
+extern int clock_skew_detected;
+
+/* can we run commands via 'sh -c xxx' or must we use batch files? */
+extern int batch_mode_shell;
 
 extern unsigned int job_slots;
+extern int job_fds[2];
+extern int job_rfd;
+#ifndef NO_FLOAT
 extern double max_load_average;
+#else
+extern int max_load_average;
+#endif
 
 extern char *program;
 extern char *starting_directory;
@@ -346,6 +511,41 @@ extern unsigned int commands_started;
 extern int handling_fatal_signal;
 
 
+#ifndef MIN
+#define MIN(_a,_b) ((_a)<(_b)?(_a):(_b))
+#endif
+#ifndef MAX
+#define MAX(_a,_b) ((_a)>(_b)?(_a):(_b))
+#endif
+
 #define DEBUGPR(msg) \
   do if (debug_flag) { print_spaces (depth); printf (msg, file->name); \
-		       fflush (stdout); } while (0)
+                       fflush (stdout); } while (0)
+
+#ifdef VMS
+# ifndef EXIT_FAILURE
+#  define EXIT_FAILURE 3
+# endif
+# ifndef EXIT_SUCCESS
+#  define EXIT_SUCCESS 1
+# endif
+# ifndef EXIT_TROUBLE
+#  define EXIT_TROUBLE 2
+# endif
+#else
+# ifndef EXIT_FAILURE
+#  define EXIT_FAILURE 2
+# endif
+# ifndef EXIT_SUCCESS
+#  define EXIT_SUCCESS 0
+# endif
+# ifndef EXIT_TROUBLE
+#  define EXIT_TROUBLE 1
+# endif
+#endif
+
+/* Set up heap debugging library dmalloc.  */
+
+#ifdef HAVE_DMALLOC_H
+#include <dmalloc.h>
+#endif

make.lnk

@@ -0,0 +1,5 @@
+FROM LIB:cres.o "commands.o"+"job.o"+"dir.o"+"file.o"+"misc.o"+"main.o"+"read.o"+"remake.o"+"rule.o"+"implicit.o"+"default.o"+"variable.o"+"expand.o"+"function.o"+"vpath.o"+"version.o"+"ar.o"+"arscan.o"+"signame.o"+"remote-stub.o"+"getopt.o"+"getopt1.o"+"alloca.o"+"amiga.o"
+TO "make.new"
+LIB glob/glob.lib LIB:sc.lib LIB:amiga.lib
+QUIET
+

makefile.com

@@ -0,0 +1,71 @@
+$!
+$! Makefile.com - builds GNU Make for VMS
+$!
+$! P1 is non-empty if you want to link with the VAXCRTL library instead
+$!    of the shareable executable
+$! P2 = DEBUG will build an image with debug information
+$!
+$! In case of problems with the install you might contact me at
+$! zinser@decus.decus.de (preferred) or martin_zinser@exchange.de
+$!
+$! Look for the compiler used
+$!
+$ lval = ""
+$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$  then
+$   if f$trnlnm("SYS").eqs."" then def/nolog sys sys$library:
+$   ccopt = ""
+$  else
+$   ccopt = "/decc/prefix=all"
+$   if f$trnlnm("SYS").eqs.""
+$    then
+$     if f$trnlnm("DECC$LIBRARY_INCLUDE").nes.""
+$      then
+$       define sys decc$library_include:
+$      else
+$       if f$search("SYS$COMMON:[DECC$LIB.REFERENCE]DECC$RTLDEF.DIR").nes."" -
+           then lval = "SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF],"
+$       if f$search("SYS$COMMON:[DECC$LIB.REFERENCE]SYS$STARLET_C.DIR").nes."" -
+           then lval = lval+"SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C],"
+$       lval=lval+"SYS$LIBRARY:"
+$       define sys 'lval
+$      endif
+$   endif
+$ endif
+$!
+$! Should we build a debug image
+$!
+$ if (p2.eqs."DEBUG")
+$  then
+$   ccopt = ccopt + "/noopt/debug"
+$   lopt = "/debug"
+$ else
+$   lopt = ""
+$ endif
+$ filelist = "alloca ar arscan commands default dir expand file function implicit job main misc read remake remote-stub rule signame variable version vmsfunctions vmsify vpath [.glob]glob [.glob]fnmatch getopt1 getopt"
+$ copy config.h-vms config.h
+$ n=0
+$ open/write optf make.opt
+$ loop:
+$ cfile = f$elem(n," ",filelist)
+$ if cfile .eqs. " " then goto linkit
+$ write sys$output "Compiling ''cfile'..."
+$ call compileit 'cfile' 'p1'
+$ n = n + 1
+$ goto loop
+$ linkit:
+$ close optf
+$ if p1 .nes. "" then goto link_using_library
+$ link/exe=make make.opt/opt'lopt
+$ exit
+$ link_using_library:
+$ link/exe=make make.opt/opt,sys$library:vaxcrtl/lib'lopt
+$!
+$ compileit : subroutine
+$ ploc = f$locate("]",p1)
+$ filnam = p1
+$ if ploc .lt. f$length(p1) then filnam=f$extract(ploc+1,100,p1)
+$ write optf "''filnam'"
+$ cc'ccopt'/include=([],[.glob])/define=("allocated_variable_expand_for_file=alloc_var_expand_for_file","unlink=remove","HAVE_CONFIG_H","VMS") 'p1'
+$ exit
+$ endsubroutine : compileit

makefile.vms

@@ -0,0 +1,122 @@
+# Copyright (C) 1988, 1989, 1996, 1997 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# VMS extensions from GNU Make 3.60 imported by
+#  Klaus Kämpf (kkaempf@progis.de) of proGIS Software, Aachen, Germany
+#
+# GNU Make is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Make; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+CC = cc/warn
+CP = copy
+
+%.obj: %.c
+	$(CC) $(CFLAGS)/obj=$@ $<
+#
+#	Makefile for GNU Make
+#
+
+CFLAGS = $(defines) /debug/noopt/include=([],[.glob])
+#LDFLAGS = /deb
+LDFLAGS =
+
+defines = /define=("unlink=remove","HAVE_CONFIG_H","VMS","allocated_variable_expand_for_file=alloc_var_expand_for_file")
+
+LOAD_AVG = /define="NO_LDAV"
+
+# If you don't want archive support, comment these out.
+ARCHIVES = ,ar.obj,arscan.obj
+ARCHIVES_SRC = ar.c arscan.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.
+# if on vax, uncomment the following line
+#LOADLIBES = ,c.opt/opt
+LOADLIBES =,sys$$library:vaxcrtl.olb/lib
+
+# If your system doesn't have alloca, or the one provided is bad,
+# get it from the Emacs distribution and define these.
+ALLOCA = ,alloca.obj
+ALLOCASRC = alloca.c
+
+# If there are remote execution facilities defined,
+# enable them with switches here (see remote-*.c).
+REMOTE =
+
+# Any extra object files your system needs.
+extras = ,signame.obj,remote-stub.obj,vmsfunctions.obj,vmsify.obj
+#,directory.obj
+# as an alternative:
+glob = ,[.glob]glob.obj,[.glob]fnmatch.obj
+getopt = ,getopt.obj,getopt1.obj
+# Directory to install `make' in.
+bindir = []
+# Directory to install the man page in.
+mandir = []
+# Number to put on the man page filename.
+manext = 1
+
+objs = commands.obj,job.obj,dir.obj,file.obj,misc.obj,\
+       main.obj,read.obj,remake.obj,rule.obj,implicit.obj,\
+       default.obj,variable.obj,expand.obj,function.obj,\
+       vpath.obj,version.obj$(ARCHIVES)$(ALLOCA)$(extras)$(getopt)$(glob)
+srcs = commands.c job.c dir.c file.c misc.c \
+	main.c read.c remake.c rule.c implicit.c \
+	default.c variable.c expand.c function.c \
+	vpath.c version.c vmsfunctions.c vmsify.c $(ARCHIVES_SRC) $(ALLOCASRC) \
+	commands.h dep.h filedef.h job.h make.h rule.h variable.h
+
+
+.PHONY: all doc
+all: config.h make.exe
+
+doc: make.info make.dvi
+
+
+make.exe: $(objs)
+	$(LD)$(LDFLAGS)/exe=$@ $^$(LOADLIBES)
+
+.PHONY: clean realclean
+clean:
+	-$(RM) make.exe;,*.obj;*
+
+# Automatically generated dependencies.
+commands.obj: commands.c make.h dep.h commands.h filedef.h variable.h job.h
+job.obj: job.c make.h commands.h job.h filedef.h variable.h
+dir.obj: dir.c make.h
+file.obj: file.c make.h commands.h dep.h filedef.h variable.h
+misc.obj: misc.c make.h dep.h
+main.obj: main.c make.h commands.h dep.h filedef.h variable.h job.h
+read.obj: read.c make.h commands.h dep.h filedef.h variable.h
+remake.obj: remake.c make.h commands.h job.h dep.h filedef.h
+rule.obj: rule.c make.h commands.h dep.h filedef.h variable.h rule.h
+implicit.obj: implicit.c make.h rule.h dep.h filedef.h
+default.obj: default.c make.h rule.h dep.h filedef.h commands.h variable.h
+variable.obj: variable.c make.h commands.h variable.h dep.h filedef.h
+expand.obj: expand.c make.h commands.h filedef.h variable.h
+function.obj: function.c make.h variable.h dep.h commands.h job.h
+vpath.obj: vpath.c make.h filedef.h variable.h
+version.obj: version.c
+arscan.obj: arscan.c
+ar.obj: ar.c make.h filedef.h
+signame.obj: signame.c
+remote-stub.obj: remote-stub.c
+[.glob]glob.obj: [.glob]glob.c
+[.glob]fnmatch.obj: [.glob]fnmatch.c
+getopt.obj: getopt.c
+getopt1.obj: getopt1.c
+
+config.h: config.h-vms
+	$(CP) $< $@

misc.c

@@ -1,5 +1,5 @@
 /* Miscellaneous generic support functions for GNU Make.
-Copyright (C) 1988, 89, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93,94,95,97 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,23 +14,59 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
 #include "dep.h"
 
 
+/* Variadic functions.  We go through contortions to allow proper function
+   prototypes for both ANSI and pre-ANSI C compilers, and also for those
+   which support stdarg.h vs. varargs.h, and finally those which have
+   vfprintf(), etc. and those who have _doprnt... or nothing.
+
+   This fancy stuff all came from GNU fileutils, except for the VA_PRINTF and
+   VA_END macros used here since we have multiple print functions.  */
+
+#if HAVE_VPRINTF || HAVE_DOPRNT
+# define HAVE_STDVARARGS 1
+# if __STDC__
+#  include <stdarg.h>
+#  define VA_START(args, lastarg) va_start(args, lastarg)
+# else
+#  include <varargs.h>
+#  define VA_START(args, lastarg) va_start(args)
+# endif
+# if HAVE_VPRINTF
+#  define VA_PRINTF(fp, lastarg, args) vfprintf((fp), (lastarg), (args))
+# else
+#  define VA_PRINTF(fp, lastarg, args) _doprnt((lastarg), (args), (fp))
+# endif
+# define VA_END(args) va_end(args)
+#else
+/* # undef HAVE_STDVARARGS */
+# define va_alist a1, a2, a3, a4, a5, a6, a7, a8
+# define va_dcl char *a1, *a2, *a3, *a4, *a5, *a6, *a7, *a8;
+# define VA_START(args, lastarg)
+# define VA_END(args)
+#endif
+
+
 /* Compare strings *S1 and *S2.
    Return negative if the first is less, positive if it is greater,
    zero if they are equal.  */
 
 int
-alpha_compare (s1, s2)
-     char **s1, **s2;
+alpha_compare (v1, v2)
+     const void *v1, *v2;
 {
-  if (**s1 != **s2)
-    return **s1 - **s2;
-  return strcmp (*s1, *s2);
+  const char *s1 = *((char **)v1);
+  const char *s2 = *((char **)v2);
+
+  if (*s1 != *s2)
+    return *s1 - *s2;
+  return strcmp (s1, s2);
 }
 
 /* Discard each backslash-newline combination from LINE.
@@ -50,9 +86,8 @@ collapse_continuations (line)
     return;
 
   out = in;
-  if (out > line)
-    while (out[-1] == '\\')
-      --out;
+  while (out > line && out[-1] == '\\')
+    --out;
 
   while (*in != '\0')
     {
@@ -126,7 +161,7 @@ remove_comments (line)
 {
   char *comment;
 
-  comment = find_char_unquote (line, '#', 0);
+  comment = find_char_unquote (line, "#", 0);
 
   if (comment != 0)
     /* Cut off the line at the #.  */
@@ -174,73 +209,102 @@ concat (s1, s2, s3)
 /* Print a message on stdout.  */
 
 void
-message (s1, s2, s3, s4, s5, s6)
-     char *s1, *s2, *s3, *s4, *s5, *s6;
+#if __STDC__ && HAVE_STDVARARGS
+message (int prefix, const char *fmt, ...)
+#else
+message (prefix, fmt, va_alist)
+     int prefix;
+     const char *fmt;
+     va_dcl
+#endif
 {
-  if (makelevel == 0)
-    printf ("%s: ", program);
-  else
-    printf ("%s[%u]: ", program, makelevel);
-  printf (s1, s2, s3, s4, s5, s6);
-  putchar ('\n');
+#if HAVE_STDVARARGS
+  va_list args;
+#endif
+
+  log_working_directory (1);
+
+  if (fmt != 0)
+    {
+      if (prefix)
+	{
+	  if (makelevel == 0)
+	    printf ("%s: ", program);
+	  else
+	    printf ("%s[%u]: ", program, makelevel);
+	}
+      VA_START (args, fmt);
+      VA_PRINTF (stdout, fmt, args);
+      VA_END (args);
+      putchar ('\n');
+    }
+
   fflush (stdout);
 }
 
+/* Print an error message.  */
+
+void
+#if __STDC__ && HAVE_STDVARARGS
+error (const struct floc *flocp, const char *fmt, ...)
+#else
+error (flocp, fmt, va_alist)
+     const struct floc *flocp;
+     const char *fmt;
+     va_dcl
+#endif
+{
+#if HAVE_STDVARARGS
+  va_list args;
+#endif
+
+  log_working_directory (1);
+
+  if (flocp && flocp->filenm)
+    fprintf (stderr, "%s:%lu: ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
+    fprintf (stderr, "%s: ", program);
+  else
+    fprintf (stderr, "%s[%u]: ", program, makelevel);
+
+  VA_START(args, fmt);
+  VA_PRINTF (stderr, fmt, args);
+  VA_END (args);
+
+  putc ('\n', stderr);
+  fflush (stderr);
+}
+
 /* Print an error message and exit.  */
 
-/* VARARGS1 */
 void
-fatal (s1, s2, s3, s4, s5, s6)
-     char *s1, *s2, *s3, *s4, *s5, *s6;
+#if __STDC__ && HAVE_STDVARARGS
+fatal (const struct floc *flocp, const char *fmt, ...)
+#else
+fatal (flocp, fmt, va_alist)
+     const struct floc *flocp;
+     const char *fmt;
+     va_dcl
+#endif
 {
-  if (makelevel == 0)
+#if HAVE_STDVARARGS
+  va_list args;
+#endif
+
+  log_working_directory (1);
+
+  if (flocp && flocp->filenm)
+    fprintf (stderr, "%s:%lu: *** ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
     fprintf (stderr, "%s: *** ", program);
   else
     fprintf (stderr, "%s[%u]: *** ", program, makelevel);
-  fprintf (stderr, s1, s2, s3, s4, s5, s6);
-  fputs (".  Stop.\n", stderr);
 
-  die (2);
-}
+  VA_START(args, fmt);
+  VA_PRINTF (stderr, fmt, args);
+  VA_END (args);
 
-/* Print error message.  `s1' is printf control string, `s2' is arg for it. */
-
-/* VARARGS1 */
-
-void
-error (s1, s2, s3, s4, s5, s6)
-     char *s1, *s2, *s3, *s4, *s5, *s6;
-{
-  if (makelevel == 0)
-    fprintf (stderr, "%s: ", program);
-  else
-    fprintf (stderr, "%s[%u]: ", program, makelevel);
-  fprintf (stderr, s1, s2, s3, s4, s5, s6);
-  putc ('\n', stderr);
-  fflush (stderr);
-}
-
-void
-makefile_error (file, lineno, s1, s2, s3, s4, s5, s6)
-     char *file;
-     unsigned int lineno;
-     char *s1, *s2, *s3, *s4, *s5, *s6;
-{
-  fprintf (stderr, "%s:%u: ", file, lineno);
-  fprintf (stderr, s1, s2, s3, s4, s5, s6);
-  putc ('\n', stderr);
-  fflush (stderr);
-}
-
-void
-makefile_fatal (file, lineno, s1, s2, s3, s4, s5, s6)
-     char *file;
-     unsigned int lineno;
-     char *s1, *s2, *s3, *s4, *s5, *s6;
-{
-  fprintf (stderr, "%s:%u: *** ", file, lineno);
-  fprintf (stderr, s1, s2, s3, s4, s5, s6);
-  fputs (".  Stop.\n", stderr);
+  fputs (_(".  Stop.\n"), stderr);
 
   die (2);
 }
@@ -254,13 +318,15 @@ strerror (errnum)
      int errnum;
 {
   extern int errno, sys_nerr;
+#ifndef __DECC
   extern char *sys_errlist[];
+#endif
   static char buf[] = "Unknown error 12345678901234567890";
 
   if (errno < sys_nerr)
     return sys_errlist[errnum];
 
-  sprintf ("Unknown error %d", buf, errnum);
+  sprintf (buf, _("Unknown error %d"), errnum);
   return buf;
 }
 #endif
@@ -271,7 +337,7 @@ void
 perror_with_name (str, name)
      char *str, *name;
 {
-  error ("%s%s: %s", str, name, strerror (errno));
+  error (NILF, "%s%s: %s", str, name, strerror (errno));
 }
 
 /* Print an error message from errno and exit.  */
@@ -280,15 +346,19 @@ void
 pfatal_with_name (name)
      char *name;
 {
-  fatal ("%s: %s", name, strerror (errno));
+  fatal (NILF, "%s: %s", name, strerror (errno));
 
   /* NOTREACHED */
 }
 
 /* Like malloc but get fatal error if memory is exhausted.  */
+/* Don't bother if we're using dmalloc; it provides these for us.  */
+
+#ifndef HAVE_DMALLOC_H
 
 #undef xmalloc
 #undef xrealloc
+#undef xstrdup
 
 char *
 xmalloc (size)
@@ -296,7 +366,7 @@ xmalloc (size)
 {
   char *result = (char *) malloc (size);
   if (result == 0)
-    fatal ("virtual memory exhausted");
+    fatal (NILF, _("virtual memory exhausted"));
   return result;
 }
 
@@ -306,15 +376,43 @@ xrealloc (ptr, size)
      char *ptr;
      unsigned int size;
 {
-  char *result = (char *) realloc (ptr, size);
+  char *result;
+
+  /* Some older implementations of realloc() don't conform to ANSI.  */
+  result = ptr ? realloc (ptr, size) : malloc (size);
   if (result == 0)
-    fatal ("virtual memory exhausted");
+    fatal (NILF, _("virtual memory exhausted"));
   return result;
 }
 
+
+char *
+xstrdup (ptr)
+     const char *ptr;
+{
+  char *result;
+
+#ifdef HAVE_STRDUP
+  result = strdup (ptr);
+#else
+  result = (char *) malloc (strlen (ptr) + 1);
+#endif
+
+  if (result == 0)
+    fatal (NILF, _("virtual memory exhausted"));
+
+#ifdef HAVE_STRDUP
+  return result;
+#else
+  return strcpy(result, ptr);
+#endif
+}
+
+#endif  /* HAVE_DMALLOC_H */
+
 char *
 savestring (str, length)
-     char *str;
+     const char *str;
      unsigned int length;
 {
   register char *out = (char *) xmalloc (length + 1);
@@ -330,21 +428,28 @@ savestring (str, length)
 
 char *
 sindex (big, blen, small, slen)
-     char *big;
+     const char *big;
      unsigned int blen;
-     char *small;
+     const char *small;
      unsigned int slen;
 {
-  register unsigned int b;
-
-  if (blen < 1)
+  if (!blen)
     blen = strlen (big);
-  if (slen < 1)
+  if (!slen)
     slen = strlen (small);
 
-  for (b = 0; b < blen; ++b)
-    if (big[b] == *small && !strncmp (&big[b + 1], small + 1, slen - 1))
-      return (&big[b]);
+  if (slen && blen >= slen)
+    {
+      register unsigned int b;
+
+      /* Quit when there's not enough room left for the small string.  */
+      --slen;
+      blen -= slen;
+
+      for (b = 0; b < blen; ++b, ++big)
+        if (*big == *small && strneq (big + 1, small + 1, slen))
+          return (char *)big;
+    }
 
   return 0;
 }
@@ -357,12 +462,12 @@ sindex (big, blen, small, slen)
 
 char *
 lindex (s, limit, c)
-     register char *s, *limit;
+     register const char *s, *limit;
      int c;
 {
   while (s < limit)
     if (*s++ == c)
-      return s - 1;
+      return (char *)(s - 1);
 
   return 0;
 }
@@ -378,6 +483,37 @@ end_of_token (s)
   return s;
 }
 
+#ifdef WINDOWS32
+/*
+ * Same as end_of_token, but take into account a stop character
+ */
+char *
+end_of_token_w32 (s, stopchar)
+     char *s;
+     char stopchar;
+{
+  register char *p = s;
+  register int backslash = 0;
+
+  while (*p != '\0' && *p != stopchar && (backslash || !isblank (*p)))
+    {
+      if (*p++ == '\\')
+        {
+          backslash = !backslash;
+          while (*p == '\\')
+            {
+              backslash = !backslash;
+              ++p;
+            }
+        }
+      else
+        backslash = 0;
+    }
+
+  return p;
+}
+#endif
+
 /* Return the address of the first nonwhitespace or null in the string S.  */
 
 char *
@@ -420,14 +556,14 @@ copy_dep_chain (d)
 {
   register struct dep *c;
   struct dep *firstnew = 0;
-  struct dep *lastnew;
+  struct dep *lastnew = 0;
 
   while (d != 0)
     {
       c = (struct dep *) xmalloc (sizeof (struct dep));
       bcopy ((char *) d, (char *) c, sizeof (struct dep));
       if (c->name != 0)
-	c->name = savestring (c->name, strlen (c->name));
+	c->name = xstrdup (c->name);
       c->next = 0;
       if (firstnew == 0)
 	firstnew = lastnew = c;
@@ -514,8 +650,9 @@ log_access (flavor)
      but we write this one to stderr because it might be
      run in a child fork whose stdout is piped.  */
 
-  fprintf (stderr, "%s access: user %d (real %d), group %d (real %d)\n",
-	   flavor, geteuid (), getuid (), getegid (), getgid ());
+  fprintf (stderr, _("%s access: user %lu (real %lu), group %lu (real %lu)\n"),
+	   flavor, (unsigned long) geteuid (), (unsigned long) getuid (),
+           (unsigned long) getegid (), (unsigned long) getgid ());
   fflush (stderr);
 }
 
@@ -523,6 +660,7 @@ log_access (flavor)
 static void
 init_access ()
 {
+#ifndef VMS
   user_uid = getuid ();
   user_gid = getgid ();
 
@@ -533,9 +671,10 @@ init_access ()
   if (user_uid == -1 || user_gid == -1 || make_uid == -1 || make_gid == -1)
     pfatal_with_name ("get{e}[gu]id");
 
-  log_access ("Initialized");
+  log_access (_("Initialized"));
 
   current_access = make;
+#endif
 }
 
 #endif	/* GETLOADAVG_PRIVILEGED */
@@ -716,23 +855,3 @@ get_path_max ()
   return value;
 }
 #endif
-
-/* On some systems, stat can return EINTR.  */
-
-int
-safe_stat (name, buf)
-     char *name;
-     struct stat *buf;
-{
-  int ret;
-
-#ifdef EINTR
-  do
-#endif
-    ret = stat (name, buf);
-#ifdef EINTR
-  while (ret < 0 && errno == EINTR);
-#endif
-
-  return  ret;
-}

readme.vms

@@ -0,0 +1,64 @@
+This is the VMS port of GNU Make.
+
+It is based on the VMS port of GNU Make 3.60 by Mike Moretti.
+
+This port was done by Klaus Kämpf <kkaempf@progis.de> of
+proGIS Software, Aachen, Germany.
+
+To build Make, simply type @makefile.  This should compile all the
+necessary files and link Make.  There is also a file called
+makefile.vms.  If you already have GNU Make built you can just use
+Make with this makefile to rebuild.
+
+Here are some notes about GNU Make for VMS:
+
+The variable $^ separates files with commas instead of spaces (It's the
+natural thing to do for VMS).
+
+See defaults.c for VMS default suffixes and my definitions for default
+rules and variables.
+
+The shell function is not implemented yet.
+
+Load average routines haven't been implemented for VMS yet.
+
+The default include directory for including other makefiles is
+SYS$SYSROOT:[SYSLIB] (I don't remember why I didn't just use
+SYS$LIBRARY: instead; maybe it wouldn't work that way).
+
+The default makefiles make looks for are: makefile.vms, gnumakefile, makefile.,
+and gnumakefile. .
+
+The stat() function and handling of time stamps in VMS is broken, so I
+replaced it with a hack in vmsfunctions.c. I will provide a full rewrite
+somewhere in the future. Be warned, the time resolution inside make is
+less than what vms provides. This might be a problem on the faster Alphas.
+
+You can use a : in a filename only if you preceed it with a backslash ('\').
+E.g.- hobbes\:[bogas.files]
+
+Make ignores success, informational, or warning errors (-S-, -I-, or -W-).
+But it will stop on -E- and -F- errors. (unless you do something to override
+this in your makefile, or whatever).
+
+Remote stuff isn't implemented yet.
+
+Multiple line DCL commands, such as "if" statements, must be put inside
+command files.  You can run a command file by using \@.
+
+
+Change history:
+
+3.76.x
+======
+Added VMS help version (make.hlp) of the Unix man page. To integrate
+that with an existing Help library use a command like the following
+ $lib/ins/help sys$help:helplib.hlb make.hlp
+3.74.3
+======
+Lots of default settings are adapted for VMS. See default.c.
+
+Long command lines are now converted to command files.
+
+Comma (',') as a separator is now allowed. See makefile.vms for an example.
+

remote-cstms.c

@@ -18,18 +18,19 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
+#include "job.h"
+#include "filedef.h"
 #include "commands.h"
 #include "job.h"
 #include <sys/time.h>
 #include <netdb.h>
 
-#define __STRICT_BSD__		/* Don't make conflicting declarations.  */
 #include "customs.h"
 
-
 char *remote_description = "Customs";
 
 /* File name of the Customs `export' client command.
@@ -42,25 +43,47 @@ static ExportPermit permit;
 /* Normalized path name of the current directory.  */
 static char *normalized_cwd;
 
+/* Call once at startup even if no commands are run.  */
+
+void
+remote_setup ()
+{
+}
+
+/* Called before exit.  */
+
+void
+remote_cleanup ()
+{
+}
+
 /* Return nonzero if the next job should be done remotely.  */
 
 int
-start_remote_job_p ()
+start_remote_job_p (first_p)
+     int first_p;
 {
   static int inited = 0;
   int status;
-
-  /* Allow the user to turn off job exportation
-     (useful while he is debugging Customs, for example).  */
-  if (getenv ("GNU_MAKE_NO_CUSTOMS") != 0)
-    return 0;
+  int njobs;
 
   if (!inited)
     {
+      /* Allow the user to turn off job exportation (useful while he is
+         debugging Customs, for example).  */
+      if (getenv ("GNU_MAKE_NO_CUSTOMS") != 0)
+        {
+          inited = -1;
+          return 0;
+        }
+
       /* For secure Customs, make is installed setuid root and
 	 Customs requires a privileged source port be used.  */
       make_access ();
 
+      if (debug_flag)
+        Rpc_Debug(1);
+
       /* Ping the daemon once to see if it is there.  */
       inited = Customs_Ping () == RPC_SUCCESS ? 1 : -1;
 
@@ -87,6 +110,15 @@ start_remote_job_p ()
   if (inited < 0)
     return 0;
 
+  njobs = job_slots_used;
+  if (!first_p)
+    njobs -= 1;		/* correction for being called from reap_children() */
+
+  /* the first job should run locally, or, if the -l flag is given, we use
+     that as clue as to how many local jobs should be scheduled locally */
+  if (max_load_average < 0 && njobs == 0 || njobs < max_load_average)
+     return 0;
+
   status = Customs_Host (EXPORT_SAME, &permit);
   if (status != RPC_SUCCESS)
     {
@@ -113,8 +145,8 @@ start_remote_job (argv, envp, stdin_fd, is_remote, id_ptr, used_stdin)
      int *id_ptr;
      int *used_stdin;
 {
-  extern int vfork (), execve ();
   char waybill[MAX_DATA_SIZE], msg[128];
+  struct hostent *host;
   struct timeval timeout;
   struct sockaddr_in sin;
   int len;
@@ -126,7 +158,7 @@ start_remote_job (argv, envp, stdin_fd, is_remote, id_ptr, used_stdin)
   retsock = Rpc_UdpCreate (True, 0);
   if (retsock < 0)
     {
-      error ("exporting: Couldn't create return socket.");
+      error (NILF, "exporting: Couldn't create return socket.");
       return 1;
     }
 
@@ -150,8 +182,8 @@ start_remote_job (argv, envp, stdin_fd, is_remote, id_ptr, used_stdin)
   /* Modify the waybill as if the remote child had done `child_access ()'.  */
   {
     WayBill *wb = (WayBill *) waybill;
-    wb->euid = wb->ruid;
-    wb->rgid = wb->rgid;
+    wb->ruid = wb->euid;
+    wb->rgid = wb->egid;
   }
 
   /* Send the request to the server, timing out in 20 seconds.  */
@@ -164,26 +196,31 @@ start_remote_job (argv, envp, stdin_fd, is_remote, id_ptr, used_stdin)
 		     len, (Rpc_Opaque) waybill,
 		     sizeof(msg), (Rpc_Opaque) msg,
 		     1, &timeout);
+
+  host = gethostbyaddr((char *)&permit.addr, sizeof(permit.addr), AF_INET);
+
   if (status != RPC_SUCCESS)
     {
       (void) close (retsock);
       (void) close (sock);
-      error ("exporting: %s", Rpc_ErrorMessage (status));
+      error (NILF, "exporting to %s: %s",
+             host ? host->h_name : inet_ntoa (permit.addr),
+             Rpc_ErrorMessage (status));
       return 1;
     }
   else if (msg[0] != 'O' || msg[1] != 'k' || msg[2] != '\0')
     {
       (void) close (retsock);
       (void) close (sock);
-      error ("CUSTOMS_IMPORT: %s", msg);
+      error (NILF, "exporting to %s: %s",
+             host ? host->h_name : inet_ntoa (permit.addr),
+             msg);
       return 1;
     }
-  else if (debug_flag)
+  else
     {
-      struct hostent *host = gethostbyaddr (&permit.addr, sizeof (permit.addr),
-					    AF_INET);
-      printf ("Job exported to %s ID %u\n",
-	      host == 0 ? inet_ntoa (permit.addr) : host->h_name,
+      error (NILF, "*** exported to %s (id %u)",
+	      host ? host->h_name : inet_ntoa (permit.addr),
 	      permit.id);
     }
 
@@ -225,6 +262,7 @@ start_remote_job (argv, envp, stdin_fd, is_remote, id_ptr, used_stdin)
   (void) close (sock);
   *is_remote = 0;
   *id_ptr = pid;
+  *used_stdin = 1;
   return 0;
 }
 

remote-stub.c

@@ -1,5 +1,5 @@
 /* Template for the remote job exportation interface to GNU Make.
-Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1988, 1989, 1992, 1993, 1996 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,19 +14,36 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
+#include "filedef.h"
+#include "job.h"
 #include "commands.h"
 
 
 char *remote_description = 0;
 
+/* Call once at startup even if no commands are run.  */
 
+void
+remote_setup ()
+{
+}
+
+/* Called before exit.  */
+
+void
+remote_cleanup ()
+{
+}
+
 /* Return nonzero if the next job should be done remotely.  */
 
 int
-start_remote_job_p ()
+start_remote_job_p (first_p)
+     int first_p;
 {
   return 0;
 }

rule.c

@@ -1,5 +1,5 @@
 /* Pattern and suffix rule internals for GNU Make.
-Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+Copyright (C) 1988,89,90,91,92,93, 1998 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify
@@ -14,16 +14,18 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 #include "make.h"
-#include "commands.h"
 #include "dep.h"
-#include "file.h"
+#include "filedef.h"
+#include "job.h"
+#include "commands.h"
 #include "variable.h"
 #include "rule.h"
 
-static void freerule ();
+static void freerule PARAMS ((struct rule *rule, struct rule *lastrule));
 
 /* Chain of all pattern rules.  */
 
@@ -49,6 +51,14 @@ unsigned int max_pattern_deps;
 
 unsigned int max_pattern_dep_length;
 
+/* Chain of all pattern-specific variables.  */
+
+static struct pattern_var *pattern_vars;
+
+/* Pointer to last struct in the chain, so we can add onto the end.  */
+
+static struct pattern_var *last_pattern_var;
+
 /* Pointer to structure for the file .SUFFIXES
    whose dependencies are the suffixes to be searched.  */
 
@@ -85,7 +95,7 @@ count_implicit_rule_limits ()
       unsigned int ntargets;
 
       ++num_pattern_rules;
-      
+
       ntargets = 0;
       while (rule->targets[ntargets] != 0)
 	++ntargets;
@@ -96,9 +106,13 @@ count_implicit_rule_limits ()
       for (dep = rule->deps; dep != 0; dep = dep->next)
 	{
 	  unsigned int len = strlen (dep->name);
-	  char *p = rindex (dep->name, '/');
-	  char *p2 = p != 0 ? index (dep->name, '%') : 0;
 
+#ifdef VMS
+	  char *p = rindex (dep->name, ']');
+#else
+	  char *p = rindex (dep->name, '/');
+#endif
+	  char *p2 = p != 0 ? index (dep->name, '%') : 0;
 	  ndeps++;
 
 	  if (len > max_pattern_dep_length)
@@ -125,7 +139,11 @@ count_implicit_rule_limits ()
 		 nonexistent subdirectory.  */
 
 	      dep->changed = !dir_file_exists_p (name, "");
+#ifdef VMS
+	      if (dep->changed && *name == ']')
+#else
 	      if (dep->changed && *name == '/')
+#endif
 		{
 		  /* The name is absolute and the directory does not exist.
 		     This rule can never possibly match, since this dependency
@@ -148,7 +166,7 @@ count_implicit_rule_limits ()
     end_main_loop:
       rule = next;
     }
-  
+
   if (name != 0)
     free (name);
 }
@@ -173,7 +191,11 @@ convert_suffix_rule (target, source, cmds)
     /* Special case: TARGET being nil means we are defining a
        `.X.a' suffix rule; the target pattern is always `(%.o)'.  */
     {
+#ifdef VMS
+      targname = savestring ("(%.obj)", 7);
+#else
       targname = savestring ("(%.o)", 5);
+#endif
       targpercent = targname + 1;
     }
   else
@@ -312,27 +334,29 @@ new_pattern_rule (rule, override)
 	      if (!streq (dep_name (d), dep_name (d2)))
 		break;
 	    if (d == 0 && d2 == 0)
-	      /* All the dependencies matched.  */
-	      if (override)
-		{
-		  /* Remove the old rule.  */
-		  freerule (r, lastrule);
-		  /* Install the new one.  */
-		  if (pattern_rules == 0)
-		    pattern_rules = rule;
-		  else
-		    last_pattern_rule->next = rule;
-		  last_pattern_rule = rule;
-		  
-		  /* We got one.  Stop looking.  */
-		  goto matched;
-		}
-	      else
-		{
-		  /* The old rule stays intact.  Destroy the new one.  */
-		  freerule (rule, (struct rule *) 0);
-		  return 0;
-		}
+	      {
+		/* All the dependencies matched.  */
+		if (override)
+		  {
+		    /* Remove the old rule.  */
+		    freerule (r, lastrule);
+		    /* Install the new one.  */
+		    if (pattern_rules == 0)
+		      pattern_rules = rule;
+		    else
+		      last_pattern_rule->next = rule;
+		    last_pattern_rule = rule;
+
+		    /* We got one.  Stop looking.  */
+		    goto matched;
+		  }
+		else
+		  {
+		    /* The old rule stays intact.  Destroy the new one.  */
+		    freerule (rule, (struct rule *) 0);
+		    return 0;
+		  }
+	      }
 	  }
       }
 
@@ -395,11 +419,11 @@ install_pattern_rule (p, terminal)
     {
       r->terminal = terminal;
       r->cmds = (struct commands *) xmalloc (sizeof (struct commands));
-      r->cmds->filename = 0;
-      r->cmds->lineno = 0;
+      r->cmds->fileinfo.filenm = 0;
+      r->cmds->fileinfo.lineno = 0;
       /* These will all be string literals, but we malloc space for them
 	 anyway because somebody might want to free them later.  */
-      r->cmds->commands = savestring (p->commands, strlen (p->commands));
+      r->cmds->commands = xstrdup (p->commands);
       r->cmds->command_lines = 0;
     }
 }
@@ -415,10 +439,23 @@ freerule (rule, lastrule)
 {
   struct rule *next = rule->next;
   register unsigned int i;
+  register struct dep *dep;
 
   for (i = 0; rule->targets[i] != 0; ++i)
     free (rule->targets[i]);
 
+  dep = rule->deps;
+  while (dep)
+    {
+      struct dep *t;
+
+      t = dep->next;
+      /* We might leak dep->name here, but I'm not sure how to fix this: I
+         think that pointer might be shared (e.g., in the file hash?)  */
+      free ((char *) dep);
+      dep = t;
+    }
+
   free ((char *) rule->targets);
   free ((char *) rule->suffixes);
   free ((char *) rule->lens);
@@ -506,6 +543,78 @@ create_pattern_rule (targets, target_percents,
     r->terminal = terminal;
 }
 
+/* Create a new pattern-specific variable struct.  */
+
+struct pattern_var *
+create_pattern_var (target, suffix)
+     char *target, *suffix;
+{
+  register struct pattern_var *p = 0;
+  unsigned int len = strlen(target);
+
+  /* Look to see if this pattern already exists in the list.  */
+  for (p = pattern_vars; p != NULL; p = p->next)
+    if (p->len == len && !strcmp(p->target, target))
+      break;
+
+  if (p == 0)
+    {
+      p = (struct pattern_var *) xmalloc (sizeof (struct pattern_var));
+      if (last_pattern_var != 0)
+        last_pattern_var->next = p;
+      else
+        pattern_vars = p;
+      last_pattern_var = p;
+      p->next = 0;
+      p->target = target;
+      p->len = len;
+      p->suffix = suffix + 1;
+      p->vars = create_new_variable_set();
+    }
+
+  return p;
+}
+
+/* Look up a target in the pattern-specific variable list.  */
+
+struct pattern_var *
+lookup_pattern_var (target)
+     char *target;
+{
+  struct pattern_var *p;
+  unsigned int targlen = strlen(target);
+
+  for (p = pattern_vars; p != 0; p = p->next)
+    {
+      char *stem;
+      unsigned int stemlen;
+
+      if (p->len > targlen)
+        /* It can't possibly match.  */
+        continue;
+
+      /* From the lengths of the filename and the pattern parts,
+         find the stem: the part of the filename that matches the %.  */
+      stem = target + (p->suffix - p->target - 1);
+      stemlen = targlen - p->len + 1;
+
+      /* Compare the text in the pattern before the stem, if any.  */
+      if (stem > target && !strneq (p->target, target, stem - target))
+        continue;
+
+      /* Compare the text in the pattern after the stem, if any.
+         We could test simply use streq, but this way we compare the
+         first two characters immediately.  This saves time in the very
+         common case where the first character matches because it is a
+         period.  */
+      if (*p->suffix == stem[stemlen]
+          && (*p->suffix == '\0'|| streq (&p->suffix[1], &stem[stemlen+1])))
+        break;
+    }
+
+  return p;
+}
+
 /* Print the data base of rules.  */
 
 static void			/* Useful to call from gdb.  */
@@ -555,17 +664,49 @@ print_rule_data_base ()
     }
 
   if (rules == 0)
-    puts ("\n# No implicit rules.");
+    puts (_("\n# No implicit rules."));
   else
     {
-      printf ("\n# %u implicit rules, %u", rules, terminal);
+      printf (_("\n# %u implicit rules, %u"), rules, terminal);
 #ifndef	NO_FLOAT
       printf (" (%.1f%%)", (double) terminal / (double) rules * 100.0);
+#else
+      {
+	int f = (terminal * 1000 + 5) / rules;
+	printf (" (%d.%d%%)", f/10, f%10);
+      }
 #endif
-      puts (" terminal.");
+      puts (_(" terminal."));
     }
 
   if (num_pattern_rules != rules)
-    fatal ("BUG: num_pattern_rules wrong!  %u != %u",
-	   num_pattern_rules, rules);
+    {
+      /* This can happen if a fatal error was detected while reading the
+         makefiles and thus count_implicit_rule_limits wasn't called yet.  */
+      if (num_pattern_rules != 0)
+        fatal (NILF, _("BUG: num_pattern_rules wrong!  %u != %u"),
+               num_pattern_rules, rules);
+    }
+
+  puts (_("\n# Pattern-specific variable values"));
+
+  {
+    struct pattern_var *p;
+
+    rules = 0;
+    for (p = pattern_vars; p != 0; p = p->next)
+      {
+        ++rules;
+
+        printf ("\n%s :\n", p->target);
+        print_variable_set (p->vars->set, "# ");
+      }
+
+    if (rules == 0)
+      puts (_("\n# No pattern-specific variable values."));
+    else
+      {
+        printf (_("\n# %u pattern-specific variable values"), rules);
+      }
+  }
 }

rule.h

@@ -14,7 +14,8 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
 
 /* Structure used for pattern rules.  */
 
@@ -30,6 +31,15 @@ struct rule
     char in_use;		/* If in use by a parent pattern_search.  */
   };
 
+struct pattern_var
+  {
+    struct pattern_var *next;
+    char *target;
+    unsigned int len;
+    char *suffix;
+    struct variable_set_list *vars;
+  };
+
 /* For calling install_pattern_rule.  */
 struct pspec
   {
@@ -49,5 +59,14 @@ extern struct file *suffix_file;
 extern unsigned int maxsuffix;
 
 
-extern void install_pattern_rule ();
-int new_pattern_rule ();
+extern void install_pattern_rule PARAMS ((struct pspec *p, int terminal));
+extern int new_pattern_rule PARAMS ((struct rule *rule, int override));
+extern struct pattern_var *create_pattern_var PARAMS ((char *target, char *suffix));
+extern struct pattern_var *lookup_pattern_var PARAMS ((char *target));
+extern void count_implicit_rule_limits PARAMS ((void));
+extern void convert_to_pattern PARAMS ((void));
+extern void create_pattern_rule PARAMS ((char **targets,
+                                         char **target_percents, int terminal,
+                                         struct dep *deps,
+                                         struct commands *commands,
+                                         int override));

signame.c

@@ -1,28 +1,40 @@
 /* Convert between signal names and numbers.
-   Copyright (C) 1990, 1992, 1993 Free Software Foundation, Inc.
+   Copyright (C) 1990, 1992, 1993, 1995, 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include "make.h"
 
 #include <stdio.h>
 #include <sys/types.h>		/* Some systems need this for <signal.h>.  */
 #include <signal.h>
 
-#ifdef HAVE_CONFIG_H
-#include <config.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
 #endif
 
+/* Some systems declare `sys_siglist in <unistd.h>; if
+   configure defined SYS_SIGLIST_DECLARED, it may expect
+   to find the declaration there.  */
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+
 /* Some systems do not define NSIG in <signal.h>.  */
 #ifndef	NSIG
 #ifdef	_NSIG
@@ -42,7 +54,7 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 /* There is too much variation in Sys V signal numbers and names, so
    we must initialize them at runtime.  */
 
-static const char undoc[] = "unknown signal";
+static const char *undoc;
 
 const char *sys_siglist[NSIG];
 
@@ -56,12 +68,14 @@ extern char *sys_siglist[];
 
 /* Table of abbreviations for signals.  Note:  A given number can
    appear more than once with different abbreviations.  */
+#define SIG_TABLE_SIZE  (NSIG*2)
+
 typedef struct
   {
     int number;
     const char *abbrev;
   } num_abbrev;
-static num_abbrev sig_table[NSIG*2];
+static num_abbrev sig_table[SIG_TABLE_SIZE];
 /* Number of elements of sig_table used.  */
 static int sig_table_nelts = 0;
 
@@ -74,10 +88,18 @@ init_sig (number, abbrev, name)
      const char *name;
 {
 #ifndef HAVE_SYS_SIGLIST
-  sys_siglist[number] = name;
+  /* If this value is ever greater than NSIG it seems like it'd be a bug in
+     the system headers, but... better safe than sorry.  We know, for
+     example, that this isn't always true on VMS.  */
+
+  if (number >= 0 && number < NSIG)
+    sys_siglist[number] = name;
 #endif
-  sig_table[sig_table_nelts].number = number;
-  sig_table[sig_table_nelts++].abbrev = abbrev;
+  if (sig_table_nelts < SIG_TABLE_SIZE)
+    {
+      sig_table[sig_table_nelts].number = number;
+      sig_table[sig_table_nelts++].abbrev = abbrev;
+    }
 }
 
 void
@@ -85,6 +107,10 @@ signame_init ()
 {
 #ifndef HAVE_SYS_SIGLIST
   int i;
+  char *u = _("unknown signal");
+
+  undoc = xstrdup(u);
+
   /* Initialize signal names.  */
   for (i = 0; i < NSIG; i++)
     sys_siglist[i] = undoc;
@@ -92,129 +118,135 @@ signame_init ()
 
   /* Initialize signal names.  */
 #if defined (SIGHUP)
-  init_sig (SIGHUP, "HUP", "Hangup");
+  init_sig (SIGHUP, "HUP", _("Hangup"));
 #endif
 #if defined (SIGINT)
-  init_sig (SIGINT, "INT", "Interrupt");
+  init_sig (SIGINT, "INT", _("Interrupt"));
 #endif
 #if defined (SIGQUIT)
-  init_sig (SIGQUIT, "QUIT", "Quit");
+  init_sig (SIGQUIT, "QUIT", _("Quit"));
 #endif
 #if defined (SIGILL)
-  init_sig (SIGILL, "ILL", "Illegal Instruction");
+  init_sig (SIGILL, "ILL", _("Illegal Instruction"));
 #endif
 #if defined (SIGTRAP)
-  init_sig (SIGTRAP, "TRAP", "Trace/breakpoint trap");
+  init_sig (SIGTRAP, "TRAP", _("Trace/breakpoint trap"));
 #endif
   /* If SIGIOT == SIGABRT, we want to print it as SIGABRT because
      SIGABRT is in ANSI and POSIX.1 and SIGIOT isn't.  */
 #if defined (SIGABRT)
-  init_sig (SIGABRT, "ABRT", "Aborted");
+  init_sig (SIGABRT, "ABRT", _("Aborted"));
 #endif
 #if defined (SIGIOT)
-  init_sig (SIGIOT, "IOT", "IOT trap");
+  init_sig (SIGIOT, "IOT", _("IOT trap"));
 #endif
 #if defined (SIGEMT)
-  init_sig (SIGEMT, "EMT", "EMT trap");
+  init_sig (SIGEMT, "EMT", _("EMT trap"));
 #endif
 #if defined (SIGFPE)
-  init_sig (SIGFPE, "FPE", "Floating point exception");
+  init_sig (SIGFPE, "FPE", _("Floating point exception"));
 #endif
 #if defined (SIGKILL)
-  init_sig (SIGKILL, "KILL", "Killed");
+  init_sig (SIGKILL, "KILL", _("Killed"));
 #endif
 #if defined (SIGBUS)
-  init_sig (SIGBUS, "BUS", "Bus error");
+  init_sig (SIGBUS, "BUS", _("Bus error"));
 #endif
 #if defined (SIGSEGV)
-  init_sig (SIGSEGV, "SEGV", "Segmentation fault");
+  init_sig (SIGSEGV, "SEGV", _("Segmentation fault"));
 #endif
 #if defined (SIGSYS)
-  init_sig (SIGSYS, "SYS", "Bad system call");
+  init_sig (SIGSYS, "SYS", _("Bad system call"));
 #endif
 #if defined (SIGPIPE)
-  init_sig (SIGPIPE, "PIPE", "Broken pipe");
+  init_sig (SIGPIPE, "PIPE", _("Broken pipe"));
 #endif
 #if defined (SIGALRM)
-  init_sig (SIGALRM, "ALRM", "Alarm clock");
+  init_sig (SIGALRM, "ALRM", _("Alarm clock"));
 #endif
 #if defined (SIGTERM)
-  init_sig (SIGTERM, "TERM", "Terminated");
+  init_sig (SIGTERM, "TERM", _("Terminated"));
 #endif
 #if defined (SIGUSR1)
-  init_sig (SIGUSR1, "USR1", "User defined signal 1");
+  init_sig (SIGUSR1, "USR1", _("User defined signal 1"));
 #endif
 #if defined (SIGUSR2)
-  init_sig (SIGUSR2, "USR2", "User defined signal 2");
+  init_sig (SIGUSR2, "USR2", _("User defined signal 2"));
 #endif
   /* If SIGCLD == SIGCHLD, we want to print it as SIGCHLD because that
      is what is in POSIX.1.  */
 #if defined (SIGCHLD)
-  init_sig (SIGCHLD, "CHLD", "Child exited");
+  init_sig (SIGCHLD, "CHLD", _("Child exited"));
 #endif
 #if defined (SIGCLD)
-  init_sig (SIGCLD, "CLD", "Child exited");
+  init_sig (SIGCLD, "CLD", _("Child exited"));
 #endif
 #if defined (SIGPWR)
-  init_sig (SIGPWR, "PWR", "Power failure");
+  init_sig (SIGPWR, "PWR", _("Power failure"));
 #endif
 #if defined (SIGTSTP)
-  init_sig (SIGTSTP, "TSTP", "Stopped");
+  init_sig (SIGTSTP, "TSTP", _("Stopped"));
 #endif
 #if defined (SIGTTIN)
-  init_sig (SIGTTIN, "TTIN", "Stopped (tty input)");
+  init_sig (SIGTTIN, "TTIN", _("Stopped (tty input)"));
 #endif
 #if defined (SIGTTOU)
-  init_sig (SIGTTOU, "TTOU", "Stopped (tty output)");
+  init_sig (SIGTTOU, "TTOU", _("Stopped (tty output)"));
 #endif
 #if defined (SIGSTOP)
-  init_sig (SIGSTOP, "STOP", "Stopped (signal)");
+  init_sig (SIGSTOP, "STOP", _("Stopped (signal)"));
 #endif
 #if defined (SIGXCPU)
-  init_sig (SIGXCPU, "XCPU", "CPU time limit exceeded");
+  init_sig (SIGXCPU, "XCPU", _("CPU time limit exceeded"));
 #endif
 #if defined (SIGXFSZ)
-  init_sig (SIGXFSZ, "XFSZ", "File size limit exceeded");
+  init_sig (SIGXFSZ, "XFSZ", _("File size limit exceeded"));
 #endif
 #if defined (SIGVTALRM)
-  init_sig (SIGVTALRM, "VTALRM", "Virtual timer expired");
+  init_sig (SIGVTALRM, "VTALRM", _("Virtual timer expired"));
 #endif
 #if defined (SIGPROF)
-  init_sig (SIGPROF, "PROF", "Profiling timer expired");
+  init_sig (SIGPROF, "PROF", _("Profiling timer expired"));
 #endif
 #if defined (SIGWINCH)
   /* "Window size changed" might be more accurate, but even if that
      is all that it means now, perhaps in the future it will be
      extended to cover other kinds of window changes.  */
-  init_sig (SIGWINCH, "WINCH", "Window changed");
+  init_sig (SIGWINCH, "WINCH", _("Window changed"));
 #endif
 #if defined (SIGCONT)
-  init_sig (SIGCONT, "CONT", "Continued");
+  init_sig (SIGCONT, "CONT", _("Continued"));
 #endif
 #if defined (SIGURG)
-  init_sig (SIGURG, "URG", "Urgent I/O condition");
+  init_sig (SIGURG, "URG", _("Urgent I/O condition"));
 #endif
 #if defined (SIGIO)
   /* "I/O pending" has also been suggested.  A disadvantage is
      that signal only happens when the process has
      asked for it, not everytime I/O is pending.  Another disadvantage
      is the confusion from giving it a different name than under Unix.  */
-  init_sig (SIGIO, "IO", "I/O possible");
+  init_sig (SIGIO, "IO", _("I/O possible"));
 #endif
 #if defined (SIGWIND)
-  init_sig (SIGWIND, "WIND", "SIGWIND");
+  init_sig (SIGWIND, "WIND", _("SIGWIND"));
 #endif
 #if defined (SIGPHONE)
-  init_sig (SIGPHONE, "PHONE", "SIGPHONE");
+  init_sig (SIGPHONE, "PHONE", _("SIGPHONE"));
 #endif
 #if defined (SIGPOLL)
-  init_sig (SIGPOLL, "POLL", "I/O possible");
+  init_sig (SIGPOLL, "POLL", _("I/O possible"));
 #endif
 #if defined (SIGLOST)
-  init_sig (SIGLOST, "LOST", "Resource lost");
+  init_sig (SIGLOST, "LOST", _("Resource lost"));
 #endif
 #if defined (SIGDANGER)
-  init_sig (SIGDANGER, "DANGER", "Danger signal");
+  init_sig (SIGDANGER, "DANGER", _("Danger signal"));
+#endif
+#if defined (SIGINFO)
+  init_sig (SIGINFO, "INFO", _("Information request"));
+#endif
+#if defined (SIGNOFP)
+  init_sig (SIGNOFP, "NOFP", _("Floating point co-processor not available"));
 #endif
 }
 
@@ -228,7 +260,7 @@ sig_abbrev (number)
 
   if (sig_table_nelts == 0)
     signame_init ();
-  
+
   for (i = 0; i < sig_table_nelts; i++)
     if (sig_table[i].number == number)
       return (char *)sig_table[i].abbrev;
@@ -273,3 +305,20 @@ psignal (signal, message)
     fprintf (stderr, "%s: %s\n", message, sys_siglist[signal]);
 }
 #endif
+
+#ifndef HAVE_STRSIGNAL
+/* Return the string associated with the signal number.  */
+
+char *
+strsignal (signal)
+     int signal;
+{
+  static char buf[] = "Signal 12345678901234567890";
+
+  if (signal > 0 || signal < NSIG)
+    return (char *) sys_siglist[signal];
+
+  sprintf (buf, "Signal %d", signal);
+  return buf;
+}
+#endif

signame.h

@@ -1,19 +1,21 @@
 /* Convert between signal names and numbers.
-   Copyright (C) 1990, 1992, 1993 Free Software Foundation, Inc.
+   Copyright (C) 1990, 1992, 1993, 1995, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #if defined (__STDC__) && __STDC__
 
@@ -29,7 +31,7 @@ char *sig_abbrev (int number);
    signal by that name.  */
 int sig_number (const char *abbrev);
 
-/* Avoid conflicts with a system header file that might define these two.  */
+/* Avoid conflicts with a system header file that might define these three.  */
 
 #ifndef HAVE_PSIGNAL
 /* Print to standard error the name of SIGNAL, preceded by MESSAGE and
@@ -37,6 +39,11 @@ int sig_number (const char *abbrev);
 void psignal (int signal, const char *message);
 #endif
 
+#ifndef HAVE_STRSIGNAL
+/* Return the name of SIGNAL.  */
+char *strsignal (int signal);
+#endif
+
 #if !defined (HAVE_SYS_SIGLIST)
 /* Names for signals from 0 to NSIG-1.  */
 extern const char *sys_siglist[];
@@ -50,6 +57,9 @@ int sig_number ();
 #if !defined (HAVE_SYS_SIGLIST) && !defined (HAVE_PSIGNAL)
 void psignal ();
 #endif
+#ifndef HAVE_STRSIGNAL
+char *strsignal ();
+#endif
 #if !defined (HAVE_SYS_SIGLIST)
 extern char *sys_siglist[];
 #endif

subproc.bat

@@ -0,0 +1,6 @@
+cd w32\subproc
+set MAKE=%2
+set MAKEFILE=%1
+if x%2 == x set MAKE=nmake
+%MAKE% /f %MAKEFILE%
+cd ..\..

tests/COPYING

@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          675 Mass Ave, Cambridge, MA 02139, USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	Appendix: How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

tests/ChangeLog

@@ -0,0 +1,73 @@
+1999-09-23  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/parallelism: Add a check to ensure that the
+	jobserver works when we re-invoke.  Also cleaned up the tests a
+	little, reducing the number of rules we use so the test won't need
+	as many "sleep" commands.
+
+1999-09-16  Paul D. Smith  <psmith@gnu.org>
+
+	* scripts/features/reinvoke: Remove invocations of "touch" in
+	makefiles.  See the comments on the touch function rewrite below.
+	Note that UNIX touch behaves the same way if the file already
+	exists: it sets the time to the _local_ time.  We don't want
+	this.  This is probably a good tip for makefile writers in
+	general, actually... where practical.
+	* scripts/options/dash-l: Ditto.
+	* scripts/options/dash-n: Ditto.
+
+	* test_driver.pl (run_each_test): In retrospect, I don't like the
+	.lN/.bN/.dN postfix required by DOS.  So, for non-DOS systems I
+	changed it back to use .log, .base, and .diff.
+
+	* run_make_tests.pl (set_more_defaults): Move the check for the
+	make pathname to here from set_defaults (that's too early since it
+	happens before the command line processing).
+	Create a new variable $port_type, calculated from $osname, to
+	specify what kind of system we're running on.  We should integrate
+	the VOS stuff here, too.
+	(valid_option): Comment out the workdir/-work stuff so people
+	won't be fooled into thinking it works... someone needs to fix
+	this, though!
+
+	* scripts/functions/origin: Use $port_type instead of $osname.
+	* scripts/functions/foreach: Ditto.
+	* scripts/features/default_names: Ditto.
+
+1999-09-15  Paul D. Smith  <psmith@gnu.org>
+
+	* test_driver.pl (touch): Rewrite this function.  Previously it
+	used to use utime() to hard-set the time based on the current
+	local clock, or, if the file didn't exist, it merely created it.
+	This mirrors exactly what real UNIX touch does, but it fails badly
+	on networked filesystems where the FS server clock is skewed from
+	the local clock: normally modifying a file causes it to get a mod
+	time based on the _server's_ clock.  Hard-setting it based on the
+	_local_ clock causes gratuitous errors and makes the tests
+	unreliable except on local filesystems.  The new function will
+	simply modify the file, allowing the filesystem to set the mod
+	time as it sees fit.
+
+	* scripts/features/parallelism: The second test output could
+	change depending on how fast some scripts completed; use "sleep"
+	to force the order we want.
+
+	* test_driver.pl (toplevel): A bug in Perl 5.000 to Perl 5.004
+	means that "%ENV = ();" doesn't do the right thing.  This worked
+	in Perl 4 and was fixed in Perl 5.004_01, but use a loop to delete
+	the environment rather than require specific versions.
+
+	* run_make_tests.pl (set_more_defaults): Don't use Perl 5 s///
+	modifier "s", so the tests will run with Perl 4.
+	(set_more_defaults): Set $pure_log to empty if there's no -logfile
+	option in PURIFYOPTIONS.
+	(setup_for_test): Don't remove any logs unless $pure_log is set.
+
+1999-09-15  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* scripts/features/reinvoke: Put the SHELL definition in the right
+	test makefile.
+
+1999-09-15  Paul D. Smith  <psmith@gnu.org>
+
+	ChangeLog file for the test suite created.

tests/NEWS

@@ -0,0 +1,161 @@
+Changes from 0.4.9 to 3.78 (Sep 6, 1999):
+
+    Lots of new tests.  Renamed to follow the GNU make scheme.  Also
+    added some support for using Purify with make.
+
+    Rob Tulloh contributed some changes to get the test suite running on
+    NT; I tweaked them a bit (hopefully I didn't break anything!)  Note
+    that NT doesn't grok the self-exec funkiness that Unix shells use,
+    so instead I broke that out into a separate shell script
+    "run_make_tests" that invokes perl with the (renamed) script
+    run_make_tests.pl.
+
+    Eli Zaretski contributed changes to get the test suite running on
+    DOS with DJGPP.  I also meddled in these somewhat.
+
+    If you're on DOS or NT you should run "perl.exe run_make_tests.pl ..."
+    If you're on Unix, you can continue to run "./run_make_tests ..." as
+    before.
+
+Changes from 0.4.8 to 0.4.9 (May 14, 1998):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Add some perl to test_driver.pl to strip out GNU make clock skew
+    warning messages from the output before comparing it to the
+    known-good output.
+
+    A new test for escaped :'s in filenames (someone on VMS found this
+    didn't work anymore in 3.77): scripts/features/escape.
+
+Changes from 0.4.7 to 0.4.8 (May 14, 1998):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    New tests for features to be included in GNU make 3.77.
+
+Changes from 0.4.6 to 0.4.7 (August 18, 1997):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Reworked some tests to make sure they all work with both perl4 and perl5.
+
+    Work around a bug in perl 5.004 which doesn't clean the environment
+    correctly in all cases (fixed in at least 5.004_02).
+
+    Updated functions/strip to test for newline stripping.
+
+    Keep a $PURIFYOPTIONS env variable if present.
+
+Changes from 0.4.5 to 0.4.6 (April 07, 1997):
+
+    Release by Paul D. Smith <psmith@baynetworks.com>; I'm the one to
+    blame for problems in this version :).
+
+    Updated to work with GNU make 3.76 (and pretests).
+
+    Added new tests and updated existing ones.  Note that the new tests
+    weren't tested with perl 4, however I think they should work.
+
+    Ignore any tests whose filenames end in "~", so that Emacs backup
+    files aren't run.
+
+Changes from 0.4.4 to 0.4.5 (April 29, 1995):
+
+    Updated to be compatible with perl 5.001 as well as 4.036.
+
+    Note: the test suite still won't work on 14-char filesystems
+    (sorry, Kaveh), but I will get to it.
+
+    Also, some tests and stuff still haven't made it in because I
+    haven't had time to write the test scripts for them.  But they,
+    too, will get in eventually.  Contributions of scripts (ie, tests
+    that I can just drop in) are particularly welcome and will be
+    incorporated immediately.
+
+Changes from 0.4.3 to 0.4.4 (March 1995):
+
+    Updated for changes in make 3.72.12, and to ignore CVS directories
+    (thanks go to Jim Meyering for the patches for this).
+
+    Fixed uname call to not make a mess on BSD/OS 2.0 (whose uname -a
+    is very verbose).  Let me know if this doesn't work correctly on
+    your system.
+
+    Changed to display test name while it is running, not just when it
+    finishes.
+
+    Note: the test suite still won't work on 14-char filesystems
+    (sorry, Kaveh), but I will get to it.
+
+    Also, some tests and stuff still haven't made it in because I
+    haven't had time to write the test scripts for them.  But they,
+    too, will get in eventually.
+
+Changes from 0.4 to 0.4.3 (October 1994):
+
+    Fixed bugs (like dependencies on environment variables).
+
+    Caught up with changes in make.
+
+    The load_limit test should now silently ignore a failure due to
+    make not being able to read /dev/kmem.
+
+    Reorganized tests into subdirs and renamed lots of things so that
+    those poor souls who still have to deal with 14-char filename
+    limits won't hate me any more.  Thanks very much to Kaveh R. Ghazi
+    <ghazi@noc.rutgers.edu> for helping me with the implementation and
+    testing of these changes, and for putting up with all my whining
+    about it...
+
+    Added a $| = 1 so that systems that don't seem to automatically
+    flush their output for some reason will still print all the
+    output.  I'd hate for someone to miss out on the smiley that
+    you're supposed to get when all the tests pass... :-)
+
+Changes from 0.3 to 0.4 (August 1993):
+
+    Lost in the mists of time (and my hurry to get it out before I
+    left my job).
+
+Changes from 0.2 to 0.3 (9-30-92):
+
+    Several tests fixed to match the fact that MAKELEVEL > 0 or -C now
+    imply -w.
+
+    parallel_execution test fixed to not use double colon rules any
+    more since their behavior has changed.
+
+    errors_in_commands test fixed to handle different error messages
+    and return codes from rm.
+
+    Several tests fixed to handle -make_path with a relative path
+    and/or a name other than "make" for make.
+
+    dash-e-option test fixed to use $PATH instead of $USER (since the
+    latter does not exist on some System V systems).  This also
+    removes the dependency on getlogin (which fails under certain
+    weird conditions).
+
+    test_driver_core changed so that you can give a test name like
+    scripts/errors_in_commands and it will be handled correctly (handy
+    if you have a shell with filename completion).
+
+Changes from 0.1 to 0.2 (5-4-92):
+
+    README corrected to require perl 4.019, not 4.010.
+
+    -make_path replaces -old.
+
+    errors_in_commands test updated for change in format introduced in
+    make 3.62.6.
+
+    test_driver_core now uses a better way of figuring what OS it is
+    running on (thanks to meyering@cs.utexas.edu (Jim Meyering) for
+    suggesting this, as well as discovering the hard way that the old
+    way (testing for /mnt) fails on his machine).
+
+    Some new tests were added.

tests/README

@@ -0,0 +1,79 @@
+This is release 3.78 (September 6, 1999) of the GNU make test
+suite.  See the file NEWS for some of the changes since the last
+release.
+
+This release is made by psmith@gnu.org to correspond to GNU make 3.78.
+It won't work correctly for versions before that.  In addition to some
+infrastructure changes I've added a number of new tests.
+
+Rob Tulloh has contributed changes to get the suite running on NT.
+
+Eli Zaretskii and Esa A E Peuha <peuha@cc.helsinki.fi> have contributed
+changes to get the suite running on DJGPP/DOS.
+
+This package has a number of problems which preclude me from
+distributing it with make as a default "make check" test suite.  The
+most serious of these is that it's not parallelizable: it scribbles all
+over its installation directory and so can only test one make at a
+time.  I simply don't have time to do more with this than I am so far;
+I'm very actively interested in finding someone willing to overhaul the
+test suite infrastructure.  If you're interested, contact me (see below)!
+
+The test suite thus far has been written by Steve McGee, Chris Arthur,
+and Paul D. Smith.  It is covered by the GNU General Public License
+(Version 2), described in the file COPYING.
+
+The test suite requires Perl and is known to work with Perl 4.036 and
+Perl 5.004 (available from ftp.gnu.org, and portable to many machines).
+Earlier or later versions may work; I don't know.  It assumes that the
+first "diff" it finds is GNU diff, but that only matters if a test
+fails.
+
+To run the test suite on a UNIX system, use "perl ./run_make_tests"
+(or just "./run_make_tests" if you have a perl on your PATH).
+
+To run the test suite on Windows NT or DOS systems, use
+"perl.exe ./run_make-tests.pl".
+
+By default, the test engine picks up the first executable called "make"
+that it finds in your path.  You may use the -make_path option (ie,
+"perl run_make_tests -make_path /usr/local/src/make-3.78/make") if
+you want to run a particular copy.  This now works correctly with
+relative paths and when make is called something other than "make" (like
+"gmake").
+
+Tests cannot end with a "~" character, as the test suite will ignore any
+that do (I was tired of having it run my Emacs backup files as test :)
+
+If you want to run the tests in parallel, you should use the mkshadow
+script included here to create temporary "copies" (via symbolic links)
+of the test suite, one for each parallel job.  This is a pain and one
+day maybe the test suite will be rewritten so it's no longer
+necessary--volunteers welcome!
+
+Also, sometimes the tests may behave strangely on networked
+filesystems.  You can use mkshadow to create a copy of the test suite in
+/tmp or similar, and try again.  If the error disappears, it's an issue
+with your network or file server, not GNU make (I believe).
+
+The options/dash-l test will not really test anything if the copy of
+make you are using can't obtain the system load.  Some systems require
+make to be setgid sys or kmem for this; if you don't want to install
+make just to test it, make it setgid to kmem or whatever group /dev/kmem
+is (ie, "chgrp kmem make;chmod g+s make" as root).  In any case, the
+options/dash-l test should no longer *fail* because make can't read
+/dev/kmem.
+
+A directory named "work" will be created when the tests are run which
+will contain any makefiles and "diff" files of tests that fail so that
+you may look at them afterward to see the output of make and the
+expected result.
+
+There is a -help option which will give you more information about the
+other possible options for the test suite.
+
+Any complaints/suggestions/bugs/etc. for the test suite itself (as
+opposed to problems in make that the suite finds) should be sent to
+psmith@gnu.org.  Enjoy!
+                                                Paul D. Smith
+						Chris Arthur

tests/mkshadow

@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# Simple script to make a "shadow" test directory, using symbolic links.
+# Typically you'd put the shadow in /tmp or another local disk
+#
+
+case "$1" in
+  "") echo 'Usage: mkshadow <destdir>'; exit 1 ;;
+esac
+
+dest="$1"
+
+if [ ! -d "$dest" ]; then
+  echo "Destination directory \`$dest' must exist!"
+  exit 1
+fi
+
+if [ ! -f run_make_tests ]; then
+  echo "The current directory doesn't appear to contain the test suite!"
+  exit 1
+fi
+
+suite=`pwd | sed 's%^/tmp_mnt%%'`
+name=`basename "$suite"`
+
+files=`echo *`
+
+set -e
+
+mkdir "$dest/$name"
+cd "$dest/$name"
+
+ln -s "$suite" .testdir
+
+for f in $files; do
+  ln -s .testdir/$f .
+done
+
+rm -rf work
+
+echo "Shadow test suite created in \`$dest/$name'."
+exit 0

tests/run_make_tests

@@ -0,0 +1,2 @@
+#!/bin/sh
+exec perl $0.pl ${1+"$@"}

tests/run_make_tests.pl

@@ -0,0 +1,225 @@
+#!/usr/local/bin/perl
+# -*-perl-*-
+
+# Test driver for the Make test suite
+
+# Usage:  run_make_tests  [testname]
+#                         [-debug]
+#                         [-help]
+#                         [-verbose]
+#                         [-keep]
+#                         [-make <make prog>]
+#                        (and others)
+
+require "test_driver.pl";
+
+sub valid_option
+{
+   local($option) = @_;
+   if ($option =~ /^-make([-_]?path)?$/)
+   {
+      $make_path = shift @argv;
+      if (!-f $make_path)
+      {
+	 print "$option $make_path: Not found.\n";
+	 exit 0;
+      }
+      return 1;
+   }
+
+# This doesn't work--it _should_!  Someone needs to fix this badly.
+#
+#   elsif ($option =~ /^-work([-_]?dir)?$/)
+#   {
+#      $workdir = shift @argv;
+#      return 1;
+#   }
+
+   return 0;
+}
+
+sub run_make_with_options
+{
+   local ($filename,$options,$logname,$expected_code) = @_;
+   local($code);
+   local($command) = $make_path;
+
+   $expected_code = 0 unless defined($expected_code);
+
+   if ($filename)
+   {
+      $command .= " -f $filename";
+   }
+
+   if ($options)
+   {
+      $command .= " $options";
+   }
+
+   $code = &run_command_with_output($logname,$command);
+
+   # Check to see if we have Purify errors.  If so, keep the logfile.
+   # For this to work you need to build with the Purify flag -exit-status=yes
+
+   if ($pure_log && -f $pure_log) {
+     if ($code & 0x7000) {
+       $code &= ~0x7000;
+
+       # If we have a purify log, save it
+       $tn = $pure_testname . ($num_of_logfiles ? ".$num_of_logfiles" : "");
+       print("Renaming purify log file to $tn\n") if $debug;
+       rename($pure_log, "$tn")
+	 || die "Can't rename $log to $tn: $!\n";
+       ++$purify_errors;
+     }
+     else {
+       unlink($pure_log);
+     }
+   }
+
+   if ($code != $expected_code)
+   {
+      print "Error running $make_path ($code): $command\n";
+      $test_passed = 0;
+      return 0;
+   }
+
+   if ($profile & $vos)
+   {
+      system "add_profile $make_path";
+   }
+1;
+}
+
+sub print_usage
+{
+   &print_standard_usage ("run_make_tests", "[-make_path make_pathname]");
+}
+
+sub print_help
+{
+   &print_standard_help ("-make_path",
+          "\tYou may specify the pathname of the copy of make to run.");
+}
+
+sub get_this_pwd {
+  if ($vos) {
+    $delete_command = "delete_file";
+    $__pwd = `++(current_dir)`;
+  }
+  else {
+    $delete_command = "rm";
+    chop ($__pwd = `pwd`);
+  }
+
+  return $__pwd;
+}
+
+sub set_defaults
+{
+   # $profile = 1;
+   $testee = "GNU make";
+   $make_path = "make";
+   $tmpfilesuffix = "mk";
+   $pwd = &get_this_pwd;
+}
+
+sub set_more_defaults
+{
+   local($string);
+   local($index);
+
+   # find the type of the port.  We do this up front to have a single
+   # point of change if it needs to be tweaked.
+   #
+   # This is probably not specific enough.
+   #
+   if ($osname =~ /Windows/i) {
+     $port_type = 'W32';
+   }
+   # Bleah, the osname is so variable on DOS.  This kind of bites.
+   # Well, as far as I can tell if we check for some text at the
+   # beginning of the line with either no spaces or a single space, then
+   # a D, then either "OS", "os", or "ev" and a space.  That should
+   # match and be pretty specific.
+   elsif ($osname =~ /^([^ ]*|[^ ]* [^ ]*)D(OS|os|ev) /) {
+     $port_type = 'DOS';
+   }
+   # Everything else, right now, is UNIX.  Note that we should integrate
+   # the VOS support into this as well and get rid of $vos; we'll do
+   # that next time.
+   else {
+     $port_type = 'UNIX';
+   }
+
+   # Find the full pathname of Make.  For DOS systems this is more
+   # complicated, so we ask make itself.
+
+   $make_path = `sh -c 'echo "all:;\@echo \\\$(MAKE)" | $make_path -f-'`;
+   chop $make_path;
+   print "Make\t= `$make_path'\n" if $debug;
+
+   $string = `$make_path -v -f /dev/null 2> /dev/null`;
+
+   $string =~ /^(GNU Make [^,\n]*)/;
+   $testee_version = "$1\n";
+
+   $string = `sh -c "$make_path -f /dev/null 2>&1"`;
+   if ($string =~ /(.*): \*\*\* No targets\.  Stop\./) {
+     $make_name = $1;
+   }
+   else {
+     if ($make_path =~ /$pathsep([^\n$pathsep]*)$/) {
+       $make_name = $1;
+     }
+     else {
+       $make_name = $make_path;
+     }
+   }
+
+   # prepend pwd if this is a relative path (ie, does not
+   # start with a slash, but contains one).  Thanks for the
+   # clue, Roland.
+
+   if (index ($make_path, ":") != 1 && index ($make_path, "/") > 0)
+   {
+      $mkpath = "$pwd$pathsep$make_path";
+   }
+   else
+   {
+      $mkpath = $make_path;
+   }
+
+   # Get Purify log info--if any.
+
+   $ENV{PURIFYOPTIONS} =~ /.*-logfile=([^ ]+)/;
+   $pure_log = $1 || '';
+   $pure_log =~ s/%v/$make_name/;
+   $purify_errors = 0;
+
+   $string = `sh -c "$make_path -j 2 -f /dev/null 2>&1"`;
+   if ($string =~ /not supported/) {
+     $parallel_jobs = 0;
+   }
+   else {
+     $parallel_jobs = 1;
+   }
+}
+
+sub setup_for_test
+{
+  $makefile = &get_tmpfile;
+  if (-f $makefile) {
+    unlink $makefile;
+  }
+
+  # Get rid of any Purify logs.
+  if ($pure_log) {
+    ($pure_testname = $testname) =~ tr,/,_,;
+    $pure_testname = "$pure_log.$pure_testname";
+    system("rm -f $pure_testname*");
+    print("Purify testfiles are: $pure_testname*\n") if $debug;
+  }
+}
+
+exit !&toplevel;

tests/scripts/features/comments

@@ -0,0 +1,35 @@
+$description = "The following test creates a makefile to test comments\n"
+              ."and comment continuation to the next line using a \n"
+              ."backslash within makefiles.";
+
+$details = "To test comments within a makefile, a semi-colon was placed \n"
+          ."after a comment was started.  This should not be reported as\n"
+          ."an error since it is within a comment.  We then continue the \n"
+          ."comment to the next line using a backslash.  To test whether\n"
+          ."the comment really continued, we place an echo command with some\n"
+          ."text on the line which should never execute since it should be \n"
+          ."within a comment\n";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<\EOF;
+# Test comment vs semicolon parsing and line continuation
+target: # this ; is just a comment \
+	@echo This is within a comment. 
+	@echo There should be no errors for this makefile.
+EOF
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "There should be no errors for this makefile.\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1))

tests/scripts/features/conditionals

@@ -0,0 +1,67 @@
+#                                                                    -*-perl-*-
+$description = "Check GNU make conditionals.";
+
+$details = "Attempt various different flavors of GNU make conditionals.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE <<'EOMAKE';
+objects = foo.obj
+arg1 = first
+arg2 = second
+arg3 = third
+arg4 = cc
+arg5 = second
+
+all:
+ifeq ($(arg1),$(arg2))
+	@echo arg1 equals arg2
+else
+	@echo arg1 NOT equal arg2
+endif
+
+ifeq '$(arg2)' "$(arg5)"
+	@echo arg2 equals arg5
+else
+	@echo arg2 NOT equal arg5
+endif
+
+ifneq '$(arg3)' '$(arg4)'
+	@echo arg3 NOT equal arg4
+else
+	@echo arg3 equal arg4
+endif
+
+ifndef undefined
+	@echo variable is undefined
+else
+	@echo variable undefined is defined
+endif
+ifdef arg4
+	@echo arg4 is defined
+else
+	@echo arg4 is NOT defined
+endif
+
+EOMAKE
+
+close(MAKEFILE);
+
+&run_make_with_options($makefile,"",&get_logfile,0);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "arg1 NOT equal arg2
+arg2 equals arg5
+arg3 NOT equal arg4
+variable is undefined
+arg4 is defined
+";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1));
+
+# This tells the test driver that the perl test script executed properly.
+1;

tests/scripts/features/default_names

@@ -0,0 +1,65 @@
+#                                                                    -*-perl-*-
+
+$description = "This script tests to make sure that Make looks for
+default makefiles in the correct order (GNUmakefile,makefile,Makefile)";
+
+# Create a makefile called "GNUmakefile"
+$makefile = "GNUmakefile";
+
+open(MAKEFILE,"> $makefile");
+
+print MAKEFILE "FIRST: ; \@echo It chose GNUmakefile\n";
+
+close(MAKEFILE);
+
+# DOS/WIN32 platforms preserve case, but Makefile is the same file as makefile.
+# Just test what we can here (avoid Makefile versus makefile test).
+#
+if ($port_type eq 'UNIX')
+{
+  # Create another makefile called "makefile"
+  open(MAKEFILE,"> makefile");
+
+  print MAKEFILE "SECOND: ; \@echo It chose makefile\n";
+
+  close(MAKEFILE);
+}
+
+
+# Create another makefile called "Makefile"
+open(MAKEFILE,"> Makefile");
+
+print MAKEFILE "THIRD: ; \@echo It chose Makefile\n";
+
+close(MAKEFILE);
+
+
+&run_make_with_options("","",&get_logfile);
+
+# Create the answer to what should be produced by this Makefile
+$answer = "It chose GNUmakefile\n";
+
+# COMPARE RESULTS
+
+&compare_output($answer,&get_logfile(1)) || &error("abort");
+unlink $makefile;
+
+# DOS/WIN32 platforms preserve case, but Makefile is the same file as makefile.
+# Just test what we can here (avoid Makefile versus makefile test).
+#
+if ($port_type eq 'UNIX')
+{
+  $answer = "It chose makefile\n";
+
+  &run_make_with_options("","",&get_logfile);
+
+  &compare_output($answer,&get_logfile(1)) || &error("abort");
+  unlink "makefile";
+}
+
+$answer = "It chose Makefile\n";
+
+&run_make_with_options("","",&get_logfile);
+
+&compare_output($answer,&get_logfile(1)) || &error("abort");
+unlink "Makefile";

tests/scripts/features/double_colon

@@ -0,0 +1,48 @@
+$description = "The following test creates a makefile to test Double-Colon\n"
+              ."Rules.  They are rules which are written with '::' instead\n"
+              ."of ':' after the target names.  This tells make that each \n"
+              ."of these rules are independent of the others and each rule's\n"
+              ."commands are executed if the target is older than any \n"
+              ."dependencies of that rule.";
+
+$details = "The makefile created by this test contains two double-colon \n"
+          ."rules for foo; each with their own commands.  When make is run,\n"
+          ."each command should be executed in the sequence that they are \n"
+          ."found.  The command is a simple echo statement.";
+
+open(MAKEFILE,"> $makefile");
+
+# The Contents of the MAKEFILE ...
+
+print MAKEFILE "foo:: bar.h \n"
+              ."\t\@echo Executing rule foo FIRST\n"
+              ."foo2: bar.h \n"
+              ."foo:: bar2.h \n"
+              ."\t\@echo Executing rule foo SECOND\n";
+
+# END of Contents of MAKEFILE
+
+close(MAKEFILE);
+
+&touch("bar.h","bar2.h");
+
+&run_make_with_options($makefile,
+                       "",
+                       &get_logfile,
+                       0);
+
+
+$answer = "Executing rule foo FIRST\n"
+         ."Executing rule foo SECOND\n";
+
+&compare_output($answer,&get_logfile(1));
+
+unlink("bar.h","bar2.h");
+
+1;
+
+
+
+
+
+