GNU Make release 4.1.

* job.c (construct_command_argv_internal) [HAVE_DOS_PATHS]: Fix
initializer for sh_chars_sh.
Reported by Denis Excoffier<cygwin@Denis-Excoffier.org>.

.cvsignore

@@ -1,37 +0,0 @@
-*.gz *.Z *.tar *.tgz
-=*
-TODO COPYING* ABOUT-NLS
-make-3* make-test*
-*.info *.info-*
-stamp-*
-makebook*
-
-.*gdbinit
-.gdb_history
-
-*.dep *.dvi *.toc *.aux *.log
-*.cp *.cps *.fn *.fns *.vr *.vrs *.tp *.tps *.ky *.kys *.pg *.pgs
-
-README README.DOS README.W32 README.OS2
-aclocal.m4 autom4te.cache
-config.h.in config.h config.status config.cache configure
-Makefile.in Makefile
-build.sh.in build.sh
-SMakefile NMakefile Makefile.DOS
-config.ami configh.dos config.h.W32 config.h-vms
-
-loadavg loadavg.c make
-
-gmk-default.h
-
-.deps .dep_segment ID TAGS
-
-_*
-sun4 i386 i386-netbsd hp300-netbsd hp300 rs6000 sun3 news800 amiga
-hp700 hp834 mips sol2 i486-linux
-
-customs
-
-install-sh mkinstalldirs
-
-.directive.asc

.gitignore

@@ -0,0 +1,50 @@
+# Development artifacts
+ID
+TAGS
+.*gdbinit
+.gdb_history
+*~
+#*
+.#*
+
+# Configure artifacts
+ABOUT-NLS
+Makefile
+Makefile.in
+aclocal.m4
+autom4te.cache
+config.cache
+config.h
+config.h.in
+config.log
+config.status
+configure
+stamp-h1
+
+# Build artifacts
+.deps
+gmk-default.h
+loadavg
+make
+*.o
+
+# Distribution artifacts
+.dep_segment
+.check-git-HEAD
+ChangeLog
+Makefile.DOS
+NMakefile
+README
+README.DOS
+README.OS2
+README.W32
+SMakefile
+build.sh
+build.sh.in
+config.ami
+config.h-vms
+config.h.W32
+configh.dos
+make-[0-9]*/
+make-[0-9]*.tar.*
+checkcfg.*.log

AUTHORS

@@ -37,10 +37,11 @@ GNU make porting efforts:
   Port to MS-DOS (DJGPP), OS/2, and MS-Windows (native/MinGW) by:
       DJ Delorie <dj@delorie.com>
       Rob Tulloh <rob_tulloh@tivoli.com>
-      Eli Zaretskii <eliz@is.elta.co.il>
+      Eli Zaretskii <eliz@gnu.org>
       Jonathan Grant <jg@jguk.org>
       Andreas Beuning <andreas.buening@nexgo.de>
       Earnie Boyd <earnie@uses.sf.net>
+      Troy Runkel <Troy.Runkel@mathworks.com>
 
 -----------------------------------
 Other contributors:
@@ -64,12 +65,14 @@ Other contributors:
   Carl Staelin (Princeton University)
   Ian Stewartson (Data Logic Limited)
   David A. Wheeler <dwheeler@dwheeler.com>
+  David Boyce <dsb@boyski.com>
+  Frank Heckenbach <f.heckenbach@fh-soft.de>
 
 With suggestions/comments/bug reports from a cast of ... well ...
 hundreds, anyway :)
 
 -------------------------------------------------------------------------------
-Copyright (C) 1997-2012 Free Software Foundation, Inc.
+Copyright (C) 1997-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

ChangeLog.1

@@ -1703,7 +1703,7 @@ Thu Sep 14 18:29:38 1989  Roland McGrath  (mcgrath at paris.Berkeley.EDU)
 	existing variable's origin, is `o_env', make it `o_env_override'.
 
 	* load.c: Use the symbol KERNEL_FILE_NAME instead of KERNEL_FILE.
-	* compatMakefile: Changed the comment for `LOAD_AVG' accordinly.
+	* compatMakefile: Changed the comment for `LOAD_AVG' accordingly.
 
 Thu Sep  7 16:46:26 1989  Roland McGrath  (mcgrath at paris.Berkeley.EDU)
 
@@ -3218,7 +3218,7 @@ Sun Feb  5 19:52:38 1989  Roland McGrath  (mcgrath at paris.Berkeley.EDU)
 	* variable.c (expand_function: `shell'): Use
 	`shell_function_completed'.  Block children before forking and
 	unblock after `shell_function_pid' is set properly and
-	`shell_functon_completed' is reset to 0.
+	`shell_function_completed' is reset to 0.
 
 	* commands.c (child_handler): When the child of the `shell' function
 	completes, set `shell_function_completed' to 1 if it actually ran,
@@ -4465,7 +4465,7 @@ Fri Sep 16 13:59:59 1988  Roland McGrath  (mcgrath at tully.Berkeley.EDU)
 	`maxsuffix', and must be called before count_implicit_rule_limits.
 
 	* rule.c (pattern_search): If an existent (non-intermediate)
-	dependendency was found via a terminal rule, set its
+	dependency was found via a terminal rule, set its
 	`tried_implicit' flag, so it will never have implicit rule search done.
 
 	* glob.c: Bug fix to avoid alloca(0).
@@ -4826,7 +4826,7 @@ Sat Jul 30 15:47:23 1988  Roland McGrath  (mcgrath at tully.Berkeley.EDU)
 	new entry as the old entry's prev pointer.
 
 	* dir.c: Re-indented the `struct dir' definition to be right.
-	(dir_load): Cleaned up slighty.
+	(dir_load): Cleaned up slightly.
 	(file_exists_p): Removed comment saying we could use `access', since
 	that is a bad idea (except for setuid programs).  Cleaned up slightly.
 

ChangeLog.2

@@ -3080,7 +3080,7 @@ Sun May 12 19:19:43 1996  Aaron Digulla   <digulla@fh-konstanz.de>
 	* main.c: (main), variable.c Changed handling of ENV-vars. Make
 	stores now the names of the variables only and reads their contents
 	when they are accessed to reflect that these variables are really
-	global (ie. they CAN change WHILE make runs !) This handling is
+	global (i.e., they CAN change WHILE make runs !) This handling is
 	made in lookup_variable()
 
 	* Makefile.ami: renamed file.h to filedep.h
@@ -6630,9 +6630,9 @@ Fri Nov  1 19:34:28 1991  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
 
 
 
-See ChangeLog.1, available in the CVS repository at:
+See ChangeLog.1, available in the Git repository at:
 
-	http://savannah.gnu.org/cvs/?group=make
+	http://git.savannah.gnu.org/cgit/make.git/tree/
 
 for earlier changes.
 

Makefile.DOS.template

@@ -1,7 +1,7 @@
 # -*-Makefile-*- template for DJGPP
 # Makefile.in generated automatically by automake 1.2 from Makefile.am
 #
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -88,7 +88,7 @@ INCLUDES =	-I$(srcdir)/glob -DLIBDIR=\"$(prefix)$(libdir)\" -DINCLUDEDIR=\"$(pre
 
 BUILT_SOURCES =	README build.sh-in
 
-EXTRA_DIST = 	$(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c  make-stds.texi texinfo.tex SCOPTIONS SMakefile  Makefile.ami README.Amiga config.ami amiga.c amiga.h  NMakefile README.DOS configh.dos configure.bat makefile.com  README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk  config.h-vms makefile.vms readme.vms vmsdir.h vmsfunctions.c  vmsify.c gmk-default.scm gmk-default.h
+EXTRA_DIST =	$(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c  make-stds.texi texinfo.tex SCOPTIONS SMakefile  Makefile.ami README.Amiga config.ami amiga.c amiga.h  NMakefile README.DOS configh.dos configure.bat makefile.com  README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk  config.h-vms makefile.vms README.VMS vmsdir.h vmsfunctions.c  vmsify.c gmk-default.scm gmk-default.h
 
 SUBDIRS =	glob doc
 mkinstalldirs = ${exec_prefix}/bin/gmkdir -p
@@ -122,7 +122,7 @@ man1dir = $(mandir)/man1
 MANS = $(man_MANS)
 
 NROFF = nroff
-DIST_COMMON =  README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am  Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh-in config.h-in  configure configure.in getloadavg.c
+DIST_COMMON =  README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am  Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh-in config.h-in  configure configure.ac getloadavg.c
 
 DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
 
@@ -506,7 +506,7 @@ html
 #
 dist-hook:
 	(cd $(srcdir); \
-	 w32=`find w32 -follow \( -name CVS -prune \) -o -type f -print`; \
+	 w32=`find w32 -follow \( -name .git -prune \) -o -type f -print`; \
 	 tar chf - $$w32) \
 	| (cd $(distdir); tar xfBp -)
 

Makefile.am

@@ -1,6 +1,6 @@
 # This is a -*-Makefile-*-, or close enough
 #
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -31,6 +31,7 @@ endif
 SUBDIRS =	glob config po doc $(MAYBE_W32)
 
 bin_PROGRAMS =	make
+include_HEADERS = gnumake.h
 
 if USE_CUSTOMS
   remote =	remote-cstms.c
@@ -39,19 +40,15 @@ else
 endif
 
 make_SOURCES =	ar.c arscan.c commands.c default.c dir.c expand.c file.c \
-		function.c getopt.c getopt1.c implicit.c job.c load.c main.c \
-		misc.c read.c remake.c rule.c signame.c \
-		strcache.c variable.c version.c vpath.c hash.c \
+		function.c getopt.c getopt1.c guile.c implicit.c job.c load.c \
+		loadapi.c main.c misc.c output.c read.c remake.c rule.c \
+		signame.c strcache.c variable.c version.c vpath.c hash.c \
 		$(remote)
 
-if HAVE_GUILE
-  make_SOURCES += guile.c
-endif
-
 EXTRA_make_SOURCES = vmsjobs.c remote-stub.c remote-cstms.c
 
-noinst_HEADERS = commands.h dep.h filedef.h job.h make.h rule.h variable.h \
-		debug.h getopt.h gettext.h hash.h
+noinst_HEADERS = commands.h dep.h filedef.h job.h makeint.h rule.h variable.h \
+		debug.h getopt.h gettext.h hash.h output.h
 
 make_LDADD =	@LIBOBJS@ @ALLOCA@ $(GLOBLIB) @GETLOADAVG_LIBS@ @LIBINTL@ \
 		$(GUILE_LIBS)
@@ -81,7 +78,7 @@ EXTRA_DIST =	README build.sh.in $(man_MANS) \
 		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
 		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat \
 		make_msvc_net2003.sln make_msvc_net2003.vcproj \
-		readme.vms makefile.vms makefile.com config.h-vms \
+		README.VMS makefile.vms makefile.com config.h-vms \
 		vmsdir.h vmsfunctions.c vmsify.c \
 		gmk-default.scm gmk-default.h
 
@@ -89,13 +86,6 @@ EXTRA_DIST =	README build.sh.in $(man_MANS) \
 
 DISTCLEANFILES = build.sh
 
-# Forward targets
-
-html:
-	cd doc && $(MAKE) $(AM_MAKEFLAGS) $@
-
-.PHONY: html
-
 # --------------- Internationalization Section
 
 localedir =	$(datadir)/locale
@@ -144,7 +134,7 @@ gmk-default.h: $(srcdir)/gmk-default.scm
 #
 dist-hook:
 	(cd $(srcdir); \
-	 sub=`find w32 tests -follow \( -name CVS -o -name .deps -o -name work -o -name .cvsignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \
+	 sub=`find w32 tests -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \
 	 tar chf - $$sub) \
 	| (cd $(distdir); tar xfBp -)
 
@@ -182,19 +172,19 @@ loadavg_LDADD = @GETLOADAVG_LIBS@
 #
 MAKETESTFLAGS =
 
-check-regression:
-	@if test -f "$(srcdir)/tests/run_make_tests"; then \
+check-regression: tests/config-flags.pm
+	@if test -f '$(srcdir)/tests/run_make_tests'; then \
 	  if $(PERL) -v >/dev/null 2>&1; then \
-	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
+	    case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \
 	      *) test -d tests || mkdir tests; \
 		 rm -f srctests; \
-		 if ln -s "$(srcdir)/tests" srctests; then \
+		 if ln -s '$(srcdir)/tests' srctests; then \
 		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
 		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
 		   done; fi ;; \
 	    esac; \
-	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
-	    cd tests && $(PERL) ./run_make_tests.pl -make ../make$(EXEEXT) $(MAKETESTFLAGS); \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
 	  else \
 	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
 	  fi; \
@@ -206,7 +196,7 @@ check-regression:
 # --------------- Maintainer's Section
 
 # Tell automake that I haven't forgotten about this file and it will be
-# created before we build a distribution (see maintMakefile in the CVS
+# created before we build a distribution (see maintMakefile in the Git
 # distribution).
 
 README:

Makefile.ami

@@ -3,7 +3,7 @@
 # NOTE: If you have no 'make' program at all to process this makefile, run
 # 'build.sh' instead.
 #
-# Copyright (C) 1995-2012 Free Software Foundation, Inc.
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -134,7 +134,7 @@ srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
        $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c           \
        $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)           \
        $(srcdir)commands.h $(srcdir)dep.h $(srcdir)filedep.h         \
-       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
+       $(srcdir)job.h $(srcdir)makeint.h $(srcdir)rule.h             \
        $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
 
 
@@ -273,36 +273,36 @@ $(objs): config.h
 # Automatically generated dependencies will be put at the end of the file.
 
 # Automatically generated dependencies.
-commands.o: commands.c make.h dep.h filedef.h variable.h job.h \
+commands.o: commands.c makeint.h dep.h filedef.h variable.h job.h \
  commands.h
-job.o: job.c make.h job.h filedef.h commands.h variable.h
-dir.o: dir.c make.h
-file.o: file.c make.h dep.h filedef.h job.h commands.h variable.h
-misc.o: misc.c make.h dep.h
-main.o: main.c make.h dep.h filedef.h variable.h job.h commands.h \
+job.o: job.c makeint.h job.h filedef.h commands.h variable.h
+dir.o: dir.c makeint.h
+file.o: file.c makeint.h dep.h filedef.h job.h commands.h variable.h
+misc.o: misc.c makeint.h dep.h
+main.o: main.c makeint.h dep.h filedef.h variable.h job.h commands.h \
  getopt.h
-guile.o: guile.c make.h dep.h debug.h variable.h gmk-default.h
-read.o: read.c make.h dep.h filedef.h job.h commands.h variable.h \
+guile.o: guile.c makeint.h dep.h debug.h variable.h gmk-default.h
+read.o: read.c makeint.h dep.h filedef.h job.h commands.h variable.h \
  glob/glob.h
-remake.o: remake.c make.h filedef.h job.h commands.h dep.h
-rule.o: rule.c make.h dep.h filedef.h job.h commands.h variable.h \
+remake.o: remake.c makeint.h filedef.h job.h commands.h dep.h
+rule.o: rule.c makeint.h dep.h filedef.h job.h commands.h variable.h \
  rule.h
-implicit.o: implicit.c make.h rule.h dep.h filedef.h
-default.o: default.c make.h rule.h dep.h filedef.h job.h commands.h \
+implicit.o: implicit.c makeint.h rule.h dep.h filedef.h
+default.o: default.c makeint.h rule.h dep.h filedef.h job.h commands.h \
  variable.h
-variable.o: variable.c make.h dep.h filedef.h job.h commands.h \
+variable.o: variable.c makeint.h dep.h filedef.h job.h commands.h \
  variable.h
-expand.o: expand.c make.h filedef.h job.h commands.h variable.h
-function.o: function.c make.h filedef.h variable.h dep.h job.h \
+expand.o: expand.c makeint.h filedef.h job.h commands.h variable.h
+function.o: function.c makeint.h filedef.h variable.h dep.h job.h \
  commands.h amiga.h
-vpath.o: vpath.c make.h filedef.h variable.h
-strcache.o: strcache.c make.h hash.h
+vpath.o: vpath.c makeint.h filedef.h variable.h
+strcache.o: strcache.c makeint.h hash.h
 version.o: version.c
-ar.o: ar.c make.h filedef.h dep.h
-arscan.o: arscan.c make.h
+ar.o: ar.c makeint.h filedef.h dep.h
+arscan.o: arscan.c makeint.h
 signame.o: signame.c signame.h
-remote-stub.o: remote-stub.c make.h filedef.h job.h commands.h
+remote-stub.o: remote-stub.c makeint.h filedef.h job.h commands.h
 getopt.o: getopt.c
 getopt1.o : getopt1.c getopt.h
 getloadavg.o: getloadavg.c
-amiga.o: amiga.c make.h variable.h amiga.h
+amiga.o: amiga.c makeint.h variable.h amiga.h

NEWS

@@ -1,6 +1,6 @@
 GNU make NEWS                                               -*-indented-text-*-
   History of user-visible changes.
-  05 March 2012
+  05 Oct 2014
 
 See the end of this file for copyrights and conditions.
 
@@ -9,7 +9,28 @@ manual, which is contained in this distribution as the file doc/make.texi.
 See the README file and the GNU make manual for instructions for
 reporting bugs.
 
-Version 3.99.90
+Version 4.1 (05 Oct 2014)
+
+A complete list of bugs fixed in this version is available here:
+
+http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=105&set=custom
+
+* New variables: $(MAKE_TERMOUT) and $(MAKE_TERMERR) are set to non-empty
+  values if stdout or stderr, respectively, are believed to be writing to a
+  terminal.  These variables are exported by default.
+
+* Allow a no-text-argument form of the $(file ...) function.  Without a text
+  argument nothing is written to the file: it is simply opened in the
+  requested mode, then closed again.
+
+* Change the fatal error for mixed explicit and implicit rules, that was
+  introduced in GNU make 3.82, to a non-fatal error.  However, this syntax is
+  still deprecated and may return to being illegal in a future version of GNU
+  make.  Makefiles that rely on this syntax should be fixed.
+  See https://savannah.gnu.org/bugs/?33034
+
+
+Version 4.0 (09 Oct 2013)
 
 A complete list of bugs fixed in this version is available here:
 
@@ -23,17 +44,40 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set
   * Each backslash/newline (plus subsequent whitespace) is converted to a
     single space
 
+* New feature: GNU Guile integration
+  This version of GNU make can be compiled with GNU Guile integration.
+  GNU Guile serves as an embedded extension language for make.
+  See the "Guile Function" section in the GNU Make manual for details.
+  Currently GNU Guile 1.8 and 2.0+ are supported.  In Guile 1.8 there is no
+  support for internationalized character sets.  In Guile 2.0+, scripts can be
+  encoded in UTF-8.
+
+* New command line option: --output-sync (-O) enables grouping of output by
+  target or by recursive make.  This is useful during parallel builds to avoid
+  mixing output from different jobs together giving hard-to-understand
+  results.  Original implementation by David Boyce <dsb@boyski.com>.
+  Reworked and enhanced by Frank Heckenbach <f.heckenbach@fh-soft.de>.
+  Windows support by Eli Zaretskii <eliz@gnu.org>.
+
 * New command line option: --trace enables tracing of targets.  When enabled
   the recipe to be invoked is printed even if it would otherwise be suppressed
   by .SILENT or a "@" prefix character.  Also before each recipe is run the
   makefile name and linenumber where it was defined are shown as well as the
   prerequisites that caused the target to be considered out of date.
 
+* New command line option argument: --debug now accepts a "n" (none) flag
+  which disables all debugging settings that are currently enabled.
+
 * New feature: The "job server" capability is now supported on Windows.
   Implementation contributed by Troy Runkel <Troy.Runkel@mathworks.com>
 
+* New feature: The .ONESHELL capability is now supported on Windows.  Support
+  added by Eli Zaretskii <eliz@gnu.org>.
+
 * New feature: "!=" shell assignment operator as an alternative to the
   $(shell ...) function.  Implemented for compatibility with BSD makefiles.
+  Note there are subtle differences between "!=" and $(shell ...).  See the
+  description in the GNU make manual.
   WARNING: Backward-incompatibility!
   Variables ending in "!" previously defined as "variable!= value" will now be
   interpreted as shell assignment.  Change your assignment to add whitespace
@@ -45,11 +89,6 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set
   version of POSIX (see http://austingroupbugs.net/view.php?id=330).  It is
   not necessary to define the .POSIX target to access this operator.
 
-* New feature: GNU Guile integration
-  This version of GNU make can be compiled with GNU Guile integration.
-  GNU Guile serves as an embedded extension language for make.
-  See the "Guile Function" section in the GNU Make manual for details.
-
 * New feature: Loadable objects
   This version of GNU make contains a "technology preview": the ability to
   load dynamic objects into the make runtime.  These objects can be created by
@@ -57,8 +96,27 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set
 
 * New function: $(file ...) writes to a file.
 
-* On failure, the makefile name and linenumber of the recipe that failed are
-  shown.
+* New variable: $(GNUMAKEFLAGS) will be parsed for make flags, just like
+  MAKEFLAGS is.  It can be set in the environment or the makefile, containing
+  GNU make-specific flags to allow your makefile to be portable to other
+  versions of make.  Once this variable is parsed, GNU make will set it to the
+  empty string so that flags will not be duplicated on recursion.
+
+* New variable: `MAKE_HOST' gives the name of the host architecture
+  make was compiled for.  This is the same value you see after 'Built for'
+  when running 'make --version'.
+
+* Behavior of MAKEFLAGS and MFLAGS is more rigorously defined.  All simple
+  flags are grouped together in the first word of MAKEFLAGS.  No options that
+  accept arguments appear in the first word.  If no simple flags are present
+  MAKEFLAGS begins with a space.  Flags with both short and long versions
+  always use the short versions in MAKEFLAGS.  Flags are listed in
+  alphabetical order using ASCII ordering.  MFLAGS never begins with "- ".
+
+* Setting the -r and -R options in MAKEFLAGS inside a makefile now works as
+  expected, removing all built-in rules and variables, respectively.
+
+* If a recipe fails, the makefile name and linenumber of the recipe are shown.
 
 * A .RECIPEPREFIX setting is remembered per-recipe and variables expanded
   in that recipe also use that recipe prefix setting.
@@ -66,8 +124,17 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set
 * In -p output, .RECIPEPREFIX settings are shown and all target-specific
   variables are output as if in a makefile, instead of as comments.
 
+* On MS-Windows, recipes that use ".." quoting will no longer force
+  invocation of commands via temporary batch files and stock Windows
+  shells, they will be short-circuited and invoked directly.  (In
+  other words, " is no longer a special character for stock Windows
+  shells.)  This avoids hitting shell limits for command length when
+  quotes are used, but nothing else in the command requires the shell.
+  This change could potentially mean some minor incompatibilities in
+  behavior when the recipe uses quoted string on shell command lines.
+
 
-Version 3.82
+Version 3.82 (28 Jul 2010)
 
 A complete list of bugs fixed in this version is available here:
 
@@ -97,15 +164,6 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=104&set
   results from wildcard expansions, use the $(sort ...)  function to request
   it explicitly.
 
-* WARNING: Backward-incompatibility!
-  In previous versions of make it was acceptable to list one or more explicit
-  targets followed by one or more pattern targets in the same rule and it
-  worked "as expected".  However, this was not documented as acceptable and if
-  you listed any explicit targets AFTER the pattern targets, the entire rule
-  would be mis-parsed.  This release removes this ability completely: make
-  will generate an error message if you mix explicit and pattern targets in
-  the same rule.
-
 * WARNING: Backward-incompatibility!
   As a result of parser enhancements, three backward-compatibility issues
   exist: first, a prerequisite containing an "=" cannot be escaped with a
@@ -180,7 +238,7 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=104&set
   multi-line variable assignment.
 
 
-Version 3.81
+Version 3.81 (01 Apr 2006)
 
 * GNU make is ported to OS/2.
 
@@ -193,8 +251,8 @@ Version 3.81
   any prerequisite that does not exist, even though that prerequisite
   might have caused the target to rebuild.  Starting with the _next_
   release of GNU make, '$?' will contain all prerequisites that caused
-  the target to be considered out of date.  See this Savannah bug:
-  http://savannah.gnu.org/bugs/index.php?func=detailitem&item_id=16051
+  the target to be considered out of date.
+  See http://savannah.gnu.org/bugs/?16051
 
 * WARNING: Backward-incompatibility!
   GNU make now implements a generic "second expansion" feature on the
@@ -303,7 +361,7 @@ Version 3.81
   could be found on the system.
 
 * On VMS there is now support for case-sensitive filesystems such as ODS5.
-  See the readme.vms file for information.
+  See the README.VMS file for information.
 
 * Parallel builds (-jN) no longer require a working Bourne shell on
   Windows platforms.  They work even with the stock Windows shells, such
@@ -321,7 +379,7 @@ A complete list of bugs fixed in this version is available here:
   http://savannah.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=103
 
 
-Version 3.80
+Version 3.80 (03 Oct 2002)
 
 * A new feature exists: order-only prerequisites.  These prerequisites
   affect the order in which targets are built, but they do not impact
@@ -403,7 +461,7 @@ A complete list of bugs fixed in this version is available here:
   http://savannah.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=102
 
 
-Version 3.79.1
+Version 3.79.1 (23 Jun 2000)
 
 * .SECONDARY with no prerequisites now prevents any target from being
   removed because make thinks it's an intermediate file, not just those
@@ -412,7 +470,7 @@ Version 3.79.1
 * New configure option --disable-nsec-timestamps, but this was
   superseded in later versions by the .LOW_RESOLUTION_TIME pseudo-target.
 
-Version 3.79
+Version 3.79 (04 Apr 2000)
 
 * GNU make optionally supports internationalization and locales via the
   GNU gettext (or local gettext if suitable) package.  See the ABOUT-NLS
@@ -453,9 +511,9 @@ Version 3.79
   returned.
 
 * Hartmut Becker provided many updates for the VMS port of GNU make.
-  See the readme.vms file for more details.
+  See the README.VMS file for more details.
 
-Version 3.78
+Version 3.78 (22 Sep 1999)
 
 * Two new functions, $(error ...) and $(warning ...) are available.  The
   former will cause make to fail and exit immediately upon expansion of
@@ -511,7 +569,7 @@ Version 3.78
   by running "make check" in the distribution.  Note that it requires
   Perl (either Perl 4 or Perl 5) to run.
 
-Version 3.77
+Version 3.77 (28 Jul 1998)
 
 * Implement BSD make's "?=" variable assignment operator.  The variable
   is assigned the specified value only if that variable is not already
@@ -557,11 +615,11 @@ Version 3.77
 * Updates to the Windows 95/NT port from Rob Tulloh (see README.W32),
   and to the DOS port from Eli Zaretski (see README.DOS).
 
-Version 3.76.1
+Version 3.76.1 (19 Sep 1997)
 
 * Small (but serious) bug fix.  Quick rollout to get into the GNU source CD.
 
-Version 3.76
+Version 3.76 (16 Sep 1997)
 
 * GNU make now uses automake to control Makefile.in generation.  This
   should make it more consistent with the GNU standards.
@@ -606,7 +664,7 @@ Version 3.76
 
 * John W. Eaton has updated the VMS port to support libraries and VPATH.
 
-Version 3.75
+Version 3.75 (27 Aug 1996)
 
 * The directory messages printed by `-w' and implicitly in sub-makes,
   are now omitted if Make runs no commands and has no other messages to print.
@@ -627,7 +685,7 @@ Version 3.75
   See README.W32 for details, and direct all Windows-related questions to
   <rob_tulloh@tivoli.com>.
 
-Version 3.73
+Version 3.73 (05 Apr 1995)
 
 * Converted to use Autoconf version 2, so `configure' has some new options.
   See INSTALL for details.
@@ -635,7 +693,7 @@ Version 3.73
 * You can now send a SIGUSR1 signal to Make to toggle printing of debugging
   output enabled by -d, at any time during the run.
 
-Version 3.72
+Version 3.72 (04 Nov 1994)
 
 * DJ Delorie has ported Make to MS-DOS using the GO32 extender.
   He is maintaining the DOS port, not the GNU Make maintainer;
@@ -669,7 +727,7 @@ Version 3.72
   of `.SILENT', then the recipe to update that file will not be printed
   before it is run.  (This change was made to conform to POSIX.2.)
 
-Version 3.71
+Version 3.71 (21 May 1994)
 
 * The automatic variables `$(@D)', `$(%D)', `$(*D)', `$(<D)', `$(?D)', and
   `$(^D)' now omit the trailing slash from the directory name.  (This change
@@ -691,7 +749,7 @@ Version 3.71
   The exit status is 1 only when using -q and some target is not up to date.
   (This change was made to comply with POSIX.2.)
 
-Version 3.70
+Version 3.70 (03 Jan 1994)
 
 * It is no longer a fatal error to have a NUL character in a makefile.
   You should never put a NUL in a makefile because it can have strange
@@ -702,7 +760,7 @@ Version 3.70
   makefile name and line number where the `include' appeared, so Emacs's
   C-x ` command takes you there (in case it's a typo you need to fix).
 
-Version 3.69
+Version 3.69 (07 Nov 1993)
 
 * Implicit rule search for archive member references is now done in the
   opposite order from previous versions: the whole target name `LIB(MEM)'
@@ -721,7 +779,7 @@ Version 3.69
   have reversed the change made in version 3.68 because it turned out to
   cause a paradoxical situation in cases like:
 
-	export variable = $(shell echo value)
+        export variable = $(shell echo value)
 
   When Make attempted to put this variable in the environment for a
   recipe, it would try expand the value by running the shell command
@@ -732,7 +790,7 @@ Version 3.69
 * The recipe given for `.DEFAULT' is now used for phony targets with no
   recipe.
 
-Version 3.68
+Version 3.68 (28 Jul 1993)
 
 * You can list several archive member names inside parenthesis:
   `lib(mem1 mem2 mem3)' is equivalent to `lib(mem1) lib(mem2) lib(mem3)'.
@@ -744,8 +802,8 @@ Version 3.68
   foo.a(b.o) bar.a(c.o) bar.a(d.o)'.
 
 * A suffix rule `.X.a' now produces two pattern rules:
-	(%.o): %.X	# Previous versions produced only this.
-	%.a: %.X	# Now produces this as well, just like other suffixes.
+        (%.o): %.X	# Previous versions produced only this.
+        %.a: %.X	# Now produces this as well, just like other suffixes.
 
 * The new flag `--warn-undefined-variables' says to issue a warning message
   whenever Make expands a reference to an undefined variable.
@@ -758,16 +816,16 @@ Version 3.68
   to set up variables for them.  They used to run with the environment
   that `make' started with.
 
-Version 3.66
+Version 3.66 (21 May 1993)
 
 * `make --version' (or `make -v') now exits immediately after printing
   the version number.
 
-Version 3.65
+Version 3.65 (09 May 1993)
 
 * Make now supports long-named members in `ar' archive files.
 
-Version 3.64
+Version 3.64 (21 Apr 1993)
 
 * Make now supports the `+=' syntax for a variable definition which appends
   to the variable's previous value.  See the section `Appending More Text
@@ -781,7 +839,7 @@ Version 3.64
 * The built-in implicit rules now support the alternative extension
   `.txinfo' for Texinfo files, just like `.texinfo' and `.texi'.
 
-Version 3.63
+Version 3.63 (22 Jan 1993)
 
 * Make now uses a standard GNU `configure' script.  See the new file
   INSTALL for the new (and much simpler) installation procedure.
@@ -815,15 +873,15 @@ Version 3.63
   no longer automatically put into the environments of the recipe lines that
   Make runs.  Instead, only variables specified on the command line or in
   the environment are exported by default.  To export others, use:
-	export VARIABLE
+        export VARIABLE
   or you can define variables with:
-	export VARIABLE = VALUE
+        export VARIABLE = VALUE
   or:
-	export VARIABLE := VALUE
+        export VARIABLE := VALUE
   You can use just:
-	export
+        export
   or:
-	.EXPORT_ALL_VARIABLES:
+        .EXPORT_ALL_VARIABLES:
   to get the old behavior.  See the node `Variables/Recursion' in the manual
   for a full description.
 
@@ -843,9 +901,9 @@ Version 3.63
 
 * A single `include' directive can now specify more than one makefile to
   include, like this:
-	include file1 file2
+        include file1 file2
   You can also use shell file name patterns in an `include' directive:
-	include *.mk
+        include *.mk
 
 * The default directories to search for included makefiles, and for
   libraries specified with `-lNAME', are now set by configuration.
@@ -981,7 +1039,7 @@ Version 3.49
 * The `wildcard' variable expansion function now expands ~ and ~USER.
 
 * Messages indicating failed recipe lines now contain the target name:
-	make: *** [target] Error 1
+        make: *** [target] Error 1
 
 * The `-p' output format has been changed somewhat to look more like
   makefile rules and to give all information that Make has about files.
@@ -1161,7 +1219,7 @@ Version 3.05
 (Changes from versions 1 through 3.05 were never recorded.  Sorry.)
 
 -------------------------------------------------------------------------------
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

NMakefile.template

@@ -3,7 +3,7 @@
 # NOTE: If you have no 'make' program at all to process this makefile,
 # run 'build_w32.bat' instead.
 #
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -32,9 +32,9 @@ CFLAGS_debug = $(CFLAGS_any) /Od /D DEBUG /D _DEBUG /FR.\WinDebug/ /Fp.\WinDebug
 CFLAGS_release = $(CFLAGS_any) /O2 /D NDEBUG /FR.\WinRel/ /Fp.\WinRel/make.pch /Fo.\WinRel/
 
 LDFLAGS_debug = w32\subproc\WinDebug\subproc.lib /NOLOGO /SUBSYSTEM:console\
-	/INCREMENTAL:no /PDB:WinDebug/make.pdb /OUT:WinDebug/make.exe /DEBUG
+	/STACK:0x400000 /INCREMENTAL:no /PDB:WinDebug/make.pdb /OUT:WinDebug/make.exe /DEBUG
 LDFLAGS_release = w32\subproc\WinRel\subproc.lib /NOLOGO /SUBSYSTEM:console\
-	/INCREMENTAL:no /OUT:WinRel/make.exe
+	/STACK:0x400000 /INCREMENTAL:no /OUT:WinRel/make.exe
 
 all: config.h subproc Release Debug
 
@@ -72,7 +72,7 @@ $(OUTDIR):
 
 LIBS = kernel32.lib user32.lib advapi32.lib
 
-#guile = $(OUTDIR)/guile.obj
+guile = $(OUTDIR)/guile.obj
 
 OBJS = \
 	$(OUTDIR)/ar.obj \
@@ -89,8 +89,10 @@ OBJS = \
 	$(OUTDIR)/hash.obj \
 	$(OUTDIR)/implicit.obj \
 	$(OUTDIR)/job.obj \
+	$(OUTDIR)/load.obj \
 	$(OUTDIR)/main.obj \
 	$(OUTDIR)/misc.obj \
+	$(OUTDIR)/output.obj \
 	$(OUTDIR)/read.obj \
 	$(OUTDIR)/remake.obj \
 	$(OUTDIR)/remote-stub.obj \
@@ -104,6 +106,7 @@ OBJS = \
 	$(OUTDIR)/fnmatch.obj \
 	$(OUTDIR)/dirent.obj \
 	$(OUTDIR)/pathstuff.obj \
+	$(OUTDIR)/posixfcn.obj \
 	$(guile)
 
 $(OUTDIR)/make.exe: $(OUTDIR) $(OBJS)
@@ -120,5 +123,7 @@ $(OUTDIR)/fnmatch.obj : glob/fnmatch.c
 	$(CC) $(CFLAGS) /c $?
 $(OUTDIR)/dirent.obj : w32/compat/dirent.c
 	$(CC) $(CFLAGS) /c $?
+$(OUTDIR)/posixfcn.obj : w32/compat/posixfcn.c
+	$(CC) $(CFLAGS) /c $?
 $(OUTDIR)/pathstuff.obj : w32/pathstuff.c
 	$(CC) $(CFLAGS) /c $?

README.Amiga

@@ -11,7 +11,7 @@ GNU make):
 - Can run multi-line statements
 - Allows to use Device-Names in targets:
 
-	c:make : make.o
+        c:make : make.o
 
     is ok. To distinguish between device-names and target : or ::, MAKE
     looks for spaces. If there are any around :, it's taken as a target
@@ -19,14 +19,14 @@ GNU make):
     that "make:make.o" tries to create "make.o" on the device "make:".
 - Replaces @@ by a newline in any command line:
 
-	if exists make @@\
-	    delete make.bak quiet @@\
-	    rename make make.bak @@\
-	endif @@\
-	$(CC) Link Make.o To make
+        if exists make @@\
+            delete make.bak quiet @@\
+            rename make make.bak @@\
+        endif @@\
+        $(CC) Link Make.o To make
 
-    works. Note that the @@ must stand alone (ie. "make@@\" is illegal).
-    Also be carefull that there is a space after the "\" (ie, at the
+    works. Note that the @@ must stand alone (i.e., "make@@\" is illegal).
+    Also be careful that there is a space after the "\" (i.e., at the
     beginning of the next line).
 - Can be made resident to save space and time
 - Amiga specific wildcards can be used in $(wildcard ...)
@@ -36,17 +36,17 @@ BUGS:
 
     dummy.h : src/*.c
 
-tries to make dummy.h from "src/*.c" (ie. no wildcard-expansion takes
+tries to make dummy.h from "src/*.c" (i.e., no wildcard-expansion takes
 place). You have to use "$(wildcard src/*.c)" instead.
 
 COMPILING FROM SCRATCH
 ----------------------
 
-To recompile, you need SAS/C 6.51. make itself is not neccessary, there
+To recompile, you need SAS/C 6.51. make itself is not necessary, there
 is an smakefile.
 
 1. Copy config.ami to config.h
-2. If you use make to compie, copy Makefile.ami to Makefile and
+2. If you use make to compile, copy Makefile.ami to Makefile and
     glob/Makefile.ami to glob/Makefile. Copy make into the current
     directory.
 
@@ -54,14 +54,14 @@ is an smakefile.
 
 INSTALLATION
 
-Copy make somewhere in your search path (eg. sc:c or sc:bin).
+Copy make somewhere in your search path (e.g., sc:c or sc:bin).
 If you plan to use recursive makes, install make resident:
 
     Resident make Add
 
 
 -------------------------------------------------------------------------------
-Copyright (C) 1995-2012 Free Software Foundation, Inc.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.DOS.template

@@ -62,7 +62,7 @@ To build from sources:
       [Enter].  Otherwise, you need to supply the path to the source
       directory as an argument to the batch file, like this:
 
-	c:\djgpp\gnu\make-%VERSION%\configure.bat c:/djgpp/gnu/make-%VERSION%
+        c:\djgpp\gnu\make-%VERSION%\configure.bat c:/djgpp/gnu/make-%VERSION%
 
       Note the forward slashes in the source path argument: you MUST
       use them here.
@@ -84,7 +84,7 @@ To build from sources:
       If you are building from outside of the source directory, you
       need to tell Make where the sources are, like this:
 
-	        make srcdir=c:/djgpp/gnu/make-%VERSION%
+                make srcdir=c:/djgpp/gnu/make-%VERSION%
 
       (configure.bat will tell you this when it finishes).  You MUST
       use a full, not relative, name of the source directory here, or
@@ -99,7 +99,7 @@ To build from sources:
       area.  If you wish to use a different directory, override the
       DESTDIR variable when invoking "make install", like this:
 
-		make install DESTDIR=c:/other/dir
+                make install DESTDIR=c:/other/dir
 
       This causes the make executable to be placed in c:/other/dir/bin,
       the man pages in c:/other/dir/man, etc.
@@ -110,12 +110,12 @@ To build from sources:
       file 'dir' in your Info directory by adding the following item
       to the main menu:
 
-	* Make: (make.info).           The GNU make utility.
+        * Make: (make.info).           The GNU make utility.
 
       If you have the 'install-info' program (from the GNU Texinfo
       package), it will do that for you if you invoke it like this:
 
-	install-info --info-dir=c:/djgpp/info c:/djgpp/info/make.info
+        install-info --info-dir=c:/djgpp/info c:/djgpp/info/make.info
 
       (If your Info directory is other than C:\DJGPP\INFO, change this
       command accordingly.)
@@ -320,11 +320,11 @@ Bug reports:
 
 
    Enjoy,
-			Eli Zaretskii <eliz@is.elta.co.il>
+                        Eli Zaretskii <eliz@is.elta.co.il>
 
 
 -------------------------------------------------------------------------------
-Copyright (C) 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.OS2.template

@@ -160,7 +160,7 @@ from the make source tree.
 
 
 -------------------------------------------------------------------------------
-Copyright (C) 2003-2012 Free Software Foundation, Inc.
+Copyright (C) 2003-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.VMS

@@ -1,23 +1,33 @@
-This is the VMS version of GNU Make, updated by Hartmut Becker
-
-Changes are based on GNU make 3.82.
-
-This version was built and tested on OpenVMS V7.3 (VAX), V7.3-2 (Alpha) and
-V8.3-1H1 (I64).
+This version of GNU make has been tested on
+OpenVMS V8.3 (Alpha) and V8.4 (Integrity).
 
 Build instructions
+------------------
 Make a 1st version
        $ @makefile.com  ! ignore any compiler and/or linker warning
-       $ rena make.exe 1st-make.exe
-Use the 1st version to generate a 2nd version
-       $ mc sys$disk:[]1st-make clean
+       $ copy make.exe 1st-make.exe
+  Use the 1st version to generate a 2nd version
+       $ mc sys$disk:[]1st-make clean  ! ignore any file not found messages
        $ mc sys$disk:[]1st-make
-Verify your 2nd version
-       $ rena make.exe 2nd-make.exe
+  Verify your 2nd version
+       $ copy make.exe 2nd-make.exe
        $ mc sys$disk:[]2nd-make clean
        $ mc sys$disk:[]2nd-make
+  Don't use the HP C V7.2-001 compiler, which has an incompatible change
+  how __STDC__ is defined. This results at least in compile time warnings.
+
+Changes since GNU make 3.82
+---------------------------
 
-Changes (3.81.90)
+Fix build problems.
+
+The new feature "Loadable objects" is not yet supported. If you need it,
+please send a change request or submit a bug report.
+
+The new option --output-sync (-O) is accepted but has no effect: GNU make
+for VMS does not support running multiple commands simultaneously.
+
+Changes for GNU make 3.82
 
 Michael Gehre (at VISTEC-SEMI dot COM) supplied a fix for a problem with
 timestamps of object modules in OLBs. The timestamps were not correctly
@@ -34,30 +44,6 @@ systems.
 
 Build fixes for const-ified code in VMS specific sources.
 
-Build notes:
-- Try to avoid HP C V7.2-001, which has an incompatible change
-how __STDC__ is defined. This results at least in compile time warnings.
-
-- On V8.3-1H1, if you press Ctrl+C you may see a traceback, starting with
-%SYSTEM-F-CONTROLC, operation completed under CTRL/C
-%TRACE-F-TRACEBACK, symbolic stack dump follows
-image     module    routine               line      rel PC           abs PC
-
-DECC$SHR  C$SIGNAL  gsignal              27991 0000000000001180
-FFFFFFFF84AB2DA0
-DECC$SHR  C$SIGNAL  raise                28048 0000000000001280
-FFFFFFFF84AB2EA0
-DECC$SHR  C$SIGPENDING  decc$$deliver_signals
-                                         12475 0000000000000890
-FFFFFFFF84C13690
-...
-This looks like an incompatibility to the Alpha and VAX behavior, so it looks
-like a problem in I64 VMS version(s).
-
-- There is no clean build on VAX. In the environment I tested, I had to use GNU
-make's alloca which produced a couple of compile time warnings. It seems too
-much effort to work on a clean build on VAX.
-
 A note on appending the redirected output. With this change, a simple mechanism
 is implemented to make ">>" work in action lines. In VMS there is no simple
 feature like ">>" to have DCL command or program output redirected and appended
@@ -78,117 +64,24 @@ happens. Pressing Ctrl+Y to abort make is one case. In case of Ctrl+Y the
 associated command procedure is left in SYS$SCRATCH as well. Its name is
 CMDxxxxx.COM.
 
-Change in the Ctrl+Y handling
+Change in the Ctrl+Y handling. The CtrlY handler now uses $delprc to delete all
+children. This way also actions with DCL commands will be stopped. As before
+the CtrlY handler then sends SIGQUIT to itself, which is handled in common
+code.
 
-Ctrl+Y was: The CtrlY handler called $forcex for the current child.
-
-Ctrl+Y changed: The CtrlY handler uses $delprc to delete all children. This way
-also actions with DCL commands will be stopped. As before Ctrl+Y then sends
-SIGQUIT to itself, which is handled in common code.
-
-Change in deleteing temporary command files
-
-Temporary command files were deleted in the main line, after returning from the
-vms child termination handler. If Ctrl+C was pressed, the handler is called but
-did not return to main line.
-
-Now, temporary command files are deleted in the vms child termination
-handler. That deletes the them even if a Ctrl+C was pressed.
+Change in deleteing temporary command files. Temporary command files are now
+deleted in the vms child termination handler. That deletes them even if
+a Ctrl+C was pressed.
 
 The behavior of pressing Ctrl+C is not changed. It still has only an effect,
 after the current action is terminated. If that doesn't happen or takes too
 long, Ctrl+Y should be used instead.
 
-Changes (3.80)
+Changes for GNU make 3.80
 
 . In default.c define variable ARCH as IA64 for VMS on Itanium systems.
 
 . In makefile.vms avoid name collision for glob and globfree.
-
-In newer version of the VMS CRTL there are glob and globfree implemented.
-Compiling and linking may result in
-
-  %ILINK-W-MULDEFLNKG, symbol DECC$GLOBFREE has subsequent linkage definition
-       in module DECC$SHR file SYS$COMMON:[SYSLIB]DECC$SHR.EXE;1
-  %ILINK-W-MULDEF, symbol DECC$GLOBFREE multiply defined
-       in module DECC$SHR file SYS$COMMON:[SYSLIB]DECC$SHR.EXE;1
-
-linker messages (and similar for DECC$GLOB). The messages just say, that
-globfree is a known CRTL whose name was mapped by the compiler to
-DECC$GLOBFREE.  This is done in glob.c as well, so this name is defined
-twice. One possible solution is to use the VMS versions of glob and
-globfree. However, then the build environment needs to figure out if
-there is a new CRTL supporting these or not. This adds complexity. Even
-more, these functions return VMS file specifications, which is not
-expected by the other make sources. There is a switch at run time (a VMS
-logical DECC$GLOB_UNIX_STYLE), which can be set to get Unix style
-names. This may conflict with other software. The recommended solution
-for this is to set this switch just prior to calling main: in an
-initialization routine. This adds more complexity and more VMS specific
-code. It is easier to tell the compiler NOT to map the routine names
-with a simple change in makefile.vms.
-
-Some notes on case sensitive names in rules and on the disk. In the VMS
-template for CONFIG.H case sensitive rules can be enabled with defining
-WANT_CASE_SENSITIVE_TARGETS. For recent version of VMS there is a case
-sensitive file system: ODS5. To make use of that, additionally un-defining
-the HAVE_CASE_INSENSITIVE_FS is required. As these are C macros, different
-versions of make need to be built to have any case sensitivity for VMS
-working. Unfortunately, for ODS5 disks that's not all.
-
-- Usually DCL upcases command line tokens (except strings) and usually the
-  file system is case blind (similar to how Windows systems work)
-	$ set proc/parse=extended/case=sensitive
-  preserves lower and UPPER on the command line and (for this process and all
-  sub-processes) enables case sensitivity in the file system
-
-- Usually the CRTL tries to reverse what DCL did with command line tokens, it
-  lowercases all tokens (except strings)
-	$ define DECC$ARGV_PARSE_STYLE enable
-  passes (the now preserved) lower and UPPER from the command line to main()
-
-- Usually the CRTL upcases the arguments to open() and friends
-	$ define DECC$EFS_CASE_PRESERVE enable
-  preserves the names as is.
-
-It is important to know that not all VMS tools are ready for case sensitivity.
-With this setup some tools may not work as expected. The setup should not
-blindly be applied for all users in default login procedures.
-
-Example? The poor coding gives a compiler message, showing that there are
-different files:
-
-$ dir
-
-Directory ODS5DISK[HB]
-
-A.c;1               B.c;1               c.c;1               X.c;1
-x.c;1
-
-Total of 5 files.
-$ ods5make x.obj
-cc    /obj=x.obj x.c
-
-foo(){lowercase_x();}
-......^
-%CC-I-IMPLICITFUNC, In this statement, the identifier "lowercase_x" is implicitly declared as a function.
-at line number 1 in file ODS5DISK[HB]x.c;1
-$ mc SYS$SYSDEVICE:[HARTMUT.MAKE_3_80P]ods5make X.obj
-cc    /obj=X.obj X.c
-
-foo() {UPPERCASE_X();}
-.......^
-%CC-I-IMPLICITFUNC, In this statement, the identifier "UPPERCASE_X" is implicitly declared as a function.
-at line number 1 in file ODS5DISK[HB]X.c;1
-$ dir
-
-Directory ODS5DISK[HB]
-
-A.c;1               B.c;1               c.c;1               X.c;1
-x.c;1               X.obj;1             x.obj;1
-
-Total of 7 files.
-$
 
 This is the VMS port of GNU Make done by Hartmut.Becker@compaq.com.
 
@@ -353,7 +246,7 @@ replaced it with a hack in vmsfunctions.c. I will provide a full rewrite
 somewhere in the future. Be warned, the time resolution inside make is
 less than what vms provides. This might be a problem on the faster Alphas.
 
-You can use a : in a filename only if you preceed it with a backslash ('\').
+You can use a : in a filename only if you precede it with a backslash ('\').
 E.g.- hobbes\:[bogas.files]
 
 Make ignores success, informational, or warning errors (-S-, -I-, or
@@ -375,7 +268,7 @@ Long command lines are now converted to command files.
 Comma (',') as a separator is now allowed. See makefile.vms for an example.
 
 -------------------------------------------------------------------------------
-Copyright (C) 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.W32.template

@@ -7,7 +7,7 @@ It builds with the MinGW port of GCC (tested with GCC 3.4.2).
 It also builds with MSVC 2.x, 4.x, 5.x, 6.x, and 2003 as well as
 with .NET 7.x and .NET 2003.
 
-As of version 3.83, a build with Guile is supported (tested with Guile
+As of version 4.0, a build with Guile is supported (tested with Guile
 2.0.3).  To build with Guile, you will need, in addition to Guile
 itself, its dependency libraries and the pkg-config program.  The
 latter is used to figure out which compilation and link switches and
@@ -55,7 +55,7 @@ Building with (MinGW-)GCC using build_w32.bat
  2. Open a W32 command prompt for your installed (MinGW-)GCC, setup a
     correct PATH and other environment variables for it, then execute ...
 
-	build_w32.bat gcc
+        build_w32.bat gcc
 
     This produces gnumake.exe in the current directory.
 
@@ -75,13 +75,13 @@ Building with (MSVC++-)cl using build_w32.bat or NMakefile
     e.g. "%VS71COMNTOOLS%vsvars32.bat"; or using a corresponding start
     menue entry from the cl-installation), then execute EITHER ...
 
-	build_w32.bat
+        build_w32.bat
 
     (this produces WinDebug/gnumake.exe and WinRel/gnumake.exe)
 
     ... OR ...
 
-	nmake /f NMakefile
+        nmake /f NMakefile
 
     (this produces WinDebug/make.exe and WinRel/make.exe).
 
@@ -97,203 +97,203 @@ Building with (MSVC++-)cl using build_w32.bat or NMakefile
 
 GNU make on Windows 32-bit platforms:
 
-	This version of make is ported natively to Windows32 platforms
-	(Windows NT 3.51, Windows NT 4.0, Windows 2000, Windows XP,
-	Windows 95, and Windows 98). It does not rely on any 3rd party
-	software or add-on packages for building. The only thing
-	needed is a Windows compiler.  Two compilers supported
-	officially are the MinGW port of GNU GCC, and the various
-	versions of the Microsoft C compiler.
+        This version of make is ported natively to Windows32 platforms
+        (Windows NT 3.51, Windows NT 4.0, Windows 2000, Windows XP,
+        Windows 95, and Windows 98). It does not rely on any 3rd party
+        software or add-on packages for building. The only thing
+        needed is a Windows compiler.  Two compilers supported
+        officially are the MinGW port of GNU GCC, and the various
+        versions of the Microsoft C compiler.
 
-	Do not confuse this port of GNU make with other Windows32 projects
-	which provide a GNU make binary. These are separate projects
-	and are not connected to this port effort.
+        Do not confuse this port of GNU make with other Windows32 projects
+        which provide a GNU make binary. These are separate projects
+        and are not connected to this port effort.
 
 GNU make and sh.exe:
 
-	This port prefers if you have a working sh.exe somewhere on
-	your system. If you don't have sh.exe, the port falls back to
-	MSDOS mode for launching programs (via a batch file).  The
-	MSDOS mode style execution has not been tested that carefully
-	though (The author uses GNU bash as sh.exe).
+        This port prefers if you have a working sh.exe somewhere on
+        your system. If you don't have sh.exe, the port falls back to
+        MSDOS mode for launching programs (via a batch file).  The
+        MSDOS mode style execution has not been tested that carefully
+        though (The author uses GNU bash as sh.exe).
 
-	There are very few true ports of Bourne shell for NT right now.
-	There is a version of GNU bash available from Cygnus "Cygwin"
-	porting effort (http://www.cygwin.com/).
-	Other possibilities are the MKS version of sh.exe, or building
+        There are very few true ports of Bourne shell for NT right now.
+        There is a version of GNU bash available from Cygnus "Cygwin"
+        porting effort (http://www.cygwin.com/).
+        Other possibilities are the MKS version of sh.exe, or building
         your own with a package like NutCracker (DataFocus) or Portage
         (Consensys).  Also MinGW includes sh (http://mingw.org/).
 
 GNU make and brain-dead shells (BATCH_MODE_ONLY_SHELL):
 
-	Some versions of Bourne shell do not behave well when invoked
-	as 'sh -c' from CreateProcess().  The main problem is they seem
-	to have a hard time handling quoted strings correctly. This can
-	be circumvented by writing commands to be executed to a batch
-	file and then executing the command by calling 'sh file'.
+        Some versions of Bourne shell do not behave well when invoked
+        as 'sh -c' from CreateProcess().  The main problem is they seem
+        to have a hard time handling quoted strings correctly. This can
+        be circumvented by writing commands to be executed to a batch
+        file and then executing the command by calling 'sh file'.
 
-	To work around this difficulty, this version of make supports
-	a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
-	time, make forces all command lines to be executed via script
-	files instead of by command line.  In this mode you must have a
-	working sh.exe in order to use parallel builds (-j).
+        To work around this difficulty, this version of make supports
+        a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
+        time, make forces all command lines to be executed via script
+        files instead of by command line.  In this mode you must have a
+        working sh.exe in order to use parallel builds (-j).
 
-	A native Windows32 system with no Bourne shell will also run
-	in batch mode.  All command lines will be put into batch files
-	and executed via $(COMSPEC) (%COMSPEC%).  However, parallel
-	builds ARE supported with Windows shells (cmd.exe and
-	command.com).  See the next section about some peculiarities
-	of parallel builds on Windows.
+        A native Windows32 system with no Bourne shell will also run
+        in batch mode.  All command lines will be put into batch files
+        and executed via $(COMSPEC) (%COMSPEC%).  However, parallel
+        builds ARE supported with Windows shells (cmd.exe and
+        command.com).  See the next section about some peculiarities
+        of parallel builds on Windows.
 
 Support for parallel builds
 
-	Parallel builds (-jN) are supported in this port, with 1
-	limitation: The number of concurrent processes has a hard
-	limit of 64, due to the way this port implements waiting for
-	its subprocesses.
+        Parallel builds (-jN) are supported in this port, with 1
+        limitation: The number of concurrent processes has a hard
+        limit of 64, due to the way this port implements waiting for
+        its subprocesses.
 
 GNU make and Cygnus GNU Windows32 tools:
 
-	Good news! Make now has native support for Cygwin sh. To enable,
-	define the HAVE_CYGWIN_SHELL in config.h and rebuild make
-	from scratch. This version of make tested with B20.1 of Cygwin.
-	Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.
+        Good news! Make now has native support for Cygwin sh. To enable,
+        define the HAVE_CYGWIN_SHELL in config.h and rebuild make
+        from scratch. This version of make tested with B20.1 of Cygwin.
+        Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.
 
 GNU make and the MKS shell:
 
-	There is now semi-official support for the MKS shell. To turn this
-	support on, define HAVE_MKS_SHELL in the config.h.W32 before you
-	build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
-	on HAVE_MKS_SHELL.
+        There is now semi-official support for the MKS shell. To turn this
+        support on, define HAVE_MKS_SHELL in the config.h.W32 before you
+        build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
+        on HAVE_MKS_SHELL.
 
 GNU make handling of drive letters in pathnames (PATH, vpath, VPATH):
 
-	There is a caveat that should be noted with respect to handling
-	single character pathnames on Windows systems.	When colon is
-	used in PATH variables, make tries to be smart about knowing when
-	you are using colon as a separator versus colon as a drive
-	letter.	 Unfortunately, something as simple as the string 'x:/'
-	could be interpreted 2 ways: (x and /) or (x:/).
+        There is a caveat that should be noted with respect to handling
+        single character pathnames on Windows systems.  When colon is
+        used in PATH variables, make tries to be smart about knowing when
+        you are using colon as a separator versus colon as a drive
+        letter.  Unfortunately, something as simple as the string 'x:/'
+        could be interpreted 2 ways: (x and /) or (x:/).
 
-	Make chooses to interpret a letter plus colon (e.g. x:/) as a
-	drive letter pathname.	If it is necessary to use single
-	character directories in paths (VPATH, vpath, Path, PATH), the
-	user must do one of two things:
+        Make chooses to interpret a letter plus colon (e.g. x:/) as a
+        drive letter pathname.  If it is necessary to use single
+        character directories in paths (VPATH, vpath, Path, PATH), the
+        user must do one of two things:
 
-	 a. Use semicolon as the separator to disambiguate colon. For
-	    example use 'x;/' if you want to say 'x' and '/' are
-	    separate components.
+         a. Use semicolon as the separator to disambiguate colon. For
+            example use 'x;/' if you want to say 'x' and '/' are
+            separate components.
 
-	 b. Qualify the directory name so that there is more than
-	    one character in the path(s) used. For example, none
-	    of these settings are ambiguous:
+         b. Qualify the directory name so that there is more than
+            one character in the path(s) used. For example, none
+            of these settings are ambiguous:
 
-	      ./x:./y
-	      /some/path/x:/some/path/y
-	      x:/some/path/x:x:/some/path/y
+              ./x:./y
+              /some/path/x:/some/path/y
+              x:/some/path/x:x:/some/path/y
 
-	Please note that you are free to mix colon and semi-colon in the
-	specification of paths.	 Make is able to figure out the intended
-	result and convert the paths internally to the format needed
-	when interacting with the operating system, providing the path
-	is not within quotes, e.g. "x:/test/test.c".
+        Please note that you are free to mix colon and semi-colon in the
+        specification of paths.  Make is able to figure out the intended
+        result and convert the paths internally to the format needed
+        when interacting with the operating system, providing the path
+        is not within quotes, e.g. "x:/test/test.c".
 
-	You are encouraged to use colon as the separator character.
-	This should ease the pain of deciding how to handle various path
-	problems which exist between platforms.	 If colon is used on
-	both Unix and Windows systems, then no ifdef'ing will be
-	necessary in the makefile source.
+        You are encouraged to use colon as the separator character.
+        This should ease the pain of deciding how to handle various path
+        problems which exist between platforms.  If colon is used on
+        both Unix and Windows systems, then no ifdef'ing will be
+        necessary in the makefile source.
 
 GNU make test suite:
 
-	I verified all functionality with a slightly modified version
-	of make-test-%VERSION% (modifications to get test suite to run
-	on Windows NT). All tests pass in an environment that includes
-	sh.exe.  Tests were performed on both Windows NT and Windows 95.
+        I verified all functionality with a slightly modified version
+        of make-test-%VERSION% (modifications to get test suite to run
+        on Windows NT). All tests pass in an environment that includes
+        sh.exe.  Tests were performed on both Windows NT and Windows 95.
 
 Pathnames and white space:
 
-	Unlike Unix, Windows 95/NT systems encourage pathnames which
-	contain white space (e.g. C:\Program Files\). These sorts of
-	pathnames are valid on Unix too, but are never encouraged.
-	There is at least one place in make (VPATH/vpath handling) where
-	paths containing white space will simply not work. There may be
-	others too. I chose to not try and port make in such a way so
-	that these sorts of paths could be handled. I offer these
-	suggestions as workarounds:
+        Unlike Unix, Windows 95/NT systems encourage pathnames which
+        contain white space (e.g. C:\Program Files\). These sorts of
+        pathnames are valid on Unix too, but are never encouraged.
+        There is at least one place in make (VPATH/vpath handling) where
+        paths containing white space will simply not work. There may be
+        others too. I chose to not try and port make in such a way so
+        that these sorts of paths could be handled. I offer these
+        suggestions as workarounds:
 
-		1. Use 8.3 notation. i.e. "x:/long~1/", which is actually
-		   "x:\longpathtest".  Type "dir /x" to view these filenames
-		   within the cmd.exe shell.
-		2. Rename the directory so it does not contain white space.
+                1. Use 8.3 notation. i.e. "x:/long~1/", which is actually
+                   "x:\longpathtest".  Type "dir /x" to view these filenames
+                   within the cmd.exe shell.
+                2. Rename the directory so it does not contain white space.
 
-	If you are unhappy with this choice, this is free software
-	and you are free to take a crack at making this work. The code
-	in w32/pathstuff.c and vpath.c would be the places to start.
+        If you are unhappy with this choice, this is free software
+        and you are free to take a crack at making this work. The code
+        in w32/pathstuff.c and vpath.c would be the places to start.
 
 Pathnames and Case insensitivity:
 
-	Unlike Unix, Windows 95/NT systems are case insensitive but case
-	preserving.  For example if you tell the file system to create a
-	file named "Target", it will preserve the case.  Subsequent access to
-	the file with other case permutations will succeed (i.e. opening a
-	file named "target" or "TARGET" will open the file "Target").
+        Unlike Unix, Windows 95/NT systems are case insensitive but case
+        preserving.  For example if you tell the file system to create a
+        file named "Target", it will preserve the case.  Subsequent access to
+        the file with other case permutations will succeed (i.e. opening a
+        file named "target" or "TARGET" will open the file "Target").
 
-	By default, GNU make retains its case sensitivity when comparing
-	target names and existing files or directories.  It can be
-	configured, however, into a case preserving and case insensitive
-	mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
-	config.h.W32.
+        By default, GNU make retains its case sensitivity when comparing
+        target names and existing files or directories.  It can be
+        configured, however, into a case preserving and case insensitive
+        mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
+        config.h.W32.
 
-	For example, the following makefile will create a file named
-	Target in the directory subdir which will subsequently be used
-	to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
-	Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
-	will not be made:
+        For example, the following makefile will create a file named
+        Target in the directory subdir which will subsequently be used
+        to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
+        Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
+        will not be made:
 
-	subdir/Target:
-		touch $@
+        subdir/Target:
+                touch $@
 
-	SUBDIR/DepTarget: SubDir/TARGET
-		cp $^ $@
+        SUBDIR/DepTarget: SubDir/TARGET
+                cp $^ $@
 
-	Reliance on this behavior also eliminates the ability of GNU make
-	to use case in comparison of matching rules.  For example, it is
-	not possible to set up a C++ rule using %.C that is different
-	than a C rule using %.c.  GNU make will consider these to be the
-	same rule and will issue a warning.
+        Reliance on this behavior also eliminates the ability of GNU make
+        to use case in comparison of matching rules.  For example, it is
+        not possible to set up a C++ rule using %.C that is different
+        than a C rule using %.c.  GNU make will consider these to be the
+        same rule and will issue a warning.
 
 SAMBA/NTFS/VFAT:
 
-	I have not had any success building the debug version of this
-	package using SAMBA as my file server. The reason seems to be
-	related to the way VC++ 4.0 changes the case name of the pdb
-	filename it is passed on the command line. It seems to change
-	the name always to to lower case. I contend that the VC++
-	compiler should not change the casename of files that are passed
-	as arguments on the command line. I don't think this was a
-	problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.
+        I have not had any success building the debug version of this
+        package using SAMBA as my file server. The reason seems to be
+        related to the way VC++ 4.0 changes the case name of the pdb
+        filename it is passed on the command line. It seems to change
+        the name always to to lower case. I contend that the VC++
+        compiler should not change the casename of files that are passed
+        as arguments on the command line. I don't think this was a
+        problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.
 
-	The package builds fine on VFAT and NTFS filesystems.
+        The package builds fine on VFAT and NTFS filesystems.
 
-	Most all of the development I have done to date has been using
-	NTFS and long file names. I have not done any considerable work
-	under VFAT. VFAT users may wish to be aware that this port of
-	make does respect case sensitivity.
+        Most all of the development I have done to date has been using
+        NTFS and long file names. I have not done any considerable work
+        under VFAT. VFAT users may wish to be aware that this port of
+        make does respect case sensitivity.
 
 FAT:
 
-	Version 3.76 added support for FAT filesystems. Make works
-	around some difficulties with stat'ing of files and caching of
-	filenames and directories internally.
+        Version 3.76 added support for FAT filesystems. Make works
+        around some difficulties with stat'ing of files and caching of
+        filenames and directories internally.
 
 Bug reports:
 
-	Please submit bugs via the normal bug reporting mechanism which
-	is described in the GNU make manual and the base README.
+        Please submit bugs via the normal bug reporting mechanism which
+        is described in the GNU make manual and the base README.
 
 -------------------------------------------------------------------------------
-Copyright (C) 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.customs

@@ -96,7 +96,7 @@ SunOS 4.1.x:
 
 
 -------------------------------------------------------------------------------
-Copyright (C) 1998-2012 Free Software Foundation, Inc.
+Copyright (C) 1998-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

README.cvs

@@ -1,219 +0,0 @@
-                                                                     -*-text-*-
-
--------------------------------------------------------------------------------
-Copyright (C) 2002-2012 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software
-Foundation; either version 3 of the License, or (at your option) any later
-version.
-
-GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------
-
-Obtaining CVS Code
-------------------
-
-This seems redundant, since if you're reading this you most likely have
-already performed this step; however, for completeness, you can obtain
-the GNU make source code via anonymous CVS from the FSF's Savannah
-project <http://savannah.gnu.org/projects/make/>:
-
-  $ cvs -d:pserver:anoncvs@cvs.savannah.gnu.org:/sources/make co make
-
-You might want to use the "-z3" option to get compression, and you most
-certainly will want the -P option to avoid unneeded directories
-cluttering up your source.  Personally I add these (as well as -dP for
-update) to my ~/.cvsrc file.
-
-
-If you have an older version of CVS, you might have to login first.
-There is no password; just hit the ENTER key if you are asked for one.
-
-
-Building From CVS
------------------
-
-To build GNU make from CVS, you will need Autoconf, Automake, and
-Gettext, and any tools that those utilities require (GNU m4, Perl,
-etc.).  See the configure.in file to find the minimum versions of each
-of these tools.  You will also need a copy of wget.
-
-When building from CVS you must build in the source directory: "VPATH
-builds" from remote directories are not supported.  Once you've created
-a distribution, of course, you can unpack it and do a VPATH build from
-there.
-
-After checking out the code, you will need to perform these steps to get
-to the point where you can run "make".
-
-
- 1) $ autoreconf -i
-
-    This rebuilds all the things that need rebuilding, installing
-    missing files as symbolic links.
-
-    You may get warnings here about missing files like README, etc.
-    Ignore them, they are harmless.
-
-
- 2) $ ./configure
-
-    Generate a Makefile
-
-
- 3) $ make update
-
-    Use wget to retrieve various other files that GNU make relies on,
-    but does not keep in its own source tree.
-
-    NB: You may need GNU make to correctly perform this step; if you use
-    a platform-local make you may get problems with missing files in doc/.
-
-
-At this point you have successfully brought your CVS copy of the GNU
-make source directory up to the point where it can be treated
-more-or-less like the official package you would get from ftp.gnu.org.
-That is, you can just run:
-
-  $ make && make check && make install
-
-to build and install GNU make.
-
-
-Windows builds from CVS
------------------------
-
-If you have a UNIX emulation like CYGWIN you can opt to run the general
-build procedure above; it will work.  Be sure to read
-README.W32.template for information on options you might want to use
-when running ./configure.
-
-If you can't or don't want to do that, then rename the file
-README.W32.template to README.W32 and follow those instructions.
-
-
-Creating a Package
-------------------
-
-Once you have performed the above steps (including the configuration and
-build) you can create a GNU make package.  This is very simple, just
-run:
-
-  $ make dist-gzip
-
-and, if you like:
-
-  $ make dist-bzip2
-
-Even better, you should run this:
-
-  $ make distcheck
-
-Which will build both .gz and .bz2 package files, then unpack them into
-a temporary location, try to build them, and repack them, verifying that
-everything works, you get the same results, _and_ no extraneous files
-are left over after the "distclean" rule--whew!!  Now, _that_ is why
-converting to Automake is worth the trouble!  A big "huzzah!" to Tom
-T. and the AutoToolers!
-
-
-Steps to Release
-----------------
-
-Here are the things that need to be done (in more or less this order)
-before making an official release:
-
-  * Update the configure.in file with the new release number.
-  * Update the NEWS file with the release number and date.
-  * Create the new release in the Savannah "Bugs" Administration for
-    both the "Component Version" and "Fixed Release" fields.
-  * Create the new release in the Savannah "Patches" Administration for
-    the "Fixed Release" field.
-  * Update the Savannah bug list URL in the NEWS file to use the correct
-    "Fixed Release" ID number.
-  * Run "make distcheck" to be sure it all works.
-  * Commit everything.
-  * cvs tag <RTAG> where RTAG is constructed by replacing each "." in
-    the version with "-" and prefixing it with "make-".
-
-
-Publishing a Package
---------------------
-
-In order to publish a package on the FSF FTP site, either the release
-site ftp://ftp.gnu.org, or the prerelease site ftp://alpha.gnu.org, you
-first need to have my GPG private key and my passphrase to unlock it.
-And, you can't have them!  So there!  But, just so I remember here's
-what you do:
-
-  Make sure the "Steps to Release" are complete and committed and tagged.
-
-  cvs -d :pserver:anonymous@cvs.savannah.gnu.org:/sources/make \
-     export -r<RTAG> -d make-release make
-
-  cd make-release
-
-  <run the commands above to build the release>
-
-  make upload-alpha             # for alpha.gnu.org (pre-releases)
-       -OR-
-  make upload-ftp               # for ftp.gnu.org (official releases)
-
-It will ask for the GPG passphrase _THREE_ times.  Sigh.
-
-
-For both final releases and pre-releases, send an email with the URL of
-the package to the GNU translation robot to allow the translators to
-work on it:
-
-     <translation@iro.umontreal.ca>
-
-
-Where to Announce
------------------
-
-Create the announcement in a text file, then sign it with GPG.
-
-  gpg --clearsign <announcement.txt>
-
-Upload to gnu.org, then login and send from my account there.
-
-Email to: make-alpha@gnu.org, bug-make@gnu.org, help-make@gnu.org, make-w32@gnu.org.
-Email to: info-gnu@gnu.org
-
-Add a news item to the Savannah project site.
-
-Add an update to freshmeat.net.
-
-
-Appendix A - For The Brave
---------------------------
-
-For those of you who trust me implicitly, or are just brave (or
-foolhardy), here is a canned sequence of commands to build a GNU make
-distribution package from a virgin CVS source checkout (assuming all the
-prerequisites are available of course).
-
-This list is eminently suitable for a quick swipe o' the mouse and a
-swift click o' mouse-2 into an xterm.  Go for it!
-
-autoreconf -i
-./configure
-make update
-make
-make check
-
-Or, for a debugging version:
-
-autoreconf -i && ./configure CFLAGS=-g && make update && make && make check
-
-Or, all-in-one:
-
-autoreconf -i && ./configure && make update && make && make check

README.git

@@ -0,0 +1,289 @@
+                                                                     -*-text-*-
+
+-------------------------------------------------------------------------------
+Copyright (C) 2002-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
+-------------------------------------------------------------------------------
+
+Obtaining Git Code
+------------------
+
+This seems redundant, since if you're reading this you most likely have
+already performed this step; however, for completeness, you can obtain the GNU
+make source code via Git from the FSF's Savannah project
+<http://savannah.gnu.org/projects/make/>:
+
+  $ git clone git://git.savannah.gnu.org/make.git
+
+
+Changes using Git
+-----------------
+
+For non-developers, you can continue to provide patches as before, or if you
+make a public repository I can pull from that if you prefer.
+
+Starting with GNU make 4.0 we no longer keep a separate ChangeLog file in
+source control.  We use the Gnulib git-to-changelog conversion script to
+convert the Git comments into ChangeLog-style entries for release.  As a
+result, please format your Git comments carefully so they will look clean
+after conversion.  In particular, each line of your comment will have a TAB
+added before it so be sure your comment lines are not longer than 72
+characters; prefer 70 or less.  Please use standard ChangeLog formats for
+your commit messages (sans the leading TAB of course).
+
+Rule #1: Don't rewrite pushed history (don't use "git push --force").
+
+Typical simple workflow might be:
+
+  * Edit files
+  * Use "git status" and "git diff" to verify your changes
+  * Use "git add" to stage the changes you want to make
+  * Use "git commit" to commit the staged changes to your local repository
+  * Use "git pull" to accept & merge new changes from the Savannah repository
+  * Use "git push" to push your commits back to the Savannah repository
+
+For Emacs users, there are many options for Git integration but I strongly
+recommend the Magit package: http://www.emacswiki.org/emacs/Magit
+It makes the workflow much clearer, and has advanced features such as
+constructing multiple commits from various files and even from different
+diff chunks in the same file.  There is a video available which helps a lot.
+
+
+Coding Standards
+----------------
+
+GNU make code adheres to the GNU Coding Standards.  Please use only spaces and
+no TAB characters in source code.
+
+Additionally, GNU make is a foundational bootstrap package for the GNU
+project; as such it is very conservative about language features it expects.
+It should build with any C compiler conforming to the ANSI C89 / ISO C90
+standard.
+
+
+Building From Git
+-----------------
+
+To build GNU make from Git, you will need Autoconf, Automake, and
+Gettext, and any tools that those utilities require (GNU m4, Perl,
+etc.).  See the configure.ac file to find the minimum versions of each
+of these tools.  You will also need a copy of wget and gnulib.
+
+When building from Git you must build in the source directory: "VPATH
+builds" from remote directories are not supported.  Once you've created
+a distribution, of course, you can unpack it and do a VPATH build from
+there.
+
+After checking out the code, you will need to perform these steps to get
+to the point where you can run "make".
+
+ 1) $ autoreconf -i
+
+    This rebuilds all the things that need rebuilding, installing
+    missing files as symbolic links.
+
+    You may get warnings here about missing files like README, etc.
+    Ignore them, they are harmless.
+
+ 2) $ ./configure
+
+    Generate a Makefile
+
+ 3) $ make update
+
+    Use wget to retrieve various other files that GNU make relies on,
+    but does not keep in its own source tree.
+
+    NB: You may need GNU make to correctly perform this step; if you use
+    a platform-local make you may get problems with missing files in doc/.
+
+At this point you have successfully brought your Git copy of the GNU
+make source directory up to the point where it can be treated
+more-or-less like the official package you would get from ftp.gnu.org.
+That is, you can just run:
+
+  $ make && make check && make install
+
+to build and install GNU make.
+
+
+Windows builds from Git
+-----------------------
+
+If you have a UNIX emulation like CYGWIN you can opt to run the general
+build procedure above; it will work.  Be sure to read
+README.W32.template for information on options you might want to use
+when running ./configure.
+
+If you can't or don't want to do that, then rename the file
+README.W32.template to README.W32 and follow those instructions.
+
+
+Creating a Package
+------------------
+
+Once you have performed the above steps (including the configuration and
+build) you can create a GNU make package.  This is very simple, just
+run:
+
+  $ make dist-gzip
+
+and, if you like:
+
+  $ make dist-bzip2
+
+Even better, you should run this:
+
+  $ make distcheck
+
+Which will build both .gz and .bz2 package files, then unpack them into
+a temporary location, try to build them, and repack them, verifying that
+everything works, you get the same results, _and_ no extraneous files
+are left over after the "distclean" rule--whew!!  Now, _that_ is why
+converting to Automake is worth the trouble!  A big "huzzah!" to Tom
+T. and the AutoToolers!
+
+
+Steps to Release
+----------------
+
+Here are the things that need to be done (in more or less this order)
+before making an official release.  If something breaks such that you need to
+change code, be sure to start over again sufficiently that everything is
+consistent (that's why we don't finalize the Git tag, etc. until the end).
+
+  * Update the configure.ac file with the new release number.
+  * Update the EDITION value in the doc/make.texi file.
+  * Update the NEWS file with the release number and date.
+  * Ensure the Savannah bug list URL in the NEWS file uses the correct
+    "Fixed Release" ID number.
+  * Run "make distcheck" to be sure it all works.
+  * Run "make check-alt-config" to be sure alternative configurations work
+  * Run "make update-makeweb" to get a copy of the GNU make web pages
+  * Run "make update-gnuweb" to get a copy of the GNU website boilerplate pages
+  * Update the web page boilerplate if necessary:
+      ../gnu-www/www/server/standards/patch-from-parent ../make-web/make.html \
+            ../gnu-www/www/server/standards/boilerplate.html
+  * Run "make gendocs" (requires gnulib) to generate the manual files for
+    the GNU make web pages.
+  * Follow the directions from gendocs for the web page repository
+  * run "make tag-release" to create a Git tag for the release
+  * Push everything:
+    git push --tags origin master
+
+Manage the Savannah project for GNU make:
+
+  >>> This is only for real releases, not release candidate builds <<<
+
+  * In Savannah modify the "Value", "Rank", and "Description" values for the
+    current "SCM" entry in both "Component Version" and "Fix Release" fields
+    to refer to the new release.  The "Rank" field should be 10 less than the
+    previous release so it orders properly.
+  * In Savannah create a new entry for the "Component Version" and "Fix
+    Release" fields:
+      - Value: SCM
+      - Rank:  20
+      - Descr: Fixed in Git; will be available in the next version of Make.
+
+Start the next release:
+
+  * Update configure.ac and add a ".90" to the release number.
+  * Update the NEWS file with a new section for the release / date.
+  * Update the Savannah URL for the bugs fixed in the NEWS section.
+
+
+Publishing a Package
+--------------------
+
+In order to publish a package on the FSF FTP site, either the release
+site ftp://ftp.gnu.org, or the prerelease site ftp://alpha.gnu.org, you
+first need to have my GPG private key and my passphrase to unlock it.
+And, you can't have them!  So there!  But, just so I remember here's
+what to do:
+
+  Make sure the "Steps to Release" are complete and committed and tagged.
+
+  git clone git://git.savannah.gnu.org/make.git make-release
+
+  cd make-release
+
+  <run the commands above to build the release>
+
+  make upload-alpha             # for alpha.gnu.org (pre-releases)
+       -OR-
+  make upload-ftp               # for ftp.gnu.org (official releases)
+
+Depending on your distribution (whether GnuPG is integrated with your keyring
+etc.) it will either pop up a window asking for your GPG key passphrase one
+time, or else it will use the CLI to ask for the GPG passphrase _THREE_ times.
+Sigh.
+
+
+For both final releases and pre-releases, send an email with the URL of
+the package to the GNU translation robot to allow the translators to
+work on it:
+
+     <coordinator@translationproject.org>
+
+
+Where to Announce
+-----------------
+
+Create the announcement in a text file, then sign it with GPG.
+
+  gpg --clearsign <announcement.txt>
+
+Or, use your mail client's PGP/GPG signing capabilities.
+
+Announce the release:
+
+  * For release candidate builds:
+    To:  bug-make@gnu.org
+    CC:  coordinator@translationproject.org
+    BCC: help-make@gnu.org, make-w32@gnu.org, make-alpha@gnu.org
+
+  * For release builds
+    To:  info-gnu@gnu.org, bug-make@gnu.org
+    CC:  coordinator@translationproject.org
+    BCC: help-make@gnu.org, make-w32@gnu.org, make-alpha@gnu.org
+
+    * Add a news item to the Savannah project site.
+    * Add an update to freecode.com (nee freshmeat.net)
+
+
+Appendix A - For The Brave
+--------------------------
+
+For those of you who trust me implicitly, or are just brave (or
+foolhardy), here is a canned sequence of commands to build a GNU make
+distribution package from a virgin Git source checkout (assuming all the
+prerequisites are available of course).
+
+This list is eminently suitable for a quick swipe o' the mouse and a
+swift click o' mouse-2 into an xterm.  Go for it!
+
+autoreconf -i
+./configure
+make update
+make
+make check
+
+Or, for a debugging version:
+
+autoreconf -i && ./configure CFLAGS=-g && make update && make && make check
+
+Or, all-in-one:
+
+autoreconf -i && ./configure && make update && make && make check

README.template

@@ -82,19 +82,19 @@ If you need help using GNU make, try these forums:
   news:gnu.utils.bug
 
 
-CVS Access
+Git Access
 ----------
 
-The GNU make source repository is available via anonymous CVS from the
-GNU Subversions CVS server; look here for details:
+The GNU make source repository is available via Git from the
+GNU Savannah Git server; look here for details:
 
-  http://savannah.gnu.org/cvs/?group=make
+  http://savannah.gnu.org/git/?group=make
 
-Please note: you won't be able to build GNU make from CVS without
+Please note: you won't be able to build GNU make from Git without
 installing appropriate maintainer's tools, such as GNU m4, automake,
-autoconf, Perl, GNU make, and GCC.  See the README.cvs file for hints on
+autoconf, Perl, GNU make, and GCC.  See the README.git file for hints on
 how to build GNU make once these tools are available.  We make no
-guarantees about the contents or quality of the latest code in the CVS
+guarantees about the contents or quality of the latest code in the Git
 repository: it is not unheard of for code that is known to be broken to
 be checked in.  Use at your own risk.
 
@@ -142,7 +142,7 @@ Ports
   - See README.customs for details on integrating GNU make with the
     Customs distributed build environment from the Pmake distribution.
 
-  - See readme.vms for details about GNU Make on OpenVMS.
+  - See README.VMS for details about GNU Make on OpenVMS.
 
   - See README.Amiga for details about GNU Make on AmigaDOS.
 
@@ -162,7 +162,7 @@ at the right README!
 
 
 -------------------------------------------------------------------------------
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

SMakefile.template

@@ -3,7 +3,7 @@
 # NOTE: If you have no 'make' program at all to process this makefile,
 # run 'build.sh' instead.
 #
-# Copyright (C) 1995-2012 Free Software Foundation, Inc.
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -128,7 +128,8 @@ CTAGS = ctags -w
 objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o   \
        rule.o implicit.o default.o variable.o expand.o function.o    \
        vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o   \
-       remote-$(REMOTE).o $(GLOB) $(GETOPT) $(ALLOCA) $(extras) $(guile)
+       output.o remote-$(REMOTE).o $(GLOB) $(GETOPT) $(ALLOCA)       \
+       $(extras) $(guile)
 
 srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
        $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
@@ -140,7 +141,8 @@ srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
        $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c           \
        $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)           \
        $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h            \
-       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
+       $(srcdir)job.h $(srcdir)makeint.h $(srcdir)rule.h             \
+       $(srcdir)output.c $(srcdir)output.h                           \
        $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
 
 

TODO.private

@@ -6,7 +6,7 @@ This list comes both from the authors and from users of GNU make.
 
 They are listed in no particular order!
 
-Also, I don't gaurantee that all of them will be ultimately deemed "good
+Also, I don't guarantee that all of them will be ultimately deemed "good
 ideas" and implemented.  These are just the ones that, at first blush,
 seem to have some merit (and that I can remember).
 
@@ -99,33 +99,9 @@ The Rest of the List
     you just can't figure it out.  The way variables are expanded now
     means this isn't 100% trivial, but it probably won't be hard.
 
- 8) Integration of Guile as an embedded scripting language.  This means:
-    allowing Guile functions to be declared in makefiles somehow, then
-    providing a syntax for invoking them.  At least one formulation of
-    that would have the function resolve to a string which would be
-    substituted in the makefile, kind of like $(shell ...) does now, but
-    using the embedded interpreter so there's no process forked of
-    course.  Obviously this is an optional add-on feature.
-
-    It could be more advanced than that, even, who knows?  Maybe make
-    could provide Guile functions that allow Guile scripts more direct
-    access to internal make structures, somehow.  This kind of thing
-    needs a lot of thought.
-
-    Also there's always the flip side: in some very fundamental ways
-    make isn't the best choice right now for a complex build tool.  It's
-    great for simple-to-medium tasks, but there are already other tools
-    available for the really tough situations.  Ask yourself,
-    realistically, how much work is worthwhile to add to make, given the
-    fundamentals you can't really overcome without significantly
-    affecting backward compatibility--and then why not use another tool
-    in the first place?
-
-    Something to think about.
-
 
 -------------------------------------------------------------------------------
-Copyright (C) 1997-2012 Free Software Foundation, Inc.
+Copyright (C) 1997-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

acinclude.m4

@@ -1,7 +1,7 @@
 dnl acinclude.m4 -- Extra macros needed for GNU make.
 dnl
 dnl Automake will incorporate this into its generated aclocal.m4.
-dnl Copyright (C) 1998-2012 Free Software Foundation, Inc.
+dnl Copyright (C) 1998-2014 Free Software Foundation, Inc.
 dnl This file is part of GNU Make.
 dnl
 dnl GNU Make is free software; you can redistribute it and/or modify it under

amiga.c

@@ -1,5 +1,5 @@
 /* Running commands on Amiga
-Copyright (C) 1995-2012 Free Software Foundation, Inc.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 #include "variable.h"
 #include "amiga.h"
 #include <assert.h>
@@ -24,7 +24,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #include <proto/dos.h>
 
 static const char Amiga_version[] = "$VER: Make 3.74.3 (12.05.96) \n"
-		    "Amiga Port by A. Digulla (digulla@home.lake.de)";
+                    "Amiga Port by A. Digulla (digulla@home.lake.de)";
 
 int
 MyExecute (char **argv)
@@ -36,53 +36,53 @@ MyExecute (char **argv)
 
     for (aptr=argv; *aptr; aptr++)
     {
-	len += strlen (*aptr) + 4;
+        len += strlen (*aptr) + 4;
     }
 
     buffer = AllocMem (len, MEMF_ANY);
 
     if (!buffer)
-      fatal (NILF, "MyExecute: Cannot allocate space for calling a command");
+      O (fatal, NILF, "MyExecute: Cannot allocate space for calling a command\n");
 
     ptr = buffer;
 
     for (aptr=argv; *aptr; aptr++)
     {
-	if (((*aptr)[0] == ';' && !(*aptr)[1]))
-	{
-	    *ptr ++ = '"';
-	    strcpy (ptr, *aptr);
-	    ptr += strlen (ptr);
-	    *ptr ++ = '"';
-	}
-	else if ((*aptr)[0] == '@' && (*aptr)[1] == '@' && !(*aptr)[2])
-	{
-	    *ptr ++ = '\n';
-	    continue;
-	}
-	else
-	{
-	    strcpy (ptr, *aptr);
-	    ptr += strlen (ptr);
-	}
-	*ptr ++ = ' ';
-	*ptr = 0;
+        if (((*aptr)[0] == ';' && !(*aptr)[1]))
+        {
+            *ptr ++ = '"';
+            strcpy (ptr, *aptr);
+            ptr += strlen (ptr);
+            *ptr ++ = '"';
+        }
+        else if ((*aptr)[0] == '@' && (*aptr)[1] == '@' && !(*aptr)[2])
+        {
+            *ptr ++ = '\n';
+            continue;
+        }
+        else
+        {
+            strcpy (ptr, *aptr);
+            ptr += strlen (ptr);
+        }
+        *ptr ++ = ' ';
+        *ptr = 0;
     }
 
     ptr[-1] = '\n';
 
     status = SystemTags (buffer,
-	SYS_UserShell, TRUE,
-	TAG_END);
+        SYS_UserShell, TRUE,
+        TAG_END);
 
     FreeMem (buffer, len);
 
-    if (SetSignal(0L,0L) & SIGBREAKF_CTRL_C)
-	status = 20;
+    if (SetSignal (0L,0L) & SIGBREAKF_CTRL_C)
+        status = 20;
 
     /* Warnings don't count */
     if (status == 5)
-	status = 0;
+        status = 0;
 
     return status;
 }
@@ -90,27 +90,27 @@ MyExecute (char **argv)
 char *
 wildcard_expansion (char *wc, char *o)
 {
-#   define PATH_SIZE	1024
+#   define PATH_SIZE    1024
     struct AnchorPath * apath;
 
     if ( (apath = AllocMem (sizeof (struct AnchorPath) + PATH_SIZE,
-	    MEMF_CLEAR))
-	)
+            MEMF_CLEAR))
+        )
     {
-	apath->ap_Strlen = PATH_SIZE;
+        apath->ap_Strlen = PATH_SIZE;
 
-	if (MatchFirst (wc, apath) == 0)
-	{
-	    do
-	    {
-		o = variable_buffer_output (o, apath->ap_Buf,
-			strlen (apath->ap_Buf));
-		o = variable_buffer_output (o, " ",1);
-	    } while (MatchNext (apath) == 0);
-	}
+        if (MatchFirst (wc, apath) == 0)
+        {
+            do
+            {
+                o = variable_buffer_output (o, apath->ap_Buf,
+                        strlen (apath->ap_Buf));
+                o = variable_buffer_output (o, " ",1);
+            } while (MatchNext (apath) == 0);
+        }
 
-	MatchEnd (apath);
-	FreeMem (apath, sizeof (struct AnchorPath) + PATH_SIZE);
+        MatchEnd (apath);
+        FreeMem (apath, sizeof (struct AnchorPath) + PATH_SIZE);
     }
 
     return o;

amiga.h

@@ -1,5 +1,5 @@
 /* Definitions for amiga specific things
-Copyright (C) 1995-2012 Free Software Foundation, Inc.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

ar.c

@@ -1,5 +1,5 @@
 /* Interface to 'ar' archives for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 
 This file is part of GNU Make.
 
@@ -15,9 +15,9 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
 
 #include "filedef.h"
 #include "dep.h"
@@ -43,7 +43,7 @@ ar_name (const char *name)
     return 0;
 
   if (p[1] == '(' && end[-1] == ')')
-    fatal (NILF, _("attempt to use unsupported feature: '%s'"), name);
+    OS (fatal, NILF, _("attempt to use unsupported feature: '%s'"), name);
 
   return 1;
 }
@@ -61,7 +61,7 @@ ar_parse_name (const char *name, char **arname_p, char **memname_p)
   *arname_p = xstrdup (name);
   p = strchr (*arname_p, '(');
   *(p++) = '\0';
-  p[strlen(p) - 1] = '\0';
+  p[strlen (p) - 1] = '\0';
   *memname_p = p;
 }
 
@@ -71,10 +71,10 @@ ar_parse_name (const char *name, char **arname_p, char **memname_p)
 /* ARGSUSED */
 static long int
 ar_member_date_1 (int desc UNUSED, const char *mem, int truncated,
-		  long int hdrpos UNUSED, long int datapos UNUSED,
+                  long int hdrpos UNUSED, long int datapos UNUSED,
                   long int size UNUSED, long int date,
                   int uid UNUSED, int gid UNUSED, int mode UNUSED,
-		  const void *name)
+                  const void *name)
 {
   return ar_name_equal (name, mem, truncated) ? date : 0;
 }
@@ -120,7 +120,7 @@ ar_member_date (const char *name)
 int
 ar_touch (const char *name)
 {
-  error (NILF, _("touch archive member is not available on VMS"));
+  O (error, NILF, _("touch archive member is not available on VMS"));
   return -1;
 }
 #else
@@ -144,24 +144,24 @@ ar_touch (const char *name)
   switch (ar_member_touch (arname, memname))
     {
     case -1:
-      error (NILF, _("touch: Archive '%s' does not exist"), arname);
+      OS (error, NILF, _("touch: Archive '%s' does not exist"), arname);
       break;
     case -2:
-      error (NILF, _("touch: '%s' is not a valid archive"), arname);
+      OS (error, NILF, _("touch: '%s' is not a valid archive"), arname);
       break;
     case -3:
       perror_with_name ("touch: ", arname);
       break;
     case 1:
-      error (NILF,
-             _("touch: Member '%s' does not exist in '%s'"), memname, arname);
+      OSS (error, NILF,
+           _("touch: Member '%s' does not exist in '%s'"), memname, arname);
       break;
     case 0:
       val = 0;
       break;
     default:
-      error (NILF,
-             _("touch: Bad return code from ar_member_touch on '%s'"), name);
+      OS (error, NILF,
+          _("touch: Bad return code from ar_member_touch on '%s'"), name);
     }
 
   free (arname);
@@ -172,10 +172,20 @@ ar_touch (const char *name)
 
 /* State of an 'ar_glob' run, passed to 'ar_glob_match'.  */
 
+/* On VMS, (object) modules in libraries do not have suffixes. That is, to
+   find a match for a pattern, the pattern must not have any suffix. So the
+   suffix of the pattern is saved and the pattern is stripped (ar_glob).
+   If there is a match and the match, which is a module name, is added to
+   the chain, the saved suffix is added back to construct a source filename
+   (ar_glob_match). */
+
 struct ar_glob_state
   {
     const char *arname;
     const char *pattern;
+#ifdef VMS
+    char *suffix;
+#endif
     unsigned int size;
     struct nameseq *chain;
     unsigned int n;
@@ -186,7 +196,7 @@ struct ar_glob_state
 
 static long int
 ar_glob_match (int desc UNUSED, const char *mem, int truncated UNUSED,
-	       long int hdrpos UNUSED, long int datapos UNUSED,
+               long int hdrpos UNUSED, long int datapos UNUSED,
                long int size UNUSED, long int date UNUSED, int uid UNUSED,
                int gid UNUSED, int mode UNUSED, const void *arg)
 {
@@ -196,7 +206,13 @@ ar_glob_match (int desc UNUSED, const char *mem, int truncated UNUSED,
     {
       /* We have a match.  Add it to the chain.  */
       struct nameseq *new = xcalloc (state->size);
-      new->name = strcache_add (concat (4, state->arname, "(", mem, ")"));
+#ifdef VMS
+      if (state->suffix)
+        new->name = strcache_add(
+            concat(5, state->arname, "(", mem, state->suffix, ")"));
+      else
+#endif
+        new->name = strcache_add(concat(4, state->arname, "(", mem, ")"));
       new->next = state->chain;
       state->chain = new;
       ++state->n;
@@ -218,21 +234,21 @@ glob_pattern_p (const char *pattern, int quote)
       {
       case '?':
       case '*':
-	return 1;
+        return 1;
 
       case '\\':
-	if (quote)
-	  ++p;
-	break;
+        if (quote)
+          ++p;
+        break;
 
       case '[':
-	opened = 1;
-	break;
+        opened = 1;
+        break;
 
       case ']':
-	if (opened)
-	  return 1;
-	break;
+        if (opened)
+          return 1;
+        break;
       }
 
   return 0;
@@ -248,7 +264,9 @@ ar_glob (const char *arname, const char *member_pattern, unsigned int size)
   struct nameseq *n;
   const char **names;
   unsigned int i;
-
+#ifdef VMS
+  char *vms_member_pattern;
+#endif
   if (! glob_pattern_p (member_pattern, 1))
     return 0;
 
@@ -256,11 +274,36 @@ ar_glob (const char *arname, const char *member_pattern, unsigned int size)
      ar_glob_match will accumulate them in STATE.chain.  */
   state.arname = arname;
   state.pattern = member_pattern;
+#ifdef VMS
+    {
+      /* In a copy of the pattern, find the suffix, save it and  remove it from
+         the pattern */
+      char *lastdot;
+      vms_member_pattern = xstrdup(member_pattern);
+      lastdot = strrchr(vms_member_pattern, '.');
+      state.suffix = lastdot;
+      if (lastdot)
+        {
+          state.suffix = xstrdup(lastdot);
+          *lastdot = 0;
+        }
+      state.pattern = vms_member_pattern;
+    }
+#endif
   state.size = size;
   state.chain = 0;
   state.n = 0;
   ar_scan (arname, ar_glob_match, &state);
 
+#ifdef VMS
+  /* Deallocate any duplicated string */
+  free(vms_member_pattern);
+  if (state.suffix)
+    {
+      free(state.suffix);
+    }
+#endif
+
   if (state.chain == 0)
     return 0;
 
@@ -282,4 +325,4 @@ ar_glob (const char *arname, const char *member_pattern, unsigned int size)
   return state.chain;
 }
 
-#endif	/* Not NO_ARCHIVES.  */
+#endif  /* Not NO_ARCHIVES.  */

build.template

@@ -2,7 +2,7 @@
 # Shell script to build GNU Make in the absence of any 'make' program.
 # @configure_input@
 
-# Copyright (C) 1993-2012 Free Software Foundation, Inc.
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -22,11 +22,11 @@
 
 srcdir='@srcdir@'
 CC='@CC@'
-CFLAGS='@CFLAGS@'
+CFLAGS='@CFLAGS@ @GUILE_CFLAGS@'
 CPPFLAGS='@CPPFLAGS@'
-LDFLAGS='@LDFLAGS@'
+LDFLAGS='@AM_LDFLAGS@ @LDFLAGS@'
 ALLOCA='@ALLOCA@'
-LOADLIBES='@LIBS@ @LIBINTL@'
+LOADLIBES='@LIBS@ @GUILE_LIBS@ @LIBINTL@'
 eval extras=\'@LIBOBJS@\'
 REMOTE='@REMOTE@'
 GLOBLIB='@GLOBLIB@'
@@ -46,7 +46,7 @@ includedir=${prefix}/include
 localedir=${prefix}/share/locale
 aliaspath=${localedir}${PATH_SEPARATOR}.
 
-defines="-DALIASPATH=\"${aliaspath}\" -DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\""' @DEFS@'
+defines="-DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\""' @DEFS@'
 
 # Exit as soon as any command fails.
 set -e

build_w32.bat

@@ -1,5 +1,5 @@
 @echo off
-rem Copyright (C) 1996-2012 Free Software Foundation, Inc.
+rem Copyright (C) 1996-2014 Free Software Foundation, Inc.
 rem This file is part of GNU Make.
 rem
 rem GNU Make is free software; you can redistribute it and/or modify it under
@@ -15,26 +15,52 @@ rem
 rem You should have received a copy of the GNU General Public License along
 rem with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-if exist config.h.W32 GoTo NotCVS
-sed -n "s/^AC_INIT(\[GNU make\],\[\([^]]\+\)\].*/s,%%VERSION%%,\1,g/p" configure.in > config.h.W32.sed
+if "%1" == "-h" GoTo Usage
+if "%1" == "--help" GoTo Usage
+if not exist config.h.W32.template GoTo NotSCM
+sed -n "s/^AC_INIT(\[GNU make\],\[\([^]]\+\)\].*/s,%%VERSION%%,\1,g/p" configure.ac > config.h.W32.sed
 echo s,%%PACKAGE%%,make,g >> config.h.W32.sed
 sed -f config.h.W32.sed config.h.W32.template > config.h.W32
-:NotCVS
-if not exist config.h copy config.h.W32 config.h
+echo static const char *const GUILE_module_defn = ^" \> gmk-default.h
+sed -e "s/;.*//" -e "/^[ \t]*$/d" -e "s/\"/\\\\\"/g" -e "s/$/ \\/" gmk-default.scm >> gmk-default.h
+echo ^";>> gmk-default.h
+:NotSCM
+copy config.h.W32 config.h
 
 rem Guile configuration
 set GUILECFLAGS=
 set GUILELIBS=
-set GUILESRC=
+set NOGUILE=
+set OPT=-O2
+set COMPILER=
 set PKGMSC=
+:ParseSW
+if "%1" == "--debug" GoTo SetOpt
 if "%1" == "--without-guile" GoTo NoGuile
-if "%2" == "--without-guile" GoTo NoGuile
+if "%1" == "gcc" GoTo SetCC
+if "%1" == "" GoTo ChkGuile
+:SetOpt
+set OPT=-O0
+shift
+GoTo ParseSW
+:NoGuile
+set NOGUILE=Y
+echo "Building without Guile"
+shift
+GoTo ParseSW
+:SetCC
+set COMPILER=gcc
+echo "Building with GCC"
+shift
+GoTo ParseSW
 rem Build with Guile is supported only on NT and later versions
+:ChkGuile
+if "%NOGUILE%" == "Y" GoTo GuileDone
 if not "%OS%" == "Windows_NT" GoTo NoGuile
 pkg-config --help > guile.tmp 2> NUL
 if ERRORLEVEL 1 GoTo NoPkgCfg
 echo "Checking for Guile 2.0"
-if not "%1" == "gcc" set PKGMSC=--msvc-syntax
+if not "%COMPILER%" == "gcc" set PKGMSC=--msvc-syntax
 pkg-config --cflags --short-errors "guile-2.0" > guile.tmp
 if not ERRORLEVEL 1 set /P GUILECFLAGS= < guile.tmp
 pkg-config --libs --static --short-errors %PKGMSC% "guile-2.0" > guile.tmp
@@ -47,24 +73,24 @@ pkg-config --libs --static --short-errors %PKGMSC% "guile-1.8" > guile.tmp
 if not ERRORLEVEL 1 set /P GUILELIBS= < guile.tmp
 if not "%GUILECFLAGS%" == "" GoTo GuileDone
 echo "No Guile found, building without Guile"
-GoTo NoGuile
+GoTo GuileDone
 :NoPkgCfg
 echo "pkg-config not found, building without Guile"
-:NoGuile
 :GuileDone
 if not "%GUILECFLAGS%" == "" echo "Guile found, building with Guile"
-if not "%GUILECFLAGS%" == "" set GUILESRC=guile.c
 if not "%GUILECFLAGS%" == "" set GUILECFLAGS=%GUILECFLAGS% -DHAVE_GUILE
-if "%1" == "--without-guile" shift
+if "%COMPILER%" == "gcc" if "%OPT%" == "-O0" echo "Building without compiler optimizations"
 cd w32\subproc
+echo.
 echo "Creating the subproc library"
-%ComSpec% /c build.bat %1
+%ComSpec% /c build.bat
 cd ..\..
 
 if exist link.dbg del link.dbg
 if exist link.rel del link.rel
-echo "Creating GNU Make for Windows 9X/NT/2K/XP"
-if "%1" == "gcc" GoTo GCCBuild
+echo.
+echo "Creating GNU Make for Windows 9X/NT/2K/XP/Vista/7/8"
+if "%COMPILER%" == "gcc" GoTo GCCBuild
 set make=gnumake
 echo on
 if not exist .\WinDebug\nul mkdir .\WinDebug
@@ -94,6 +120,8 @@ cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D
 echo WinDebug\getopt1.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c job.c
 echo WinDebug\job.obj >>link.dbg
+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c output.c
+echo WinDebug\output.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c read.c
 echo WinDebug\read.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c version.c
@@ -118,21 +146,26 @@ cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D
 echo WinDebug\vpath.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c implicit.c
 echo WinDebug\implicit.obj >>link.dbg
+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c loadapi.c
+echo WinDebug\loadapi.obj >>link.dbg
+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c load.c
+echo WinDebug\load.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\dirent.c
 echo WinDebug\dirent.obj >>link.dbg
+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\posixfcn.c
+echo WinDebug\posixfcn.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\glob.c
 echo WinDebug\glob.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\fnmatch.c
 echo WinDebug\fnmatch.obj >>link.dbg
 cl.exe /nologo /MT /W4 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\pathstuff.c
 echo WinDebug\pathstuff.obj >>link.dbg
-if "%GUILESRC%" == "" GoTo LinkDbg
-cl.exe /nologo /MT /W4 /GX /Zi /YX /Od %GUILECFLAGS%% /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c guile.c
+cl.exe /nologo /MT /W4 /GX /Zi /YX /Od %GUILECFLAGS% /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c guile.c
 echo WinDebug\guile.obj >>link.dbg
 :LinkDbg
 echo off
 echo "Linking WinDebug/%make%.exe"
-rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /OUT:.\WinDebug/%make%.exe .\WinDebug/variable.obj  .\WinDebug/rule.obj  .\WinDebug/remote-stub.obj  .\WinDebug/commands.obj  .\WinDebug/file.obj  .\WinDebug/getloadavg.obj  .\WinDebug/default.obj  .\WinDebug/signame.obj  .\WinDebug/expand.obj  .\WinDebug/dir.obj  .\WinDebug/main.obj  .\WinDebug/getopt1.obj  .\WinDebug/job.obj  .\WinDebug/read.obj  .\WinDebug/version.obj  .\WinDebug/getopt.obj  .\WinDebug/arscan.obj  .\WinDebug/remake.obj  .\WinDebug/hash.obj  .\WinDebug/strcache.obj  .\WinDebug/misc.obj  .\WinDebug/ar.obj  .\WinDebug/function.obj  .\WinDebug/vpath.obj  .\WinDebug/implicit.obj  .\WinDebug/dirent.obj  .\WinDebug/glob.obj  .\WinDebug/fnmatch.obj  .\WinDebug/pathstuff.obj
+rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /OUT:.\WinDebug/%make%.exe .\WinDebug/variable.obj  .\WinDebug/rule.obj  .\WinDebug/remote-stub.obj  .\WinDebug/commands.obj  .\WinDebug/file.obj  .\WinDebug/getloadavg.obj  .\WinDebug/default.obj  .\WinDebug/signame.obj  .\WinDebug/expand.obj  .\WinDebug/dir.obj  .\WinDebug/main.obj  .\WinDebug/getopt1.obj  .\WinDebug/job.obj  .\WinDebug/output.obj  .\WinDebug/read.obj  .\WinDebug/version.obj  .\WinDebug/getopt.obj  .\WinDebug/arscan.obj  .\WinDebug/remake.obj  .\WinDebug/hash.obj  .\WinDebug/strcache.obj  .\WinDebug/misc.obj  .\WinDebug/ar.obj  .\WinDebug/function.obj  .\WinDebug/vpath.obj  .\WinDebug/implicit.obj  .\WinDebug/dirent.obj  .\WinDebug/glob.obj  .\WinDebug/fnmatch.obj  .\WinDebug/pathstuff.obj
 echo %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib >>link.dbg
 link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /OUT:.\WinDebug/%make%.exe @link.dbg
 if not exist .\WinDebug/%make%.exe echo "WinDebug build failed"
@@ -165,6 +198,8 @@ cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WIND
 echo WinRel\getopt1.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c job.c
 echo WinRel\job.obj >>link.rel
+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c output.c
+echo WinRel\output.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c read.c
 echo WinRel\read.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c version.c
@@ -189,21 +224,26 @@ cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WIND
 echo WinRel\vpath.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c implicit.c
 echo WinRel\implicit.obj >>link.rel
+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c loadapi.c
+echo WinRel\loadapi.obj >>link.rel
+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c load.c
+echo WinRel\load.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\dirent.c
 echo WinRel\dirent.obj >>link.rel
+cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\posixfcn.c
+echo WinRel\posixfcn.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\glob.c
 echo WinRel\glob.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\fnmatch.c
 echo WinRel\fnmatch.obj >>link.rel
 cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\pathstuff.c
 echo WinRel\pathstuff.obj >>link.rel
-if "%GUILESRC%" == "" GoTo LinkRel
-cl.exe /nologo /MT /W4 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c guile.c
+cl.exe /nologo /MT /W4 /GX /YX /O2 %GUILECFLAGS% /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c guile.c
 echo WinRel\guile.obj >>link.rel
 :LinkRel
 echo off
 echo "Linking WinRel/%make%.exe"
-rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /OUT:.\WinRel/%make%.exe .\WinRel/variable.obj  .\WinRel/rule.obj  .\WinRel/remote-stub.obj  .\WinRel/commands.obj  .\WinRel/file.obj  .\WinRel/getloadavg.obj  .\WinRel/default.obj  .\WinRel/signame.obj  .\WinRel/expand.obj  .\WinRel/dir.obj  .\WinRel/main.obj  .\WinRel/getopt1.obj  .\WinRel/job.obj  .\WinRel/read.obj  .\WinRel/version.obj  .\WinRel/getopt.obj  .\WinRel/arscan.obj  .\WinRel/remake.obj  .\WinRel/misc.obj  .\WinRel/hash.obj  .\WinRel/strcache.obj  .\WinRel/ar.obj  .\WinRel/function.obj  .\WinRel/vpath.obj  .\WinRel/implicit.obj  .\WinRel/dirent.obj  .\WinRel/glob.obj  .\WinRel/fnmatch.obj  .\WinRel/pathstuff.obj
+rem link.exe %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /OUT:.\WinRel/%make%.exe .\WinRel/variable.obj  .\WinRel/rule.obj  .\WinRel/remote-stub.obj  .\WinRel/commands.obj  .\WinRel/file.obj  .\WinRel/getloadavg.obj  .\WinRel/default.obj  .\WinRel/signame.obj  .\WinRel/expand.obj  .\WinRel/dir.obj  .\WinRel/main.obj  .\WinRel/getopt1.obj  .\WinRel/job.obj  .\WinRel/output.obj  .\WinRel/read.obj  .\WinRel/version.obj  .\WinRel/getopt.obj  .\WinRel/arscan.obj  .\WinRel/remake.obj  .\WinRel/misc.obj  .\WinRel/hash.obj  .\WinRel/strcache.obj  .\WinRel/ar.obj  .\WinRel/function.obj  .\WinRel/vpath.obj  .\WinRel/implicit.obj  .\WinRel/dirent.obj  .\WinRel/glob.obj  .\WinRel/fnmatch.obj  .\WinRel/pathstuff.obj
 echo %GUILELIBS% kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib >>link.rel
 link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /OUT:.\WinRel/%make%.exe @link.rel
 if not exist .\WinRel/%make%.exe echo "WinRel build failed"
@@ -212,48 +252,59 @@ set make=
 GoTo BuildEnd
 :GCCBuild
 echo on
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c variable.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c rule.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remote-stub.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c commands.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c file.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getloadavg.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c default.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c signame.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c expand.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c dir.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H %GUILECFLAGS% -c main.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt1.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c job.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c read.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c version.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c arscan.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remake.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c hash.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c strcache.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c misc.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ar.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c function.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c vpath.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c implicit.c
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/glob.c -o glob.o
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/fnmatch.c -o fnmatch.o
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./w32/pathstuff.c -o pathstuff.o
-@echo off
-set GUILEOBJ=
-if "%GUILESRC%" == "" GoTo LinkGCC
-set GUILEOBJ=guile.o
-echo on
-gcc -mthreads -Wall -gdwarf-2 -g3 -O2 %GUILECFLAGS% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c guile.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c variable.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c rule.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remote-stub.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c commands.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c file.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getloadavg.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c default.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c signame.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c expand.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c dir.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H %GUILECFLAGS% -c main.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt1.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c job.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c output.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c read.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c version.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c getopt.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c arscan.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c remake.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c hash.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c strcache.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c misc.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ar.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c function.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c vpath.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c implicit.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c loadapi.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c load.c
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/glob.c -o glob.o
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./glob/fnmatch.c -o fnmatch.o
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./w32/pathstuff.c -o pathstuff.o
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c ./w32/compat/posixfcn.c -o posixfcn.o
+gcc -mthreads -Wall -gdwarf-2 -g3 %OPT% %GUILECFLAGS% -I. -I./glob -I./w32/include -DWINDOWS32 -DHAVE_CONFIG_H -c guile.c
 :LinkGCC
+@echo off
+Rem The version NN of libgnumake-NN.dll.a should be bumped whenever
+Rem the API changes in binary-incompatible manner.
 @echo on
-gcc -mthreads -gdwarf-2 -g3 -o gnumake.exe variable.o rule.o remote-stub.o commands.o file.o getloadavg.o default.o signame.o expand.o dir.o main.o getopt1.o %GUILEOBJ% job.o read.o version.o getopt.o arscan.o remake.o misc.o hash.o strcache.o ar.o function.o vpath.o implicit.o glob.o fnmatch.o pathstuff.o w32_misc.o sub_proc.o w32err.o %GUILELIBS% -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbccp32
+gcc -mthreads -gdwarf-2 -g3 -o gnumake.exe variable.o rule.o remote-stub.o commands.o file.o getloadavg.o default.o signame.o expand.o dir.o main.o getopt1.o guile.o job.o output.o read.o version.o getopt.o arscan.o remake.o misc.o hash.o strcache.o ar.o function.o vpath.o implicit.o loadapi.o load.o glob.o fnmatch.o pathstuff.o posixfcn.o w32_misc.o sub_proc.o w32err.o %GUILELIBS% -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbccp32 -Wl,--out-implib=libgnumake-1.dll.a
+@GoTo BuildEnd
+:Usage
+echo Usage: %0 [options] [gcc]
+echo Options:
+echo.  --debug           For GCC only, make a debug build
+echo.                    (MSVC build always makes both debug and release)
+echo.  --without-guile   Do not compile Guile support even if found
+echo.  --help            Display these instructions and exit
 :BuildEnd
 @echo off
-set GUILEOBJ=
-set GUILESRC=
 set GUILELIBS=
 set GUILECFLAGS=
 set PKGMSC=
+set OPT=
+set COMPILER=
+set NOGUILE=
 echo on

commands.c

@@ -1,5 +1,5 @@
 /* Command processing for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,9 +14,9 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
-#include "dep.h"
+#include "makeint.h"
 #include "filedef.h"
+#include "dep.h"
 #include "variable.h"
 #include "job.h"
 #include "commands.h"
@@ -33,7 +33,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 int remote_kill (int id, int sig);
 
-#ifndef	HAVE_UNISTD_H
+#ifndef HAVE_UNISTD_H
 int getpid ();
 #endif
 
@@ -68,7 +68,7 @@ set_file_variables (struct file *file)
   struct dep *d;
   const char *at, *percent, *star, *less;
 
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
   /* If the target is an archive member 'lib(member)',
      then $@ is 'lib' and $% is 'member'.  */
 
@@ -90,7 +90,7 @@ set_file_variables (struct file *file)
       percent = p;
     }
   else
-#endif	/* NO_ARCHIVES.  */
+#endif  /* NO_ARCHIVES.  */
     {
       at = file->name;
       percent = "";
@@ -100,35 +100,35 @@ set_file_variables (struct file *file)
   if (file->stem == 0)
     {
       /* In Unix make, $* is set to the target name with
-	 any suffix in the .SUFFIXES list stripped off for
-	 explicit rules.  We store this in the 'stem' member.  */
+         any suffix in the .SUFFIXES list stripped off for
+         explicit rules.  We store this in the 'stem' member.  */
       const char *name;
       unsigned int len;
 
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
       if (ar_name (file->name))
-	{
-	  name = strchr (file->name, '(') + 1;
-	  len = strlen (name) - 1;
-	}
+        {
+          name = strchr (file->name, '(') + 1;
+          len = strlen (name) - 1;
+        }
       else
 #endif
-	{
-	  name = file->name;
-	  len = strlen (name);
-	}
+        {
+          name = file->name;
+          len = strlen (name);
+        }
 
       for (d = enter_file (strcache_add (".SUFFIXES"))->deps; d ; d = d->next)
-	{
-	  unsigned int slen = strlen (dep_name (d));
-	  if (len > slen && strneq (dep_name (d), name + (len - slen), slen))
-	    {
-	      file->stem = strcache_add_len (name, len - slen);
-	      break;
-	    }
-	}
+        {
+          unsigned int slen = strlen (dep_name (d));
+          if (len > slen && strneq (dep_name (d), name + (len - slen), slen))
+            {
+              file->stem = strcache_add_len (name, len - slen);
+              break;
+            }
+        }
       if (d == 0)
-	file->stem = "";
+        file->stem = "";
     }
   star = file->stem;
 
@@ -147,7 +147,7 @@ set_file_variables (struct file *file)
        In this case $< is the same as $@.  */
     less = at;
 
-#define	DEFINE_VARIABLE(name, len, value) \
+#define DEFINE_VARIABLE(name, len, value) \
   (void) define_variable_for_file (name,len,value,o_automatic,0,file)
 
   /* Define the variables.  */
@@ -200,13 +200,13 @@ set_file_variables (struct file *file)
 
     cp = plus_value;
 
-    qmark_len = plus_len + 1;	/* Will be this or less.  */
+    qmark_len = plus_len + 1;   /* Will be this or less.  */
     for (d = file->deps; d != 0; d = d->next)
       if (! d->ignore_mtime && ! d->need_2nd_expansion)
         {
           const char *c = dep_name (d);
 
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
           if (ar_name (c))
             {
               c = strchr (c, '(') + 1;
@@ -220,7 +220,7 @@ set_file_variables (struct file *file)
           cp += len;
           *cp++ = FILE_LIST_SEPARATOR;
           if (! (d->changed || always_make_flag))
-            qmark_len -= len + 1;	/* Don't space in $? for this one.  */
+            qmark_len -= len + 1;       /* Don't space in $? for this one.  */
         }
 
     /* Kill the last space and define the variable.  */
@@ -275,23 +275,23 @@ set_file_variables (struct file *file)
           continue;
 
         c = dep_name (d);
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
         if (ar_name (c))
-	  {
-	    c = strchr (c, '(') + 1;
-	    len = strlen (c) - 1;
-	  }
-	else
+          {
+            c = strchr (c, '(') + 1;
+            len = strlen (c) - 1;
+          }
+        else
 #endif
-	  len = strlen (c);
+          len = strlen (c);
 
         if (d->ignore_mtime)
           {
             memcpy (bp, c, len);
-	    bp += len;
-	    *bp++ = FILE_LIST_SEPARATOR;
-	  }
-	else
+            bp += len;
+            *bp++ = FILE_LIST_SEPARATOR;
+          }
+        else
           {
             memcpy (cp, c, len);
             cp += len;
@@ -319,7 +319,7 @@ set_file_variables (struct file *file)
     DEFINE_VARIABLE ("|", 1, bar_value);
   }
 
-#undef	DEFINE_VARIABLE
+#undef  DEFINE_VARIABLE
 }
 
 /* Chop CMDS up into individual command lines if necessary.
@@ -401,7 +401,7 @@ chop_commands (struct commands *cmds)
      CMDS->any_recurse flag.  */
 
   if (nlines > USHRT_MAX)
-    fatal (&cmds->fileinfo, _("Recipe has too many lines (%ud)"), nlines);
+    ON (fatal, &cmds->fileinfo, _("Recipe has too many lines (%ud)"), nlines);
 
   cmds->ncommand_lines = nlines;
   cmds->command_lines = lines;
@@ -457,7 +457,7 @@ execute_file_commands (struct file *file)
     {
       /* If there are no commands, assume everything worked.  */
       set_command_state (file, cs_running);
-      file->update_status = 0;
+      file->update_status = us_success;
       notice_finished_file (file);
       return;
     }
@@ -468,6 +468,11 @@ execute_file_commands (struct file *file)
 
   set_file_variables (file);
 
+  /* If this is a loaded dynamic object, unload it before remaking.
+     Some systems don't support overwriting a loaded object.  */
+  if (file->loaded)
+    unload_file (file->name);
+
   /* Start the commands running.  */
   new_job (file);
 }
@@ -512,14 +517,14 @@ fatal_error_signal (int sig)
       DWORD susp_count = SuspendThread (main_thread);
 
       if (susp_count != 0)
-	fprintf (stderr, "SuspendThread: suspend count = %ld\n", susp_count);
+        fprintf (stderr, "SuspendThread: suspend count = %ld\n", susp_count);
       else if (susp_count == (DWORD)-1)
-	{
-	  DWORD ierr = GetLastError ();
+        {
+          DWORD ierr = GetLastError ();
 
-	  fprintf (stderr, "SuspendThread: error %ld: %s\n",
-		   ierr, map_windows32_error_to_string (ierr));
-	}
+          fprintf (stderr, "SuspendThread: error %ld: %s\n",
+                   ierr, map_windows32_error_to_string (ierr));
+        }
     }
 #endif
   handling_fatal_signal = 1;
@@ -535,8 +540,8 @@ fatal_error_signal (int sig)
     {
       struct child *c;
       for (c = children; c != 0; c = c->next)
-	if (!c->remote)
-	  (void) kill (c->pid, SIGTERM);
+        if (!c->remote)
+          (void) kill (c->pid, SIGTERM);
     }
 
   /* If we got a signal that means the user
@@ -554,18 +559,18 @@ fatal_error_signal (int sig)
       struct child *c;
 
       /* Remote children won't automatically get signals sent
-	 to the process group, so we must send them.  */
+         to the process group, so we must send them.  */
       for (c = children; c != 0; c = c->next)
-	if (c->remote)
-	  (void) remote_kill (c->pid, sig);
+        if (c->remote)
+          (void) remote_kill (c->pid, sig);
 
       for (c = children; c != 0; c = c->next)
-	delete_child_targets (c);
+        delete_child_targets (c);
 
       /* Clean up the children.  We don't just use the call below because
-	 we don't want to print the "Waiting for children" message.  */
+         we don't want to print the "Waiting for children" message.  */
       while (job_slots_used > 0)
-	reap_children (1, 0);
+        reap_children (1, 0);
     }
   else
     /* Wait for our children to die.  */
@@ -580,7 +585,7 @@ fatal_error_signal (int sig)
   if (sig == SIGQUIT)
     /* We don't want to send ourselves SIGQUIT, because it will
        cause a core dump.  Just exit instead.  */
-    exit (EXIT_FAILURE);
+    exit (MAKE_TROUBLE);
 #endif
 
 #ifdef WINDOWS32
@@ -615,17 +620,19 @@ delete_target (struct file *file, const char *on_behalf_of)
   if (ar_name (file->name))
     {
       time_t file_date = (file->last_mtime == NONEXISTENT_MTIME
-			  ? (time_t) -1
-			  : (time_t) FILE_TIMESTAMP_S (file->last_mtime));
+                          ? (time_t) -1
+                          : (time_t) FILE_TIMESTAMP_S (file->last_mtime));
       if (ar_member_date (file->name) != file_date)
-	{
-	  if (on_behalf_of)
-	    error (NILF, _("*** [%s] Archive member '%s' may be bogus; not deleted"),
-		   on_behalf_of, file->name);
-	  else
-	    error (NILF, _("*** Archive member '%s' may be bogus; not deleted"),
-		   file->name);
-	}
+        {
+          if (on_behalf_of)
+            OSS (error, NILF,
+                 _("*** [%s] Archive member '%s' may be bogus; not deleted"),
+                 on_behalf_of, file->name);
+          else
+            OS (error, NILF,
+                _("*** Archive member '%s' may be bogus; not deleted"),
+                file->name);
+        }
       return;
     }
 #endif
@@ -636,12 +643,13 @@ delete_target (struct file *file, const char *on_behalf_of)
       && FILE_TIMESTAMP_STAT_MODTIME (file->name, st) != file->last_mtime)
     {
       if (on_behalf_of)
-	error (NILF, _("*** [%s] Deleting file '%s'"), on_behalf_of, file->name);
+        OSS (error, NILF,
+             _("*** [%s] Deleting file '%s'"), on_behalf_of, file->name);
       else
-	error (NILF, _("*** Deleting file '%s'"), file->name);
+        OS (error, NILF, _("*** Deleting file '%s'"), file->name);
       if (unlink (file->name) < 0
-	  && errno != ENOENT)	/* It disappeared; so what.  */
-	perror_with_name ("unlink: ", file->name);
+          && errno != ENOENT)   /* It disappeared; so what.  */
+        perror_with_name ("unlink: ", file->name);
     }
 }
 

commands.h

@@ -1,5 +1,5 @@
 /* Definition of data structures describing shell commands for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -19,20 +19,20 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 struct commands
   {
-    struct floc fileinfo;	/* Where commands were defined.  */
-    char *commands;		/* Commands text.  */
-    char **command_lines;	/* Commands chopped up into lines.  */
-    char *lines_flags;		/* One set of flag bits for each line.  */
+    gmk_floc fileinfo;          /* Where commands were defined.  */
+    char *commands;             /* Commands text.  */
+    char **command_lines;       /* Commands chopped up into lines.  */
+    char *lines_flags;          /* One set of flag bits for each line.  */
     unsigned short ncommand_lines;/* Number of command lines.  */
     char recipe_prefix;         /* Recipe prefix for this command set.  */
     unsigned int any_recurse:1; /* Nonzero if any 'lines_flags' elt has */
-				/* the COMMANDS_RECURSE bit set.  */
+                                /* the COMMANDS_RECURSE bit set.  */
   };
 
 /* Bits in 'lines_flags'.  */
-#define	COMMANDS_RECURSE	1 /* Recurses: + or $(MAKE).  */
-#define	COMMANDS_SILENT		2 /* Silent: @.  */
-#define	COMMANDS_NOERROR	4 /* No errors: -.  */
+#define COMMANDS_RECURSE        1 /* Recurses: + or $(MAKE).  */
+#define COMMANDS_SILENT         2 /* Silent: @.  */
+#define COMMANDS_NOERROR        4 /* No errors: -.  */
 
 void execute_file_commands (struct file *file);
 void print_commands (const struct commands *cmds);

config.ami.template

@@ -1,5 +1,5 @@
 /* config.h -- hand-massaged for Amiga                                  -*-C-*-
-Copyright (C) 1995-2012 Free Software Foundation, Inc.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -16,7 +16,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* Define if on AIX 3.
    System headers sometimes define this.
-   We just want to avoid a redefinition error message.	*/
+   We just want to avoid a redefinition error message.  */
 #ifndef _ALL_SOURCE
 /* #undef _ALL_SOURCE */
 #endif
@@ -53,9 +53,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
 /* #undef HAVE_ALLOCA_H */
 
-/* Define if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
 /* Define if your system has a working fnmatch function.  */
 /* #undef HAVE_FNMATCH */
 
@@ -71,7 +68,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if the 'long double' type works.  */
 /* #undef HAVE_LONG_DOUBLE */
 
-/* Define if you support file names longer than 14 characters.	*/
+/* Define if you support file names longer than 14 characters.  */
 #define HAVE_LONG_FILE_NAMES 1
 
 /* Define if you have a working 'mmap' system call.  */
@@ -87,7 +84,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if your struct stat has st_blocks.  */
 /* #undef HAVE_ST_BLOCKS */
 
-/* Define if you have the strcoll function and it is properly defined.	*/
+/* Define if you have the strcoll function and it is properly defined.  */
 #define HAVE_STRCOLL 1
 
 /* Define if your struct stat has st_rdev.  */
@@ -96,7 +93,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have the strftime function.  */
 #define HAVE_STRFTIME 1
 
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.	*/
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
 /* #undef HAVE_SYS_WAIT_H */
 
 /* Define if your struct tm has tm_zone.  */
@@ -112,16 +109,10 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if utime(file, NULL) sets file's timestamp to the present.  */
 /* #undef HAVE_UTIME_NULL */
 
-/* Define if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define if you have the vprintf function.  */
-#define HAVE_VPRINTF 1
-
 /* Define if you have the wait3 system call.  */
 /* #undef HAVE_WAIT3 */
 
-/* Define if on MINIX.	*/
+/* Define if on MINIX.  */
 /* #undef _MINIX */
 
 /* Define if your struct nlist has an n_un member.  */
@@ -154,19 +145,16 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* If using the C implementation of alloca, define if you know the
    direction of stack growth for your system; otherwise it will be
    automatically deduced at run-time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown
  */
 #define STACK_DIRECTION -1
 
 /* Define if the 'S_IS*' macros in <sys/stat.h> do not work properly.  */
 /* #undef STAT_MACROS_BROKEN */
 
-/* Define if your compiler conforms to the ANSI C standard. */
-#define HAVE_ANSI_COMPILER 1
-
-/* Define if you have the ANSI C header files.	*/
+/* Define if you have the ANSI C header files.  */
 #define STDC_HEADERS
 
 /* Define on System V Release 4.  */
@@ -185,9 +173,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
    instead of <sys/cpustats.h>.  */
 /* #undef UMAX4_3 */
 
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
 /* Name of this package (needed by automake) */
 #define PACKAGE "%PACKAGE%"
 
@@ -249,7 +234,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have the seteuid function.  */
 /* #undef HAVE_SETEUID */
 
-/* Define if you have the setlinebuf function.	*/
+/* Define if you have the setlinebuf function.  */
 /* #undef HAVE_SETLINEBUF */
 
 /* Define if you have the setregid function.  */
@@ -258,7 +243,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have the setreuid function.  */
 /* #undef HAVE_SETREUID */
 
-/* Define if you have the sigsetmask function.	*/
+/* Define if you have the sigsetmask function.  */
 /* #undef HAVE_SIGSETMASK */
 
 /* Define if you have the socket function.  */
@@ -303,9 +288,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have the <ndir.h> header file.  */
 /* #undef HAVE_NDIR_H */
 
-/* Define to 1 if you have the <stdarg.h> header file. */
-#define HAVE_STDARG_H 1
-
 /* Define if you have the <stdlib.h> header file.  */
 /* #undef HAVE_STDLIB_H */
 
@@ -336,9 +318,18 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define if you have the kstat library (-lkstat).  */
 /* #undef HAVE_LIBKSTAT */
 
+/* Define to 1 if you have the `isatty' function. */
+/* #undef HAVE_ISATTY */
+
+/* Define to 1 if you have the `ttyname' function. */
+/* #undef HAVE_TTYNAME */
+
 /* Define if you have the sun library (-lsun).  */
 /* #undef HAVE_LIBSUN */
 
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
+
 /* Define for Case Insensitve behavior */
 #define HAVE_CASE_INSENSITIVE_FS
 

config.h-vms.template

@@ -1,6 +1,6 @@
 /* config.h-vms. Generated by hand by Klaus Kämpf <kkaempf@rmi.de>      -*-C-*-
 
-Copyright (C) 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -16,7 +16,13 @@ You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* config.h.  Generated automatically by configure.  */
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+/* config.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Pull in types.h here to get __CRTL_VER defined for old versions of the
+   compiler which don't define it. */
+#ifdef __DECC
+# include <types.h>
+#endif
 
 /* Define to 1 if on AIX 3.
    System headers sometimes define this.
@@ -75,9 +81,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).  */
 /* #undef HAVE_ALLOCA_H */
 
-/* Define to 1 if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
 /* Define to 1 if you have the fdopen function.  */
 #define HAVE_FDOPEN 1
 
@@ -141,12 +144,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if utime(file, NULL) sets file's timestamp to the present.  */
 /* #undef HAVE_UTIME_NULL */
 
-/* Define to 1 if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define to 1 if you have the vprintf function.  */
-#define HAVE_VPRINTF 1
-
 /* Define to 1 if you have the wait3 system call.  */
 /* #undef HAVE_WAIT3 */
 
@@ -186,9 +183,9 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* If using the C implementation of alloca, define if you know the
    direction of stack growth for your system; otherwise it will be
    automatically deduced at run-time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown
  */
 /* #undef STACK_DIRECTION */
 
@@ -216,9 +213,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
    instead of <sys/cpustats.h>.  */
 /* #undef UMAX4_3 */
 
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
 /* Name of this package (needed by automake) */
 #define PACKAGE "%PACKAGE%"
 
@@ -336,12 +330,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the <ndir.h> header file.  */
 /* #undef HAVE_NDIR_H */
 
-/* Define to 1 if your compiler conforms to the ANSI C standard. */
-#define HAVE_ANSI_COMPILER 1
-
-/* Define to 1 if you have the <stdarg.h> header file. */
-#define HAVE_STDARG_H 1
-
 /* Define to 1 if you have the <stdlib.h> header file.  */
 #define HAVE_STDLIB_H 1
 
@@ -374,6 +362,12 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the sun library (-lsun).  */
 /* #undef HAVE_LIBSUN */
 
+/* Define to 1 if you have the `isatty' function. */
+/* #undef HAVE_ISATTY */
+
+/* Define to 1 if you have the `ttyname' function. */
+/* #undef HAVE_TTYNAME */
+
 /* Use high resolution file timestamps if nonzero. */
 #define FILE_TIMESTAMP_HI_RES 0
 
@@ -390,15 +384,9 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* #undef HAVE_VMSDIR_H */
 /* #undef _DIRENT_HAVE_D_NAMLEN */
 
-/* On older systems without 7.0 backport of CRTL the first one is defined */
-#ifdef __CRTL_VER
-# if __CRTL_VER < 70000000
-#  define HAVE_VMSDIR_H 1
-# endif
-#else
-# if __VMS_VER < 70000000
-#  define HAVE_VMSDIR_H 1
-# endif
+/* On older systems without 7.0 backport of CRTL use non-VMS code for opendir() etc. */
+#if __CRTL_VER < 70000000
+# define HAVE_VMSDIR_H 1
 #endif
 
 #if defined(HAVE_VMSDIR_H) && defined(HAVE_DIRENT_H)
@@ -424,10 +412,21 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* Define if using alloca.c.  */
 /* #undef C_ALLOCA */
-/* maybe this should be placed into make.h */
-#if	defined(__VAX) && defined(__DECC)
-#define alloca(n)	__ALLOCA(n)
+/* maybe this should be placed into makeint.h */
+#if     defined(__VAX) && defined(__DECC)
+#define alloca(n)       __ALLOCA(n)
 #endif
 
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
+
+/* Define to 1 to write even short single-line actions into a VMS/DCL command
+   file; this also enables exporting make environment variables into the
+   (sub-)process, which executes the action.
+   The usual make rules apply whether a shell variable - here a DCL symbol or
+   VMS logical [see CRTL getenv()] - is added to the make environment and
+   is exported. */
+#define USE_DCL_COM_FILE 1
+
 /* Build host information. */
 #define MAKE_HOST "VMS"

config.h.W32.template

@@ -1,6 +1,6 @@
 /* config.h.W32 -- hand-massaged config.h file for Windows builds       -*-C-*-
 
-Copyright (C) 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1996-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -62,9 +62,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
    */
 /* #undef HAVE_ALLOCA_H */
 
-/* Define to 1 if your compiler conforms to the ANSI C standard. */
-#define HAVE_ANSI_COMPILER 1
-
 /* Define to 1 if you have the 'atexit' function. */
 #define HAVE_ATEXIT 1
 
@@ -109,9 +106,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 # define HAVE_DIRECT_H 1
 #endif
 
-/* Define to 1 if you don't have 'vprintf' but do have '_doprnt.' */
-/* #undef HAVE_DOPRNT */
-
 /* Use platform specific coding */
 #define HAVE_DOS_PATHS 1
 
@@ -129,9 +123,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the 'fileno' function. */
 #define HAVE_FILENO 1
 
-/* Define to 1 if you have the 'fork' function. */
-/* #undef HAVE_FORK */
-
 /* Define to 1 if you have the 'getcwd' function.  */
 #define HAVE_GETCWD 1
 
@@ -247,9 +238,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the 'socket' function. */
 /* #undef HAVE_SOCKET */
 
-/* Define to 1 if you have the <stdarg.h> header file. */
-#define HAVE_STDARG_H 1
-
 /* Define to 1 if you have the <stdint.h> header file. */
 #ifdef __MINGW32__
 #define HAVE_STDINT_H 1
@@ -304,6 +292,13 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the 'strsignal' function. */
 /* #undef HAVE_STRSIGNAL */
 
+/* Define to 1 if you have the `isatty' function. */
+#define HAVE_ISATTY 1
+
+/* Define to 1 if you have the `ttyname' function. */
+#define HAVE_TTYNAME 1
+char *ttyname (int);
+
 /* Define to 1 if 'n_un.n_name' is a member of 'struct nlist'. */
 /* #undef HAVE_STRUCT_NLIST_N_UN_N_NAME */
 
@@ -348,37 +343,21 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #define HAVE_UNISTD_H 1
 #endif
 
-/* Define to 1 if you have the <varargs.h> header file. */
-/* #undef HAVE_VARARGS_H */
-
-/* Define to 1 if you have the 'vfork' function. */
-/* #undef HAVE_VFORK */
-
-/* Define to 1 if you have the <vfork.h> header file. */
-/* #undef HAVE_VFORK_H */
-
-/* Define to 1 if you have the 'vprintf' function. */
-#define HAVE_VPRINTF 1
-
-
 /* Define to 1 if you have the 'wait3' function. */
 /* #undef HAVE_WAIT3 */
 
 /* Define to 1 if you have the 'waitpid' function. */
 /* #undef HAVE_WAITPID */
 
-/* Define to 1 if 'fork' works. */
-/* #undef HAVE_WORKING_FORK */
-
-/* Define to 1 if 'vfork' works. */
-/* #undef HAVE_WORKING_VFORK */
-
 /* Build host information. */
 #define MAKE_HOST "Windows32"
 
 /* Define to 1 to enable job server support in GNU make. */
 #define MAKE_JOBSERVER 1
 
+/* Define to 1 to enable 'load' support in GNU make. */
+#define MAKE_LOAD 1
+
 /* Define to 1 to enable symbolic link timestamp checking. */
 /* #undef MAKE_SYMLINKS */
 
@@ -427,9 +406,9 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* If using the C implementation of alloca, define if you know the
    direction of stack growth for your system; otherwise it will be
    automatically deduced at run time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown */
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown */
 /* #undef STACK_DIRECTION */
 
 /* Define to 1 if the 'S_IS*' macros in <sys/stat.h> do not work properly. */
@@ -511,9 +490,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #define uintmax_t unsigned long
 #endif
 
-/* Define as 'fork' if 'vfork' does not work. */
-/*#define vfork fork*/
-
 /* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
 /* #undef HAVE_SYS_WAIT_H */
 

config/.gitignore

@@ -1,11 +1,12 @@
-*.m4
-config.*
-mkinstalldirs
-texinfo.tex
-mdate-sh
+ar-lib
 compile
+config.guess
+config.rpath
+config.sub
 depcomp
 install-sh
+mdate-sh
 missing
-
-Makefile Makefile.in
+texinfo.tex
+*.m4
+!dospaths.m4

config/ChangeLog.1

@@ -33,7 +33,7 @@
 	* Makefile.am: New file.
 
 
-Copyright (C) 2002-2012 Free Software Foundation, Inc.
+Copyright (C) 2002-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

config/Makefile.am

@@ -1,5 +1,5 @@
 # -*-Makefile-*-, or close enough
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -15,34 +15,4 @@
 # You should have received a copy of the GNU General Public License along with
 # this program.  If not, see <http://www.gnu.org/licenses/>.
 
-EXTRA_DIST =	\
-		codeset.m4 \
-		dospaths.m4 \
-		gettext.m4 \
-		glibc21.m4 \
-		iconv.m4 \
-		intdiv0.m4 \
-		intmax.m4 \
-		inttypes-pri.m4 \
-		inttypes.m4 \
-		inttypes_h.m4 \
-		isc-posix.m4 \
-		isc-posix.m4 \
-		lcmessage.m4 \
-		lib-ld.m4 \
-		lib-link.m4 \
-		lib-prefix.m4 \
-		longdouble.m4 \
-		longlong.m4 \
-		nls.m4 \
-		po.m4 \
-		printf-posix.m4 \
-		progtest.m4 \
-		signed.m4 \
-		size_max.m4 \
-		stdint_h.m4 \
-		uintmax_t.m4 \
-		ulonglong.m4 \
-		wchar_t.m4 \
-		wint_t.m4 \
-		xsize.m4
+# Autoconf / automake know how to handle this directory.

config/dospaths.m4

@@ -1,7 +1,7 @@
 # Test if the system uses DOS-style pathnames (drive specs and backslashes)
 # By Paul Smith <psmith@gnu.org>.  Based on dos.m4 by Jim Meyering.
 #
-# Copyright (C) 1993-2012 Free Software Foundation, Inc.
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under

configh.dos.template

@@ -1,6 +1,6 @@
 /* configh.dos -- hand-massaged config.h file for MS-DOS builds         -*-C-*-
 
-Copyright (C) 1994-2012 Free Software Foundation, Inc.
+Copyright (C) 1994-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -76,16 +76,6 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to 1 if you have the select function.  */
 #define HAVE_SELECT 1
 
-/* Define to 1 if your compiler conforms to the ANSI C standard. */
-#define HAVE_ANSI_COMPILER 1
-
-/* Define to 1 if you have the <stdarg.h> header file. */
-#define HAVE_STDARG_H 1
-
-/* Define to 1 if you have the vprintf library function.  */
-#undef HAVE_VPRINTF
-#define HAVE_VPRINTF 1
-
 /* Define to 1 if you have the stricmp function.  */
 #define HAVE_STRICMP 1
 
@@ -110,8 +100,8 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* Define to the version of this package. */
 #define PACKAGE_VERSION "%VERSION%"
 
-/* Define to 1 if the C compiler supports function prototypes. */
-#define PROTOTYPES 1
+/* Output sync sypport */
+#define NO_OUTPUT_SYNC
 
 /* Version number of package */
 #define VERSION "%VERSION%"

configure.ac

@@ -1,6 +1,6 @@
 # Process this file with autoconf to produce a configure script.
 #
-# Copyright (C) 1993-2012 Free Software Foundation, Inc.
+# Copyright (C) 1993-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -16,10 +16,9 @@
 # You should have received a copy of the GNU General Public License along with
 # this program.  If not, see <http://www.gnu.org/licenses/>.
 
-AC_INIT([GNU make],[3.82.90],[bug-make@gnu.org])
+AC_INIT([GNU make],[4.1],[bug-make@gnu.org])
 
-AC_PREREQ([2.59])
-AC_REVISION([$Id$])
+AC_PREREQ([2.62])
 
 # Autoconf setup
 AC_CONFIG_AUX_DIR([config])
@@ -27,9 +26,13 @@ AC_CONFIG_SRCDIR([vpath.c])
 AC_CONFIG_HEADERS([config.h])
 
 # Automake setup
-AM_INIT_AUTOMAKE([1.9])
+# We have to enable "foreign" because ChangeLog is auto-generated
+# We cannot enable -Werror because gettext 0.18.1 has invalid content
+# When we update gettext to 0.18.3 or better we can add it again.
+AM_INIT_AUTOMAKE([1.11.1 silent-rules foreign -Wall])
 
 # Checks for programs.
+AC_USE_SYSTEM_EXTENSIONS
 AC_PROG_CC
 AC_PROG_INSTALL
 AC_PROG_RANLIB
@@ -38,6 +41,9 @@ AC_CHECK_PROG([AR], [ar], [ar], [ar])
 # Perl is needed for the test suite (only)
 AC_CHECK_PROG([PERL], [perl], [perl], [perl])
 
+# Needed for w32/Makefile.am
+AM_PROG_AR
+
 # Specialized system macros
 AC_CANONICAL_HOST
 AC_AIX
@@ -45,7 +51,6 @@ AC_ISC_POSIX
 AC_MINIX
 
 # Enable gettext, in "external" mode.
-
 AM_GNU_GETTEXT_VERSION([0.18.1])
 AM_GNU_GETTEXT([external])
 
@@ -63,17 +68,7 @@ AC_HEADER_DIRENT
 AC_HEADER_STAT
 AC_HEADER_TIME
 AC_CHECK_HEADERS([stdlib.h locale.h unistd.h limits.h fcntl.h string.h \
-		  memory.h sys/param.h sys/resource.h sys/time.h sys/timeb.h])
-
-# Set a flag if we have an ANSI C compiler
-AS_IF([test "$ac_cv_prog_cc_stdc" != no],
-[ AC_DEFINE([HAVE_ANSI_COMPILER], [1],
-            [Define to 1 if your compiler conforms to the ANSI C standard.])
-])
-
-
-# Determine what kind of variadic function calls we support
-AC_CHECK_HEADERS([stdarg.h varargs.h], [break])
+                  memory.h sys/param.h sys/resource.h sys/time.h sys/timeb.h])
 
 AM_PROG_CC_C_O
 AC_C_CONST
@@ -101,12 +96,12 @@ AC_CACHE_CHECK([whether to use high resolution file timestamps],
 #if HAVE_INTTYPES_H
 # include <inttypes.h>
 #endif]],
-	              [[char a[0x7fffffff < (uintmax_t)-1 >> 30 ? 1 : -1];]])],
+                      [[char a[0x7fffffff < (uintmax_t)-1 >> 30 ? 1 : -1];]])],
         [make_cv_file_timestamp_hi_res=yes])
   ])])
 AS_IF([test "$make_cv_file_timestamp_hi_res" = yes], [val=1], [val=0])
 AC_DEFINE_UNQUOTED([FILE_TIMESTAMP_HI_RES], [$val],
-		   [Use high resolution file timestamps if nonzero.])
+                   [Use high resolution file timestamps if nonzero.])
 
 AS_IF([test "$make_cv_file_timestamp_hi_res" = yes],
 [ # Solaris 2.5.1 needs -lposix4 to get the clock_gettime function.
@@ -114,7 +109,7 @@ AS_IF([test "$make_cv_file_timestamp_hi_res" = yes],
   AC_SEARCH_LIBS([clock_gettime], [rt posix4])
   AS_IF([test "$ac_cv_search_clock_gettime" != no],
   [ AC_DEFINE([HAVE_CLOCK_GETTIME], [1],
-	      [Define to 1 if you have the clock_gettime function.])
+              [Define to 1 if you have the clock_gettime function.])
   ])
 ])
 
@@ -128,24 +123,24 @@ AC_CACHE_CHECK([for standard gettimeofday], [ac_cv_func_gettimeofday],
   [ac_cv_func_gettimeofday=no
    AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <sys/time.h>
                   int main ()
-	          {
-		    struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
-		    exit (gettimeofday (&t, 0) != 0
-		          || t.tv_sec < 0 || t.tv_usec < 0);
-	          }]])],
-		  [ac_cv_func_gettimeofday=yes],
-		  [ac_cv_func_gettimeofday=no],
-		  [ac_cv_func_gettimeofday="no (cross-compiling)"])])
+                  {
+                    struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
+                    exit (gettimeofday (&t, 0) != 0
+                          || t.tv_sec < 0 || t.tv_usec < 0);
+                  }]])],
+                  [ac_cv_func_gettimeofday=yes],
+                  [ac_cv_func_gettimeofday=no],
+                  [ac_cv_func_gettimeofday="no (cross-compiling)"])])
 AS_IF([test "$ac_cv_func_gettimeofday" = yes],
 [ AC_DEFINE([HAVE_GETTIMEOFDAY], [1],
-	    [Define to 1 if you have a standard gettimeofday function])
+            [Define to 1 if you have a standard gettimeofday function])
 ])
 
 AC_CHECK_FUNCS([strdup strndup mkstemp mktemp fdopen fileno \
-	        dup2 getcwd realpath sigsetmask sigaction \
+                dup dup2 getcwd realpath sigsetmask sigaction \
                 getgroups seteuid setegid setlinebuf setreuid setregid \
                 getrlimit setrlimit setvbuf pipe strerror strsignal \
-		lstat readlink atexit])
+                lstat readlink atexit isatty ttyname])
 
 # We need to check declarations, not just existence, because on Tru64 this
 # function is not declared without special flags, which themselves cause
@@ -164,8 +159,6 @@ AC_CHECK_FUNCS([strcasecmp strncasecmp strcmpi strncmpi stricmp strnicmp])
 AC_FUNC_STRCOLL
 
 AC_FUNC_ALLOCA
-AC_FUNC_FORK([])
-AC_FUNC_VPRINTF
 AC_FUNC_CLOSEDIR_VOID
 
 # See if the user wants to add (or not) GNU Guile support
@@ -194,11 +187,11 @@ AC_FUNC_GETLOADAVG
 
 AS_IF([test "$ac_cv_header_nlist_h" = yes],
 [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <nlist.h>]],
-	[[struct nlist nl;
+        [[struct nlist nl;
           nl.n_name = "string";
           return 0;]])],
-	[make_cv_nlist_struct=yes],
-	[make_cv_nlist_struct=no])
+        [make_cv_nlist_struct=yes],
+        [make_cv_nlist_struct=no])
   AS_IF([test "$make_cv_nlist_struct" = yes],
   [ AC_DEFINE([NLIST_STRUCT], [1],
        [Define to 1 if struct nlist.n_name is a pointer rather than an array.])
@@ -256,8 +249,8 @@ AS_IF([test "$PATH_SEPARATOR" = ';'],
 AC_SUBST([REMOTE]) REMOTE=stub
 use_customs=false
 AC_ARG_WITH([customs],
-[ AC_HELP_STRING([--with-customs=DIR],
-		 [enable remote jobs via Customs--see README.customs])],
+[AC_HELP_STRING([--with-customs=DIR],
+                [enable remote jobs via Customs--see README.customs])],
 [ AS_CASE([$withval], [n|no], [:],
     [make_cppflags="$CPPFLAGS"
      AS_CASE([$withval],
@@ -267,7 +260,7 @@ AC_ARG_WITH([customs],
      CF_NETLIBS
      AC_CHECK_HEADER([customs.h],
                      [use_customs=true
-		      REMOTE=cstms
+                      REMOTE=cstms
                       LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags"],
                      [with_customs=no
                       CPPFLAGS="$make_cppflags" make_badcust=yes])
@@ -281,7 +274,7 @@ AM_CONDITIONAL([USE_CUSTOMS], [test "$use_customs" = true])
 AH_TEMPLATE([HAVE_CASE_INSENSITIVE_FS], [Use case insensitive file names])
 AC_ARG_ENABLE([case-insensitive-file-system],
   AC_HELP_STRING([--enable-case-insensitive-file-system],
-		 [assume file systems are case insensitive]),
+                 [assume file systems are case insensitive]),
   [AS_IF([test "$enableval" = yes], [AC_DEFINE([HAVE_CASE_INSENSITIVE_FS])])])
 
 # See if we can handle the job server feature, and if the user wants it.
@@ -330,20 +323,20 @@ AC_ARG_ENABLE([load],
   [make_cv_load="$enableval" user_load="$enableval"],
   [make_cv_load="yes"])
 
-AS_CASE([/$ac_cv_func_dlopen/$ac_cv_func_dlsym/$ac_cv_func_dlerror/],
+AS_CASE([/$ac_cv_have_decl_dlopen/$ac_cv_have_decl_dlsym/$ac_cv_have_decl_dlerror/],
   [*/no/*], [make_cv_load=no])
 
+# We might need -ldl
+AS_IF([test "$make_cv_load" = yes], [
+  AC_SEARCH_LIBS([dlopen], [dl], [], [make_cv_load=])
+  ])
+
 AS_CASE([/$make_cv_load/$user_load/],
   [*/no/*], [make_cv_load=no],
   [AC_DEFINE(MAKE_LOAD, 1,
              [Define to 1 to enable 'load' support in GNU make.])
   ])
 
-# We might need -ldl
-AS_IF([test "$make_cv_load" = yes], [
-  AC_SEARCH_LIBS([dlopen], [dl], [], [make_cv_load=])
-  ])
-
 # If we want load support, we might need to link with export-dynamic.
 # See if we can figure it out.  Unfortunately this is very difficult.
 # For example passing -rdynamic to the SunPRO linker gives a warning
@@ -352,13 +345,13 @@ AS_IF([test "$make_cv_load" = yes], [
   AC_MSG_CHECKING([If the linker accepts -Wl,--export-dynamic])
   old_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
-  AC_LINK_IFELSE([int main(){}],
+  AC_LINK_IFELSE([AC_LANG_SOURCE([int main(){}])],
     [AC_MSG_RESULT([yes])
      AC_SUBST([AM_LDFLAGS], [-Wl,--export-dynamic])],
     [AC_MSG_RESULT([no])
      AC_MSG_CHECKING([If the linker accepts -rdynamic])
      LDFLAGS="$old_LDFLAGS -rdynamic"
-     AC_LINK_IFELSE([int main(){}],
+     AC_LINK_IFELSE([AC_LANG_SOURCE([int main(){}])],
        [AC_MSG_RESULT([yes])
         AC_SUBST([AM_LDFLAGS], [-rdynamic])],
        [AC_MSG_RESULT([no])])
@@ -381,7 +374,7 @@ AC_CACHE_CHECK([for location of SCCS get command], [make_cv_path_sccs_get], [
         [make_cv_path_sccs_get=get])
 ])
 AC_DEFINE_UNQUOTED([SCCS_GET], ["$make_cv_path_sccs_get"],
-	           [Define to the name of the SCCS 'get' command.])
+                   [Define to the name of the SCCS 'get' command.])
 
 ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
 AS_IF([(/usr/sccs/admin -n s.conftest || admin -n s.conftest) >/dev/null 2>&1 &&
@@ -511,7 +504,7 @@ AS_IF([test "x$make_cv_load" = xno && test "x$user_load" = xyes],
 
 # Specify what files are to be created.
 AC_CONFIG_FILES([Makefile glob/Makefile po/Makefile.in config/Makefile \
-                 doc/Makefile w32/Makefile])
+                 doc/Makefile w32/Makefile tests/config-flags.pm])
 
 # OK, do it!
 

configure.bat

@@ -1,5 +1,5 @@
 @echo off
-rem Copyright (C) 1994-2012 Free Software Foundation, Inc.
+rem Copyright (C) 1994-2014 Free Software Foundation, Inc.
 rem This file is part of GNU Make.
 rem
 rem GNU Make is free software; you can redistribute it and/or modify it under

debug.h

@@ -1,5 +1,5 @@
 /* Debugging macros and interface.
-Copyright (C) 1999-2012 Free Software Foundation, Inc.
+Copyright (C) 1999-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

default.c

@@ -1,5 +1,5 @@
 /* Data base of default implicit rules for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,10 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
+
+#include <assert.h>
+
 #include "filedef.h"
 #include "variable.h"
 #include "rule.h"
@@ -35,9 +38,11 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 static char default_suffixes[]
 #ifdef VMS
-  = ".exe .olb .ln .obj .c .cxx .cc .pas .p .for .f .r .y .l .mar \
-.s .ss .i .ii .mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
-.w .ch .cweb .web .com .sh .elc .el";
+  /* VMS should include all UNIX/POSIX + some VMS extensions */
+  = ".out .exe .a .olb .hlb .tlb .mlb .ln .o .obj .c .cxx .cc .cpp .pas .p \
+.for .f .r .y .l .ym .yl .mar .s .ss .i .ii .mod .sym .def .h .info .dvi \
+.tex .texinfo .texi .txinfo .mem .hlp .brn .rnh .rno .rnt .rnx .w .ch .cweb \
+.web .com .sh .elc .el";
 #elif defined(__EMX__)
   = ".out .a .ln .o .c .cc .C .cpp .p .f .F .m .r .y .l .ym .yl .s .S \
 .mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
@@ -50,19 +55,35 @@ static char default_suffixes[]
 
 static struct pspec default_pattern_rules[] =
   {
+#ifdef VMS
     { "(%)", "%",
+        "@if f$$search(\"$@\") .eqs. \"\" then $(LIBRARY)/CREATE/"
+         "$(or "
+          "$(patsubst %,TEXT,$(filter %.tlb %.TLB,$@)),"
+          "$(patsubst %,HELP,$(filter %.hlb %.HLB,$@)),"
+          "$(patsubst %,MACRO,$(filter %.mlb %.MLB,$@)),"
+          "$(and "
+           "$(patsubst %,SHARE,$(filter %.olb %.OLB,$@)),"
+           "$(patsubst %,SHARE,$(filter %.exe %.EXE,$<))),"
+          "OBJECT)"
+         " $@\n"
         "$(AR) $(ARFLAGS) $@ $<" },
 
+#else
+    { "(%)", "%",
+        "$(AR) $(ARFLAGS) $@ $<" },
+#endif
     /* The X.out rules are only in BSD's default set because
        BSD Make has no null-suffix rules, so 'foo.out' and
        'foo' are the same thing.  */
 #ifdef VMS
     { "%.exe", "%",
-        "copy $< $@" },
-#else
+        "$(CP) $< $@" },
+
+#endif
     { "%.out", "%",
         "@rm -f $@ \n cp $< $@" },
-#endif
+
     /* Syntax is "ctangle foo.w foo.ch foo.c".  */
     { "%.c", "%.w %.ch",
         "$(CTANGLE) $^ $@" },
@@ -75,18 +96,20 @@ static struct pspec default_pattern_rules[] =
 static struct pspec default_terminal_rules[] =
   {
 #ifdef VMS
+
     /* RCS.  */
     { "%", "%$$5lv", /* Multinet style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
     { "%", "[.$$rcs]%$$5lv", /* Multinet style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
     { "%", "%_v", /* Normal style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
     { "%", "[.rcs]%_v", /* Normal style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
+        "if f$$search(\"$@\") .nes. \"\" then +$(CHECKOUT,v)" },
 
     /* SCCS.  */
         /* ain't no SCCS on vms */
+
 #else
     /* RCS.  */
     { "%", "%,v",
@@ -105,7 +128,7 @@ static struct pspec default_terminal_rules[] =
     { 0, 0, 0 }
   };
 
-static char *default_suffix_rules[] =
+static const char *default_suffix_rules[] =
   {
 #ifdef VMS
     ".obj.exe",
@@ -146,6 +169,8 @@ static char *default_suffix_rules[] =
     "$(COMPILE.c)/noprep/noobj/machine /list=$@ $<",
     ".c.obj",
     "$(COMPILE.c) /obj=$@ $<",
+    ".c.o",
+    "$(COMPILE.c) /obj=$@ $<",
     ".cc.ii",
     "$(COMPILE.cc)/prep /list=$@ $<",
     ".cc.ss",
@@ -154,12 +179,20 @@ static char *default_suffix_rules[] =
     "$(COMPILE.cc)/noprep/noobj/machine /list=$@ $<",
     ".cc.obj",
     "$(COMPILE.cc) /obj=$@ $<",
+    ".cc.o",
+    "$(COMPILE.cc) /obj=$@ $<",
     ".cxx.obj",
     "$(COMPILE.cxx) /obj=$@ $<",
+    ".cxx.o",
+    "$(COMPILE.cxx) /obj=$@ $<",
     ".for.obj",
     "$(COMPILE.for) /obj=$@ $<",
+    ".for.o",
+    "$(COMPILE.for) /obj=$@ $<",
     ".pas.obj",
     "$(COMPILE.pas) /obj=$@ $<",
+    ".pas.o",
+    "$(COMPILE.pas) /obj=$@ $<",
 
     ".y.c",
     "$(YACC.y) $< \n rename y_tab.c $@",
@@ -319,7 +352,8 @@ static const char *default_variables[] =
 #ifdef __VAX
     "ARCH", "VAX",
 #endif
-    "AR", "library/obj",
+    "AR", "library",
+    "LIBRARY", "library",
     "ARFLAGS", "/replace",
     "AS", "macro",
     "MACRO", "macro",
@@ -329,15 +363,21 @@ static const char *default_variables[] =
     "CC", "cc",
 #endif
     "CD", "builtin_cd",
-    "MAKE", "make",
-    "ECHO", "write sys$$output \"",
+    "ECHO", "builtin_echo",
 #ifdef GCC_IS_NATIVE
     "C++", "gcc/plus",
     "CXX", "gcc/plus",
 #else
     "C++", "cxx",
     "CXX", "cxx",
+#ifndef __ia64
     "CXXLD", "cxxlink",
+    "CXXLINK", "cxxlink",
+#else
+    /* CXXLINK is not used on VMS/IA64 */
+    "CXXLD", "link",
+    "CXXLINK", "link",
+#endif
 #endif
     "CO", "co",
     "CPP", "$(CC) /preprocess_only",
@@ -390,6 +430,7 @@ static const char *default_variables[] =
 
     "MV", "rename/new_version",
     "CP", "copy",
+    ".LIBPATTERNS", "%.olb lib%.a",
 
 #else /* !VMS */
 
@@ -520,11 +561,15 @@ static const char *default_variables[] =
     ".LIBPATTERNS", "lib%.a $(DJDIR)/lib/lib%.a",
 #elif defined(__APPLE__)
     ".LIBPATTERNS", "lib%.dylib lib%.a",
+#elif defined(__CYGWIN__) || defined(WINDOWS32)
+    ".LIBPATTERNS", "lib%.dll.a %.dll.a lib%.a %.lib lib%.dll %.dll",
 #else
     ".LIBPATTERNS", "lib%.so lib%.a",
 #endif
 
 #endif /* !VMS */
+    /* Make this assignment to avoid undefined variable warnings.  */
+    "GNUMAKEFLAGS", "",
     0, 0
   };
 
@@ -534,15 +579,19 @@ void
 set_default_suffixes (void)
 {
   suffix_file = enter_file (strcache_add (".SUFFIXES"));
+  suffix_file->builtin = 1;
 
   if (no_builtin_rules_flag)
     define_variable_cname ("SUFFIXES", "", o_default, 0);
   else
     {
-      char *p = default_suffixes;
-      suffix_file->deps = enter_prereqs(PARSE_FILE_SEQ (&p, struct dep, '\0',
-                                                        NULL, 0),
-                                        NULL);
+      struct dep *d;
+      const char *p = default_suffixes;
+      suffix_file->deps = enter_prereqs (PARSE_SIMPLE_SEQ ((char **)&p, struct dep),
+                                         NULL);
+      for (d = suffix_file->deps; d; d = d->next)
+        d->file->builtin = 1;
+
       define_variable_cname ("SUFFIXES", default_suffixes, o_default, 0);
     }
 }
@@ -555,7 +604,7 @@ set_default_suffixes (void)
 void
 install_default_suffix_rules (void)
 {
-  char **s;
+  const char **s;
 
   if (no_builtin_rules_flag)
     return;
@@ -563,15 +612,14 @@ install_default_suffix_rules (void)
   for (s = default_suffix_rules; *s != 0; s += 2)
     {
       struct file *f = enter_file (strcache_add (s[0]));
-      /* Don't clobber cmds given in a makefile if there were any.  */
-      if (f->cmds == 0)
-        {
-          f->cmds = xmalloc (sizeof (struct commands));
-          f->cmds->fileinfo.filenm = 0;
-          f->cmds->commands = s[1];
-          f->cmds->command_lines = 0;
-          f->cmds->recipe_prefix = RECIPEPREFIX_DEFAULT;
-        }
+      /* This function should run before any makefile is parsed.  */
+      assert (f->cmds == 0);
+      f->cmds = xmalloc (sizeof (struct commands));
+      f->cmds->fileinfo.filenm = 0;
+      f->cmds->commands = xstrdup (s[1]);
+      f->cmds->command_lines = 0;
+      f->cmds->recipe_prefix = RECIPEPREFIX_DEFAULT;
+      f->builtin = 1;
     }
 }
 
@@ -604,3 +652,12 @@ define_default_variables (void)
   for (s = default_variables; *s != 0; s += 2)
     define_variable (s[0], strlen (s[0]), s[1], o_default, 1);
 }
+
+void
+undefine_default_variables (void)
+{
+  const char **s;
+
+  for (s = default_variables; *s != 0; s += 2)
+    undefine_variable_global (s[0], strlen (s[0]), o_default);
+}

dep.h

@@ -1,5 +1,5 @@
 /* Definitions of dependency data structures for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -18,11 +18,11 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
    These flags are saved in the 'changed' field of each
    'struct dep' in the chain returned by 'read_all_makefiles'.  */
 
-#define RM_NO_DEFAULT_GOAL	(1 << 0) /* Do not set default goal.  */
-#define RM_INCLUDED		(1 << 1) /* Search makefile search path.  */
-#define RM_DONTCARE		(1 << 2) /* No error if it doesn't exist.  */
-#define RM_NO_TILDE		(1 << 3) /* Don't expand ~ in file name.  */
-#define RM_NOFLAG		0
+#define RM_NO_DEFAULT_GOAL      (1 << 0) /* Do not set default goal.  */
+#define RM_INCLUDED             (1 << 1) /* Search makefile search path.  */
+#define RM_DONTCARE             (1 << 2) /* No error if it doesn't exist.  */
+#define RM_NO_TILDE             (1 << 3) /* Don't expand ~ in file name.  */
+#define RM_NOFLAG               0
 
 /* Structure representing one dependency of a file.
    Each struct file's 'deps' points to a chain of these,
@@ -53,22 +53,23 @@ struct nameseq
     const char *name;
   };
 
-
-#define PARSEFS_NONE    (0x0000)
-#define PARSEFS_NOSTRIP (0x0001)
-#define PARSEFS_NOAR    (0x0002)
-#define PARSEFS_NOGLOB  (0x0004)
-#define PARSEFS_EXISTS  (0x0008)
-#define PARSEFS_NOCACHE (0x0010)
+#define PARSEFS_NONE    0x0000
+#define PARSEFS_NOSTRIP 0x0001
+#define PARSEFS_NOAR    0x0002
+#define PARSEFS_NOGLOB  0x0004
+#define PARSEFS_EXISTS  0x0008
+#define PARSEFS_NOCACHE 0x0010
 
 #define PARSE_FILE_SEQ(_s,_t,_c,_p,_f) \
             (_t *)parse_file_seq ((_s),sizeof (_t),(_c),(_p),(_f))
+#define PARSE_SIMPLE_SEQ(_s,_t) \
+            (_t *)parse_file_seq ((_s),sizeof (_t),MAP_NUL,NULL,PARSEFS_NONE)
 
 #ifdef VMS
 void *parse_file_seq ();
 #else
 void *parse_file_seq (char **stringp, unsigned int size,
-                      int stopchar, const char *prefix, int flags);
+                      int stopmap, const char *prefix, int flags);
 #endif
 
 char *tilde_expand (const char *name);
@@ -87,5 +88,5 @@ struct dep *copy_dep_chain (const struct dep *d);
 void free_dep_chain (struct dep *d);
 void free_ns_chain (struct nameseq *n);
 struct dep *read_all_makefiles (const char **makefiles);
-void eval_buffer (char *buffer);
-int update_goal_chain (struct dep *goals);
+void eval_buffer (char *buffer, const gmk_floc *floc);
+enum update_status update_goal_chain (struct dep *goals);

dir.c

@@ -1,5 +1,5 @@
 /* Directory hashing for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,10 +14,12 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 #include "hash.h"
+#include "filedef.h"
+#include "dep.h"
 
-#ifdef	HAVE_DIRENT_H
+#ifdef  HAVE_DIRENT_H
 # include <dirent.h>
 # define NAMLEN(dirent) strlen((dirent)->d_name)
 # ifdef VMS
@@ -84,21 +86,21 @@ dosify (const char *filename)
   df = dos_filename;
 
   /* First, transform the name part.  */
-  for (i = 0; *filename != '\0' && i < 8 && *filename != '.'; ++i)
+  for (i = 0; i < 8 && ! STOP_SET (*filename, MAP_DOT|MAP_NUL); ++i)
     *df++ = tolower ((unsigned char)*filename++);
 
   /* Now skip to the next dot.  */
-  while (*filename != '\0' && *filename != '.')
+  while (! STOP_SET (*filename, MAP_DOT|MAP_NUL))
     ++filename;
   if (*filename != '\0')
     {
       *df++ = *filename++;
-      for (i = 0; *filename != '\0' && i < 3 && *filename != '.'; ++i)
-	*df++ = tolower ((unsigned char)*filename++);
+      for (i = 0; i < 3 && ! STOP_SET (*filename, MAP_DOT|MAP_NUL); ++i)
+        *df++ = tolower ((unsigned char)*filename++);
     }
 
   /* Look for more dots.  */
-  while (*filename != '\0' && *filename != '.')
+  while (! STOP_SET (*filename, MAP_DOT|MAP_NUL))
     ++filename;
   if (*filename == '.')
     return filename;
@@ -144,11 +146,11 @@ static int
 vms_hash (const char *name)
 {
   int h = 0;
-  int g;
 
   while (*name)
     {
       unsigned char uc = *name;
+      int g;
 #ifdef HAVE_CASE_INSENSITIVE_FS
       h = (h << 4) + (isupper (uc) ? tolower (uc) : uc);
 #else
@@ -157,10 +159,10 @@ vms_hash (const char *name)
       name++;
       g = h & 0xf0000000;
       if (g)
-	{
-	  h = h ^ (g >> 24);
-	  h = h ^ g;
-	}
+        {
+          h = h ^ (g >> 24);
+          h = h ^ g;
+        }
     }
   return h;
 }
@@ -177,7 +179,7 @@ vmsstat_dir (const char *name, struct stat *st)
   if (dir == 0)
     return -1;
   closedir (dir);
-  s = strchr (name, ':');	/* find device */
+  s = strchr (name, ':');       /* find device */
   if (s)
     {
       /* to keep the compiler happy we said "const char *name", now we cheat */
@@ -202,13 +204,13 @@ vmsstat_dir (const char *name, struct stat *st)
 
 /* Hash table of directories.  */
 
-#ifndef	DIRECTORY_BUCKETS
+#ifndef DIRECTORY_BUCKETS
 #define DIRECTORY_BUCKETS 199
 #endif
 
 struct directory_contents
   {
-    dev_t dev;			/* Device and inode numbers of this dir.  */
+    dev_t dev;                  /* Device and inode numbers of this dir.  */
 #ifdef WINDOWS32
     /* Inode means nothing on WINDOWS32. Even file key information is
      * unreliable because it is random per file open and undefined for remote
@@ -229,8 +231,8 @@ struct directory_contents
     ino_t ino;
 # endif
 #endif /* WINDOWS32 */
-    struct hash_table dirfiles;	/* Files in this directory.  */
-    DIR *dirstream;		/* Stream reading this directory.  */
+    struct hash_table dirfiles; /* Files in this directory.  */
+    DIR *dirstream;             /* Stream reading this directory.  */
   };
 
 static unsigned long
@@ -246,9 +248,9 @@ directory_contents_hash_1 (const void *key_0)
 #else
 # ifdef VMS
   hash = (((unsigned int) key->dev << 4)
-	  ^ ((unsigned int) key->ino[0]
-	     + (unsigned int) key->ino[1]
-	     + (unsigned int) key->ino[2]));
+          ^ ((unsigned int) key->ino[0]
+             + (unsigned int) key->ino[1]
+             + (unsigned int) key->ino[2]));
 # else
   hash = ((unsigned int) key->dev << 4) ^ (unsigned int) key->ino;
 # endif
@@ -269,9 +271,9 @@ directory_contents_hash_2 (const void *key_0)
 #else
 # ifdef VMS
   hash = (((unsigned int) key->dev << 4)
-	  ^ ~((unsigned int) key->ino[0]
-	      + (unsigned int) key->ino[1]
-	      + (unsigned int) key->ino[2]));
+          ^ ~((unsigned int) key->ino[0]
+              + (unsigned int) key->ino[1]
+              + (unsigned int) key->ino[2]));
 # else
   hash = ((unsigned int) key->dev << 4) ^ (unsigned int) ~key->ino;
 # endif
@@ -331,7 +333,7 @@ static struct hash_table directory_contents;
 
 struct directory
   {
-    const char *name;			/* Name of the directory.  */
+    const char *name;                   /* Name of the directory.  */
 
     /* The directory's contents.  This data may be shared by several
        entries in the hash table, which refer to the same directory
@@ -355,7 +357,7 @@ static int
 directory_hash_cmp (const void *x, const void *y)
 {
   return_ISTRING_COMPARE (((const struct directory *) x)->name,
-			  ((const struct directory *) y)->name);
+                          ((const struct directory *) y)->name);
 }
 
 /* Table of directories hashed by name.  */
@@ -372,9 +374,9 @@ static unsigned int open_directories = 0;
 
 struct dirfile
   {
-    const char *name;		/* Name of the file.  */
+    const char *name;           /* Name of the file.  */
     short length;
-    short impossible;		/* This file is impossible.  */
+    short impossible;           /* This file is impossible.  */
   };
 
 static unsigned long
@@ -400,7 +402,7 @@ dirfile_hash_cmp (const void *xv, const void *yv)
   return_ISTRING_COMPARE (x->name, y->name);
 }
 
-#ifndef	DIRFILE_BUCKETS
+#ifndef DIRFILE_BUCKETS
 #define DIRFILE_BUCKETS 107
 #endif
 
@@ -413,19 +415,10 @@ static struct directory *find_directory (const char *name);
 static struct directory *
 find_directory (const char *name)
 {
-  const char *p;
   struct directory *dir;
   struct directory **dir_slot;
   struct directory dir_key;
-  int r;
-#ifdef WINDOWS32
-  char* w32_path;
-  char  fs_label[BUFSIZ];
-  char  fs_type[BUFSIZ];
-  unsigned long  fs_serno;
-  unsigned long  fs_flags;
-  unsigned long  fs_len;
-#endif
+
 #ifdef VMS
   if ((*name == '.') && (*(name+1) == 0))
     name = "[]";
@@ -439,20 +432,20 @@ find_directory (const char *name)
 
   if (HASH_VACANT (dir))
     {
-      struct stat st;
-
       /* The directory was not found.  Create a new entry for it.  */
+      const char *p = name + strlen (name);
+      struct stat st;
+      int r;
 
-      p = name + strlen (name);
       dir = xmalloc (sizeof (struct directory));
 #if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
-      dir->name = strcache_add_len (downcase(name), p - name);
+      dir->name = strcache_add_len (downcase (name), p - name);
 #else
       dir->name = strcache_add_len (name, p - name);
 #endif
       hash_insert_at (&directories, dir, dir_slot);
       /* The directory is not in the name hash table.
-	 Find its device and inode numbers, and look it up by them.  */
+         Find its device and inode numbers, and look it up by them.  */
 
 #ifdef VMS
       r = vmsstat_dir (name, &st);
@@ -479,96 +472,101 @@ find_directory (const char *name)
 
       if (r < 0)
         {
-	/* Couldn't stat the directory.  Mark this by
-	   setting the 'contents' member to a nil pointer.  */
-	  dir->contents = 0;
-	}
+        /* Couldn't stat the directory.  Mark this by
+           setting the 'contents' member to a nil pointer.  */
+          dir->contents = 0;
+        }
       else
-	{
-	  /* Search the contents hash table; device and inode are the key.  */
+        {
+          /* Search the contents hash table; device and inode are the key.  */
 
-	  struct directory_contents *dc;
-	  struct directory_contents **dc_slot;
-	  struct directory_contents dc_key;
-
-	  dc_key.dev = st.st_dev;
 #ifdef WINDOWS32
-	  dc_key.path_key = w32_path = w32ify (name, 1);
-	  dc_key.ctime = st.st_ctime;
+          char *w32_path;
+#endif
+          struct directory_contents *dc;
+          struct directory_contents **dc_slot;
+          struct directory_contents dc_key;
+
+          dc_key.dev = st.st_dev;
+#ifdef WINDOWS32
+          dc_key.path_key = w32_path = w32ify (name, 1);
+          dc_key.ctime = st.st_ctime;
 #else
 # ifdef VMS
-	  dc_key.ino[0] = st.st_ino[0];
-	  dc_key.ino[1] = st.st_ino[1];
-	  dc_key.ino[2] = st.st_ino[2];
+          dc_key.ino[0] = st.st_ino[0];
+          dc_key.ino[1] = st.st_ino[1];
+          dc_key.ino[2] = st.st_ino[2];
 # else
-	  dc_key.ino = st.st_ino;
+          dc_key.ino = st.st_ino;
 # endif
 #endif
-	  dc_slot = (struct directory_contents **) hash_find_slot (&directory_contents, &dc_key);
-	  dc = *dc_slot;
+          dc_slot = (struct directory_contents **) hash_find_slot (&directory_contents, &dc_key);
+          dc = *dc_slot;
 
-	  if (HASH_VACANT (dc))
-	    {
-	      /* Nope; this really is a directory we haven't seen before.  */
+          if (HASH_VACANT (dc))
+            {
+              /* Nope; this really is a directory we haven't seen before.  */
+#ifdef WINDOWS32
+              char  fs_label[BUFSIZ];
+              char  fs_type[BUFSIZ];
+              unsigned long  fs_serno;
+              unsigned long  fs_flags;
+              unsigned long  fs_len;
+#endif
+              dc = (struct directory_contents *)
+                xmalloc (sizeof (struct directory_contents));
 
-	      dc = (struct directory_contents *)
-		xmalloc (sizeof (struct directory_contents));
-
-	      /* Enter it in the contents hash table.  */
-	      dc->dev = st.st_dev;
+              /* Enter it in the contents hash table.  */
+              dc->dev = st.st_dev;
 #ifdef WINDOWS32
               dc->path_key = xstrdup (w32_path);
-	      dc->ctime = st.st_ctime;
+              dc->ctime = st.st_ctime;
               dc->mtime = st.st_mtime;
 
-              /*
-               * NTFS is the only WINDOWS32 filesystem that bumps mtime
-               * on a directory when files are added/deleted from
-               * a directory.
-               */
+              /* NTFS is the only WINDOWS32 filesystem that bumps mtime on a
+                 directory when files are added/deleted from a directory.  */
               w32_path[3] = '\0';
-              if (GetVolumeInformation(w32_path,
-                     fs_label, sizeof (fs_label),
-                     &fs_serno, &fs_len,
-                     &fs_flags, fs_type, sizeof (fs_type)) == FALSE)
+              if (GetVolumeInformation (w32_path, fs_label, sizeof (fs_label),
+                                        &fs_serno, &fs_len, &fs_flags, fs_type,
+                                        sizeof (fs_type)) == FALSE)
                 dc->fs_flags = FS_UNKNOWN;
-              else if (!strcmp(fs_type, "FAT"))
+              else if (!strcmp (fs_type, "FAT"))
                 dc->fs_flags = FS_FAT;
-              else if (!strcmp(fs_type, "NTFS"))
+              else if (!strcmp (fs_type, "NTFS"))
                 dc->fs_flags = FS_NTFS;
               else
                 dc->fs_flags = FS_UNKNOWN;
 #else
 # ifdef VMS
-	      dc->ino[0] = st.st_ino[0];
-	      dc->ino[1] = st.st_ino[1];
-	      dc->ino[2] = st.st_ino[2];
+              dc->ino[0] = st.st_ino[0];
+              dc->ino[1] = st.st_ino[1];
+              dc->ino[2] = st.st_ino[2];
 # else
-	      dc->ino = st.st_ino;
+              dc->ino = st.st_ino;
 # endif
 #endif /* WINDOWS32 */
-	      hash_insert_at (&directory_contents, dc, dc_slot);
-	      ENULLLOOP (dc->dirstream, opendir (name));
-	      if (dc->dirstream == 0)
+              hash_insert_at (&directory_contents, dc, dc_slot);
+              ENULLLOOP (dc->dirstream, opendir (name));
+              if (dc->dirstream == 0)
                 /* Couldn't open the directory.  Mark this by setting the
                    'files' member to a nil pointer.  */
                 dc->dirfiles.ht_vec = 0;
-	      else
-		{
-		  hash_init (&dc->dirfiles, DIRFILE_BUCKETS,
-			     dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
-		  /* Keep track of how many directories are open.  */
-		  ++open_directories;
-		  if (open_directories == MAX_OPEN_DIRECTORIES)
-		    /* We have too many directories open already.
-		       Read the entire directory and then close it.  */
-		    dir_contents_file_exists_p (dc, 0);
-		}
-	    }
+              else
+                {
+                  hash_init (&dc->dirfiles, DIRFILE_BUCKETS,
+                             dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
+                  /* Keep track of how many directories are open.  */
+                  ++open_directories;
+                  if (open_directories == MAX_OPEN_DIRECTORIES)
+                    /* We have too many directories open already.
+                       Read the entire directory and then close it.  */
+                    dir_contents_file_exists_p (dc, 0);
+                }
+            }
 
-	  /* Point the name-hashed entry for DIR at its contents data.  */
-	  dir->contents = dc;
-	}
+          /* Point the name-hashed entry for DIR at its contents data.  */
+          dir->contents = dc;
+        }
     }
 
   return dir;
@@ -581,7 +579,6 @@ static int
 dir_contents_file_exists_p (struct directory_contents *dir,
                             const char *filename)
 {
-  unsigned int hash;
   struct dirfile *df;
   struct dirent *d;
 #ifdef WINDOWS32
@@ -610,16 +607,15 @@ dir_contents_file_exists_p (struct directory_contents *dir,
   filename = vmsify (filename,0);
 #endif
 
-  hash = 0;
   if (filename != 0)
     {
       struct dirfile dirfile_key;
 
       if (*filename == '\0')
-	{
-	  /* Checking if the directory exists.  */
-	  return 1;
-	}
+        {
+          /* Checking if the directory exists.  */
+          return 1;
+        }
       dirfile_key.name = filename;
       dirfile_key.length = strlen (filename);
       df = hash_find_item (&dir->dirfiles, &dirfile_key);
@@ -639,32 +635,32 @@ dir_contents_file_exists_p (struct directory_contents *dir,
        * on directories (ugh!).
        */
       if (dir->path_key)
-	{
+        {
           if ((dir->fs_flags & FS_FAT) != 0)
-	    {
-	      dir->mtime = time ((time_t *) 0);
-	      rehash = 1;
-	    }
-	  else if (stat (dir->path_key, &st) == 0 && st.st_mtime > dir->mtime)
-	    {
-	      /* reset date stamp to show most recent re-process.  */
-	      dir->mtime = st.st_mtime;
-	      rehash = 1;
-	    }
+            {
+              dir->mtime = time ((time_t *) 0);
+              rehash = 1;
+            }
+          else if (stat (dir->path_key, &st) == 0 && st.st_mtime > dir->mtime)
+            {
+              /* reset date stamp to show most recent re-process.  */
+              dir->mtime = st.st_mtime;
+              rehash = 1;
+            }
 
           /* If it has been already read in, all done.  */
-	  if (!rehash)
-	    return 0;
+          if (!rehash)
+            return 0;
 
           /* make sure directory can still be opened; if not return.  */
           dir->dirstream = opendir (dir->path_key);
           if (!dir->dirstream)
             return 0;
-	}
+        }
       else
 #endif
-	/* The directory has been all read in.  */
-	return 0;
+        /* The directory has been all read in.  */
+        return 0;
     }
 
   while (1)
@@ -678,7 +674,7 @@ dir_contents_file_exists_p (struct directory_contents *dir,
       if (d == 0)
         {
           if (errno)
-            fatal (NILF, "INTERNAL: readdir: %s\n", strerror (errno));
+            pfatal_with_name ("INTERNAL: readdir");
           break;
         }
 
@@ -691,7 +687,7 @@ dir_contents_file_exists_p (struct directory_contents *dir,
       }
 #endif
       if (!REAL_DIR_ENTRY (d))
-	continue;
+        continue;
 
       len = NAMLEN (d);
       dirfile_key.name = d->d_name;
@@ -704,17 +700,17 @@ dir_contents_file_exists_p (struct directory_contents *dir,
        */
       if (! rehash || HASH_VACANT (*dirfile_slot))
 #endif
-	{
-	  df = xmalloc (sizeof (struct dirfile));
+        {
+          df = xmalloc (sizeof (struct dirfile));
 #if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
-          df->name = strcache_add_len (downcase(d->d_name), len);
+          df->name = strcache_add_len (downcase (d->d_name), len);
 #else
-	  df->name = strcache_add_len (d->d_name, len);
+          df->name = strcache_add_len (d->d_name, len);
 #endif
-	  df->length = len;
-	  df->impossible = 0;
-	  hash_insert_at (&dir->dirfiles, df, dirfile_slot);
-	}
+          df->length = len;
+          df->impossible = 0;
+          hash_insert_at (&dir->dirfiles, df, dirfile_slot);
+        }
       /* Check if the name matches the one we're searching for.  */
       if (filename != 0 && patheq (d->d_name, filename))
         return 1;
@@ -739,7 +735,7 @@ int
 dir_file_exists_p (const char *dirname, const char *filename)
 {
   return dir_contents_file_exists_p (find_directory (dirname)->contents,
-				     filename);
+                                     filename);
 }
 
 /* Return 1 if the file named NAME exists.  */
@@ -751,7 +747,7 @@ file_exists_p (const char *name)
   const char *dirname;
   const char *slash;
 
-#ifndef	NO_ARCHIVES
+#ifndef NO_ARCHIVES
   if (ar_name (name))
     return ar_member_date (name) != (time_t) -1;
 #endif
@@ -767,7 +763,7 @@ file_exists_p (const char *name)
 #ifdef HAVE_DOS_PATHS
   /* Forward and backslashes might be mixed.  We need the rightmost one.  */
   {
-    const char *bslash = strrchr(name, '\\');
+    const char *bslash = strrchr (name, '\\');
     if (!dirend || bslash > dirend)
       dirend = bslash;
     /* The case of "d:file".  */
@@ -792,8 +788,8 @@ file_exists_p (const char *name)
 #ifdef HAVE_DOS_PATHS
   /* d:/ and d: are *very* different...  */
       if (dirend < name + 3 && name[1] == ':' &&
-	  (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
-	dirend++;
+          (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+        dirend++;
 #endif
       p = alloca (dirend - name + 1);
       memcpy (p, name, dirend - name);
@@ -827,7 +823,7 @@ file_impossible (const char *filename)
 # ifdef HAVE_DOS_PATHS
   /* Forward and backslashes might be mixed.  We need the rightmost one.  */
   {
-    const char *bslash = strrchr(p, '\\');
+    const char *bslash = strrchr (p, '\\');
     if (!dirend || bslash > dirend)
       dirend = bslash;
     /* The case of "d:file".  */
@@ -847,21 +843,21 @@ file_impossible (const char *filename)
       const char *dirname;
       const char *slash = dirend;
       if (dirend == p)
-	dirname = "/";
+        dirname = "/";
       else
-	{
+        {
           char *cp;
 #ifdef HAVE_DOS_PATHS
-	  /* d:/ and d: are *very* different...  */
-	  if (dirend < p + 3 && p[1] == ':' &&
-	      (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
-	    dirend++;
+          /* d:/ and d: are *very* different...  */
+          if (dirend < p + 3 && p[1] == ':' &&
+              (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+            dirend++;
 #endif
-	  cp = alloca (dirend - p + 1);
-	  memcpy (cp, p, dirend - p);
-	  cp[dirend - p] = '\0';
+          cp = alloca (dirend - p + 1);
+          memcpy (cp, p, dirend - p);
+          cp[dirend - p] = '\0';
           dirname = cp;
-	}
+        }
       dir = find_directory (dirname);
       filename = p = slash + 1;
     }
@@ -874,7 +870,7 @@ file_impossible (const char *filename)
   if (dir->contents->dirfiles.ht_vec == 0)
     {
       hash_init (&dir->contents->dirfiles, DIRFILE_BUCKETS,
-		 dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
+                 dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp);
     }
 
   /* Make a new entry and put it in the table.  */
@@ -882,7 +878,7 @@ file_impossible (const char *filename)
   new = xmalloc (sizeof (struct dirfile));
   new->length = strlen (filename);
 #if defined(HAVE_CASE_INSENSITIVE_FS) && defined(VMS)
-  new->name = strcache_add_len (downcase(filename), new->length);
+  new->name = strcache_add_len (downcase (filename), new->length);
 #else
   new->name = strcache_add_len (filename, new->length);
 #endif
@@ -896,7 +892,6 @@ int
 file_impossible_p (const char *filename)
 {
   const char *dirend;
-  const char *p = filename;
   struct directory_contents *dir;
   struct dirfile *dirfile;
   struct dirfile dirfile_key;
@@ -910,7 +905,7 @@ file_impossible_p (const char *filename)
 #ifdef HAVE_DOS_PATHS
   /* Forward and backslashes might be mixed.  We need the rightmost one.  */
   {
-    const char *bslash = strrchr(filename, '\\');
+    const char *bslash = strrchr (filename, '\\');
     if (!dirend || bslash > dirend)
       dirend = bslash;
     /* The case of "d:file".  */
@@ -930,23 +925,23 @@ file_impossible_p (const char *filename)
       const char *dirname;
       const char *slash = dirend;
       if (dirend == filename)
-	dirname = "/";
+        dirname = "/";
       else
-	{
+        {
           char *cp;
 #ifdef HAVE_DOS_PATHS
-	  /* d:/ and d: are *very* different...  */
-	  if (dirend < filename + 3 && filename[1] == ':' &&
-	      (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
-	    dirend++;
+          /* d:/ and d: are *very* different...  */
+          if (dirend < filename + 3 && filename[1] == ':' &&
+              (*dirend == '/' || *dirend == '\\' || *dirend == ':'))
+            dirend++;
 #endif
-	  cp = alloca (dirend - filename + 1);
-	  memcpy (cp, p, dirend - p);
-	  cp[dirend - p] = '\0';
+          cp = alloca (dirend - filename + 1);
+          memcpy (cp, filename, dirend - filename);
+          cp[dirend - filename] = '\0';
           dirname = cp;
-	}
+        }
       dir = find_directory (dirname)->contents;
-      p = filename = slash + 1;
+      filename = slash + 1;
     }
 
   if (dir == 0 || dir->dirfiles.ht_vec == 0)
@@ -954,13 +949,13 @@ file_impossible_p (const char *filename)
     return 0;
 
 #ifdef __MSDOS__
-  filename = dosify (p);
+  filename = dosify (filename);
 #endif
 #ifdef HAVE_CASE_INSENSITIVE_FS
-  filename = downcase (p);
+  filename = downcase (filename);
 #endif
 #ifdef VMS
-  filename = vmsify (p, 1);
+  filename = vmsify (filename, 1);
 #endif
 
   dirfile_key.name = filename;
@@ -1001,80 +996,80 @@ print_dir_data_base (void)
     {
       struct directory *dir = *dir_slot;
       if (! HASH_VACANT (dir))
-	{
-	  if (dir->contents == 0)
-	    printf (_("# %s: could not be stat'd.\n"), dir->name);
-	  else if (dir->contents->dirfiles.ht_vec == 0)
-	    {
+        {
+          if (dir->contents == 0)
+            printf (_("# %s: could not be stat'd.\n"), dir->name);
+          else if (dir->contents->dirfiles.ht_vec == 0)
+            {
 #ifdef WINDOWS32
-	      printf (_("# %s (key %s, mtime %d): could not be opened.\n"),
-		      dir->name, dir->contents->path_key,dir->contents->mtime);
+              printf (_("# %s (key %s, mtime %d): could not be opened.\n"),
+                      dir->name, dir->contents->path_key,dir->contents->mtime);
 #else  /* WINDOWS32 */
 #ifdef VMS
-	      printf (_("# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"),
-		      dir->name, dir->contents->dev,
-		      dir->contents->ino[0], dir->contents->ino[1],
-		      dir->contents->ino[2]);
+              printf (_("# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"),
+                      dir->name, dir->contents->dev,
+                      dir->contents->ino[0], dir->contents->ino[1],
+                      dir->contents->ino[2]);
 #else
-	      printf (_("# %s (device %ld, inode %ld): could not be opened.\n"),
-		      dir->name, (long int) dir->contents->dev,
-		      (long int) dir->contents->ino);
+              printf (_("# %s (device %ld, inode %ld): could not be opened.\n"),
+                      dir->name, (long int) dir->contents->dev,
+                      (long int) dir->contents->ino);
 #endif
 #endif /* WINDOWS32 */
-	    }
-	  else
-	    {
-	      unsigned int f = 0;
-	      unsigned int im = 0;
-	      struct dirfile **files_slot;
-	      struct dirfile **files_end;
+            }
+          else
+            {
+              unsigned int f = 0;
+              unsigned int im = 0;
+              struct dirfile **files_slot;
+              struct dirfile **files_end;
 
-	      files_slot = (struct dirfile **) dir->contents->dirfiles.ht_vec;
-	      files_end = files_slot + dir->contents->dirfiles.ht_size;
-	      for ( ; files_slot < files_end; files_slot++)
-		{
-		  struct dirfile *df = *files_slot;
-		  if (! HASH_VACANT (df))
-		    {
-		      if (df->impossible)
-			++im;
-		      else
-			++f;
-		    }
-		}
+              files_slot = (struct dirfile **) dir->contents->dirfiles.ht_vec;
+              files_end = files_slot + dir->contents->dirfiles.ht_size;
+              for ( ; files_slot < files_end; files_slot++)
+                {
+                  struct dirfile *df = *files_slot;
+                  if (! HASH_VACANT (df))
+                    {
+                      if (df->impossible)
+                        ++im;
+                      else
+                        ++f;
+                    }
+                }
 #ifdef WINDOWS32
-	      printf (_("# %s (key %s, mtime %d): "),
-		      dir->name, dir->contents->path_key, dir->contents->mtime);
+              printf (_("# %s (key %s, mtime %d): "),
+                      dir->name, dir->contents->path_key, dir->contents->mtime);
 #else  /* WINDOWS32 */
 #ifdef VMS
-	      printf (_("# %s (device %d, inode [%d,%d,%d]): "),
-		      dir->name, dir->contents->dev,
-		      dir->contents->ino[0], dir->contents->ino[1],
-		      dir->contents->ino[2]);
+              printf (_("# %s (device %d, inode [%d,%d,%d]): "),
+                      dir->name, dir->contents->dev,
+                      dir->contents->ino[0], dir->contents->ino[1],
+                      dir->contents->ino[2]);
 #else
-	      printf (_("# %s (device %ld, inode %ld): "),
-		      dir->name,
-		      (long)dir->contents->dev, (long)dir->contents->ino);
+              printf (_("# %s (device %ld, inode %ld): "),
+                      dir->name,
+                      (long)dir->contents->dev, (long)dir->contents->ino);
 #endif
 #endif /* WINDOWS32 */
-	      if (f == 0)
-		fputs (_("No"), stdout);
-	      else
-		printf ("%u", f);
-	      fputs (_(" files, "), stdout);
-	      if (im == 0)
-		fputs (_("no"), stdout);
-	      else
-		printf ("%u", im);
-	      fputs (_(" impossibilities"), stdout);
-	      if (dir->contents->dirstream == 0)
-		puts (".");
-	      else
-		puts (_(" so far."));
-	      files += f;
-	      impossible += im;
-	    }
-	}
+              if (f == 0)
+                fputs (_("No"), stdout);
+              else
+                printf ("%u", f);
+              fputs (_(" files, "), stdout);
+              if (im == 0)
+                fputs (_("no"), stdout);
+              else
+                printf ("%u", im);
+              fputs (_(" impossibilities"), stdout);
+              if (dir->contents->dirstream == 0)
+                puts (".");
+              else
+                puts (_(" so far."));
+              files += f;
+              impossible += im;
+            }
+        }
     }
 
   fputs ("\n# ", stdout);
@@ -1143,52 +1138,48 @@ read_dirstream (__ptr_t stream)
     {
       struct dirfile *df = *ds->dirfile_slot++;
       if (! HASH_VACANT (df) && !df->impossible)
-	{
-	  /* The glob interface wants a 'struct dirent', so mock one up.  */
-	  struct dirent *d;
-	  unsigned int len = df->length + 1;
+        {
+          /* The glob interface wants a 'struct dirent', so mock one up.  */
+          struct dirent *d;
+          unsigned int len = df->length + 1;
           unsigned int sz = sizeof (*d) - sizeof (d->d_name) + len;
-	  if (sz > bufsz)
-	    {
-	      bufsz *= 2;
-	      if (sz > bufsz)
-		bufsz = sz;
-	      buf = xrealloc (buf, bufsz);
-	    }
-	  d = (struct dirent *) buf;
+          if (sz > bufsz)
+            {
+              bufsz *= 2;
+              if (sz > bufsz)
+                bufsz = sz;
+              buf = xrealloc (buf, bufsz);
+            }
+          d = (struct dirent *) buf;
 #ifdef __MINGW32__
 # if __MINGW32_MAJOR_VERSION < 3 || (__MINGW32_MAJOR_VERSION == 3 && \
-				     __MINGW32_MINOR_VERSION == 0)
-	  d->d_name = xmalloc(len);
+                                     __MINGW32_MINOR_VERSION == 0)
+          d->d_name = xmalloc (len);
 # endif
 #endif
-	  FAKE_DIR_ENTRY (d);
+          FAKE_DIR_ENTRY (d);
 #ifdef _DIRENT_HAVE_D_NAMLEN
-	  d->d_namlen = len - 1;
+          d->d_namlen = len - 1;
 #endif
 #ifdef _DIRENT_HAVE_D_TYPE
-	  d->d_type = DT_UNKNOWN;
+          d->d_type = DT_UNKNOWN;
 #endif
-	  memcpy (d->d_name, df->name, len);
-	  return d;
-	}
+          memcpy (d->d_name, df->name, len);
+          return d;
+        }
     }
 
   return 0;
 }
 
-static void
-ansi_free (void *p)
-{
-  if (p)
-    free(p);
-}
-
 /* On 64 bit ReliantUNIX (5.44 and above) in LFS mode, stat() is actually a
  * macro for stat64().  If stat is a macro, make a local wrapper function to
  * invoke it.
+ *
+ * On MS-Windows, stat() "succeeds" for foo/bar/. where foo/bar is a
+ * regular file; fix that here.
  */
-#ifndef stat
+#if !defined(stat) && !defined(WINDOWS32)
 # ifndef VMS
 int stat (const char *path, struct stat *sbuf);
 # endif
@@ -1198,6 +1189,23 @@ static int
 local_stat (const char *path, struct stat *buf)
 {
   int e;
+#ifdef WINDOWS32
+  size_t plen = strlen (path);
+
+  /* Make sure the parent of "." exists and is a directory, not a
+     file.  This is because 'stat' on Windows normalizes the argument
+     foo/. => foo without checking first that foo is a directory.  */
+  if (plen > 1 && path[plen - 1] == '.'
+      && (path[plen - 2] == '/' || path[plen - 2] == '\\'))
+    {
+      char parent[MAXPATHLEN];
+
+      strncpy (parent, path, plen - 2);
+      parent[plen - 2] = '\0';
+      if (stat (parent, buf) < 0 || !_S_ISDIR (buf->st_mode))
+        return -1;
+    }
+#endif
 
   EINTRLOOP (e, stat (path, buf));
   return e;
@@ -1209,7 +1217,7 @@ dir_setup_glob (glob_t *gl)
 {
   gl->gl_opendir = open_dirstream;
   gl->gl_readdir = read_dirstream;
-  gl->gl_closedir = ansi_free;
+  gl->gl_closedir = free;
   gl->gl_stat = local_stat;
   /* We don't bother setting gl_lstat, since glob never calls it.
      The slot is only there for compatibility with 4.4 BSD.  */
@@ -1219,8 +1227,8 @@ void
 hash_init_directories (void)
 {
   hash_init (&directories, DIRECTORY_BUCKETS,
-	     directory_hash_1, directory_hash_2, directory_hash_cmp);
+             directory_hash_1, directory_hash_2, directory_hash_cmp);
   hash_init (&directory_contents, DIRECTORY_BUCKETS,
-	     directory_contents_hash_1, directory_contents_hash_2,
+             directory_contents_hash_1, directory_contents_hash_2,
              directory_contents_hash_cmp);
 }

doc/.cvsignore

@@ -1,8 +0,0 @@
-Makefile Makefile.in
-version.texi fdl.texi make-stds.texi texinfo.tex
-make.info*
-make*.html
-make.aux make.cp make.cps make.fn make.fns make.ky
-make.pg make.toc make.tp make.vr make.log
-make.dvi make.ps make.pdf
-stamp-vti

doc/.gitignore

@@ -0,0 +1,22 @@
+manual/
+gendocs_template
+fdl.texi
+make-stds.texi
+stamp-vti
+version.texi
+make.info*
+make*.html
+make.aux
+make.cp
+make.cps
+make.dvi
+make.fn
+make.fns
+make.ky
+make.log
+make.pdf
+make.pg
+make.ps
+make.toc
+make.tp
+make.vr

doc/Makefile.am

@@ -1,5 +1,5 @@
 # -*-Makefile-*-, or close enough
-# Copyright (C) 2000-2012 Free Software Foundation, Inc.
+# Copyright (C) 2000-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -22,14 +22,3 @@ info_TEXINFOS =	make.texi
 make_TEXINFOS = fdl.texi make-stds.texi
 
 CLEANFILES = make*.html
-
-## ----------------------------- ##
-## Other documentation formats.  ##
-## ----------------------------- ##
-
-html: make_1.html
-
-make_1.html: $(info_TEXINFOS) $(make_TEXINFOS)
-	$(TEXI2HTML) $(TEXI2HTML_FLAGS) $(srcdir)/make.texi
-
-.PHONY: html

dosbuild.bat

@@ -1,5 +1,5 @@
 @echo off
-rem Copyright (C) 1998-2012 Free Software Foundation, Inc.
+rem Copyright (C) 1998-2014 Free Software Foundation, Inc.
 rem This file is part of GNU Make.
 rem
 rem GNU Make is free software; you can redistribute it and/or modify it under
@@ -20,6 +20,7 @@ echo Building Make for MSDOS
 rem Echo ON so they will see what is going on.
 @echo on
 gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g commands.c -o commands.o
+gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g output.c -o output.o
 gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g job.c -o job.o
 gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g dir.c -o dir.o
 gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g file.c -o file.o
@@ -51,7 +52,7 @@ ar rv libglob.a glob.o fnmatch.o
 @echo off
 cd ..
 echo commands.o > respf.$$$
-for %%f in (job dir file misc main read remake rule implicit default variable) do echo %%f.o >> respf.$$$
+for %%f in (job output dir file misc main read remake rule implicit default variable) do echo %%f.o >> respf.$$$
 for %%f in (expand function vpath hash strcache version ar arscan signame remote-stub getopt getopt1) do echo %%f.o >> respf.$$$
 echo glob/libglob.a >> respf.$$$
 rem gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g guile.c -o guile.o

expand.c

@@ -1,5 +1,5 @@
 /* Variable expansion functions for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 #include <assert.h>
 
@@ -26,7 +26,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* Initially, any errors reported when expanding strings will be reported
    against the file where the error appears.  */
-const struct floc **expanding_var = &reading_file;
+const gmk_floc **expanding_var = &reading_file;
 
 /* The next two describe the variable output buffer.
    This buffer is used to hold the variable-expansion of a line of the
@@ -61,8 +61,8 @@ variable_buffer_output (char *ptr, const char *string, unsigned int length)
     {
       unsigned int offset = ptr - variable_buffer;
       variable_buffer_length = (newlen + 100 > 2 * variable_buffer_length
-				? newlen + 100
-				: 2 * variable_buffer_length);
+                                ? newlen + 100
+                                : 2 * variable_buffer_length);
       variable_buffer = xrealloc (variable_buffer, variable_buffer_length);
       ptr = variable_buffer + offset;
     }
@@ -96,8 +96,8 @@ char *
 recursively_expand_for_file (struct variable *v, struct file *file)
 {
   char *value;
-  const struct floc *this_var;
-  const struct floc **saved_varp;
+  const gmk_floc *this_var;
+  const gmk_floc **saved_varp;
   struct variable_set_list *save = 0;
   int set_reading = 0;
 
@@ -121,9 +121,9 @@ recursively_expand_for_file (struct variable *v, struct file *file)
     {
       if (!v->exp_count)
         /* Expanding V causes infinite recursion.  Lose.  */
-        fatal (*expanding_var,
-               _("Recursive variable '%s' references itself (eventually)"),
-               v->name);
+        OS (fatal, *expanding_var,
+            _("Recursive variable '%s' references itself (eventually)"),
+            v->name);
       --v->exp_count;
     }
 
@@ -200,7 +200,7 @@ variable_expand_string (char *line, const char *string, long length)
   unsigned int line_offset;
 
   if (!line)
-    line = initialize_variable_output();
+    line = initialize_variable_output ();
   o = line;
   line_offset = line - variable_buffer;
 
@@ -220,118 +220,116 @@ variable_expand_string (char *line, const char *string, long length)
     {
       /* Copy all following uninteresting chars all at once to the
          variable output buffer, and skip them.  Uninteresting chars end
-	 at the next $ or the end of the input.  */
+         at the next $ or the end of the input.  */
 
       p1 = strchr (p, '$');
 
       o = variable_buffer_output (o, p, p1 != 0 ? (unsigned int)(p1 - p) : strlen (p) + 1);
 
       if (p1 == 0)
-	break;
+        break;
       p = p1 + 1;
 
       /* Dispatch on the char that follows the $.  */
 
       switch (*p)
-	{
-	case '$':
-	  /* $$ seen means output one $ to the variable output buffer.  */
-	  o = variable_buffer_output (o, p, 1);
-	  break;
+        {
+        case '$':
+          /* $$ seen means output one $ to the variable output buffer.  */
+          o = variable_buffer_output (o, p, 1);
+          break;
 
-	case '(':
-	case '{':
-	  /* $(...) or ${...} is the general case of substitution.  */
-	  {
-	    char openparen = *p;
-	    char closeparen = (openparen == '(') ? ')' : '}';
+        case '(':
+        case '{':
+          /* $(...) or ${...} is the general case of substitution.  */
+          {
+            char openparen = *p;
+            char closeparen = (openparen == '(') ? ')' : '}';
             const char *begp;
-	    const char *beg = p + 1;
-	    char *op;
+            const char *beg = p + 1;
+            char *op;
             char *abeg = NULL;
-	    const char *end, *colon;
+            const char *end, *colon;
 
-	    op = o;
-	    begp = p;
-	    if (handle_function (&op, &begp))
-	      {
-		o = op;
-		p = begp;
-		break;
-	      }
+            op = o;
+            begp = p;
+            if (handle_function (&op, &begp))
+              {
+                o = op;
+                p = begp;
+                break;
+              }
 
-	    /* Is there a variable reference inside the parens or braces?
-	       If so, expand it before expanding the entire reference.  */
+            /* Is there a variable reference inside the parens or braces?
+               If so, expand it before expanding the entire reference.  */
 
-	    end = strchr (beg, closeparen);
-	    if (end == 0)
+            end = strchr (beg, closeparen);
+            if (end == 0)
               /* Unterminated variable reference.  */
-              fatal (*expanding_var, _("unterminated variable reference"));
-	    p1 = lindex (beg, end, '$');
-	    if (p1 != 0)
-	      {
-		/* BEG now points past the opening paren or brace.
-		   Count parens or braces until it is matched.  */
-		int count = 0;
-		for (p = beg; *p != '\0'; ++p)
-		  {
-		    if (*p == openparen)
-		      ++count;
-		    else if (*p == closeparen && --count < 0)
-		      break;
-		  }
-		/* If COUNT is >= 0, there were unmatched opening parens
-		   or braces, so we go to the simple case of a variable name
-		   such as '$($(a)'.  */
-		if (count < 0)
-		  {
-		    abeg = expand_argument (beg, p); /* Expand the name.  */
-		    beg = abeg;
-		    end = strchr (beg, '\0');
-		  }
-	      }
-	    else
-	      /* Advance P to the end of this reference.  After we are
+              O (fatal, *expanding_var, _("unterminated variable reference"));
+            p1 = lindex (beg, end, '$');
+            if (p1 != 0)
+              {
+                /* BEG now points past the opening paren or brace.
+                   Count parens or braces until it is matched.  */
+                int count = 0;
+                for (p = beg; *p != '\0'; ++p)
+                  {
+                    if (*p == openparen)
+                      ++count;
+                    else if (*p == closeparen && --count < 0)
+                      break;
+                  }
+                /* If COUNT is >= 0, there were unmatched opening parens
+                   or braces, so we go to the simple case of a variable name
+                   such as '$($(a)'.  */
+                if (count < 0)
+                  {
+                    abeg = expand_argument (beg, p); /* Expand the name.  */
+                    beg = abeg;
+                    end = strchr (beg, '\0');
+                  }
+              }
+            else
+              /* Advance P to the end of this reference.  After we are
                  finished expanding this one, P will be incremented to
                  continue the scan.  */
-	      p = end;
+              p = end;
 
-	    /* This is not a reference to a built-in function and
-	       any variable references inside are now expanded.
-	       Is the resultant text a substitution reference?  */
+            /* This is not a reference to a built-in function and
+               any variable references inside are now expanded.
+               Is the resultant text a substitution reference?  */
 
-	    colon = lindex (beg, end, ':');
-	    if (colon)
-	      {
-		/* This looks like a substitution reference: $(FOO:A=B).  */
-		const char *subst_beg, *subst_end, *replace_beg, *replace_end;
+            colon = lindex (beg, end, ':');
+            if (colon)
+              {
+                /* This looks like a substitution reference: $(FOO:A=B).  */
+                const char *subst_beg = colon + 1;
+                const char *subst_end = lindex (subst_beg, end, '=');
+                if (subst_end == 0)
+                  /* There is no = in sight.  Punt on the substitution
+                     reference and treat this as a variable name containing
+                     a colon, in the code below.  */
+                  colon = 0;
+                else
+                  {
+                    const char *replace_beg = subst_end + 1;
+                    const char *replace_end = end;
 
-		subst_beg = colon + 1;
-		subst_end = lindex (subst_beg, end, '=');
-		if (subst_end == 0)
-		  /* There is no = in sight.  Punt on the substitution
-		     reference and treat this as a variable name containing
-		     a colon, in the code below.  */
-		  colon = 0;
-		else
-		  {
-		    replace_beg = subst_end + 1;
-		    replace_end = end;
-
-		    /* Extract the variable name before the colon
-		       and look up that variable.  */
-		    v = lookup_variable (beg, colon - beg);
-		    if (v == 0)
-		      warn_undefined (beg, colon - beg);
+                    /* Extract the variable name before the colon
+                       and look up that variable.  */
+                    v = lookup_variable (beg, colon - beg);
+                    if (v == 0)
+                      warn_undefined (beg, colon - beg);
 
                     /* If the variable is not empty, perform the
                        substitution.  */
-		    if (v != 0 && *v->value != '\0')
-		      {
-			char *pattern, *replace, *ppercent, *rpercent;
-			char *value = (v->recursive
+                    if (v != 0 && *v->value != '\0')
+                      {
+                        char *pattern, *replace, *ppercent, *rpercent;
+                        char *value = (v->recursive
                                        ? recursively_expand (v)
-				       : v->value);
+                                       : v->value);
 
                         /* Copy the pattern and the replacement.  Add in an
                            extra % at the beginning to use in case there
@@ -349,15 +347,15 @@ variable_expand_string (char *line, const char *string, long length)
 
                         /* Look for %.  Set the percent pointers properly
                            based on whether we find one or not.  */
-			ppercent = find_percent (pattern);
-			if (ppercent)
+                        ppercent = find_percent (pattern);
+                        if (ppercent)
                           {
                             ++ppercent;
                             rpercent = find_percent (replace);
                             if (rpercent)
                               ++rpercent;
                           }
-			else
+                        else
                           {
                             ppercent = pattern;
                             rpercent = replace;
@@ -368,38 +366,37 @@ variable_expand_string (char *line, const char *string, long length)
                         o = patsubst_expand_pat (o, value, pattern, replace,
                                                  ppercent, rpercent);
 
-			if (v->recursive)
-			  free (value);
-		      }
-		  }
-	      }
+                        if (v->recursive)
+                          free (value);
+                      }
+                  }
+              }
 
-	    if (colon == 0)
-	      /* This is an ordinary variable reference.
-		 Look up the value of the variable.  */
-		o = reference_variable (o, beg, end - beg);
+            if (colon == 0)
+              /* This is an ordinary variable reference.
+                 Look up the value of the variable.  */
+                o = reference_variable (o, beg, end - beg);
 
-	  if (abeg)
-	    free (abeg);
-	  }
-	  break;
+            free (abeg);
+          }
+          break;
 
-	case '\0':
-	  break;
+        case '\0':
+          break;
 
-	default:
-	  if (isblank ((unsigned char)p[-1]))
-	    break;
+        default:
+          if (isblank ((unsigned char)p[-1]))
+            break;
 
-	  /* A $ followed by a random char is a variable reference:
-	     $a is equivalent to $(a).  */
+          /* A $ followed by a random char is a variable reference:
+             $a is equivalent to $(a).  */
           o = reference_variable (o, p, 1);
 
-	  break;
-	}
+          break;
+        }
 
       if (*p == '\0')
-	break;
+        break;
 
       ++p;
     }
@@ -418,7 +415,7 @@ variable_expand_string (char *line, const char *string, long length)
 char *
 variable_expand (const char *line)
 {
-  return variable_expand_string(NULL, line, (long)-1);
+  return variable_expand_string (NULL, line, (long)-1);
 }
 
 /* Expand an argument for an expansion function.
@@ -434,7 +431,7 @@ expand_argument (const char *str, const char *end)
   char *r;
 
   if (str == end)
-    return xstrdup("");
+    return xstrdup ("");
 
   if (!end || *end == '\0')
     return allocated_variable_expand (str);
@@ -449,8 +446,7 @@ expand_argument (const char *str, const char *end)
 
   r = allocated_variable_expand (tmp);
 
-  if (alloc)
-    free (alloc);
+  free (alloc);
 
   return r;
 }
@@ -463,7 +459,7 @@ variable_expand_for_file (const char *line, struct file *file)
 {
   char *result;
   struct variable_set_list *savev;
-  const struct floc *savef;
+  const gmk_floc *savef;
 
   if (file == 0)
     return variable_expand (line);

file.c

@@ -1,5 +1,5 @@
 /* Target file management for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,12 +14,12 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 #include <assert.h>
 
-#include "dep.h"
 #include "filedef.h"
+#include "dep.h"
 #include "job.h"
 #include "commands.h"
 #include "variable.h"
@@ -54,11 +54,11 @@ static int
 file_hash_cmp (const void *x, const void *y)
 {
   return_ISTRING_COMPARE (((struct file const *) x)->hname,
-			  ((struct file const *) y)->hname);
+                          ((struct file const *) y)->hname);
 }
 
-#ifndef	FILE_BUCKETS
-#define FILE_BUCKETS	1007
+#ifndef FILE_BUCKETS
+#define FILE_BUCKETS    1007
 #endif
 static struct hash_table files;
 
@@ -103,20 +103,20 @@ lookup_file (const char *name)
 #endif
   while (name[0] == '.'
 #ifdef HAVE_DOS_PATHS
-	 && (name[1] == '/' || name[1] == '\\')
+         && (name[1] == '/' || name[1] == '\\')
 #else
-	 && name[1] == '/'
+         && name[1] == '/'
 #endif
-	 && name[2] != '\0')
+         && name[2] != '\0')
     {
       name += 2;
       while (*name == '/'
 #ifdef HAVE_DOS_PATHS
-	     || *name == '\\'
+             || *name == '\\'
 #endif
-	     )
-	/* Skip following slashes: ".//foo" is "foo", not "/foo".  */
-	++name;
+             )
+        /* Skip following slashes: ".//foo" is "foo", not "/foo".  */
+        ++name;
     }
 
   if (*name == '\0')
@@ -153,7 +153,7 @@ enter_file (const char *name)
   struct file file_key;
 
   assert (*name != '\0');
-  assert (strcache_iscached (name));
+  assert (! verify_flag || strcache_iscached (name));
 
 #if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
   if (*name != '.')
@@ -177,11 +177,14 @@ enter_file (const char *name)
   file_slot = (struct file **) hash_find_slot (&files, &file_key);
   f = *file_slot;
   if (! HASH_VACANT (f) && !f->double_colon)
-    return f;
+    {
+      f->builtin = 0;
+      return f;
+    }
 
   new = xcalloc (sizeof (struct file));
   new->name = new->hname = name;
-  new->update_status = -1;
+  new->update_status = us_none;
 
   if (HASH_VACANT (f))
     {
@@ -213,6 +216,7 @@ rehash_file (struct file *from_file, const char *to_hname)
   struct file *f;
 
   /* If it's already that name, we're done.  */
+  from_file->builtin = 0;
   file_key.hname = to_hname;
   if (! file_hash_cmp (from_file, &file_key))
     return;
@@ -257,22 +261,25 @@ rehash_file (struct file *from_file, const char *to_hname)
         to_file->cmds = from_file->cmds;
       else if (from_file->cmds != to_file->cmds)
         {
+          size_t l = strlen (from_file->name);
           /* We have two sets of commands.  We will go with the
              one given in the rule explicitly mentioning this name,
              but give a message to let the user know what's going on.  */
           if (to_file->cmds->fileinfo.filenm != 0)
             error (&from_file->cmds->fileinfo,
+                   l + strlen (to_file->cmds->fileinfo.filenm) + INTSTR_LENGTH,
                    _("Recipe was specified for file '%s' at %s:%lu,"),
                    from_file->name, to_file->cmds->fileinfo.filenm,
                    to_file->cmds->fileinfo.lineno);
           else
-            error (&from_file->cmds->fileinfo,
+            error (&from_file->cmds->fileinfo, l,
                    _("Recipe for file '%s' was found by implicit rule search,"),
                    from_file->name);
-          error (&from_file->cmds->fileinfo,
+          l += strlen (to_hname);
+          error (&from_file->cmds->fileinfo, l,
                  _("but '%s' is now considered the same file as '%s'."),
                  from_file->name, to_hname);
-          error (&from_file->cmds->fileinfo,
+          error (&from_file->cmds->fileinfo, l,
                  _("Recipe for '%s' will be ignored in favor of the one for '%s'."),
                  to_hname, from_file->name);
         }
@@ -293,13 +300,14 @@ rehash_file (struct file *from_file, const char *to_hname)
   merge_variable_set_lists (&to_file->variables, from_file->variables);
 
   if (to_file->double_colon && from_file->is_target && !from_file->double_colon)
-    fatal (NILF, _("can't rename single-colon '%s' to double-colon '%s'"),
-           from_file->name, to_hname);
+    OSS (fatal, NILF, _("can't rename single-colon '%s' to double-colon '%s'"),
+         from_file->name, to_hname);
   if (!to_file->double_colon  && from_file->double_colon)
     {
       if (to_file->is_target)
-        fatal (NILF, _("can't rename double-colon '%s' to single-colon '%s'"),
-               from_file->name, to_hname);
+        OSS (fatal, NILF,
+             _("can't rename double-colon '%s' to single-colon '%s'"),
+             from_file->name, to_hname);
       else
         to_file->double_colon = from_file->double_colon;
     }
@@ -318,9 +326,11 @@ rehash_file (struct file *from_file, const char *to_hname)
   MERGE (is_target);
   MERGE (cmd_target);
   MERGE (phony);
+  MERGE (loaded);
   MERGE (ignore_vpath);
 #undef MERGE
 
+  to_file->builtin = 0;
   from_file->renamed = to_file;
 }
 
@@ -363,52 +373,53 @@ remove_intermediates (int sig)
   for ( ; file_slot < file_end; file_slot++)
     if (! HASH_VACANT (*file_slot))
       {
-	struct file *f = *file_slot;
+        struct file *f = *file_slot;
         /* Is this file eligible for automatic deletion?
            Yes, IFF: it's marked intermediate, it's not secondary, it wasn't
            given on the command line, and it's either a -include makefile or
            it's not precious.  */
-	if (f->intermediate && (f->dontcare || !f->precious)
-	    && !f->secondary && !f->cmd_target)
-	  {
-	    int status;
-	    if (f->update_status == -1)
-	      /* If nothing would have created this file yet,
-		 don't print an "rm" command for it.  */
-	      continue;
-	    if (just_print_flag)
-	      status = 0;
-	    else
-	      {
-		status = unlink (f->name);
-		if (status < 0 && errno == ENOENT)
-		  continue;
-	      }
-	    if (!f->dontcare)
-	      {
-		if (sig)
-		  error (NILF, _("*** Deleting intermediate file '%s'"), f->name);
-		else
-		  {
-		    if (! doneany)
-		      DB (DB_BASIC, (_("Removing intermediate files...\n")));
-		    if (!silent_flag)
-		      {
-			if (! doneany)
-			  {
-			    fputs ("rm ", stdout);
-			    doneany = 1;
-			  }
-			else
-			  putchar (' ');
-			fputs (f->name, stdout);
-			fflush (stdout);
-		      }
-		  }
-		if (status < 0)
-		  perror_with_name ("unlink: ", f->name);
-	      }
-	  }
+        if (f->intermediate && (f->dontcare || !f->precious)
+            && !f->secondary && !f->cmd_target)
+          {
+            int status;
+            if (f->update_status == us_none)
+              /* If nothing would have created this file yet,
+                 don't print an "rm" command for it.  */
+              continue;
+            if (just_print_flag)
+              status = 0;
+            else
+              {
+                status = unlink (f->name);
+                if (status < 0 && errno == ENOENT)
+                  continue;
+              }
+            if (!f->dontcare)
+              {
+                if (sig)
+                  OS (error, NILF,
+                      _("*** Deleting intermediate file '%s'"), f->name);
+                else
+                  {
+                    if (! doneany)
+                      DB (DB_BASIC, (_("Removing intermediate files...\n")));
+                    if (!silent_flag)
+                      {
+                        if (! doneany)
+                          {
+                            fputs ("rm ", stdout);
+                            doneany = 1;
+                          }
+                        else
+                          putchar (' ');
+                        fputs (f->name, stdout);
+                        fflush (stdout);
+                      }
+                  }
+                if (status < 0)
+                  perror_with_name ("unlink: ", f->name);
+              }
+          }
       }
 
   if (doneany && !sig)
@@ -424,7 +435,8 @@ remove_intermediates (int sig)
 struct dep *
 split_prereqs (char *p)
 {
-  struct dep *new = PARSE_FILE_SEQ (&p, struct dep, '|', NULL, 0);
+  struct dep *new = PARSE_FILE_SEQ (&p, struct dep, MAP_PIPE, NULL,
+                                    PARSEFS_NONE);
 
   if (*p)
     {
@@ -433,7 +445,7 @@ split_prereqs (char *p)
       struct dep *ood;
 
       ++p;
-      ood = PARSE_FILE_SEQ (&p, struct dep, '\0', NULL, 0);
+      ood = PARSE_SIMPLE_SEQ (&p, struct dep);
 
       if (! new)
         new = ood;
@@ -690,23 +702,23 @@ snap_deps (void)
   for (f = lookup_file (".PRECIOUS"); f != 0; f = f->prev)
     for (d = f->deps; d != 0; d = d->next)
       for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	f2->precious = 1;
+        f2->precious = 1;
 
   for (f = lookup_file (".LOW_RESOLUTION_TIME"); f != 0; f = f->prev)
     for (d = f->deps; d != 0; d = d->next)
       for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	f2->low_resolution_time = 1;
+        f2->low_resolution_time = 1;
 
   for (f = lookup_file (".PHONY"); f != 0; f = f->prev)
     for (d = f->deps; d != 0; d = d->next)
       for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	{
-	  /* Mark this file as phony nonexistent target.  */
-	  f2->phony = 1;
+        {
+          /* Mark this file as phony nonexistent target.  */
+          f2->phony = 1;
           f2->is_target = 1;
-	  f2->last_mtime = NONEXISTENT_MTIME;
-	  f2->mtime_before_update = NONEXISTENT_MTIME;
-	}
+          f2->last_mtime = NONEXISTENT_MTIME;
+          f2->mtime_before_update = NONEXISTENT_MTIME;
+        }
 
   for (f = lookup_file (".INTERMEDIATE"); f != 0; f = f->prev)
     /* Mark .INTERMEDIATE deps as intermediate files.  */
@@ -738,22 +750,22 @@ snap_deps (void)
   if (f != 0 && f->is_target)
     {
       if (f->deps == 0)
-	ignore_errors_flag = 1;
+        ignore_errors_flag = 1;
       else
-	for (d = f->deps; d != 0; d = d->next)
-	  for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	    f2->command_flags |= COMMANDS_NOERROR;
+        for (d = f->deps; d != 0; d = d->next)
+          for (f2 = d->file; f2 != 0; f2 = f2->prev)
+            f2->command_flags |= COMMANDS_NOERROR;
     }
 
   f = lookup_file (".SILENT");
   if (f != 0 && f->is_target)
     {
       if (f->deps == 0)
-	silent_flag = 1;
+        silent_flag = 1;
       else
-	for (d = f->deps; d != 0; d = d->next)
-	  for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	    f2->command_flags |= COMMANDS_SILENT;
+        for (d = f->deps; d != 0; d = d->next)
+          for (f2 = d->file; f2 != 0; f2 = f2->prev)
+            f2->command_flags |= COMMANDS_SILENT;
     }
 
   f = lookup_file (".NOTPARALLEL");
@@ -793,13 +805,14 @@ file_timestamp_cons (const char *fname, time_t stamp, long int ns)
   FILE_TIMESTAMP ts = product + offset;
 
   if (! (s <= FILE_TIMESTAMP_S (ORDINARY_MTIME_MAX)
-	 && product <= ts && ts <= ORDINARY_MTIME_MAX))
+         && product <= ts && ts <= ORDINARY_MTIME_MAX))
     {
       char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
+      const char *f = fname ? fname : _("Current time");
       ts = s <= OLD_MTIME ? ORDINARY_MTIME_MIN : ORDINARY_MTIME_MAX;
       file_timestamp_sprintf (buf, ts);
-      error (NILF, _("%s: Timestamp out of range; substituting %s"),
-	     fname ? fname : _("Current time"), buf);
+      OSS (error, NILF,
+           _("%s: Timestamp out of range; substituting %s"), f, buf);
     }
 
   return ts;
@@ -823,10 +836,10 @@ file_timestamp_now (int *resolution)
     struct timespec timespec;
     if (clock_gettime (CLOCK_REALTIME, &timespec) == 0)
       {
-	r = 1;
-	s = timespec.tv_sec;
-	ns = timespec.tv_nsec;
-	goto got_time;
+        r = 1;
+        s = timespec.tv_sec;
+        ns = timespec.tv_nsec;
+        goto got_time;
       }
   }
 # endif
@@ -835,10 +848,10 @@ file_timestamp_now (int *resolution)
     struct timeval timeval;
     if (gettimeofday (&timeval, 0) == 0)
       {
-	r = 1000;
-	s = timeval.tv_sec;
-	ns = timeval.tv_usec * 1000;
-	goto got_time;
+        r = 1000;
+        s = timeval.tv_sec;
+        ns = timeval.tv_usec * 1000;
+        goto got_time;
       }
   }
 # endif
@@ -865,8 +878,8 @@ file_timestamp_sprintf (char *p, FILE_TIMESTAMP ts)
 
   if (tm)
     sprintf (p, "%04d-%02d-%02d %02d:%02d:%02d",
-	     tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-	     tm->tm_hour, tm->tm_min, tm->tm_sec);
+             tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+             tm->tm_hour, tm->tm_min, tm->tm_sec);
   else if (t < 0)
     sprintf (p, "%ld", (long) t);
   else
@@ -917,6 +930,13 @@ print_file (const void *item)
 {
   const struct file *f = item;
 
+  /* If we're not using builtin targets, don't show them.
+
+     Ideally we'd be able to delete them altogether but currently there's no
+     facility to ever delete a file once it's been added.  */
+  if (no_builtin_rules_flag && f->builtin)
+    return;
+
   putchar ('\n');
 
   if (f->cmds && f->cmds->recipe_prefix != cmd_prefix)
@@ -944,6 +964,8 @@ print_file (const void *item)
     puts (_("#  Command line target."));
   if (f->dontcare)
     puts (_("#  A default, MAKEFILES, or -include/sinclude makefile."));
+  if (f->builtin)
+    puts (_("#  Builtin rule"));
   puts (f->tried_implicit
         ? _("#  Implicit rule search has been done.")
         : _("#  Implicit rule search has not been done."));
@@ -956,7 +978,7 @@ print_file (const void *item)
       const struct dep *d;
       fputs (_("#  Also makes:"), stdout);
       for (d = f->also_make; d != 0; d = d->next)
-	printf (" %s", dep_name (d));
+        printf (" %s", dep_name (d));
       putchar ('\n');
     }
   if (f->last_mtime == UNKNOWN_MTIME)
@@ -984,25 +1006,20 @@ print_file (const void *item)
     case cs_not_started:
     case cs_finished:
       switch (f->update_status)
-	{
-	case -1:
-	  break;
-	case 0:
-	  puts (_("#  Successfully updated."));
-	  break;
-	case 1:
-	  assert (question_flag);
-	  puts (_("#  Needs to be updated (-q is set)."));
-	  break;
-	case 2:
-	  puts (_("#  Failed to be updated."));
-	  break;
-	default:
-	  puts (_("#  Invalid value in 'update_status' member!"));
-	  fflush (stdout);
-	  fflush (stderr);
-	  abort ();
-	}
+        {
+        case us_none:
+          break;
+        case us_success:
+          puts (_("#  Successfully updated."));
+          break;
+        case us_question:
+          assert (question_flag);
+          puts (_("#  Needs to be updated (-q is set)."));
+          break;
+        case us_failed:
+          puts (_("#  Failed to be updated."));
+          break;
+        }
       break;
     default:
       puts (_("#  Invalid value in 'command_state' member!"));
@@ -1035,9 +1052,10 @@ print_file_data_base (void)
 /* Verify the integrity of the data base of files.  */
 
 #define VERIFY_CACHED(_p,_n) \
-    do{\
-        if (_p->_n && _p->_n[0] && !strcache_iscached (_p->_n)) \
-          error (NULL, "%s: Field '%s' not cached: %s\n", _p->name, # _n, _p->_n); \
+    do{                                                                       \
+        if (_p->_n && _p->_n[0] && !strcache_iscached (_p->_n))               \
+          error (NULL, strlen (_p->name) + CSTRLEN (# _n) + strlen (_p->_n),  \
+                 _("%s: Field '%s' not cached: %s"), _p->name, # _n, _p->_n); \
     }while(0)
 
 static void

filedef.h

@@ -1,5 +1,5 @@
 /* Definition of target file data structures for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -26,18 +26,14 @@ struct file
     const char *name;
     const char *hname;          /* Hashed filename */
     const char *vpath;          /* VPATH/vpath pathname */
-    struct dep *deps;		/* all dependencies, including duplicates */
-    struct commands *cmds;	/* Commands to execute for this target.  */
-    int command_flags;		/* Flags OR'd in for cmds; see commands.h.  */
-    const char *stem;		/* Implicit stem, if an implicit
+    struct dep *deps;           /* all dependencies, including duplicates */
+    struct commands *cmds;      /* Commands to execute for this target.  */
+    const char *stem;           /* Implicit stem, if an implicit
                                    rule has been used */
-    struct dep *also_make;	/* Targets that are made by making this.  */
-    FILE_TIMESTAMP last_mtime;	/* File's modtime, if already known.  */
-    FILE_TIMESTAMP mtime_before_update;	/* File's modtime before any updating
-                                           has been performed.  */
-    struct file *prev;		/* Previous entry for same file name;
-				   used when there are multiple double-colon
-				   entries for the same file.  */
+    struct dep *also_make;      /* Targets that are made by making this.  */
+    struct file *prev;          /* Previous entry for same file name;
+                                   used when there are multiple double-colon
+                                   entries for the same file.  */
     struct file *last;          /* Last entry for the same file name.  */
 
     /* File that this file was renamed to.  After any time that a
@@ -59,33 +55,44 @@ struct file
        the same file.  Otherwise this is null.  */
     struct file *double_colon;
 
-    short int update_status;	/* Status of the last attempt to update,
-				   or -1 if none has been made.  */
-    enum cmd_state		/* State of the commands.  */
-      {		/* Note: It is important that cs_not_started be zero.  */
-	cs_not_started,		/* Not yet started.  */
-	cs_deps_running,	/* Dep commands running.  */
-	cs_running,		/* Commands running.  */
-	cs_finished		/* Commands finished.  */
+    FILE_TIMESTAMP last_mtime;  /* File's modtime, if already known.  */
+    FILE_TIMESTAMP mtime_before_update; /* File's modtime before any updating
+                                           has been performed.  */
+    int command_flags;          /* Flags OR'd in for cmds; see commands.h.  */
+    enum update_status          /* Status of the last attempt to update.  */
+      {
+        us_success = 0,         /* Successfully updated.  Must be 0!  */
+        us_none,                /* No attempt to update has been made.  */
+        us_question,            /* Needs to be updated (-q is is set).  */
+        us_failed               /* Update failed.  */
+      } update_status ENUM_BITFIELD (2);
+    enum cmd_state              /* State of the commands.  */
+      {
+        cs_not_started = 0,     /* Not yet started.  Must be 0!  */
+        cs_deps_running,        /* Dep commands running.  */
+        cs_running,             /* Commands running.  */
+        cs_finished             /* Commands finished.  */
       } command_state ENUM_BITFIELD (2);
 
-    unsigned int precious:1;	/* Non-0 means don't delete file on quit */
-    unsigned int low_resolution_time:1;	/* Nonzero if this file's time stamp
-					   has only one-second resolution.  */
+    unsigned int builtin:1;     /* True if the file is a builtin rule. */
+    unsigned int precious:1;    /* Non-0 means don't delete file on quit */
+    unsigned int loaded:1;      /* True if the file is a loaded object. */
+    unsigned int low_resolution_time:1; /* Nonzero if this file's time stamp
+                                           has only one-second resolution.  */
     unsigned int tried_implicit:1; /* Nonzero if have searched
-				      for implicit rule for making
-				      this file; don't search again.  */
-    unsigned int updating:1;	/* Nonzero while updating deps of this file */
-    unsigned int updated:1;	/* Nonzero if this file has been remade.  */
-    unsigned int is_target:1;	/* Nonzero if file is described as target.  */
-    unsigned int cmd_target:1;	/* Nonzero if file was given on cmd line.  */
-    unsigned int phony:1;	/* Nonzero if this is a phony file
-				   i.e., a prerequisite of .PHONY.  */
+                                      for implicit rule for making
+                                      this file; don't search again.  */
+    unsigned int updating:1;    /* Nonzero while updating deps of this file */
+    unsigned int updated:1;     /* Nonzero if this file has been remade.  */
+    unsigned int is_target:1;   /* Nonzero if file is described as target.  */
+    unsigned int cmd_target:1;  /* Nonzero if file was given on cmd line.  */
+    unsigned int phony:1;       /* Nonzero if this is a phony file
+                                   i.e., a prerequisite of .PHONY.  */
     unsigned int intermediate:1;/* Nonzero if this is an intermediate file.  */
     unsigned int secondary:1;   /* Nonzero means remove_intermediates should
                                    not delete it.  */
-    unsigned int dontcare:1;	/* Nonzero if no complaint is to be made if
-				   this target cannot be remade.  */
+    unsigned int dontcare:1;    /* Nonzero if no complaint is to be made if
+                                   this target cannot be remade.  */
     unsigned int ignore_vpath:1;/* Nonzero if we threw out VPATH name.  */
     unsigned int pat_searched:1;/* Nonzero if we already searched for
                                    pattern-specific variables.  */
@@ -131,12 +138,12 @@ void print_file_data_base (void);
 #define FILE_TIMESTAMP_LO_BITS (FILE_TIMESTAMP_HI_RES ? 30 : 0)
 
 #define FILE_TIMESTAMP_S(ts) (((ts) - ORDINARY_MTIME_MIN) \
-			      >> FILE_TIMESTAMP_LO_BITS)
+                              >> FILE_TIMESTAMP_LO_BITS)
 #define FILE_TIMESTAMP_NS(ts) ((int) (((ts) - ORDINARY_MTIME_MIN) \
-				      & ((1 << FILE_TIMESTAMP_LO_BITS) - 1)))
+                                      & ((1 << FILE_TIMESTAMP_LO_BITS) - 1)))
 
 /* Upper bound on length of string "YYYY-MM-DD HH:MM:SS.NNNNNNNNN"
-   representing a file timestamp.  The upper bound is not necessarily 19,
+   representing a file timestamp.  The upper bound is not necessarily 29,
    since the year might be less than -999 or greater than 9999.
 
    Subtract one for the sign bit if in case file timestamps can be negative;
@@ -184,8 +191,8 @@ FILE_TIMESTAMP f_mtime (struct file *file, int search);
 /* The smallest and largest ordinary timestamps.  */
 #define ORDINARY_MTIME_MIN (OLD_MTIME + 1)
 #define ORDINARY_MTIME_MAX ((FILE_TIMESTAMP_S (NEW_MTIME) \
-			     << FILE_TIMESTAMP_LO_BITS) \
-			    + ORDINARY_MTIME_MIN + FILE_TIMESTAMPS_PER_S - 1)
+                             << FILE_TIMESTAMP_LO_BITS) \
+                            + ORDINARY_MTIME_MIN + FILE_TIMESTAMPS_PER_S - 1)
 
 /* Modtime value to use for 'infinitely new'.  We used to get the current time
    from the system and use that whenever we wanted 'new'.  But that causes

getloadavg.c

@@ -1,5 +1,5 @@
 /* Get the system load averages.
-Copyright (C) 1985-2012 Free Software Foundation, Inc.
+Copyright (C) 1985-2014 Free Software Foundation, Inc.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
 terms of the GNU General Public License as published by the Free Software
@@ -985,7 +985,7 @@ getloadavg (double loadavg[], int nelem)
 #endif /* ! HAVE_GETLOADAVG */
 
 #ifdef TEST
-#include "make.h"
+#include "makeint.h"
 
 int
 main (int argc, char **argv)

getopt.c

@@ -3,7 +3,7 @@ NOTE: getopt is now part of the C library, so if you don't know what
 "Keep this file name-space clean" means, talk to drepper@gnu.org
 before changing it!
 
-Copyright (C) 1987-2012 Free Software Foundation, Inc.
+Copyright (C) 1987-2014 Free Software Foundation, Inc.
 
 NOTE: The canonical source of this file is maintained with the GNU C Library.
 Bugs can be reported to bug-glibc@gnu.org.

getopt.h

@@ -1,5 +1,5 @@
 /* Declarations for getopt.
-Copyright (C) 1989-2012 Free Software Foundation, Inc.
+Copyright (C) 1989-2014 Free Software Foundation, Inc.
 
 NOTE: The canonical source of this file is maintained with the GNU C Library.
 Bugs can be reported to bug-glibc@gnu.org.

getopt1.c

@@ -1,5 +1,5 @@
 /* getopt_long and getopt_long_only entry points for GNU getopt.
-Copyright (C) 1987-1994, 1996-2012 Free Software Foundation, Inc.
+Copyright (C) 1987-1994, 1996-2014 Free Software Foundation, Inc.
 
 NOTE: The canonical source of this file is maintained with the GNU C Library.
 Bugs can be reported to bug-glibc@gnu.org.

gettext.h

@@ -1,5 +1,5 @@
 /* Convenience header for conditional use of GNU <libintl.h>.
-Copyright (C) 1995-2012 Free Software Foundation, Inc.
+Copyright (C) 1995-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the

glob/.cvsignore

@@ -1,2 +0,0 @@
-Makefile Makefile.in
-.deps

glob/ChangeLog

@@ -1,3 +1,9 @@
+2013-10-20  Paul Smith  <psmith@gnu.org>
+
+	* glob.c (glob): Cherry-pick a471e96a5352a5f0bde6d32dd36d33524811a2b1
+	from git://sourceware.org/git/glibc.git to fix SV 18123,
+	https://sourceware.org/bugzilla/show_bug.cgi?id=10278
+
 2008-09-28  Juan Manuel Guerrero  <juan.guerrero@gmx.de>
 
 	* glob.c (my_realloc) [__DJGPP__]: Don't define, and don't

glob/glob.c

@@ -377,6 +377,11 @@ glob (pattern, flags, errfunc, pglob)
       return -1;
     }
 
+  /* POSIX requires all slashes to be matched.  This means that with
+     a trailing slash we must match only directories.  */
+  if (pattern[0] && pattern[strlen (pattern) - 1] == '/')
+    flags |= GLOB_ONLYDIR;
+
   if (flags & GLOB_BRACE)
     {
       const char *begin = strchr (pattern, '{');

glob/glob.h

@@ -56,7 +56,7 @@ typedef __SIZE_TYPE__ __size_t;
 #  else
 /* This is a guess.  */
 /*hb
- *	Conflicts with DECCs aready defined type __size_t.
+ *	Conflicts with DECCs already defined type __size_t.
  *	Defining an own type with a name beginning with '__' is no good.
  *	Anyway if DECC is used and __SIZE_T is defined then __size_t is
  *	already defined (and I hope it's exactly the one we need here).

gmk-default.scm

@@ -1,5 +1,5 @@
 ;; Contents of the (gnu make) Guile module
-;; Copyright (C) 2011-2012 Free Software Foundation, Inc.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
 ;; This file is part of GNU Make.
 ;;
 ;; GNU Make is free software; you can redistribute it and/or modify it under
@@ -45,10 +45,6 @@
     (walk x)
     (string-join (reverse! acc))))
 
-;; eval (GNU make eval) the input string S
-(define (gmk-eval s)
-  (gmk-expand (format #f "$(eval ~a)" (obj-to-str s))))
-
 ;; Return the value of the GNU make variable V
 (define (gmk-var v)
   (gmk-expand (format #f "$(~a)" (obj-to-str v))))

gnumake.h

@@ -0,0 +1,79 @@
+/* External interfaces usable by dynamic objects loaded into GNU Make.
+   --THIS API IS A "TECHNOLOGY PREVIEW" ONLY.  IT IS NOT A STABLE INTERFACE--
+
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef _GNUMAKE_H_
+#define _GNUMAKE_H_
+
+/* Specify the location of elements read from makefiles.  */
+typedef struct
+  {
+    const char *filenm;
+    unsigned long lineno;
+  } gmk_floc;
+
+typedef char *(*gmk_func_ptr)(const char *nm, unsigned int argc, char **argv);
+
+#ifdef _WIN32
+# ifdef GMK_BUILDING_MAKE
+#  define GMK_EXPORT  __declspec(dllexport)
+# else
+#  define GMK_EXPORT  __declspec(dllimport)
+# endif
+#else
+# define GMK_EXPORT
+#endif
+
+/* Free memory returned by the gmk_expand() function.  */
+GMK_EXPORT void gmk_free (char *str);
+
+/* Allocate memory in GNU make's context.  */
+GMK_EXPORT char *gmk_alloc (unsigned int len);
+
+/* Run $(eval ...) on the provided string BUFFER.  */
+GMK_EXPORT void gmk_eval (const char *buffer, const gmk_floc *floc);
+
+/* Run GNU make expansion on the provided string STR.
+   Returns an allocated buffer that the caller must free with gmk_free().  */
+GMK_EXPORT char *gmk_expand (const char *str);
+
+/* Register a new GNU make function NAME (maximum of 255 chars long).
+   When the function is expanded in the makefile, FUNC will be invoked with
+   the appropriate arguments.
+
+   The return value of FUNC must be either NULL, in which case it expands to
+   the empty string, or a pointer to the result of the expansion in a string
+   created by gmk_alloc().  GNU make will free the memory when it's done.
+
+   MIN_ARGS is the minimum number of arguments the function requires.
+   MAX_ARGS is the maximum number of arguments (or 0 if there's no maximum).
+   MIN_ARGS and MAX_ARGS may not exceed 255.
+
+   The FLAGS value may be GMK_FUNC_DEFAULT, or one or more of the following
+   flags OR'd together:
+
+     GMK_FUNC_NOEXPAND: the arguments to the function will be not be expanded
+                        before FUNC is called.
+*/
+GMK_EXPORT void gmk_add_function (const char *name, gmk_func_ptr func,
+                                  unsigned int min_args, unsigned int max_args,
+                                  unsigned int flags);
+
+#define GMK_FUNC_DEFAULT    0x00
+#define GMK_FUNC_NOEXPAND   0x01
+
+#endif  /* _GNUMAKE_H_ */

guile.c

@@ -1,5 +1,5 @@
 /* GNU Guile interface for GNU Make.
-Copyright (C) 2011-2012 Free Software Foundation, Inc.
+Copyright (C) 2011-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,13 +14,29 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
+
+#ifdef HAVE_GUILE
+
+#include "gnumake.h"
+
 #include "debug.h"
+#include "filedef.h"
 #include "dep.h"
 #include "variable.h"
 
 #include <libguile.h>
 
+/* Pre-2.0 versions of Guile don't have a typedef for gsubr function types.  */
+#if SCM_MAJOR_VERSION < 2
+# define GSUBR_TYPE         SCM (*) ()
+/* Guile 1.x doesn't really support i18n.  */
+# define EVAL_STRING(_s)    scm_c_eval_string (_s)
+#else
+# define GSUBR_TYPE         scm_t_subr
+# define EVAL_STRING(_s)    scm_eval_string (scm_from_utf8_string (_s))
+#endif
+
 static SCM make_mod = SCM_EOL;
 static SCM obj_to_str = SCM_EOL;
 
@@ -40,7 +56,7 @@ guile_expand_wrapper (SCM obj)
   char *res;
 
   DB (DB_BASIC, (_("guile: Expanding '%s'\n"), str));
-  res = allocated_variable_expand (str);
+  res = gmk_expand (str);
   ret = scm_from_locale_string (res);
 
   free (str);
@@ -49,6 +65,18 @@ guile_expand_wrapper (SCM obj)
   return ret;
 }
 
+/* Perform the GNU make eval function.  */
+static SCM
+guile_eval_wrapper (SCM obj)
+{
+  char *str = cvt_scm_to_str (obj);
+
+  DB (DB_BASIC, (_("guile: Evaluating '%s'\n"), str));
+  gmk_eval (str, 0);
+
+  return SCM_BOOL_F;
+}
+
 /* Invoked by scm_c_define_module(), in the context of the GNU make module.  */
 static void
 guile_define_module (void *data UNUSED)
@@ -57,7 +85,10 @@ guile_define_module (void *data UNUSED)
 #include "gmk-default.h"
 
   /* Register a subr for GNU make's eval capability.  */
-  scm_c_define_gsubr ("gmk-expand", 1, 0, 0, guile_expand_wrapper);
+  scm_c_define_gsubr ("gmk-expand", 1, 0, 0, (GSUBR_TYPE) guile_expand_wrapper);
+
+  /* Register a subr for GNU make's eval capability.  */
+  scm_c_define_gsubr ("gmk-eval", 1, 0, 0, (GSUBR_TYPE) guile_eval_wrapper);
 
   /* Define the rest of the module.  */
   scm_c_eval_string (GUILE_module_defn);
@@ -82,24 +113,26 @@ guile_init (void *arg UNUSED)
 static void *
 internal_guile_eval (void *arg)
 {
-  return cvt_scm_to_str (scm_c_eval_string (arg));
+  return cvt_scm_to_str (EVAL_STRING (arg));
 }
 
 /* This is the function registered with make  */
 static char *
-func_guile (char *o, char **argv, const char *funcname UNUSED)
+func_guile (const char *funcname UNUSED, unsigned int argc UNUSED, char **argv)
 {
-  if (argv[0] && argv[0][0] != '\0')
+  static int init = 0;
+
+  if (! init)
     {
-      char *str = scm_with_guile (internal_guile_eval, argv[0]);
-      if (str)
-        {
-          o = variable_buffer_output (o, str, strlen (str));
-          free (str);
-        }
+      /* Initialize the Guile interpreter.  */
+      scm_with_guile (guile_init, NULL);
+      init = 1;
     }
 
-  return o;
+  if (argv[0] && argv[0][0] != '\0')
+    return scm_with_guile (internal_guile_eval, argv[0]);
+
+  return NULL;
 }
 
 /* ----- Public interface ----- */
@@ -107,13 +140,20 @@ func_guile (char *o, char **argv, const char *funcname UNUSED)
 /* We could send the flocp to define_new_function(), but since guile is
    "kind of" built-in, that didn't seem so useful.  */
 int
-guile_gmake_setup (const struct floc *flocp UNUSED)
+guile_gmake_setup (const gmk_floc *flocp UNUSED)
 {
-  /* Initialize the Guile interpreter.  */
-  scm_with_guile (guile_init, NULL);
-
   /* Create a make function "guile".  */
-  define_new_function (NILF, "guile", 0, 1, 1, func_guile);
+  gmk_add_function ("guile", func_guile, 0, 1, GMK_FUNC_DEFAULT);
 
   return 1;
 }
+
+#else
+
+int
+guile_gmake_setup (const gmk_floc *flocp UNUSED)
+{
+  return 1;
+}
+
+#endif

hash.c

@@ -14,10 +14,10 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 #include "hash.h"
 
-#define	CALLOC(t, n) ((t *) calloc (sizeof (t), (n)))
+#define	CALLOC(t, n) ((t *) xcalloc (sizeof (t) * (n)))
 #define MALLOC(t, n) ((t *) xmalloc (sizeof (t) * (n)))
 #define REALLOC(o, t, n) ((t *) xrealloc ((o), sizeof (t) * (n)))
 #define CLONE(o, t, n) ((t *) memcpy (MALLOC (t, (n)), (o), sizeof (t) * (n)))
@@ -48,7 +48,7 @@ hash_init (struct hash_table *ht, unsigned long size,
     {
       fprintf (stderr, _("can't allocate %lu bytes for hash table: memory exhausted"),
 	       ht->ht_size * (unsigned long) sizeof (struct token *));
-      exit (1);
+      exit (MAKE_TROUBLE);
     }
 
   ht->ht_capacity = ht->ht_size - (ht->ht_size / 16); /* 93.75% loading factor */

implicit.c

@@ -1,5 +1,5 @@
 /* Implicit rule searching for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 #include "filedef.h"
 #include "rule.h"
 #include "dep.h"
@@ -217,13 +217,10 @@ pattern_search (struct file *file, int archive,
   struct file *int_file = 0;
 
   /* List of dependencies found recursively.  */
-  struct patdeps *deplist
-    = xmalloc (max_pattern_deps * sizeof (struct patdeps));
+  unsigned int max_deps = max_pattern_deps;
+  struct patdeps *deplist = xmalloc (max_deps * sizeof (struct patdeps));
   struct patdeps *pat = deplist;
 
-  /* All the prerequisites actually found for a rule, after expansion.  */
-  struct dep *deps;
-
   /* Names of possible dependencies are constructed in this buffer.  */
   char *depname = alloca (namelen + max_pattern_dep_length);
 
@@ -252,8 +249,6 @@ pattern_search (struct file *file, int archive,
      that is not just '%'.  */
   int specific_rule_matched = 0;
 
-  struct dep dep_simple;
-
   unsigned int ri;  /* uninit checks OK */
   struct rule *rule;
 
@@ -400,10 +395,10 @@ pattern_search (struct file *file, int archive,
              target in MATCHES.  If several targets of the same rule match,
              that rule will be in TRYRULES more than once.  */
           tryrules[nrules].rule = rule;
-	  tryrules[nrules].matches = ti;
+          tryrules[nrules].matches = ti;
           tryrules[nrules].stemlen = stemlen + (check_lastslash ? pathlen : 0);
           tryrules[nrules].order = nrules;
-	  tryrules[nrules].checked_lastslash = check_lastslash;
+          tryrules[nrules].checked_lastslash = check_lastslash;
           ++nrules;
         }
     }
@@ -535,11 +530,9 @@ pattern_search (struct file *file, int archive,
               /* If we don't need a second expansion, just replace the %.  */
               if (! dep->need_2nd_expansion)
                 {
-                  dep_simple = *dep;
-                  dep_simple.next = 0;
                   p = strchr (nptr, '%');
                   if (p == 0)
-                    dep_simple.name = nptr;
+                    strcpy (depname, nptr);
                   else
                     {
                       char *o = depname;
@@ -553,13 +546,19 @@ pattern_search (struct file *file, int archive,
                       memcpy (o, stem_str, stemlen);
                       o += stemlen;
                       strcpy (o, p + 1);
-                      dep_simple.name = strcache_add (depname);
                     }
-                  dl = &dep_simple;
+
+                  /* Parse the expanded string.  It might have wildcards.  */
+                  p = depname;
+                  dl = PARSE_SIMPLE_SEQ (&p, struct dep);
+                  for (d = dl; d != NULL; d = d->next)
+                    {
+                      ++deps_found;
+                      d->ignore_mtime = dep->ignore_mtime;
+                    }
 
                   /* We've used up this dep, so next time get a new one.  */
                   nptr = 0;
-                  ++deps_found;
                 }
 
               /* We have to perform second expansion on this prereq.  In an
@@ -575,6 +574,7 @@ pattern_search (struct file *file, int archive,
                 {
                   int add_dir = 0;
                   unsigned int len;
+                  struct dep **dptr;
 
                   nptr = get_next_word (nptr, &len);
                   if (nptr == 0)
@@ -617,6 +617,9 @@ pattern_search (struct file *file, int archive,
                         add_dir = 1;
                     }
 
+                  /* Set up for the next word.  */
+                  nptr += len;
+
                   /* Initialize and set file variables if we haven't already
                      done so. */
                   if (!file_vars_initialized)
@@ -635,32 +638,47 @@ pattern_search (struct file *file, int archive,
 
                   /* Perform the 2nd expansion.  */
                   p = variable_expand_for_file (depname, file);
+                  dptr = &dl;
 
-                  /* Parse the expanded string. */
-                  dl = PARSE_FILE_SEQ (&p, struct dep, order_only ? '\0' : '|',
-                                       add_dir ? dir : NULL, 0);
-
-                  for (d = dl; d != NULL; d = d->next)
+                  /* Parse the results into a deps list.  */
+                  do
                     {
-                      ++deps_found;
-                      if (order_only)
-                        d->ignore_mtime = 1;
-                    }
+                      /* Parse the expanded string. */
+                      struct dep *dp = PARSE_FILE_SEQ (&p, struct dep,
+                                                       order_only ? MAP_NUL : MAP_PIPE,
+                                                       add_dir ? dir : NULL, PARSEFS_NONE);
+                      *dptr = dp;
 
-                  /* Set up for the next word.  */
-                  nptr += len;
+                      for (d = dp; d != NULL; d = d->next)
+                        {
+                          ++deps_found;
+                          if (order_only)
+                            d->ignore_mtime = 1;
+                          dptr = &d->next;
+                        }
+
+                      /* If we stopped due to an order-only token, note it.  */
+                      if (*p == '|')
+                        {
+                          order_only = 1;
+                          ++p;
+                        }
+                    }
+                  while (*p != '\0');
                 }
 
               /* If there are more than max_pattern_deps prerequisites (due to
                  2nd expansion), reset it and realloc the arrays.  */
 
-              if (deps_found > max_pattern_deps)
+              if (deps_found > max_deps)
                 {
                   unsigned int l = pat - deplist;
+                  /* This might have changed due to recursion.  */
+                  max_pattern_deps = MAX(max_pattern_deps, deps_found);
+                  max_deps = max_pattern_deps;
                   deplist = xrealloc (deplist,
-                                      deps_found * sizeof (struct patdeps));
+                                      max_deps * sizeof (struct patdeps));
                   pat = deplist + l;
-                  max_pattern_deps = deps_found;
                 }
 
               /* Go through the nameseq and handle each as a prereq name.  */
@@ -760,8 +778,8 @@ pattern_search (struct file *file, int archive,
                           pat->pattern = int_file->name;
                           int_file->name = d->name;
                           pat->file = int_file;
-                          (pat++)->name = d->name;
                           int_file = 0;
+                          (pat++)->name = d->name;
                           continue;
                         }
 
@@ -782,8 +800,7 @@ pattern_search (struct file *file, int archive,
                 }
 
               /* Free the ns chain.  */
-              if (dl != &dep_simple)
-                free_dep_chain (dl);
+              free_dep_chain (dl);
 
               if (failed)
                 break;
@@ -800,10 +817,7 @@ pattern_search (struct file *file, int archive,
             /* This pattern rule does apply.  Stop looking for one.  */
             break;
 
-          /* This pattern rule does not apply. If some of its dependencies
-             succeeded, free the data structure describing them.  */
-          /* free_idep_chain (deps); */
-          deps = 0;
+          /* This pattern rule does not apply.  Keep looking.  */
         }
 
       /* If we found an applicable rule without intermediate files, don't try

job.h

@@ -1,5 +1,5 @@
 /* Definitions for managing subprocesses in GNU Make.
-Copyright (C) 1992-2012 Free Software Foundation, Inc.
+Copyright (C) 1992-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,8 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#ifndef SEEN_JOB_H
-#define SEEN_JOB_H
+#include "output.h"
 
 #ifdef HAVE_FCNTL_H
 # include <fcntl.h>
@@ -26,7 +25,11 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 /* How to set close-on-exec for a file descriptor.  */
 
 #if !defined F_SETFD
-# define CLOSE_ON_EXEC(_d)
+# ifdef WINDOWS32
+#  define CLOSE_ON_EXEC(_d)  process_noinherit(_d)
+# else
+#  define CLOSE_ON_EXEC(_d)
+# endif
 #else
 # ifndef FD_CLOEXEC
 #  define FD_CLOEXEC 1
@@ -34,32 +37,78 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 # define CLOSE_ON_EXEC(_d) (void) fcntl ((_d), F_SETFD, FD_CLOEXEC)
 #endif
 
+#ifdef NO_OUTPUT_SYNC
+# define RECORD_SYNC_MUTEX(m) \
+    O (error, NILF,                                                    \
+       _("-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."));
+#else
+# ifdef WINDOWS32
+/* For emulations in w32/compat/posixfcn.c.  */
+#  define F_GETFD 1
+#  define F_SETLKW 2
+/* Implementation note: None of the values of l_type below can be zero
+   -- they are compared with a static instance of the struct, so zero
+   means unknown/invalid, see w32/compat/posixfcn.c. */
+#  define F_WRLCK 1
+#  define F_UNLCK 2
+
+struct flock
+  {
+    short l_type;
+    short l_whence;
+    off_t l_start;
+    off_t l_len;
+    pid_t l_pid;
+  };
+
+/* This type is actually a HANDLE, but we want to avoid including
+   windows.h as much as possible.  */
+typedef intptr_t sync_handle_t;
+
+/* Public functions emulated/provided in posixfcn.c.  */
+int fcntl (intptr_t fd, int cmd, ...);
+intptr_t create_mutex (void);
+int same_stream (FILE *f1, FILE *f2);
+
+#  define RECORD_SYNC_MUTEX(m) record_sync_mutex(m)
+void record_sync_mutex (const char *str);
+void prepare_mutex_handle_string (intptr_t hdl);
+# else  /* !WINDOWS32 */
+
+typedef int sync_handle_t;      /* file descriptor */
+
+#  define RECORD_SYNC_MUTEX(m) (void)(m)
+
+# endif
+#endif  /* !NO_OUTPUT_SYNC */
+
 /* Structure describing a running or dead child process.  */
 
 struct child
   {
-    struct child *next;		/* Link in the chain.  */
+    struct child *next;         /* Link in the chain.  */
 
-    struct file *file;		/* File being remade.  */
+    struct file *file;          /* File being remade.  */
 
-    char **environment;		/* Environment for commands.  */
+    char **environment;         /* Environment for commands.  */
     char *sh_batch_file;        /* Script file for shell commands */
-    char **command_lines;	/* Array of variable-expanded cmd lines.  */
-    char *command_ptr;		/* Ptr into command_lines[command_line].  */
+    char **command_lines;       /* Array of variable-expanded cmd lines.  */
+    char *command_ptr;          /* Ptr into command_lines[command_line].  */
 
 #ifdef VMS
     char *comname;              /* Temporary command file name */
-    int efn;			/* Completion event flag number */
-    int cstatus;		/* Completion status */
+    int efn;                    /* Completion event flag number */
+    int cstatus;                /* Completion status */
 #endif
 
-    unsigned int command_line;	/* Index into command_lines.  */
-    pid_t pid;			/* Child process's ID number.  */
-    unsigned int remote:1;	/* Nonzero if executing remotely.  */
-    unsigned int noerror:1;	/* Nonzero if commands contained a '-'.  */
-    unsigned int good_stdin:1;	/* Nonzero if this child has a good stdin.  */
-    unsigned int deleted:1;	/* Nonzero if targets have been deleted.  */
-    unsigned int dontcare:1;    /* Saved dontcare flag.  */
+    unsigned int  command_line; /* Index into command_lines.  */
+    struct output output;       /* Output for this child.  */
+    pid_t         pid;          /* Child process's ID number.  */
+    unsigned int  remote:1;     /* Nonzero if executing remotely.  */
+    unsigned int  noerror:1;    /* Nonzero if commands contained a '-'.  */
+    unsigned int  good_stdin:1; /* Nonzero if this child has a good stdin.  */
+    unsigned int  deleted:1;    /* Nonzero if targets have been deleted.  */
+    unsigned int  dontcare:1;   /* Saved dontcare flag.  */
   };
 
 extern struct child *children;
@@ -73,17 +122,24 @@ char **construct_command_argv (char *line, char **restp, struct file *file,
                                int cmd_flags, char** batch_file);
 #ifdef VMS
 int child_execute_job (char *argv, struct child *child);
-#elif defined(__EMX__)
-int child_execute_job (int stdin_fd, int stdout_fd, char **argv, char **envp);
 #else
-void child_execute_job (int stdin_fd, int stdout_fd, char **argv, char **envp);
+# define FD_STDIN       (fileno (stdin))
+# define FD_STDOUT      (fileno (stdout))
+# define FD_STDERR      (fileno (stderr))
+# if defined(__EMX__)
+int child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                       char **argv, char **envp);
+# else
+void child_execute_job (int stdin_fd, int stdout_fd, int stderr_fd,
+                        char **argv, char **envp) __attribute__ ((noreturn));
+# endif
 #endif
 #ifdef _AMIGA
-void exec_command (char **argv);
+void exec_command (char **argv) __attribute__ ((noreturn));
 #elif defined(__EMX__)
 int exec_command (char **argv, char **envp);
 #else
-void exec_command (char **argv, char **envp);
+void exec_command (char **argv, char **envp) __attribute__ ((noreturn));
 #endif
 
 extern unsigned int job_slots_used;
@@ -92,14 +148,12 @@ void block_sigs (void);
 #ifdef POSIX
 void unblock_sigs (void);
 #else
-#ifdef	HAVE_SIGSETMASK
+#ifdef  HAVE_SIGSETMASK
 extern int fatal_signal_mask;
-#define	unblock_sigs()	sigsetmask (0)
+#define unblock_sigs()  sigsetmask (0)
 #else
-#define	unblock_sigs()
+#define unblock_sigs()
 #endif
 #endif
 
 extern unsigned int jobserver_tokens;
-
-#endif /* SEEN_JOB_H */

load.c

@@ -1,5 +1,5 @@
 /* Loading dynamic objects for GNU Make.
-Copyright (C) 2012 Free Software Foundation, Inc.
+Copyright (C) 2012-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 #if MAKE_LOAD
 
@@ -24,76 +24,135 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #include <dlfcn.h>
 #include <errno.h>
 
-#define SYMBOL_EXTENSION        "_gmake_setup"
-
-static void *global_dl = NULL;
+#define SYMBOL_EXTENSION        "_gmk_setup"
 
 #include "debug.h"
 #include "filedef.h"
 #include "variable.h"
 
-static int
-init_symbol (const struct floc *flocp, const char *ldname, load_func_t symp)
-{
-  int r;
-  const char *p;
-  int nmlen = strlen (ldname);
-  char *loaded = allocated_variable_expand("$(.LOADED)");
-
-  /* If it's already been loaded don't do it again.  */
-  p = strstr (loaded, ldname);
-  r = p && (p==loaded || p[-1]==' ') && (p[nmlen]=='\0' || p[nmlen]==' ');
-  free (loaded);
-  if (r)
-    return 1;
-
-  /* Now invoke the symbol.  */
-  r = (*symp) (flocp);
-
-  /* If it succeeded, add the symbol to the loaded variable.  */
-  if (r > 0)
-    do_variable_definition (flocp, ".LOADED", ldname, o_default, f_append, 0);
-
-  return r;
-}
-
-int
-load_file (const struct floc *flocp, const char *ldname, int noerror)
+/* Tru64 V4.0 does not have this flag */
+#ifndef RTLD_GLOBAL
+# define RTLD_GLOBAL 0
+#endif
+
+struct load_list
+  {
+    struct load_list *next;
+    const char *name;
+    void *dlp;
+  };
+
+static struct load_list *loaded_syms = NULL;
+
+static load_func_t
+load_object (const gmk_floc *flocp, int noerror,
+             const char *ldname, const char *symname)
 {
+  static void *global_dl = NULL;
   load_func_t symp;
-  const char *fp;
-  char *symname = NULL;
-  char *new = alloca (strlen (ldname) + CSTRLEN (SYMBOL_EXTENSION) + 1);
 
   if (! global_dl)
     {
       global_dl = dlopen (NULL, RTLD_NOW|RTLD_GLOBAL);
       if (! global_dl)
-        fatal (flocp, _("Failed to open global symbol table: %s"), dlerror());
+        {
+          const char *err = dlerror ();
+          OS (fatal, flocp, _("Failed to open global symbol table: %s"), err);
+        }
     }
 
-  /* If a symbol name was provided, use it.  */
-  fp = strchr (ldname, '(');
+  symp = (load_func_t) dlsym (global_dl, symname);
+  if (! symp)
+    {
+      struct load_list *new;
+      void *dlp = NULL;
+
+    /* If the path has no "/", try the current directory first.  */
+      if (! strchr (ldname, '/')
+#ifdef HAVE_DOS_PATHS
+          && ! strchr (ldname, '\\')
+#endif
+         )
+        dlp = dlopen (concat (2, "./", ldname), RTLD_LAZY|RTLD_GLOBAL);
+
+      /* If we haven't opened it yet, try the default search path.  */
+      if (! dlp)
+        dlp = dlopen (ldname, RTLD_LAZY|RTLD_GLOBAL);
+
+      /* Still no?  Then fail.  */
+      if (! dlp)
+        {
+          const char *err = dlerror ();
+          if (noerror)
+            DB (DB_BASIC, ("%s", err));
+          else
+            OS (error, flocp, "%s", err);
+          return NULL;
+        }
+
+      /* Assert that the GPL license symbol is defined.  */
+      symp = (load_func_t) dlsym (dlp, "plugin_is_GPL_compatible");
+      if (! symp)
+        OS (fatal, flocp,
+             _("Loaded object %s is not declared to be GPL compatible"),
+             ldname);
+
+      symp = (load_func_t) dlsym (dlp, symname);
+      if (! symp)
+        {
+          const char *err = dlerror ();
+          OSSS (fatal, flocp, _("Failed to load symbol %s from %s: %s"),
+                symname, ldname, err);
+        }
+
+      /* Add this symbol to a trivial lookup table.  This is not efficient but
+         it's highly unlikely we'll be loading lots of objects, and we only
+         need it to look them up on unload, if we rebuild them.  */
+      new = xmalloc (sizeof (struct load_list));
+      new->name = xstrdup (ldname);
+      new->dlp = dlp;
+      new->next = loaded_syms;
+      loaded_syms = new;
+    }
+
+  return symp;
+}
+
+int
+load_file (const gmk_floc *flocp, const char **ldname, int noerror)
+{
+  int nmlen = strlen (*ldname);
+  char *new = alloca (nmlen + CSTRLEN (SYMBOL_EXTENSION) + 1);
+  char *symname = NULL;
+  char *loaded;
+  const char *fp;
+  int r;
+  load_func_t symp;
+
+  /* Break the input into an object file name and a symbol name.  If no symbol
+     name was provided, compute one from the object file name.  */
+  fp = strchr (*ldname, '(');
   if (fp)
     {
       const char *ep;
 
-      /* If there's an open paren, see if there's a close paren: if so use
+      /* There's an open paren, so see if there's a close paren: if so use
          that as the symbol name.  We can't have whitespace: it would have
          been chopped up before this function is called.  */
       ep = strchr (fp+1, ')');
       if (ep && ep[1] == '\0')
         {
-          int l = fp - ldname;;
+          int l = fp - *ldname;;
 
           ++fp;
           if (fp == ep)
-            fatal (flocp, _("Empty symbol name for load: %s"), ldname);
+            OS (fatal, flocp, _("Empty symbol name for load: %s"), *ldname);
 
           /* Make a copy of the ldname part.  */
-          memcpy (new, ldname, l);
+          memcpy (new, *ldname, l);
           new[l] = '\0';
-          ldname = new;
+          *ldname = new;
+          nmlen = l;
 
           /* Make a copy of the symbol name part.  */
           symname = new + l + 1;
@@ -102,14 +161,39 @@ load_file (const struct floc *flocp, const char *ldname, int noerror)
         }
     }
 
+  /* Add this name to the string cache so it can be reused later.  */
+  *ldname = strcache_add (*ldname);
+
+  /* If this object has been loaded, we're done.  */
+  loaded = allocated_variable_expand ("$(.LOADED)");
+  fp = strstr (loaded, *ldname);
+  r = fp && (fp==loaded || fp[-1]==' ') && (fp[nmlen]=='\0' || fp[nmlen]==' ');
+  free (loaded);
+  if (r)
+    return 1;
+
   /* If we didn't find a symbol name yet, construct it from the ldname.  */
   if (! symname)
     {
       char *p = new;
 
-      fp = strrchr (ldname, '/');
+      fp = strrchr (*ldname, '/');
+#ifdef HAVE_DOS_PATHS
+      if (fp)
+        {
+          const char *fp2 = strchr (fp, '\\');
+
+          if (fp2 > fp)
+            fp = fp2;
+        }
+      else
+        fp = strrchr (*ldname, '\\');
+      /* The (improbable) case of d:foo.  */
+      if (fp && *fp && fp[1] == ':')
+        fp++;
+#endif
       if (!fp)
-        fp = ldname;
+        fp = *ldname;
       else
         ++fp;
       while (isalnum (*fp) || *fp == '_')
@@ -118,40 +202,54 @@ load_file (const struct floc *flocp, const char *ldname, int noerror)
       symname = new;
     }
 
-  DB (DB_VERBOSE, (_("Loading symbol %s from %s\n"), symname, ldname));
+  DB (DB_VERBOSE, (_("Loading symbol %s from %s\n"), symname, *ldname));
 
-  /* See if it's already defined.  */
-  symp = (load_func_t) dlsym (global_dl, symname);
-  if (! symp) {
-    void *dlp = dlopen (ldname, RTLD_LAZY|RTLD_GLOBAL);
-    if (! dlp)
+  /* Load it!  */
+  symp = load_object (flocp, noerror, *ldname, symname);
+  if (! symp)
+    return 0;
+
+  /* Invoke the symbol.  */
+  r = (*symp) (flocp);
+
+  /* If it succeeded, add the load file to the loaded variable.  */
+  if (r > 0)
+    do_variable_definition (flocp, ".LOADED", *ldname, o_default, f_append, 0);
+
+  return r;
+}
+
+void
+unload_file (const char *name)
+{
+  struct load_list *d;
+
+  for (d = loaded_syms; d != NULL; d = d->next)
+    if (streq (d->name, name) && d->dlp)
       {
-        if (noerror)
-          DB (DB_BASIC, ("%s", dlerror()));
-        else
-          error (flocp, "%s", dlerror());
-        return 0;
+        if (dlclose (d->dlp))
+          perror_with_name ("dlclose", d->name);
+        d->dlp = NULL;
+        break;
       }
-
-    symp = dlsym (dlp, symname);
-    if (! symp)
-      fatal (flocp, _("Failed to load symbol %s from %s: %s"),
-             symname, ldname, dlerror());
-  }
-
-  /* Invoke the symbol to initialize the loaded object.  */
-  return init_symbol(flocp, ldname, symp);
 }
 
 #else
 
 int
-load_file (const struct floc *flocp, const char *ldname, int noerror)
+load_file (const gmk_floc *flocp, const char **ldname, int noerror)
 {
   if (! noerror)
-    fatal (flocp, _("The 'load' operation is not supported on this platform."));
+    O (fatal, flocp,
+       _("The 'load' operation is not supported on this platform."));
 
   return 0;
 }
 
+void
+unload_file (const char *name)
+{
+  O (fatal, NILF, "INTERNAL: Cannot unload when load is not supported!");
+}
+
 #endif  /* MAKE_LOAD */

loadapi.c

@@ -0,0 +1,70 @@
+/* API for GNU Make dynamic objects.
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+
+#include "filedef.h"
+#include "variable.h"
+#include "dep.h"
+
+/* Allocate a buffer in our context, so we can free it.  */
+char *
+gmk_alloc (unsigned int len)
+{
+  return xmalloc (len);
+}
+
+/* Free a buffer returned by gmk_expand().  */
+void
+gmk_free (char *s)
+{
+  free (s);
+}
+
+/* Evaluate a buffer as make syntax.
+   Ideally eval_buffer() will take const char *, but not yet.  */
+void
+gmk_eval (const char *buffer, const gmk_floc *floc)
+{
+  /* Preserve existing variable buffer context.  */
+  char *pbuf;
+  unsigned int plen;
+  char *s;
+
+  install_variable_buffer (&pbuf, &plen);
+
+  s = xstrdup (buffer);
+  eval_buffer (s, floc);
+  free (s);
+
+  restore_variable_buffer (pbuf, plen);
+}
+
+/* Expand a string and return an allocated buffer.
+   Caller must call gmk_free() with this buffer.  */
+char *
+gmk_expand (const char *ref)
+{
+  return allocated_variable_expand (ref);
+}
+
+/* Register a function to be called from makefiles.  */
+void
+gmk_add_function (const char *name, gmk_func_ptr func,
+                  unsigned int min, unsigned int max, unsigned int flags)
+{
+  define_new_function (reading_file, name, min, max, flags, func);
+}

maintMakefile

@@ -1,9 +1,26 @@
 # Maintainer-only makefile segment.  This contains things that are relevant
-# only if you have the full copy of the GNU make sources from the CVS
+# only if you have the full copy of the GNU make sources from the Git
 # tree, not a dist copy.
 
+BUGLIST := bug-make@gnu.org
+
+# These are related to my personal setup.
+GPG_FINGERPRINT := 6338B6D4
+
+# SRCROOTDIR is just a handy location to keep source files in
+SRCROOTDIR ?= $(HOME)/src
+
+# Where the gnulib project has been locally cloned
+GNULIBDIR ?= $(SRCROOTDIR)/gnulib
+
+# Where to put the CVS checkout of the GNU web repository
+GNUWEBDIR ?= $(SRCROOTDIR)/gnu-www
+
+# Where to put the CVS checkout of the GNU make web repository
+MAKEWEBDIR ?= $(SRCROOTDIR)/make/make-web
+
 # We like mondo-warnings!
-AM_CFLAGS += -Wall -Wextra -Wdeclaration-after-statement -Wshadow -Wpointer-arith -Wbad-function-cast
+AM_CFLAGS += -Wall -Wwrite-strings -Wextra -Wdeclaration-after-statement -Wshadow -Wpointer-arith -Wbad-function-cast
 
 MAKE_MAINTAINER_MODE := -DMAKE_MAINTAINER_MODE
 AM_CPPFLAGS += $(MAKE_MAINTAINER_MODE)
@@ -83,50 +100,54 @@ DEP_FILES := $(wildcard $(DEPDIR)/*.Po)
 		< $$f; \
 	 done) > $@
 
-# Get rid of everything "else".
-#
-maintFILES = configure aclocal.m4 config.h.in Makefile.in stamp-h.in
+# Cleaning
 
-CVS-CLEAN-FILES +=	$(maintFILES) $(TEMPLATES) $(MTEMPLATES) NMakefile \
-			build.sh.in .deps .dep_segment ABOUT-NLS \
-			ansi2knr.*
+GIT :=	git
 
-# This rule tries to clean the tree right down to how it looks when you do a
-# virgin CVS checkout.
+# git-clean:      Clean all "ignored" files.  Leave untracked files.
+# git-very-clean: Clean all files that aren't stored in source control.
 
-# This target is potentially dangerous since it removes _ANY FILE_ that
-# is not in CVS.  Including files you might mean to add to CVS but
-# haven't yet...  I only use this in subdirectories where it's unlikely
-# we have any new files.  Still... be careful!!
-
-cvsclean = $(PERL) -e '$$k{CVS} = 1; open(E,"< CVS/Entries") || die "CVS/Entries: $$!\n"; while (defined ($$_ = <E>)) { m%^/([^/]*)% or next; $$k{$$1} = 1; } close(E) || die "CVS/Entries: $$!\n"; opendir(D, ".") || die ".: $$!\n"; while (defined ($$_ = readdir(D))) { -f $$_ && ! exists $$k{$$_} && unlink($$_); } closedir(D) || die ".: $$!\n";'
-
-.PHONY: cvs-clean
-cvs-clean: maintainer-clean
-	-rm -rf *~ $(CVS-CLEAN-FILES)
-	-cd config && $(cvsclean)
-	-cd po     && $(cvsclean)
-	-cd doc    && $(cvsclean)
-	-cd glob   && $(cvsclean)
+.PHONY: git-clean git-very-clean
+git-clean:
+	-$(GIT) clean -fdX
+git-very-clean: git-clean
+	-$(GIT) clean -fd
 
 
-# ----------------------------------------------------------------------
-#
-# The sections below were stolen from the Makefile.maint used by fileutils,
-# sh-utils, textutils, CPPI, Bison, and Autoconf.
+
+## ---------------------- ##
+## Generating ChangeLog.  ##
+## ---------------------- ##
+
+gl2cl-date := 2013-10-10
+gl2cl := $(GNULIBDIR)/build-aux/gitlog-to-changelog
+
+# Rebuild the changelog whenever a new commit is added
+ChangeLog: .check-git-HEAD
+	if test -f '$(gl2cl)'; then \
+	    '$(gl2cl)' --since='$(gl2cl-date)' > '$@'; \
+	else \
+	    echo "WARNING: $(gl2cl) is not available.  No $@ generated."; \
+	fi
+
+.PHONY: .check-git-HEAD
+.check-git-HEAD:
+	sha="`git rev-parse HEAD`"; \
+	[ -f '$@' ] && [ "`cat '$@' 2>/dev/null`" = "$$sha" ] \
+	    || echo "$$sha" > '$@'
 
 
 ## ---------------- ##
 ## Updating files.  ##
 ## ---------------- ##
 
-WGET = wget --passive-ftp -nv
+WGET = wget --passive-ftp -np -nv
 ftp-gnu = ftp://ftp.gnu.org/gnu
 
 move_if_change =  if test -r $(target) && cmp -s $(target).t $(target); then \
 		    echo $(target) is unchanged; rm -f $(target).t; \
 		  else \
-		    mv $(target).t $(target); \
+		    mv -f $(target).t $(target); \
 		  fi
 
 # ------------------- #
@@ -138,8 +159,7 @@ move_if_change =  if test -r $(target) && cmp -s $(target).t $(target); then \
 #   http://translation.sf.net/maint/
 #   ftp://tiger.informatik.hu-berlin.de/pub/po/maint/
 
-po_wget_flags =	--recursive --level=1 --no-directories --no-parent \
-		--no-check-certificate
+po_wget_flags =	--recursive --level=1 --no-directories --no-check-certificate
 po_repo = http://translationproject.org/latest/$(PACKAGE)
 .PHONY: do-po-update po-update
 do-po-update:
@@ -148,7 +168,8 @@ do-po-update:
 	  && mkdir "$$tmppo" \
 	  && (cd "$$tmppo" \
 		&& $(WGET) $(po_wget_flags) -A '*.po' $(po_repo)) \
-	  && cp "$$tmppo"/*.po $(top_srcdir)/po && rm -rf "$$tmppo"
+	  && cp "$$tmppo"/*.po $(top_srcdir)/po \
+	  && rm -rf "$$tmppo"
 	cd po && $(MAKE) update-po
 	$(MAKE) po-check
 
@@ -197,11 +218,46 @@ scm-update: get-config/texinfo.tex get-config/config.guess get-config/config.sub
 update: po-update scm-update
 
 
+# ---------------------------------- #
+# Alternative configuration checks.  #
+# ---------------------------------- #
+
+.PHONY: check-alt-config
+check-alt-config: \
+	checkcfg.--disable-job-server \
+	checkcfg.--disable-load \
+	checkcfg.--without-guile \
+	checkcfg.CPPFLAGS^-DNO_OUTPUT_SYNC \
+	checkcfg.CPPFLAGS^-DNO_ARCHIVES
+
+NR_MAKE = $(MAKE)
+
+# Check builds both with build.sh and with make
+checkcfg.%: distdir
+	@( rm -rf $(distdir)/_build \
+	&& mkdir $(distdir)/_build \
+	&& cd $(distdir)/_build \
+	&& echo "Testing configure with $(subst ^,=,$*)" \
+	&& ../configure --srcdir=.. $(subst ^,=,$*) \
+		$(AM_DISTCHECK_CONFIGURE_FLAGS) $(DISTCHECK_CONFIGURE_FLAGS) \
+		CFLAGS='$(AM_CFLAGS)' \
+	&& ./build.sh \
+	&& ./make $(AM_MAKEFLAGS) check \
+	&& rm -f *.o make \
+	&& $(NR_MAKE) $(AM_MAKEFLAGS) \
+	&& ./make $(AM_MAKEFLAGS) check ) 2>&1 | tee checkcfg.$*.log
+
+
 ## --------------- ##
 ## Sanity checks.  ##
 ## --------------- ##
 
-# Checks that don't require cvs.  Run 'changelog-check' last as
+# Before we build a distribution be sure we run our local checks
+#distdir: local-check
+
+.PHONY: local-check po-check changelog-check
+
+# Checks that don't require Git.  Run 'changelog-check' last as
 # previous test may reveal problems requiring new ChangeLog entries.
 local-check: po-check changelog-check
 
@@ -216,15 +272,70 @@ changelog-check:
 	fi
 
 # Verify that all source files using _() are listed in po/POTFILES.in.
-# Ignore make.h; it defines _().
+# Ignore makeint.h; it defines _().
 po-check:
 	if test -f po/POTFILES.in; then \
 	  grep '^[^#]' po/POTFILES.in | sort > $@-1; \
-	  $(PERL) -wn -e 'if (/\b_\(/) { $$ARGV eq "make.h" || print "$$ARGV\n" and close ARGV }' *.c *.h | sort > $@-2; \
+	  $(PERL) -wn -e 'if (/\b_\(/) { $$ARGV eq "makeint.h" || print "$$ARGV\n" and close ARGV }' *.c *.h | sort > $@-2; \
 	  diff -u $@-1 $@-2 || exit 1; \
 	  rm -f $@-1 $@-2; \
 	fi
 
+
+## --------------- ##
+## Generate docs.  ##
+## --------------- ##
+
+.PHONY: update-makeweb gendocs
+
+CVS = cvs
+
+makeweb-repo = $(USER)@cvs.sv.gnu.org:/web/make
+gnuweb-repo = :pserver:anonymous@cvs.sv.gnu.org:/web/www
+gnuweb-dir = www/server/standards
+
+# Get the GNU make web page boilerplate etc.
+update-makeweb:
+	[ -d '$(MAKEWEBDIR)' ] || mkdir -p '$(MAKEWEBDIR)'
+	[ -d '$(MAKEWEBDIR)'/CVS ] \
+	    && { cd '$(MAKEWEBDIR)' && $(CVS) update; } \
+	    || { mkdir -p '$(dir $(MAKEWEBDIR))' && cd '$(dir $(MAKEWEBDIR))' \
+		 && $(CVS) -d $(makeweb-repo) co -d '$(notdir $(MAKEWEBDIR))' make; }
+
+# Get the GNU web page boilerplate etc.
+update-gnuweb:
+	[ -d '$(GNUWEBDIR)' ] || mkdir -p '$(GNUWEBDIR)'
+	[ -d '$(GNUWEBDIR)/$(gnuweb-dir)'/CVS ] \
+	    && { cd '$(GNUWEBDIR)/$(gnuweb-dir)' && $(CVS) update; } \
+	    || { cd '$(GNUWEBDIR)' && $(CVS) -d $(gnuweb-repo) co '$(gnuweb-dir)'; }
+
+gendocs: update-gnuweb update-makeweb
+	cp $(GNULIBDIR)/doc/gendocs_template doc
+	cd doc \
+	  && rm -rf doc/manual \
+	  && $(GNULIBDIR)/build-aux/gendocs.sh --email '$(BUGLIST)' \
+		make 'GNU Make Manual'
+	find '$(MAKEWEBDIR)'/manual \( -name CVS -prune \) -o \( -name '[!.]*' -type f -exec rm -f '{}' \; \)
+	cp -r doc/manual '$(MAKEWEBDIR)'
+	@echo 'Status of $(MAKEWEBDIR) repo:' && cd '$(MAKEWEBDIR)' \
+	    && cvs -q -n update | grep -v '^M ' \
+	    && echo '- cvs add <new files>' \
+	    && echo '- cvs remove <deleted files>' \
+	    && echo '- cvs commit' \
+	    && echo '- cvs tag make-$(subst .,-,$(VERSION))'
+
+## ------------------------- ##
+## Make release targets.     ##
+## ------------------------- ##
+
+.PHONY: tag-release
+tag-release:
+	case '$(VERSION)' in \
+	    (*.*.9*) message=" candidate" ;; \
+	    (*)      message= ;; \
+	esac; \
+	$(GIT) tag -m "GNU Make release$$message $(VERSION)" -u '$(GPG_FINGERPRINT)' '$(VERSION)'
+
 ## ------------------------- ##
 ## GNU FTP upload artifacts. ##
 ## ------------------------- ##
@@ -234,7 +345,7 @@ po-check:
 # you're SOL! :)
 
 GPG = gpg
-GPGFLAGS = -u 6338B6D4
+GPGFLAGS = -u $(GPG_FINGERPRINT)
 
 DIST_ARCHIVES_SIG = $(addsuffix .sig,$(DIST_ARCHIVES))
 DIST_ARCHIVES_DIRECTIVE = $(addsuffix .directive.asc,$(DIST_ARCHIVES))
@@ -271,7 +382,7 @@ $(UPLOADS): $(DIST_ARCHIVES) $(DIST_ARCHIVES_SIG) $(DIST_ARCHIVES_DIRECTIVE)
 	$(FTPPUT) "$(gnu-upload-host)" "$(gnu-upload-dir)/$(@:upload-%=%)" $^
 
 
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under

make.1

@@ -143,7 +143,9 @@ for showing implicit rules,
 .I j
 for details on invocation of commands, and
 .I m
-for debugging while remaking makefiles.
+for debugging while remaking makefiles.  Use
+.I n
+to disable all previous debugging flags.
 .TP 0.5i
 \fB\-e\fR, \fB\-\-environment\-overrides\fR
 Give variables taken from the environment precedence
@@ -220,6 +222,28 @@ on account of changes in
 .IR file .
 Essentially the file is treated as very old and its rules are ignored.
 .TP 0.5i
+\fB\-O\fR[\fItype\fR], \fB\-\-output\-sync\fR[=\fItype\fR]
+When running multiple jobs in parallel with \fB-j\fR, ensure the output of
+each job is collected together rather than interspersed with output from
+other jobs.  If
+.I type
+is not specified or is
+.B target
+the output from the entire recipe for each target is grouped together.  If
+.I type
+is
+.B line
+the output from each command line within a recipe is grouped together.
+If
+.I type
+is
+.B recurse
+output from an entire recursive make is grouped together.  If
+.I type
+is
+.B none
+output synchronization is disabled.
+.TP 0.5i
 \fB\-p\fR, \fB\-\-print\-data\-base\fR
 Print the data base (rules and variable values) that results from
 reading the makefiles; then execute as usual or as otherwise
@@ -268,8 +292,8 @@ future invocations of
 .BR make .
 .TP 0.5i
 .B \-\-trace
-Print information about the commands invoked by
-.BR make.
+Information about the disposition of each target is printed (why the target is
+being rebuilt and what commands are run to rebuild it).
 .TP 0.5i
 \fB\-v\fR, \fB\-\-version\fR
 Print the version of the
@@ -339,7 +363,7 @@ This manual page contributed by Dennis Morse of Stanford University.
 Further updates contributed by Mike Frysinger.  It has been reworked by Roland
 McGrath.  Maintained by Paul Smith.
 .SH "COPYRIGHT"
-Copyright \(co 1992-1993, 1996-2012 Free Software Foundation, Inc.
+Copyright \(co 1992-1993, 1996-2014 Free Software Foundation, Inc.
 This file is part of
 .IR "GNU make" .
 .LP

make.lnk

@@ -1,4 +1,4 @@
-FROM LIB:cres.o "commands.o"+"job.o"+"dir.o"+"file.o"+"misc.o"+"main.o"+"read.o"+"remake.o"+"rule.o"+"implicit.o"+"default.o"+"variable.o"+"expand.o"+"function.o"+"vpath.o"+"version.o"+"ar.o"+"arscan.o"+"signame.o"+"remote-stub.o"+"getopt.o"+"getopt1.o"+"alloca.o"+"amiga.o"+"hash.o"+"strcache.o"
+FROM LIB:cres.o "commands.o"+"job.o"+"dir.o"+"file.o"+"misc.o"+"main.o"+"read.o"+"remake.o"+"rule.o"+"implicit.o"+"default.o"+"variable.o"+"expand.o"+"function.o"+"vpath.o"+"version.o"+"ar.o"+"arscan.o"+"signame.o"+"remote-stub.o"+"getopt.o"+"getopt1.o"+"alloca.o"+"amiga.o"+"hash.o"+"strcache.o"+"output.o"
 TO "make.new"
 LIB glob/glob.lib LIB:sc.lib LIB:amiga.lib
 QUIET

make_msvc_net2003.vcproj

@@ -154,11 +154,11 @@
 			<File
 				RelativePath=".\getopt1.c">
 			</File>
-<!--
+
 			<File
 				RelativePath=".\guile.c">
 			</File>
--->
+
 			<File
 				RelativePath=".\hash.c">
 			</File>
@@ -171,6 +171,12 @@
 			<File
 				RelativePath=".\job.c">
 			</File>
+			<File
+				RelativePath=".\load.c">
+			</File>
+			<File
+				RelativePath=".\output.c">
+			</File>
 			<File
 				RelativePath=".\main.c">
 			</File>
@@ -207,6 +213,9 @@
 				<File
 					RelativePath=".\w32\compat\dirent.c">
 				</File>
+				<File
+					RelativePath=".\w32\compat\posixfcn.c">
+				</File>
 				<File
 					RelativePath=".\w32\subproc\misc.c">
 					<FileConfiguration
@@ -278,7 +287,10 @@
 				RelativePath=".\job.h">
 			</File>
 			<File
-				RelativePath=".\make.h">
+				RelativePath=".\output.h">
+			</File>
+			<File
+				RelativePath=".\makeint.h">
 			</File>
 			<File
 				RelativePath=".\rule.h">

makefile.com

@@ -1,8 +1,7 @@
 $!
 $! Makefile.com - builds GNU Make for VMS
 $!
-$! P1 is non-empty if you want to link with the VAXCRTL library instead
-$!    of the shareable executable
+$! P1 = LIST will provide compiler listings.
 $! P2 = DEBUG will build an image with debug information
 $! P3 = WALL will enable all warning messages (some are suppressed since
 $!      one macro intentionally causes an error condition)
@@ -50,6 +49,12 @@ $      endif
 $   endif
 $ endif
 $!
+$!
+$ if (p1 .eqs. "LIST")
+$ then
+$   ccopt = ccopt + "/list/show=(expan,inclu)"
+$ endif
+$!
 $! Should we build a debug image
 $!
 $ if (p2.eqs."DEBUG")
@@ -67,9 +72,11 @@ $ then
 $   gosub check_cc_qual
 $ endif
 $ filelist = "alloca ar arscan commands default dir expand file function " + -
-             "hash implicit job main misc read remake remote-stub rule " + -
-	     "signame variable version vmsfunctions vmsify vpath " + -
+             "guile hash implicit job load main misc read remake " + -
+             "remote-stub rule output signame variable version " + -
+             "vmsfunctions vmsify vpath " + -
 	     "[.glob]glob [.glob]fnmatch getopt1 getopt strcache"
+$!
 $ copy config.h-vms config.h
 $ n=0
 $ open/write optf make.opt
@@ -77,18 +84,14 @@ $ loop:
 $ cfile = f$elem(n," ",filelist)
 $ if cfile .eqs. " " then goto linkit
 $ write sys$output "Compiling ''cfile'..."
-$ call compileit 'cfile' 'p1'
+$ call compileit 'cfile'
 $ n = n + 1
 $ goto loop
 $ linkit:
 $ close optf
-$ if p1 .nes. "" then goto link_using_library
 $ link/exe=make make.opt/opt'lopt
 $ goto cleanup
 $
-$ link_using_library:
-$ link/exe=make make.opt/opt,sys$library:vaxcrtl/lib'lopt
-$
 $ cleanup:
 $ if f$trnlnm("SYS").nes."" then $ deassign sys
 $ if f$trnlnm("OPTF").nes."" then $ close optf
@@ -128,17 +131,22 @@ $!-----------------------------------------------------------------------------
 $!
 $ compileit : subroutine
 $ ploc = f$locate("]",p1)
-$ filnam = p1
-$ if ploc .lt. f$length(p1) then filnam=f$extract(ploc+1,100,p1)
-$ write optf "''filnam'"
-$ cc'ccopt'/include=([],[.glob]) -
+$ if ploc .lt. f$length(p1)
+$ then
+$   objdir = f$extract(0, ploc+1, p1)
+$   write optf p1
+$ else
+$   objdir := []
+$   write optf objdir+p1
+$ endif
+$ cc'ccopt'/include=([],[.glob])/obj='objdir' -
   /define=("allocated_variable_expand_for_file=alloc_var_expand_for_file","unlink=remove","HAVE_CONFIG_H","VMS") -
   'p1'
 $ exit
 $ endsubroutine : compileit
 $!
 $!-----------------------------------------------------------------------------
-$!Copyright (C) 1996-2012 Free Software Foundation, Inc.
+$!Copyright (C) 1996-2014 Free Software Foundation, Inc.
 $!This file is part of GNU Make.
 $!
 $!GNU Make is free software; you can redistribute it and/or modify it under

makefile.vms

@@ -1,6 +1,6 @@
 # -*-Makefile-*- to build GNU make on VMS
 #
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -20,7 +20,7 @@
 #  Klaus Kämpf (kkaempf@rmi.de)
 # Modified for version 3.78.1 by Hartmut.Becker@compaq.com.
 # Modified for version 3.80 by zinser@decus.de
-# Modified for version 3.81 by Hartmut Becker
+# Modified for versions 3.81, 3.99.90 by Hartmut Becker
 
 CC = cc
 CP = copy
@@ -88,19 +88,19 @@ mandir = []
 # Number to put on the man page filename.
 manext = 1
 
-#guile = ,guile.obj
+guile = ,guile.obj
 
-objs = commands.obj,job.obj,dir.obj,file.obj,misc.obj,hash.obj,\
-       main.obj,read.obj,remake.obj,rule.obj,implicit.obj,\
+objs = commands.obj,job.obj,output.obj,dir.obj,file.obj,misc.obj,hash.obj,\
+       load.obj,main.obj,read.obj,remake.obj,rule.obj,implicit.obj,\
        default.obj,variable.obj,expand.obj,function.obj,strcache.obj,\
-       vpath.obj,version.obj\
-       $(ARCHIVES)$(ALLOCA)$(extras)$(getopt)$(glob)$(guile)
+       vpath.obj,version.obj$(guile)\
+       $(ARCHIVES)$(ALLOCA)$(extras)$(getopt)$(glob)
 
-srcs = commands.c job.c dir.c file.c misc.c guile.c hash.c \
-	main.c read.c remake.c rule.c implicit.c \
+srcs = commands.c job.c output.c dir.c file.c misc.c guile.c hash.c \
+	load.c main.c read.c remake.c rule.c implicit.c \
 	default.c variable.c expand.c function.c strcache.c \
 	vpath.c version.c vmsfunctions.c vmsify.c $(ARCHIVES_SRC) $(ALLOCASRC) \
-	commands.h dep.h filedef.h job.h make.h rule.h variable.h
+	commands.h dep.h filedef.h job.h output.h makeint.h rule.h variable.h
 
 
 .PHONY: all doc
@@ -114,40 +114,60 @@ make.exe: $(objs)
 
 .PHONY: clean realclean
 clean:
-	$$ purge [...]
+	-purge [...]
 	-$(RM) make.exe;,*.obj;
 	-$(RM) [.glob]*.obj;
 
-# Automatically generated dependencies.
-commands.obj: commands.c make.h dep.h commands.h filedef.h variable.h job.h
-job.obj: job.c vmsjobs.c make.h commands.h job.h filedef.h variable.h
-dir.obj: dir.c make.h
-file.obj: file.c make.h commands.h dep.h filedef.h variable.h
-misc.obj: misc.c make.h dep.h
-hash.obj: hash.c make.h hash.h
-strcache.obj: strcache.c make.h hash.h
-main.obj: main.c make.h commands.h dep.h filedef.h variable.h job.h
-guile.obj: guile.c make.h debug.h dep.h gmk-default.h
-read.obj: read.c make.h commands.h dep.h filedef.h variable.h
-remake.obj: remake.c make.h commands.h job.h dep.h filedef.h
-rule.obj: rule.c make.h commands.h dep.h filedef.h variable.h rule.h
-implicit.obj: implicit.c make.h rule.h dep.h filedef.h
-default.obj: default.c make.h rule.h dep.h filedef.h commands.h variable.h
-variable.obj: variable.c make.h commands.h variable.h dep.h filedef.h
-expand.obj: expand.c make.h commands.h filedef.h variable.h
-function.obj: function.c make.h variable.h dep.h commands.h job.h
-vpath.obj: vpath.c make.h filedef.h variable.h
+ar.obj: ar.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h dep.h \
+     [.glob]fnmatch.h
+arscan.obj: arscan.c makeint.h config.h gnumake.h gettext.h
+commands.obj: commands.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h dep.h variable.h job.h output.h commands.h
+default.obj: default.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h variable.h rule.h dep.h job.h output.h commands.h
+dir.obj: dir.c makeint.h config.h gnumake.h gettext.h hash.h filedef.h \
+     dep.h [.glob]glob.h
+expand.obj: expand.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h job.h output.h commands.h variable.h rule.h
+file.obj: file.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h job.h output.h commands.h variable.h debug.h
+[.glob]fnmatch.obj: [.glob]fnmatch.c config.h [.glob]fnmatch.h
+function.obj: function.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h variable.h dep.h job.h output.h commands.h debug.h
+getopt.obj: getopt.c config.h gettext.h getopt.h
+getopt1.obj: getopt1.c config.h getopt.h
+[.glob]glob.obj: [.glob]glob.c config.h [.glob]fnmatch.h [.glob]glob.h
+guile.obj: guile.c makeint.h config.h gnumake.h gettext.h
+hash.obj: hash.c makeint.h config.h gnumake.h gettext.h hash.h
+implicit.obj: implicit.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h rule.h dep.h debug.h variable.h job.h output.h commands.h
+job.obj: job.c makeint.h config.h gnumake.h gettext.h job.h output.h debug.h \
+     filedef.h hash.h commands.h variable.h debug.h vmsjobs.c
+load.obj: load.c makeint.h config.h gnumake.h gettext.h
+main.obj: main.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h variable.h job.h output.h commands.h rule.h debug.h getopt.h
+misc.obj: misc.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h debug.h
+output.obj: output.c makeint.h config.h gnumake.h gettext.h job.h output.h
+read.obj: read.c makeint.h config.h gnumake.h gettext.h [.glob]glob.h \
+     filedef.h hash.h dep.h job.h output.h commands.h variable.h rule.h \
+     debug.h
+remake.obj: remake.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h job.h output.h commands.h dep.h variable.h debug.h
+remote-stub.obj: remote-stub.c makeint.h config.h gnumake.h gettext.h \
+     filedef.h hash.h job.h output.h commands.h
+rule.obj: rule.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     dep.h job.h output.h commands.h variable.h rule.h
+signame.obj: signame.c makeint.h config.h gnumake.h gettext.h
+strcache.obj: strcache.c makeint.h config.h gnumake.h gettext.h hash.h
+variable.obj: variable.c makeint.h config.h gnumake.h gettext.h filedef.h \
+     hash.h dep.h job.h output.h commands.h variable.h rule.h
 version.obj: version.c config.h
-arscan.obj: arscan.c
-ar.obj: ar.c make.h filedef.h
-signame.obj: signame.c
-remote-stub.obj: remote-stub.c
-[.glob]glob.obj: [.glob]glob.c
-[.glob]fnmatch.obj: [.glob]fnmatch.c
-getopt.obj: getopt.c
-getopt1.obj: getopt1.c
-vmsfunctions.obj: vmsfunctions.c make.h vmsdir.h
-vmsify.obj: vmsify.c make.h
+vmsfunctions.obj: vmsfunctions.c makeint.h config.h gnumake.h gettext.h \
+     debug.h job.h output.h vmsdir.h
+vmsify.obj: vmsify.c
+vpath.obj: vpath.c makeint.h config.h gnumake.h gettext.h filedef.h hash.h \
+     variable.h
 
 config.h: config.h-vms
 	$(CP) $< $@

makeint.h

@@ -1,5 +1,5 @@
 /* Miscellaneous global declarations and portability cruft for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -16,7 +16,7 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* We use <config.h> instead of "config.h" so that a compilation
    using -I. -I$srcdir will use ./config.h rather than $srcdir/config.h
-   (which it would do because make.h was found in $srcdir).  */
+   (which it would do because makeint.h was found in $srcdir).  */
 #include <config.h>
 #undef  HAVE_CONFIG_H
 #define HAVE_CONFIG_H 1
@@ -47,6 +47,14 @@ char *alloca ();
 # define NDEBUG 1
 #endif
 
+/* Include the externally-visible content.
+   Be sure to use the local one, and not one installed on the system.
+   Define GMK_BUILDING_MAKE for proper selection of dllexport/dllimport
+   declarations for MS-Windows.  */
+#ifdef WINDOWS32
+# define GMK_BUILDING_MAKE
+#endif
+#include "gnumake.h"
 
 #ifdef  CRAY
 /* This must happen before #include <signal.h> so
@@ -186,6 +194,7 @@ unsigned int get_path_max (void);
 #endif
 
 #ifdef VMS
+# include <fcntl.h>
 # include <types.h>
 # include <unixlib.h>
 # include <unixio.h>
@@ -341,10 +350,17 @@ char *strsignal (int signum);
 # include <malloc.h>
 # define pipe(_p)        _pipe((_p), 512, O_BINARY)
 # define kill(_pid,_sig) w32_kill((_pid),(_sig))
+/* MSVC and Watcom C don't have ftruncate.  */
+# if defined(_MSC_VER) || defined(__WATCOMC__)
+#  define ftruncate(_fd,_len) _chsize(_fd,_len)
+# endif
+/* MinGW64 doesn't have _S_ISDIR.  */
+# ifndef _S_ISDIR
+#  define _S_ISDIR(m)  S_ISDIR(m)
+# endif
 
 void sync_Path_environment (void);
 int w32_kill (pid_t pid, int sig);
-char *end_of_token_w32 (const char *s, char stopchar);
 int find_and_set_default_shell (const char *token);
 
 /* indicates whether or not we have Bourne shell */
@@ -352,8 +368,46 @@ extern int no_default_sh_exe;
 
 /* is default_shell unixy? */
 extern int unixy_shell;
+
+/* We don't have a preferred fixed value for LOCALEDIR.  */
+# ifndef LOCALEDIR
+#  define LOCALEDIR NULL
+# endif
+
+/* Include only the minimal stuff from windows.h.   */
+#define WIN32_LEAN_AND_MEAN
 #endif  /* WINDOWS32 */
 
+#define ANY_SET(_v,_m)  (((_v)&(_m)) != 0)
+#define NONE_SET(_v,_m) (! ANY_SET ((_v),(_m)))
+
+#define MAP_NUL         0x0001
+#define MAP_BLANK       0x0002
+#define MAP_SPACE       0x0004
+#define MAP_COMMENT     0x0008
+#define MAP_SEMI        0x0010
+#define MAP_EQUALS      0x0020
+#define MAP_COLON       0x0040
+#define MAP_PERCENT     0x0080
+#define MAP_PIPE        0x0100
+#define MAP_DOT         0x0200
+#define MAP_COMMA       0x0400
+
+/* These are the valid characters for a user-defined function.  */
+#define MAP_USERFUNC    0x2000
+/* This means not only a '$', but skip the variable reference.  */
+#define MAP_VARIABLE    0x4000
+/* The set of characters which are directory separators is OS-specific.  */
+#define MAP_DIRSEP      0x8000
+
+#ifdef VMS
+# define MAP_VMSCOMMA   MAP_COMMA
+#else
+# define MAP_VMSCOMMA   0x0000
+#endif
+
+#define STOP_SET(_v,_m) ANY_SET (stopchar_map[(unsigned char)(_v)],(_m))
+
 #if defined(HAVE_SYS_RESOURCE_H) && defined(HAVE_GETRLIMIT) && defined(HAVE_SETRLIMIT)
 # define SET_STACK_SIZE
 #endif
@@ -362,45 +416,49 @@ extern int unixy_shell;
 extern struct rlimit stack_limit;
 #endif
 
-struct floc
-  {
-    const char *filenm;
-    unsigned long lineno;
-  };
-#define NILF ((struct floc *)0)
+#define NILF ((gmk_floc *)0)
 
-#define CSTRLEN(_s) (sizeof (_s)-1)
+#define CSTRLEN(_s)           (sizeof (_s)-1)
 #define STRING_SIZE_TUPLE(_s) (_s), CSTRLEN(_s)
 
-
-/* We have to have stdarg.h or varargs.h AND v*printf or doprnt to use
-   variadic versions of these functions.  */
+/* The number of bytes needed to represent the largest integer as a string.  */
+#define INTSTR_LENGTH         CSTRLEN ("18446744073709551616")
 
-#if HAVE_STDARG_H || HAVE_VARARGS_H
-# if HAVE_VPRINTF || HAVE_DOPRNT
-#  define USE_VARIADIC 1
-# endif
-#endif
-
-#if HAVE_ANSI_COMPILER && USE_VARIADIC && HAVE_STDARG_H
-const char *concat (unsigned int, ...);
-void message (int prefix, const char *fmt, ...)
-              __attribute__ ((__format__ (__printf__, 2, 3)));
-void error (const struct floc *flocp, const char *fmt, ...)
-            __attribute__ ((__format__ (__printf__, 2, 3)));
-void fatal (const struct floc *flocp, const char *fmt, ...)
-                   __attribute__ ((noreturn, __format__ (__printf__, 2, 3)));
+#ifdef HAVE_TTYNAME
+# define TTYNAME(_f) ttyname (_f)
 #else
-const char *concat ();
-void message ();
-void error ();
-void fatal ();
+# define TTYNAME(_f) "true"
 #endif
 
+
+const char *concat (unsigned int, ...);
+void message (int prefix, size_t length, const char *fmt, ...)
+              __attribute__ ((__format__ (__printf__, 3, 4)));
+void error (const gmk_floc *flocp, size_t length, const char *fmt, ...)
+            __attribute__ ((__format__ (__printf__, 3, 4)));
+void fatal (const gmk_floc *flocp, size_t length, const char *fmt, ...)
+                   __attribute__ ((noreturn, __format__ (__printf__, 3, 4)));
+
+#define O(_t,_a,_f)           _t((_a), 0, (_f))
+#define OS(_t,_a,_f,_s)       _t((_a), strlen (_s), (_f), (_s))
+#define OSS(_t,_a,_f,_s1,_s2) _t((_a), strlen (_s1) + strlen (_s2), \
+                                 (_f), (_s1), (_s2))
+#define OSSS(_t,_a,_f,_s1,_s2,_s3) _t((_a), strlen (_s1) + strlen (_s2) + strlen (_s3), \
+                                      (_f), (_s1), (_s2), (_s3))
+#define ON(_t,_a,_f,_n)       _t((_a), INTSTR_LENGTH, (_f), (_n))
+#define ONN(_t,_a,_f,_n1,_n2) _t((_a), INTSTR_LENGTH*2, (_f), (_n1), (_n2))
+
+#define OSN(_t,_a,_f,_s,_n)   _t((_a), strlen (_s) + INTSTR_LENGTH, \
+                                 (_f), (_s), (_n))
+#define ONS(_t,_a,_f,_n,_s)   _t((_a), INTSTR_LENGTH + strlen (_s), \
+                                 (_f), (_n), (_s))
+
+#define OUT_OF_MEM() O (fatal, NILF, _("virtual memory exhausted"))
+
 void die (int) __attribute__ ((noreturn));
-void log_working_directory (int);
 void pfatal_with_name (const char *) __attribute__ ((noreturn));
 void perror_with_name (const char *, const char *);
+#define xstrlen(_s) ((_s)==NULL ? 0 : strlen (_s))
 void *xmalloc (unsigned int);
 void *xcalloc (unsigned int);
 void *xrealloc (void *, unsigned int);
@@ -415,7 +473,6 @@ int alpha_compare (const void *, const void *);
 void print_spaces (unsigned int);
 char *find_percent (char *);
 const char *find_percent_cached (const char **);
-FILE *open_tmpfile (char **, const char *);
 
 #ifndef NO_ARCHIVES
 int ar_name (const char *);
@@ -424,9 +481,9 @@ int ar_touch (const char *);
 time_t ar_member_date (const char *);
 
 typedef long int (*ar_member_func_t) (int desc, const char *mem, int truncated,
-				      long int hdrpos, long int datapos,
-				      long int size, long int date, int uid,
-				      int gid, int mode, const void *arg);
+                                      long int hdrpos, long int datapos,
+                                      long int size, long int date, int uid,
+                                      int gid, int mode, const void *arg);
 
 long int ar_scan (const char *archive, ar_member_func_t function, const void *arg);
 int ar_name_equal (const char *name, const char *mem, int truncated);
@@ -443,6 +500,7 @@ const char *dir_name (const char *);
 void hash_init_directories (void);
 
 void define_default_variables (void);
+void undefine_default_variables (void);
 void set_default_suffixes (void);
 void install_default_suffix_rules (void);
 void install_default_implicit_rules (void);
@@ -459,8 +517,6 @@ void user_access (void);
 void make_access (void);
 void child_access (void);
 
-void close_stdout (void);
-
 char *strip_whitespace (const char **begpp, const char **endpp);
 
 /* String caching  */
@@ -472,17 +528,12 @@ const char *strcache_add_len (const char *str, unsigned int len);
 int strcache_setbufsize (unsigned int size);
 
 /* Guile support  */
-#ifdef HAVE_GUILE
-int guile_gmake_setup (const struct floc *flocp);
-#endif
+int guile_gmake_setup (const gmk_floc *flocp);
 
-/* Loadable object support  */
-typedef int (*load_func_t)(const struct floc *flocp);
-int load_file (const struct floc *flocp, const char *filename, int noerror);
-
-#ifdef  HAVE_VFORK_H
-# include <vfork.h>
-#endif
+/* Loadable object support.  Sets to the strcached name of the loaded file.  */
+typedef int (*load_func_t)(const gmk_floc *flocp);
+int load_file (const gmk_floc *flocp, const char **filename, int noerror);
+void unload_file (const char *name);
 
 /* We omit these declarations on non-POSIX systems which define _POSIX_VERSION,
    because such systems often declare them in header files anyway.  */
@@ -527,18 +578,25 @@ int strncasecmp (const char *s1, const char *s2, int n);
 # endif
 #endif
 
-extern const struct floc *reading_file;
-extern const struct floc **expanding_var;
+#define OUTPUT_SYNC_NONE    0
+#define OUTPUT_SYNC_LINE    1
+#define OUTPUT_SYNC_TARGET  2
+#define OUTPUT_SYNC_RECURSE 3
+
+extern const gmk_floc *reading_file;
+extern const gmk_floc **expanding_var;
 
 extern char **environ;
 
+extern unsigned short stopchar_map[];
+
 extern int just_print_flag, silent_flag, ignore_errors_flag, keep_going_flag;
 extern int print_data_base_flag, question_flag, touch_flag, always_make_flag;
 extern int env_overrides, no_builtin_rules_flag, no_builtin_variables_flag;
 extern int print_version_flag, print_directory_flag, check_symlink_flag;
 extern int warn_undefined_variables_flag, trace_flag, posix_pedantic;
 extern int not_parallel, second_expansion, clock_skew_detected;
-extern int rebuilding_makefiles, one_shell;
+extern int rebuilding_makefiles, one_shell, output_sync, verify_flag;
 
 /* can we run commands via 'sh -c xxx' or must we use batch files? */
 extern int batch_mode_shell;
@@ -557,7 +615,17 @@ extern double max_load_average;
 extern int max_load_average;
 #endif
 
+#ifdef WINDOWS32
 extern char *program;
+#else
+extern const char *program;
+#endif
+
+#ifdef VMS
+const char *vms_command(const char *argv0);
+const char *vms_progname(const char *argv0);
+#endif
+
 extern char *starting_directory;
 extern unsigned int makelevel;
 extern char *version_string, *remote_description, *make_host;
@@ -574,10 +642,14 @@ extern int handling_fatal_signal;
 #define MAX(_a,_b) ((_a)>(_b)?(_a):(_b))
 #endif
 
+
 #ifdef VMS
-#  define MAKE_SUCCESS 1
-#  define MAKE_TROUBLE 2
-#  define MAKE_FAILURE 3
+/* These are the VMS __posix_exit compliant exit codes, constructed out of
+   STS$M_INHIB_MSG, C facility code, a POSIX condition code mask, MAKE_NNN<<3 and
+   the coresponding VMS severity, here STS$K_SUCCESS and STS$K_ERROR. */
+#  define MAKE_SUCCESS 0x1035a001
+#  define MAKE_TROUBLE 0x1035a00a
+#  define MAKE_FAILURE 0x1035a012
 #else
 #  define MAKE_SUCCESS 0
 #  define MAKE_TROUBLE 1

misc.c

@@ -1,5 +1,5 @@
 /* Miscellaneous generic support functions for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,42 +14,21 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
+#include "filedef.h"
 #include "dep.h"
 #include "debug.h"
 
-/* Variadic functions.  We go through contortions to allow proper function
-   prototypes for both ANSI and pre-ANSI C compilers, and also for those
-   which support stdarg.h vs. varargs.h, and finally those which have
-   vfprintf(), etc. and those who have _doprnt... or nothing.
+/* GNU make no longer supports pre-ANSI89 environments.  */
 
-   This fancy stuff all came from GNU fileutils, except for the VA_PRINTF and
-   VA_END macros used here since we have multiple print functions.  */
+#include <stdarg.h>
 
-#if USE_VARIADIC
-# if HAVE_STDARG_H
-#  include <stdarg.h>
-#  define VA_START(args, lastarg) va_start(args, lastarg)
-# else
-#  include <varargs.h>
-#  define VA_START(args, lastarg) va_start(args)
-# endif
-# if HAVE_VPRINTF
-#  define VA_PRINTF(fp, lastarg, args) vfprintf((fp), (lastarg), (args))
-# else
-#  define VA_PRINTF(fp, lastarg, args) _doprnt((lastarg), (args), (fp))
-# endif
-# define VA_END(args) va_end(args)
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
 #else
-/* We can't use any variadic interface! */
-# define va_alist a1, a2, a3, a4, a5, a6, a7, a8
-# define va_dcl char *a1, *a2, *a3, *a4, *a5, *a6, *a7, *a8;
-# define VA_START(args, lastarg)
-# define VA_PRINTF(fp, lastarg, args) fprintf((fp), (lastarg), va_alist)
-# define VA_END(args)
+# include <sys/file.h>
 #endif
 
-
 /* Compare strings *S1 and *S2.
    Return negative if the first is less, positive if it is greater,
    zero if they are equal.  */
@@ -72,9 +51,7 @@ alpha_compare (const void *v1, const void *v2)
 void
 collapse_continuations (char *line)
 {
-  register char *in, *out, *p;
-  register int backslash;
-  register unsigned int bs_write;
+  char *in, *out, *p;
 
   in = strchr (line, '\n');
   if (in == 0)
@@ -87,64 +64,64 @@ collapse_continuations (char *line)
   while (*in != '\0')
     {
       /* BS_WRITE gets the number of quoted backslashes at
-	 the end just before IN, and BACKSLASH gets nonzero
-	 if the next character is quoted.  */
-      backslash = 0;
-      bs_write = 0;
+         the end just before IN, and BACKSLASH gets nonzero
+         if the next character is quoted.  */
+      unsigned int backslash = 0;
+      unsigned int bs_write = 0;
       for (p = in - 1; p >= line && *p == '\\'; --p)
-	{
-	  if (backslash)
-	    ++bs_write;
-	  backslash = !backslash;
+        {
+          if (backslash)
+            ++bs_write;
+          backslash = !backslash;
 
-	  /* It should be impossible to go back this far without exiting,
-	     but if we do, we can't get the right answer.  */
-	  if (in == out - 1)
-	    abort ();
-	}
+          /* It should be impossible to go back this far without exiting,
+             but if we do, we can't get the right answer.  */
+          if (in == out - 1)
+            abort ();
+        }
 
       /* Output the appropriate number of backslashes.  */
       while (bs_write-- > 0)
-	*out++ = '\\';
+        *out++ = '\\';
 
       /* Skip the newline.  */
       ++in;
 
       if (backslash)
-	{
+        {
           /* Backslash/newline handling:
              In traditional GNU make all trailing whitespace, consecutive
              backslash/newlines, and any leading whitespace on the next line
              is reduced to a single space.
              In POSIX, each backslash/newline and is replaced by a space.  */
-	  in = next_token (in);
+          in = next_token (in);
           if (! posix_pedantic)
             while (out > line && isblank ((unsigned char)out[-1]))
               --out;
-	  *out++ = ' ';
-	}
+          *out++ = ' ';
+        }
       else
-	/* If the newline isn't quoted, put it in the output.  */
-	*out++ = '\n';
+        /* If the newline isn't quoted, put it in the output.  */
+        *out++ = '\n';
 
       /* Now copy the following line to the output.
-	 Stop when we find backslashes followed by a newline.  */
+         Stop when we find backslashes followed by a newline.  */
       while (*in != '\0')
-	if (*in == '\\')
-	  {
-	    p = in + 1;
-	    while (*p == '\\')
-	      ++p;
-	    if (*p == '\n')
-	      {
-		in = p;
-		break;
-	      }
-	    while (in < p)
-	      *out++ = *in++;
-	  }
-	else
-	  *out++ = *in++;
+        if (*in == '\\')
+          {
+            p = in + 1;
+            while (*p == '\\')
+              ++p;
+            if (*p == '\n')
+              {
+                in = p;
+                break;
+              }
+            while (in < p)
+              *out++ = *in++;
+          }
+        else
+          *out++ = *in++;
     }
 
   *out = '\0';
@@ -164,28 +141,19 @@ print_spaces (unsigned int n)
    This string lives in static, re-used memory.  */
 
 const char *
-#if HAVE_ANSI_COMPILER && USE_VARIADIC && HAVE_STDARG_H
 concat (unsigned int num, ...)
-#else
-concat (num, va_alist)
-     unsigned int num;
-     va_dcl
-#endif
 {
   static unsigned int rlen = 0;
   static char *result = NULL;
   unsigned int ri = 0;
-
-#if USE_VARIADIC
   va_list args;
-#endif
 
-  VA_START (args, num);
+  va_start (args, num);
 
   while (num-- > 0)
     {
       const char *s = va_arg (args, const char *);
-      unsigned int l = s ? strlen (s) : 0;
+      unsigned int l = xstrlen (s);
 
       if (l == 0)
         continue;
@@ -200,7 +168,7 @@ concat (num, va_alist)
       ri += l;
     }
 
-  VA_END (args);
+  va_end (args);
 
   /* Get some more memory if we don't have enough space for the
      terminating '\0'.   */
@@ -215,113 +183,9 @@ concat (num, va_alist)
   return result;
 }
 
-/* Print a message on stdout.  */
-
-void
-#if HAVE_ANSI_COMPILER && USE_VARIADIC && HAVE_STDARG_H
-message (int prefix, const char *fmt, ...)
-#else
-message (prefix, fmt, va_alist)
-     int prefix;
-     const char *fmt;
-     va_dcl
-#endif
-{
-#if USE_VARIADIC
-  va_list args;
-#endif
-
-  log_working_directory (1);
-
-  if (fmt != 0)
-    {
-      if (prefix)
-	{
-	  if (makelevel == 0)
-	    printf ("%s: ", program);
-	  else
-	    printf ("%s[%u]: ", program, makelevel);
-	}
-      VA_START (args, fmt);
-      VA_PRINTF (stdout, fmt, args);
-      VA_END (args);
-      putchar ('\n');
-    }
-
-  fflush (stdout);
-}
-
-/* Print an error message.  */
-
-void
-#if HAVE_ANSI_COMPILER && USE_VARIADIC && HAVE_STDARG_H
-error (const struct floc *flocp, const char *fmt, ...)
-#else
-error (flocp, fmt, va_alist)
-     const struct floc *flocp;
-     const char *fmt;
-     va_dcl
-#endif
-{
-#if USE_VARIADIC
-  va_list args;
-#endif
-
-  log_working_directory (1);
-
-  if (flocp && flocp->filenm)
-    fprintf (stderr, "%s:%lu: ", flocp->filenm, flocp->lineno);
-  else if (makelevel == 0)
-    fprintf (stderr, "%s: ", program);
-  else
-    fprintf (stderr, "%s[%u]: ", program, makelevel);
-
-  VA_START(args, fmt);
-  VA_PRINTF (stderr, fmt, args);
-  VA_END (args);
-
-  putc ('\n', stderr);
-  fflush (stderr);
-}
-
-/* Print an error message and exit.  */
-
-void
-#if HAVE_ANSI_COMPILER && USE_VARIADIC && HAVE_STDARG_H
-fatal (const struct floc *flocp, const char *fmt, ...)
-#else
-fatal (flocp, fmt, va_alist)
-     const struct floc *flocp;
-     const char *fmt;
-     va_dcl
-#endif
-{
-#if USE_VARIADIC
-  va_list args;
-#endif
-
-  log_working_directory (1);
-
-  if (flocp && flocp->filenm)
-    fprintf (stderr, "%s:%lu: *** ", flocp->filenm, flocp->lineno);
-  else if (makelevel == 0)
-    fprintf (stderr, "%s: *** ", program);
-  else
-    fprintf (stderr, "%s[%u]: *** ", program, makelevel);
-
-  VA_START(args, fmt);
-  VA_PRINTF (stderr, fmt, args);
-  VA_END (args);
-
-  fputs (_(".  Stop.\n"), stderr);
-
-  die (2);
-}
 
 #ifndef HAVE_STRERROR
-
-#undef	strerror
-
+#undef  strerror
 char *
 strerror (int errnum)
 {
@@ -338,24 +202,6 @@ strerror (int errnum)
   return buf;
 }
 #endif
-
-/* Print an error message from errno.  */
-
-void
-perror_with_name (const char *str, const char *name)
-{
-  error (NILF, _("%s%s: %s"), str, name, strerror (errno));
-}
-
-/* Print an error message from errno and exit.  */
-
-void
-pfatal_with_name (const char *name)
-{
-  fatal (NILF, _("%s: %s"), name, strerror (errno));
-
-  /* NOTREACHED */
-}
 
 /* Like malloc but get fatal error if memory is exhausted.  */
 /* Don't bother if we're using dmalloc; it provides these for us.  */
@@ -373,7 +219,7 @@ xmalloc (unsigned int size)
   /* Make sure we don't allocate 0, for pre-ISO implementations.  */
   void *result = malloc (size ? size : 1);
   if (result == 0)
-    fatal (NILF, _("virtual memory exhausted"));
+    OUT_OF_MEM();
   return result;
 }
 
@@ -384,7 +230,7 @@ xcalloc (unsigned int size)
   /* Make sure we don't allocate 0, for pre-ISO implementations.  */
   void *result = calloc (size ? size : 1, 1);
   if (result == 0)
-    fatal (NILF, _("virtual memory exhausted"));
+    OUT_OF_MEM();
   return result;
 }
 
@@ -399,7 +245,7 @@ xrealloc (void *ptr, unsigned int size)
     size = 1;
   result = ptr ? realloc (ptr, size) : malloc (size);
   if (result == 0)
-    fatal (NILF, _("virtual memory exhausted"));
+    OUT_OF_MEM();
   return result;
 }
 
@@ -416,7 +262,7 @@ xstrdup (const char *ptr)
 #endif
 
   if (result == 0)
-    fatal (NILF, _("virtual memory exhausted"));
+    OUT_OF_MEM();
 
 #ifdef HAVE_STRDUP
   return result;
@@ -435,7 +281,7 @@ xstrndup (const char *str, unsigned int length)
 #ifdef HAVE_STRNDUP
   result = strndup (str, length);
   if (result == 0)
-    fatal (NILF, _("virtual memory exhausted"));
+    OUT_OF_MEM();
 #else
   result = xmalloc (length + 1);
   if (length > 0)
@@ -468,41 +314,11 @@ lindex (const char *s, const char *limit, int c)
 char *
 end_of_token (const char *s)
 {
-  while (*s != '\0' && !isblank ((unsigned char)*s))
+  while (! STOP_SET (*s, MAP_BLANK|MAP_NUL))
     ++s;
   return (char *)s;
 }
 
-#ifdef WINDOWS32
-/*
- * Same as end_of_token, but take into account a stop character
- */
-char *
-end_of_token_w32 (const char *s, char stopchar)
-{
-  const char *p = s;
-  int backslash = 0;
-
-  while (*p != '\0' && *p != stopchar
-	 && (backslash || !isblank ((unsigned char)*p)))
-    {
-      if (*p++ == '\\')
-        {
-          backslash = !backslash;
-          while (*p == '\\')
-            {
-              backslash = !backslash;
-              ++p;
-            }
-        }
-      else
-        backslash = 0;
-    }
-
-  return (char *)p;
-}
-#endif
-
 /* Return the address of the first nonwhitespace or null in the string S.  */
 
 char *
@@ -551,9 +367,9 @@ copy_dep_chain (const struct dep *d)
 
       c->next = 0;
       if (firstnew == 0)
-	firstnew = lastnew = c;
+        firstnew = lastnew = c;
       else
-	lastnew = lastnew->next = c;
+        lastnew = lastnew->next = c;
 
       d = d->next;
     }
@@ -590,7 +406,6 @@ free_ns_chain (struct nameseq *ns)
 
 
 #if !HAVE_STRCASECMP && !HAVE_STRICMP && !HAVE_STRCMPI
-
 /* If we don't have strcasecmp() (from POSIX), or anything that can substitute
    for it, define our own version.  */
 
@@ -616,7 +431,6 @@ strcasecmp (const char *s1, const char *s2)
 #endif
 
 #if !HAVE_STRNCASECMP && !HAVE_STRNICMP && !HAVE_STRNCMPI
-
 /* If we don't have strncasecmp() (from POSIX), or anything that can
    substitute for it, define our own version.  */
 
@@ -643,7 +457,7 @@ strncasecmp (const char *s1, const char *s2, int n)
 }
 #endif
 
-#ifdef	GETLOADAVG_PRIVILEGED
+#ifdef  GETLOADAVG_PRIVILEGED
 
 #ifdef POSIX
 
@@ -656,7 +470,7 @@ strncasecmp (const char *s1, const char *s2, int n)
 #undef HAVE_SETREUID
 #undef HAVE_SETREGID
 
-#else	/* Not POSIX.  */
+#else   /* Not POSIX.  */
 
 /* Some POSIX.1 systems have the seteuid and setegid functions.  In a
    POSIX-like system, they are the best thing to use.  However, some
@@ -666,30 +480,30 @@ strncasecmp (const char *s1, const char *s2, int n)
 #undef HAVE_SETEUID
 #undef HAVE_SETEGID
 
-#endif	/* POSIX.  */
+#endif  /* POSIX.  */
 
-#ifndef	HAVE_UNISTD_H
+#ifndef HAVE_UNISTD_H
 extern int getuid (), getgid (), geteuid (), getegid ();
 extern int setuid (), setgid ();
 #ifdef HAVE_SETEUID
 extern int seteuid ();
 #else
-#ifdef	HAVE_SETREUID
+#ifdef  HAVE_SETREUID
 extern int setreuid ();
-#endif	/* Have setreuid.  */
-#endif	/* Have seteuid.  */
+#endif  /* Have setreuid.  */
+#endif  /* Have seteuid.  */
 #ifdef HAVE_SETEGID
 extern int setegid ();
 #else
-#ifdef	HAVE_SETREGID
+#ifdef  HAVE_SETREGID
 extern int setregid ();
-#endif	/* Have setregid.  */
-#endif	/* Have setegid.  */
-#endif	/* No <unistd.h>.  */
+#endif  /* Have setregid.  */
+#endif  /* Have setegid.  */
+#endif  /* No <unistd.h>.  */
 
 /* Keep track of the user and group IDs for user- and make- access.  */
 static int user_uid = -1, user_gid = -1, make_uid = -1, make_gid = -1;
-#define	access_inited	(user_uid != -1)
+#define access_inited   (user_uid != -1)
 static enum { make, user } current_access;
 
 
@@ -706,7 +520,7 @@ log_access (const char *flavor)
      run in a child fork whose stdout is piped.  */
 
   fprintf (stderr, _("%s: user %lu (real %lu), group %lu (real %lu)\n"),
-	   flavor, (unsigned long) geteuid (), (unsigned long) getuid (),
+           flavor, (unsigned long) geteuid (), (unsigned long) getuid (),
            (unsigned long) getegid (), (unsigned long) getgid ());
   fflush (stderr);
 }
@@ -732,14 +546,14 @@ init_access (void)
 #endif
 }
 
-#endif	/* GETLOADAVG_PRIVILEGED */
+#endif  /* GETLOADAVG_PRIVILEGED */
 
 /* Give the process appropriate permissions for access to
    user data (i.e., to stat files, or to spawn a child process).  */
 void
 user_access (void)
 {
-#ifdef	GETLOADAVG_PRIVILEGED
+#ifdef  GETLOADAVG_PRIVILEGED
 
   if (!access_inited)
     init_access ();
@@ -752,7 +566,7 @@ user_access (void)
      We now want to set the effective user and group IDs to the real IDs,
      which are the IDs of the process that exec'd make.  */
 
-#ifdef	HAVE_SETEUID
+#ifdef  HAVE_SETEUID
 
   /* Modern systems have the seteuid/setegid calls which set only the
      effective IDs, which is ideal.  */
@@ -760,9 +574,9 @@ user_access (void)
   if (seteuid (user_uid) < 0)
     pfatal_with_name ("user_access: seteuid");
 
-#else	/* Not HAVE_SETEUID.  */
+#else   /* Not HAVE_SETEUID.  */
 
-#ifndef	HAVE_SETREUID
+#ifndef HAVE_SETREUID
 
   /* System V has only the setuid/setgid calls to set user/group IDs.
      There is an effective ID, which can be set by setuid/setgid.
@@ -775,7 +589,7 @@ user_access (void)
   if (setuid (user_uid) < 0)
     pfatal_with_name ("user_access: setuid");
 
-#else	/* HAVE_SETREUID.  */
+#else   /* HAVE_SETREUID.  */
 
   /* In 4BSD, the setreuid/setregid calls set both the real and effective IDs.
      They may be set to themselves or each other.  So you have two alternatives
@@ -787,14 +601,14 @@ user_access (void)
   if (setreuid (make_uid, user_uid) < 0)
     pfatal_with_name ("user_access: setreuid");
 
-#endif	/* Not HAVE_SETREUID.  */
-#endif	/* HAVE_SETEUID.  */
+#endif  /* Not HAVE_SETREUID.  */
+#endif  /* HAVE_SETEUID.  */
 
-#ifdef	HAVE_SETEGID
+#ifdef  HAVE_SETEGID
   if (setegid (user_gid) < 0)
     pfatal_with_name ("user_access: setegid");
 #else
-#ifndef	HAVE_SETREGID
+#ifndef HAVE_SETREGID
   if (setgid (user_gid) < 0)
     pfatal_with_name ("user_access: setgid");
 #else
@@ -807,7 +621,7 @@ user_access (void)
 
   log_access (_("User access"));
 
-#endif	/* GETLOADAVG_PRIVILEGED */
+#endif  /* GETLOADAVG_PRIVILEGED */
 }
 
 /* Give the process appropriate permissions for access to
@@ -815,7 +629,7 @@ user_access (void)
 void
 make_access (void)
 {
-#ifdef	GETLOADAVG_PRIVILEGED
+#ifdef  GETLOADAVG_PRIVILEGED
 
   if (!access_inited)
     init_access ();
@@ -825,11 +639,11 @@ make_access (void)
 
   /* See comments in user_access, above.  */
 
-#ifdef	HAVE_SETEUID
+#ifdef  HAVE_SETEUID
   if (seteuid (make_uid) < 0)
     pfatal_with_name ("make_access: seteuid");
 #else
-#ifndef	HAVE_SETREUID
+#ifndef HAVE_SETREUID
   if (setuid (make_uid) < 0)
     pfatal_with_name ("make_access: setuid");
 #else
@@ -838,11 +652,11 @@ make_access (void)
 #endif
 #endif
 
-#ifdef	HAVE_SETEGID
+#ifdef  HAVE_SETEGID
   if (setegid (make_gid) < 0)
     pfatal_with_name ("make_access: setegid");
 #else
-#ifndef	HAVE_SETREGID
+#ifndef HAVE_SETREGID
   if (setgid (make_gid) < 0)
     pfatal_with_name ("make_access: setgid");
 #else
@@ -855,7 +669,7 @@ make_access (void)
 
   log_access (_("Make access"));
 
-#endif	/* GETLOADAVG_PRIVILEGED */
+#endif  /* GETLOADAVG_PRIVILEGED */
 }
 
 /* Give the process appropriate permissions for a child process.
@@ -863,7 +677,7 @@ make_access (void)
 void
 child_access (void)
 {
-#ifdef	GETLOADAVG_PRIVILEGED
+#ifdef  GETLOADAVG_PRIVILEGED
 
   if (!access_inited)
     abort ();
@@ -871,7 +685,7 @@ child_access (void)
   /* Set both the real and effective UID and GID to the user's.
      They cannot be changed back to make's.  */
 
-#ifndef	HAVE_SETREUID
+#ifndef HAVE_SETREUID
   if (setuid (user_uid) < 0)
     pfatal_with_name ("child_access: setuid");
 #else
@@ -879,7 +693,7 @@ child_access (void)
     pfatal_with_name ("child_access: setreuid");
 #endif
 
-#ifndef	HAVE_SETREGID
+#ifndef HAVE_SETREGID
   if (setgid (user_gid) < 0)
     pfatal_with_name ("child_access: setgid");
 #else
@@ -889,9 +703,9 @@ child_access (void)
 
   log_access (_("Child access"));
 
-#endif	/* GETLOADAVG_PRIVILEGED */
+#endif  /* GETLOADAVG_PRIVILEGED */
 }
-
+
 #ifdef NEED_GET_PATH_MAX
 unsigned int
 get_path_max (void)
@@ -902,58 +716,11 @@ get_path_max (void)
     {
       long int x = pathconf ("/", _PC_PATH_MAX);
       if (x > 0)
-	value = x;
+        value = x;
       else
-	return MAXPATHLEN;
+        return MAXPATHLEN;
     }
 
   return value;
 }
 #endif
-
-
-/* This code is stolen from gnulib.
-   If/when we abandon the requirement to work with K&R compilers, we can
-   remove this (and perhaps other parts of GNU make!) and migrate to using
-   gnulib directly.
-
-   This is called only through atexit(), which means die() has already been
-   invoked.  So, call exit() here directly.  Apparently that works...?
-*/
-
-/* Close standard output, exiting with status 'exit_failure' on failure.
-   If a program writes *anything* to stdout, that program should close
-   stdout and make sure that it succeeds before exiting.  Otherwise,
-   suppose that you go to the extreme of checking the return status
-   of every function that does an explicit write to stdout.  The last
-   printf can succeed in writing to the internal stream buffer, and yet
-   the fclose(stdout) could still fail (due e.g., to a disk full error)
-   when it tries to write out that buffered data.  Thus, you would be
-   left with an incomplete output file and the offending program would
-   exit successfully.  Even calling fflush is not always sufficient,
-   since some file systems (NFS and CODA) buffer written/flushed data
-   until an actual close call.
-
-   Besides, it's wasteful to check the return value from every call
-   that writes to stdout -- just let the internal stream state record
-   the failure.  That's what the ferror test is checking below.
-
-   It's important to detect such failures and exit nonzero because many
-   tools (most notably 'make' and other build-management systems) depend
-   on being able to detect failure in other tools via their exit status.  */
-
-void
-close_stdout (void)
-{
-  int prev_fail = ferror (stdout);
-  int fclose_fail = fclose (stdout);
-
-  if (prev_fail || fclose_fail)
-    {
-      if (fclose_fail)
-        error (NILF, _("write error: %s"), strerror (errno));
-      else
-        error (NILF, _("write error"));
-      exit (EXIT_FAILURE);
-    }
-}

output.c

@@ -0,0 +1,723 @@
+/* Output to stdout / stderr for GNU make
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "makeint.h"
+#include "job.h"
+
+/* GNU make no longer supports pre-ANSI89 environments.  */
+
+#include <assert.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+#else
+# include <sys/file.h>
+#endif
+
+#ifdef WINDOWS32
+# include <windows.h>
+# include <io.h>
+# include "sub_proc.h"
+#endif /* WINDOWS32 */
+
+struct output *output_context = NULL;
+unsigned int stdio_traced = 0;
+
+#define OUTPUT_NONE (-1)
+
+#define OUTPUT_ISSET(_out) ((_out)->out >= 0 || (_out)->err >= 0)
+
+#ifdef HAVE_FCNTL
+# define STREAM_OK(_s) ((fcntl (fileno (_s), F_GETFD) != -1) || (errno != EBADF))
+#else
+# define STREAM_OK(_s) 1
+#endif
+
+/* Write a string to the current STDOUT or STDERR.  */
+static void
+_outputs (struct output *out, int is_err, const char *msg)
+{
+  if (! out || ! out->syncout)
+    {
+      FILE *f = is_err ? stderr : stdout;
+      fputs (msg, f);
+      fflush (f);
+    }
+  else
+    {
+      int fd = is_err ? out->err : out->out;
+      int len = strlen (msg);
+      int r;
+
+      EINTRLOOP (r, lseek (fd, 0, SEEK_END));
+      while (1)
+        {
+          EINTRLOOP (r, write (fd, msg, len));
+          if (r == len || r <= 0)
+            break;
+          len -= r;
+          msg += r;
+        }
+    }
+}
+
+/* Write a message indicating that we've just entered or
+   left (according to ENTERING) the current directory.  */
+
+static int
+log_working_directory (int entering)
+{
+  static char *buf = NULL;
+  static unsigned int len = 0;
+  unsigned int need;
+  const char *fmt;
+  char *p;
+
+  /* Get enough space for the longest possible output.  */
+  need = strlen (program) + INTSTR_LENGTH + 2 + 1;
+  if (starting_directory)
+    need += strlen (starting_directory);
+
+  /* Use entire sentences to give the translators a fighting chance.  */
+  if (makelevel == 0)
+    if (starting_directory == 0)
+      if (entering)
+        fmt = _("%s: Entering an unknown directory\n");
+      else
+        fmt = _("%s: Leaving an unknown directory\n");
+    else
+      if (entering)
+        fmt = _("%s: Entering directory '%s'\n");
+      else
+        fmt = _("%s: Leaving directory '%s'\n");
+  else
+    if (starting_directory == 0)
+      if (entering)
+        fmt = _("%s[%u]: Entering an unknown directory\n");
+      else
+        fmt = _("%s[%u]: Leaving an unknown directory\n");
+    else
+      if (entering)
+        fmt = _("%s[%u]: Entering directory '%s'\n");
+      else
+        fmt = _("%s[%u]: Leaving directory '%s'\n");
+
+  need += strlen (fmt);
+
+  if (need > len)
+    {
+      buf = xrealloc (buf, need);
+      len = need;
+    }
+
+  p = buf;
+  if (print_data_base_flag)
+    {
+      *(p++) = '#';
+      *(p++) = ' ';
+    }
+
+  if (makelevel == 0)
+    if (starting_directory == 0)
+      sprintf (p, fmt , program);
+    else
+      sprintf (p, fmt, program, starting_directory);
+  else if (starting_directory == 0)
+    sprintf (p, fmt, program, makelevel);
+  else
+    sprintf (p, fmt, program, makelevel, starting_directory);
+
+  _outputs (NULL, 0, buf);
+
+  return 1;
+}
+
+/* Set a file descriptor to be in O_APPEND mode.
+   If it fails, just ignore it.  */
+
+static void
+set_append_mode (int fd)
+{
+#if defined(F_GETFL) && defined(F_SETFL) && defined(O_APPEND)
+  int flags = fcntl (fd, F_GETFL, 0);
+  if (flags >= 0)
+    fcntl (fd, F_SETFL, flags | O_APPEND);
+#endif
+}
+
+
+#ifndef NO_OUTPUT_SYNC
+
+/* Semaphore for use in -j mode with output_sync. */
+static sync_handle_t sync_handle = -1;
+
+#define FD_NOT_EMPTY(_f) ((_f) != OUTPUT_NONE && lseek ((_f), 0, SEEK_END) > 0)
+
+/* Set up the sync handle.  Disables output_sync on error.  */
+static int
+sync_init ()
+{
+  int combined_output = 0;
+
+#ifdef WINDOWS32
+  if ((!STREAM_OK (stdout) && !STREAM_OK (stderr))
+      || (sync_handle = create_mutex ()) == -1)
+    {
+      perror_with_name ("output-sync suppressed: ", "stderr");
+      output_sync = 0;
+    }
+  else
+    {
+      combined_output = same_stream (stdout, stderr);
+      prepare_mutex_handle_string (sync_handle);
+    }
+
+#else
+  if (STREAM_OK (stdout))
+    {
+      struct stat stbuf_o, stbuf_e;
+
+      sync_handle = fileno (stdout);
+      combined_output = (fstat (fileno (stdout), &stbuf_o) == 0
+                         && fstat (fileno (stderr), &stbuf_e) == 0
+                         && stbuf_o.st_dev == stbuf_e.st_dev
+                         && stbuf_o.st_ino == stbuf_e.st_ino);
+    }
+  else if (STREAM_OK (stderr))
+    sync_handle = fileno (stderr);
+  else
+    {
+      perror_with_name ("output-sync suppressed: ", "stderr");
+      output_sync = 0;
+    }
+#endif
+
+  return combined_output;
+}
+
+/* Support routine for output_sync() */
+static void
+pump_from_tmp (int from, FILE *to)
+{
+  static char buffer[8192];
+
+#ifdef WINDOWS32
+  int prev_mode;
+
+  /* "from" is opened by open_tmpfd, which does it in binary mode, so
+     we need the mode of "to" to match that.  */
+  prev_mode = _setmode (fileno (to), _O_BINARY);
+#endif
+
+  if (lseek (from, 0, SEEK_SET) == -1)
+    perror ("lseek()");
+
+  while (1)
+    {
+      int len;
+      EINTRLOOP (len, read (from, buffer, sizeof (buffer)));
+      if (len < 0)
+        perror ("read()");
+      if (len <= 0)
+        break;
+      if (fwrite (buffer, len, 1, to) < 1)
+        {
+          perror ("fwrite()");
+          break;
+        }
+      fflush (to);
+    }
+
+#ifdef WINDOWS32
+  /* Switch "to" back to its original mode, so that log messages by
+     Make have the same EOL format as without --output-sync.  */
+  _setmode (fileno (to), prev_mode);
+#endif
+}
+
+/* Obtain the lock for writing output.  */
+static void *
+acquire_semaphore (void)
+{
+  static struct flock fl;
+
+  fl.l_type = F_WRLCK;
+  fl.l_whence = SEEK_SET;
+  fl.l_start = 0;
+  fl.l_len = 1;
+  if (fcntl (sync_handle, F_SETLKW, &fl) != -1)
+    return &fl;
+  perror ("fcntl()");
+  return NULL;
+}
+
+/* Release the lock for writing output.  */
+static void
+release_semaphore (void *sem)
+{
+  struct flock *flp = (struct flock *)sem;
+  flp->l_type = F_UNLCK;
+  if (fcntl (sync_handle, F_SETLKW, flp) == -1)
+    perror ("fcntl()");
+}
+
+/* Returns a file descriptor to a temporary file.  The file is automatically
+   closed/deleted on exit.  Don't use a FILE* stream.  */
+int
+output_tmpfd ()
+{
+  int fd = -1;
+  FILE *tfile = tmpfile ();
+
+  if (! tfile)
+    pfatal_with_name ("tmpfile");
+
+  /* Create a duplicate so we can close the stream.  */
+  fd = dup (fileno (tfile));
+  if (fd < 0)
+    pfatal_with_name ("dup");
+
+  fclose (tfile);
+
+  set_append_mode (fd);
+
+  return fd;
+}
+
+/* Adds file descriptors to the child structure to support output_sync; one
+   for stdout and one for stderr as long as they are open.  If stdout and
+   stderr share a device they can share a temp file too.
+   Will reset output_sync on error.  */
+static void
+setup_tmpfile (struct output *out)
+{
+  /* Is make's stdout going to the same place as stderr?  */
+  static int combined_output = -1;
+
+  if (combined_output < 0)
+    combined_output = sync_init ();
+
+  if (STREAM_OK (stdout))
+    {
+      int fd = output_tmpfd ();
+      if (fd < 0)
+        goto error;
+      CLOSE_ON_EXEC (fd);
+      out->out = fd;
+    }
+
+  if (STREAM_OK (stderr))
+    {
+      if (out->out != OUTPUT_NONE && combined_output)
+        out->err = out->out;
+      else
+        {
+          int fd = output_tmpfd ();
+          if (fd < 0)
+            goto error;
+          CLOSE_ON_EXEC (fd);
+          out->err = fd;
+        }
+    }
+
+  return;
+
+  /* If we failed to create a temp file, disable output sync going forward.  */
+ error:
+  output_close (out);
+  output_sync = 0;
+}
+
+/* Synchronize the output of jobs in -j mode to keep the results of
+   each job together. This is done by holding the results in temp files,
+   one for stdout and potentially another for stderr, and only releasing
+   them to "real" stdout/stderr when a semaphore can be obtained. */
+
+void
+output_dump (struct output *out)
+{
+  int outfd_not_empty = FD_NOT_EMPTY (out->out);
+  int errfd_not_empty = FD_NOT_EMPTY (out->err);
+
+  if (outfd_not_empty || errfd_not_empty)
+    {
+      int traced = 0;
+
+      /* Try to acquire the semaphore.  If it fails, dump the output
+         unsynchronized; still better than silently discarding it.
+         We want to keep this lock for as little time as possible.  */
+      void *sem = acquire_semaphore ();
+
+      /* Log the working directory for this dump.  */
+      if (print_directory_flag && output_sync != OUTPUT_SYNC_RECURSE)
+        traced = log_working_directory (1);
+
+      if (outfd_not_empty)
+        pump_from_tmp (out->out, stdout);
+      if (errfd_not_empty && out->err != out->out)
+        pump_from_tmp (out->err, stderr);
+
+      if (traced)
+        log_working_directory (0);
+
+      /* Exit the critical section.  */
+      if (sem)
+        release_semaphore (sem);
+
+      /* Truncate and reset the output, in case we use it again.  */
+      if (out->out != OUTPUT_NONE)
+        {
+          int e;
+          lseek (out->out, 0, SEEK_SET);
+          EINTRLOOP (e, ftruncate (out->out, 0));
+        }
+      if (out->err != OUTPUT_NONE && out->err != out->out)
+        {
+          int e;
+          lseek (out->err, 0, SEEK_SET);
+          EINTRLOOP (e, ftruncate (out->err, 0));
+        }
+    }
+}
+#endif /* NO_OUTPUT_SYNC */
+
+
+/* Provide support for temporary files.  */
+
+#ifndef HAVE_STDLIB_H
+# ifdef HAVE_MKSTEMP
+int mkstemp (char *template);
+# else
+char *mktemp (char *template);
+# endif
+#endif
+
+FILE *
+output_tmpfile (char **name, const char *template)
+{
+#ifdef HAVE_FDOPEN
+  int fd;
+#endif
+
+#if defined HAVE_MKSTEMP || defined HAVE_MKTEMP
+# define TEMPLATE_LEN   strlen (template)
+#else
+# define TEMPLATE_LEN   L_tmpnam
+#endif
+  *name = xmalloc (TEMPLATE_LEN + 1);
+  strcpy (*name, template);
+
+#if defined HAVE_MKSTEMP && defined HAVE_FDOPEN
+  /* It's safest to use mkstemp(), if we can.  */
+  fd = mkstemp (*name);
+  if (fd == -1)
+    return 0;
+  return fdopen (fd, "w");
+#else
+# ifdef HAVE_MKTEMP
+  (void) mktemp (*name);
+# else
+  (void) tmpnam (*name);
+# endif
+
+# ifdef HAVE_FDOPEN
+  /* Can't use mkstemp(), but guard against a race condition.  */
+  fd = open (*name, O_CREAT|O_EXCL|O_WRONLY, 0600);
+  if (fd == -1)
+    return 0;
+  return fdopen (fd, "w");
+# else
+  /* Not secure, but what can we do?  */
+  return fopen (*name, "w");
+# endif
+#endif
+}
+
+
+/* This code is stolen from gnulib.
+   If/when we abandon the requirement to work with K&R compilers, we can
+   remove this (and perhaps other parts of GNU make!) and migrate to using
+   gnulib directly.
+
+   This is called only through atexit(), which means die() has already been
+   invoked.  So, call exit() here directly.  Apparently that works...?
+*/
+
+/* Close standard output, exiting with status 'exit_failure' on failure.
+   If a program writes *anything* to stdout, that program should close
+   stdout and make sure that it succeeds before exiting.  Otherwise,
+   suppose that you go to the extreme of checking the return status
+   of every function that does an explicit write to stdout.  The last
+   printf can succeed in writing to the internal stream buffer, and yet
+   the fclose(stdout) could still fail (due e.g., to a disk full error)
+   when it tries to write out that buffered data.  Thus, you would be
+   left with an incomplete output file and the offending program would
+   exit successfully.  Even calling fflush is not always sufficient,
+   since some file systems (NFS and CODA) buffer written/flushed data
+   until an actual close call.
+
+   Besides, it's wasteful to check the return value from every call
+   that writes to stdout -- just let the internal stream state record
+   the failure.  That's what the ferror test is checking below.
+
+   It's important to detect such failures and exit nonzero because many
+   tools (most notably 'make' and other build-management systems) depend
+   on being able to detect failure in other tools via their exit status.  */
+
+static void
+close_stdout (void)
+{
+  int prev_fail = ferror (stdout);
+  int fclose_fail = fclose (stdout);
+
+  if (prev_fail || fclose_fail)
+    {
+      if (fclose_fail)
+        perror_with_name (_("write error: stdout"), "");
+      else
+        O (error, NILF, _("write error: stdout"));
+      exit (MAKE_TROUBLE);
+    }
+}
+
+
+void
+output_init (struct output *out)
+{
+  if (out)
+    {
+      out->out = out->err = OUTPUT_NONE;
+      out->syncout = !!output_sync;
+      return;
+    }
+
+  /* Configure this instance of make.  Be sure stdout is line-buffered.  */
+
+#ifdef HAVE_SETVBUF
+# ifdef SETVBUF_REVERSED
+  setvbuf (stdout, _IOLBF, xmalloc (BUFSIZ), BUFSIZ);
+# else  /* setvbuf not reversed.  */
+  /* Some buggy systems lose if we pass 0 instead of allocating ourselves.  */
+  setvbuf (stdout, 0, _IOLBF, BUFSIZ);
+# endif /* setvbuf reversed.  */
+#elif HAVE_SETLINEBUF
+  setlinebuf (stdout);
+#endif  /* setlinebuf missing.  */
+
+  /* Force stdout/stderr into append mode.  This ensures parallel jobs won't
+     lose output due to overlapping writes.  */
+  set_append_mode (fileno (stdout));
+  set_append_mode (fileno (stderr));
+
+#ifdef HAVE_ATEXIT
+  if (STREAM_OK (stdout))
+    atexit (close_stdout);
+#endif
+}
+
+void
+output_close (struct output *out)
+{
+  if (! out)
+    {
+      if (stdio_traced)
+        log_working_directory (0);
+      return;
+    }
+
+#ifndef NO_OUTPUT_SYNC
+  output_dump (out);
+#endif
+
+  if (out->out >= 0)
+    close (out->out);
+  if (out->err >= 0 && out->err != out->out)
+    close (out->err);
+
+  output_init (out);
+}
+
+/* We're about to generate output: be sure it's set up.  */
+void
+output_start ()
+{
+#ifndef NO_OUTPUT_SYNC
+  /* If we're syncing output make sure the temporary file is set up.  */
+  if (output_context && output_context->syncout)
+    if (! OUTPUT_ISSET(output_context))
+      setup_tmpfile (output_context);
+#endif
+
+  /* If we're not syncing this output per-line or per-target, make sure we emit
+     the "Entering..." message where appropriate.  */
+  if (output_sync == OUTPUT_SYNC_NONE || output_sync == OUTPUT_SYNC_RECURSE)
+    if (! stdio_traced && print_directory_flag)
+      stdio_traced = log_working_directory (1);
+}
+
+void
+outputs (int is_err, const char *msg)
+{
+  if (! msg || *msg == '\0')
+    return;
+
+  output_start ();
+
+  _outputs (output_context, is_err, msg);
+}
+
+
+static struct fmtstring
+  {
+    char *buffer;
+    size_t size;
+  } fmtbuf = { NULL, 0 };
+
+static char *
+get_buffer (size_t need)
+{
+  /* Make sure we have room.  NEED includes space for \0.  */
+  if (need > fmtbuf.size)
+    {
+      fmtbuf.size += need * 2;
+      fmtbuf.buffer = xrealloc (fmtbuf.buffer, fmtbuf.size);
+    }
+
+  fmtbuf.buffer[need-1] = '\0';
+
+  return fmtbuf.buffer;
+}
+
+/* Print a message on stdout.  */
+
+void
+message (int prefix, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  char *p;
+
+  len += strlen (fmt) + strlen (program) + INTSTR_LENGTH + 4 + 1 + 1;
+  p = get_buffer (len);
+
+  if (prefix)
+    {
+      if (makelevel == 0)
+        sprintf (p, "%s: ", program);
+      else
+        sprintf (p, "%s[%u]: ", program, makelevel);
+      p += strlen (p);
+    }
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, "\n");
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (0, fmtbuf.buffer);
+}
+
+/* Print an error message.  */
+
+void
+error (const gmk_floc *flocp, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  char *p;
+
+  len += (strlen (fmt) + strlen (program)
+          + (flocp && flocp->filenm ? strlen (flocp->filenm) : 0)
+          + INTSTR_LENGTH + 4 + 1 + 1);
+  p = get_buffer (len);
+
+  if (flocp && flocp->filenm)
+    sprintf (p, "%s:%lu: ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
+    sprintf (p, "%s: ", program);
+  else
+    sprintf (p, "%s[%u]: ", program, makelevel);
+  p += strlen (p);
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, "\n");
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (1, fmtbuf.buffer);
+}
+
+/* Print an error message and exit.  */
+
+void
+fatal (const gmk_floc *flocp, size_t len, const char *fmt, ...)
+{
+  va_list args;
+  const char *stop = _(".  Stop.\n");
+  char *p;
+
+  len += (strlen (fmt) + strlen (program)
+          + (flocp && flocp->filenm ? strlen (flocp->filenm) : 0)
+          + INTSTR_LENGTH + 8 + strlen (stop) + 1);
+  p = get_buffer (len);
+
+  if (flocp && flocp->filenm)
+    sprintf (p, "%s:%lu: *** ", flocp->filenm, flocp->lineno);
+  else if (makelevel == 0)
+    sprintf (p, "%s: *** ", program);
+  else
+    sprintf (p, "%s[%u]: *** ", program, makelevel);
+  p += strlen (p);
+
+  va_start (args, fmt);
+  vsprintf (p, fmt, args);
+  va_end (args);
+
+  strcat (p, stop);
+
+  assert (fmtbuf.buffer[len-1] == '\0');
+  outputs (1, fmtbuf.buffer);
+
+  die (MAKE_FAILURE);
+}
+
+/* Print an error message from errno.  */
+
+void
+perror_with_name (const char *str, const char *name)
+{
+  const char *err = strerror (errno);
+  OSSS (error, NILF, _("%s%s: %s"), str, name, err);
+}
+
+/* Print an error message from errno and exit.  */
+
+void
+pfatal_with_name (const char *name)
+{
+  const char *err = strerror (errno);
+  OSS (fatal, NILF, _("%s: %s"), name, err);
+
+  /* NOTREACHED */
+}

output.h

@@ -0,0 +1,51 @@
+/* Output to stdout / stderr for GNU make
+Copyright (C) 2013-2014 Free Software Foundation, Inc.
+This file is part of GNU Make.
+
+GNU Make is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+struct output
+  {
+    int out;
+    int err;
+    unsigned int syncout:1;     /* True if we want to synchronize output.  */
+ };
+
+extern struct output *output_context;
+extern unsigned int stdio_traced;
+
+#define OUTPUT_SET(_new)    do{ output_context = (_new)->syncout ? (_new) : NULL; }while(0)
+#define OUTPUT_UNSET()      do{ output_context = NULL; }while(0)
+
+#define OUTPUT_TRACED()     do{ stdio_traced = 1; }while(0)
+#define OUTPUT_IS_TRACED()  (!!stdio_traced)
+
+FILE *output_tmpfile (char **, const char *);
+
+/* Initialize and close a child output structure: if NULL do this program's
+   output (this should only be done once).  */
+void output_init (struct output *out);
+void output_close (struct output *out);
+
+/* In situations where output may be about to be displayed but we're not
+   sure if we've set it up yet, call this.  */
+void output_start (void);
+
+/* Show a message on stdout or stderr.  Will start the output if needed.  */
+void outputs (int is_err, const char *msg);
+
+#ifndef NO_OUTPUT_SYNC
+int output_tmpfd (void);
+/* Dump any child output content to stdout, and reset it.  */
+void output_dump (struct output *out);
+#endif

po/.cvsignore

@@ -1,6 +0,0 @@
-*.gmo *.mo *.pot *.po
-
-Makefile Makefile.in Makefile.in.in Makevars.template
-Rules-quot stamp-po
-*.sed *.sin *.header
-POTFILES

po/.gitignore

@@ -0,0 +1,15 @@
+Makefile.in.in
+Makevars.template
+POTFILES
+Rules-quot
+boldquot.sed
+en@boldquot.header
+en@quot.header
+insert-header.sin
+make.pot
+quot.sed
+remove-potcdate.sin
+remove-potcdate.sed
+stamp-po
+*.gmo
+*.po

po/ChangeLog

@@ -1,93 +0,0 @@
-2013-01-06  Paul Smith  <psmith@gnu.org>
-
-	* POTFILES.in: Add new load.c file.
-
-2012-01-12  Paul Smith  <psmith@gnu.org>
-
-	* POTFILES.in: Add new guile.c file.
-
-2011-09-26  Paul Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added new translation file for Czech (cs).
-
-2009-09-16  Paul Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added new translation for Italian (it).
-
-2008-05-17  Paul Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added new translation for Lithuanian (lt).
-
-2007-08-15  Paul Smith  <psmith@gnu.org>
-
-	* LINGUAS: The Kinyarwanda (rw) translation has disappeared from
-	the translation site, so remove it.
-
-2006-01-28  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added new translation for Vietnamese (vi).
-
-2005-07-14  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added new translation for Indonesian (id).
-
-2005-05-09  Paul D. Smith  <psmith@gnu.org>
-
-	* POTFILES.in: Add new file vmsjobs.c.
-
-2005-04-06  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added a new translation for Kinywarwanda (rw).
-
-2005-02-09  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added a new translation for Irish (ga).
-
-2005-02-01  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added a new translation for Finnish (fi).
-
-2003-10-18  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added a new translation for Belarusian (be).
-
-2002-12-19  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Added a new translation for Ukrainian (uk).
-
-2002-10-05  Paul D. Smith  <psmith@gnu.org>
-
-	* POTFILES.in: Add variable.h as it has a translatable string.
-
-2002-08-08  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Add a new translation for Chinese (simplified) (zh_CN).
-
-2002-08-02  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS: Add a new translation for Swedish (sv).
-
-2002-04-21  Paul D. Smith  <psmith@gnu.org>
-
-	* LINGUAS, hr.po: Added new translation: Croatian.
-
-	* da.po, de.po, es.po, fr.po, gl.po, he.po, ja.po, ko.po, nl.po,
-	pl.po, pt_BR.po, ru.po, tr.po: Moved from i18n to here.
-	* .cvsignore: Moved from i18n to here.
-
-	* POTFILES.in, LINGUAS, Makevars: Created.
-
-Copyright (C) 2002-2012 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software
-Foundation; either version 3 of the License, or (at your option) any later
-version.
-
-GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.

po/Makevars

@@ -1,5 +1,5 @@
 # This is a -*-Makefile-*-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under

po/POTFILES.in

@@ -1,5 +1,5 @@
 # List of source files containing translatable strings.
-# Copyright (C) 2000-2012 Free Software Foundation, Inc.
+# Copyright (C) 2000-2014 Free Software Foundation, Inc.
 # This file is part of GNU Make.
 #
 # GNU Make is free software; you can redistribute it and/or modify it under
@@ -27,9 +27,11 @@ guile.c
 hash.c
 implicit.c
 job.c
+job.h
 load.c
 main.c
 misc.c
+output.c
 read.c
 remake.c
 remote-cstms.c

prepare_vms.com

@@ -0,0 +1,59 @@
+$!
+$! prepare_vms.com  - Build config.h-vms from master on VMS.
+$!
+$! This is used for building off the master instead of a release tarball.
+$!
+$!
+$!
+$! First try ODS-5, Pathworks V6 or UNZIP name.
+$!
+$ config_template = f$search("sys$disk:[]config*h-vms.template")
+$ if config_template .eqs. ""
+$ then
+$!
+$!  Try NFS, VMStar, or Pathworks V5 ODS-2 encoded name.
+$!
+$   config_template = f$search("sys$disk:[]config.h-vms*template")
+$   if config_template .eqs. ""
+$   then
+$       write sys$output "Could not find config.h-vms*template!"
+$       exit 44
+$   endif
+$ endif
+$ config_template_file = f$parse(config_template,,,"name")
+$ config_template_type = f$parse(config_template,,,"type")
+$ config_template = "sys$disk:[]" + config_template_file + config_template_type
+$!
+$!
+$! Pull the package and version from configure.ac
+$!
+$ open/read ac_file sys$disk:[]configure.ac
+$ac_read_loop:
+$ read ac_file/end=ac_read_loop_end line_in
+$ key = f$extract(0, 7, line_in)
+$ if key .nes. "AC_INIT" then goto ac_read_loop
+$ package = f$element (1,"[",line_in)
+$ package = f$element (0,"]",package)
+$ version = f$element (2,"[",line_in)
+$ version = f$element (0,"]",version)
+$ac_read_loop_end:
+$ close ac_file
+$!
+$ if (package .eqs. "") .or. (version .eqs. "")
+$ then
+$    write sys$output "Unable to determine package and/or version!"
+$    exit 44
+$ endif
+$!
+$!
+$ outfile = "sys$disk:[]config.h-vms"
+$!
+$! Note the pipe command is close to the length of 255, which is the
+$! maximum token length prior to VMS V8.2:
+$! %DCL-W-TKNOVF, command element is too long - shorten
+$ pipe (write sys$output "sub/%PACKAGE%/''package'/WHOLE/NOTYPE" ;-
+        write sys$output "sub/%VERSION%/''version'/WHOLE/NOTYPE" ;-
+        write sys$output "exit") |-
+       edit/edt 'config_template'/out='outfile'/command=sys$pipe >nla0:
+$!
+$ write sys$output package, ", version: ", version, " prepared for VMS"

prepare_w32.bat

@@ -1,5 +1,5 @@
 @echo off
-@echo Windows32 CVS build preparation of config.h.W32 and NMakefile.
+@echo Windows32 SCM build preparation of config.h.W32 and NMakefile.
 if not exist config.h.W32 copy config.h.W32.template config.h.W32
 if not exist config.h copy config.h.W32 config.h
 if not exist NMakefile copy NMakefile.template NMakefile

remote-cstms.c

@@ -3,7 +3,7 @@
    Please do not send bug reports or questions about it to
    the Make maintainers.
 
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -18,8 +18,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
-#include "job.h"
+#include "makeint.h"
 #include "filedef.h"
 #include "commands.h"
 #include "job.h"
@@ -34,7 +33,7 @@ char *remote_description = "Customs";
 
 /* File name of the Customs 'export' client command.
    A full path name can be used to avoid some path-searching overhead.  */
-#define	EXPORT_COMMAND	"/usr/local/bin/export"
+#define EXPORT_COMMAND  "/usr/local/bin/export"
 
 /* ExportPermit gotten by start_remote_job_p, and used by start_remote_job.  */
 static ExportPermit permit;
@@ -76,11 +75,11 @@ start_remote_job_p (int first_p)
         }
 
       /* For secure Customs, make is installed setuid root and
-	 Customs requires a privileged source port be used.  */
+         Customs requires a privileged source port be used.  */
       make_access ();
 
       if (ISDB (DB_JOBS))
-        Rpc_Debug(1);
+        Rpc_Debug (1);
 
       /* Ping the daemon once to see if it is there.  */
       inited = Customs_Ping () == RPC_SUCCESS ? 1 : -1;
@@ -89,20 +88,20 @@ start_remote_job_p (int first_p)
       user_access ();
 
       if (starting_directory == 0)
-	/* main couldn't figure it out.  */
-	inited = -1;
+        /* main couldn't figure it out.  */
+        inited = -1;
       else
-	{
-	  /* Normalize the current directory path name to something
-	     that should work on all machines exported to.  */
+        {
+          /* Normalize the current directory path name to something
+             that should work on all machines exported to.  */
 
-	  normalized_cwd = xmalloc (GET_PATH_MAX);
-	  strcpy (normalized_cwd, starting_directory);
-	  if (Customs_NormPath (normalized_cwd, GET_PATH_MAX) < 0)
-	    /* Path normalization failure means using Customs
-	       won't work, but it's not really an error.  */
-	    inited = -1;
-	}
+          normalized_cwd = xmalloc (GET_PATH_MAX);
+          strcpy (normalized_cwd, starting_directory);
+          if (Customs_NormPath (normalized_cwd, GET_PATH_MAX) < 0)
+            /* Path normalization failure means using Customs
+               won't work, but it's not really an error.  */
+            inited = -1;
+        }
     }
 
   if (inited < 0)
@@ -110,7 +109,7 @@ start_remote_job_p (int first_p)
 
   njobs = job_slots_used;
   if (!first_p)
-    njobs -= 1;		/* correction for being called from reap_children() */
+    njobs -= 1;         /* correction for being called from reap_children() */
 
   /* the first job should run locally, or, if the -l flag is given, we use
      that as clue as to how many local jobs should be scheduled locally */
@@ -152,7 +151,7 @@ start_remote_job (char **argv, char **envp, int stdin_fd,
   retsock = Rpc_UdpCreate (True, 0);
   if (retsock < 0)
     {
-      error (NILF, "exporting: Couldn't create return socket.");
+      O (error, NILF, "exporting: Couldn't create return socket.");
       return 1;
     }
 
@@ -171,7 +170,7 @@ start_remote_job (char **argv, char **envp, int stdin_fd,
 
   /* Create a WayBill to give to the server.  */
   len = Customs_MakeWayBill (&permit, normalized_cwd, argv[0], argv,
-			     envp, retport, waybill);
+                             envp, retport, waybill);
 
   /* Modify the waybill as if the remote child had done 'child_access ()'.  */
   {
@@ -187,45 +186,47 @@ start_remote_job (char **argv, char **envp, int stdin_fd,
   sin.sin_port = htons (Customs_Port ());
   sin.sin_addr = permit.addr;
   status = Rpc_Call (sock, &sin, (Rpc_Proc) CUSTOMS_IMPORT,
-		     len, (Rpc_Opaque) waybill,
-		     sizeof(msg), (Rpc_Opaque) msg,
-		     1, &timeout);
+                     len, (Rpc_Opaque) waybill,
+                     sizeof (msg), (Rpc_Opaque) msg,
+                     1, &timeout);
 
-  host = gethostbyaddr((char *)&permit.addr, sizeof(permit.addr), AF_INET);
+  host = gethostbyaddr ((char *)&permit.addr, sizeof(permit.addr), AF_INET);
 
-  if (status != RPC_SUCCESS)
-    {
-      (void) close (retsock);
-      (void) close (sock);
-      error (NILF, "exporting to %s: %s",
-             host ? host->h_name : inet_ntoa (permit.addr),
-             Rpc_ErrorMessage (status));
-      return 1;
-    }
-  else if (msg[0] != 'O' || msg[1] != 'k' || msg[2] != '\0')
-    {
-      (void) close (retsock);
-      (void) close (sock);
-      error (NILF, "exporting to %s: %s",
-             host ? host->h_name : inet_ntoa (permit.addr),
-             msg);
-      return 1;
-    }
-  else
-    {
-      error (NILF, "*** exported to %s (id %u)",
-	      host ? host->h_name : inet_ntoa (permit.addr),
-	      permit.id);
-    }
+  {
+    const char *hnm = host ? host->h_name : inet_ntoa (permit.addr);
+    size_t hlen = strlen (hnm);
 
-  fflush (stdout);
-  fflush (stderr);
+    if (status != RPC_SUCCESS)
+      {
+        const char *err = Rpc_ErrorMessage (status);
+        (void) close (retsock);
+        (void) close (sock);
+        error (NILF, hlen + strlen (err),
+               "exporting to %s: %s", hnm, err);
+        return 1;
+      }
+    else if (msg[0] != 'O' || msg[1] != 'k' || msg[2] != '\0')
+      {
+        (void) close (retsock);
+        (void) close (sock);
+        error (NILF, hlen + strlen (msg), "exporting to %s: %s", hnm, msg);
+        return 1;
+      }
+    else
+      {
+        error (NILF, hlen + INTSTR_LENGTH,
+               "*** exported to %s (id %u)", hnm, permit.id);
+      }
 
-  pid = vfork ();
+    fflush (stdout);
+    fflush (stderr);
+  }
+
+  pid = fork ();
   if (pid < 0)
     {
       /* The fork failed!  */
-      perror_with_name ("vfork", "");
+      perror_with_name ("fork", "");
       return 1;
     }
   else if (pid == 0)
@@ -233,7 +234,7 @@ start_remote_job (char **argv, char **envp, int stdin_fd,
       /* Child side.  Run 'export' to handle the connection.  */
       static char sock_buf[20], retsock_buf[20], id_buf[20];
       static char *new_argv[6] =
-	{ EXPORT_COMMAND, "-id", sock_buf, retsock_buf, id_buf, 0 };
+        { EXPORT_COMMAND, "-id", sock_buf, retsock_buf, id_buf, 0 };
 
       /* Set up the arguments.  */
       (void) sprintf (sock_buf, "%d", sock);
@@ -242,7 +243,7 @@ start_remote_job (char **argv, char **envp, int stdin_fd,
 
       /* Get the right stdin.  */
       if (stdin_fd != 0)
-	(void) dup2 (stdin_fd, 0);
+        (void) dup2 (stdin_fd, 0);
 
       /* Unblock signals in the child.  */
       unblock_sigs ();

remote-stub.c

@@ -1,5 +1,5 @@
 /* Template for the remote job exportation interface to GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 #include "filedef.h"
 #include "job.h"
 #include "commands.h"

rule.c

@@ -1,5 +1,5 @@
 /* Pattern and suffix rule internals for GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,12 +14,12 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 #include <assert.h>
 
-#include "dep.h"
 #include "filedef.h"
+#include "dep.h"
 #include "job.h"
 #include "commands.h"
 #include "variable.h"
@@ -70,7 +70,7 @@ count_implicit_rule_limits (void)
 {
   char *name;
   int namelen;
-  struct rule *rule, *lastrule;
+  struct rule *rule;
 
   num_pattern_rules = max_pattern_targets = max_pattern_deps = 0;
   max_pattern_dep_length = 0;
@@ -78,7 +78,6 @@ count_implicit_rule_limits (void)
   name = 0;
   namelen = 0;
   rule = pattern_rules;
-  lastrule = 0;
   while (rule != 0)
     {
       unsigned int ndeps = 0;
@@ -88,10 +87,10 @@ count_implicit_rule_limits (void)
       ++num_pattern_rules;
 
       if (rule->num > max_pattern_targets)
-	max_pattern_targets = rule->num;
+        max_pattern_targets = rule->num;
 
       for (dep = rule->deps; dep != 0; dep = dep->next)
-	{
+        {
           const char *dname = dep_name (dep);
           unsigned int len = strlen (dname);
 
@@ -107,43 +106,41 @@ count_implicit_rule_limits (void)
 #endif
           ndeps++;
 
-	  if (len > max_pattern_dep_length)
-	    max_pattern_dep_length = len;
+          if (len > max_pattern_dep_length)
+            max_pattern_dep_length = len;
 
-	  if (p != 0 && p2 > p)
-	    {
-	      /* There is a slash before the % in the dep name.
-		 Extract the directory name.  */
-	      if (p == dname)
-		++p;
-	      if (p - dname > namelen)
-		{
-		  namelen = p - dname;
-		  name = xrealloc (name, namelen + 1);
-		}
-	      memcpy (name, dname, p - dname);
-	      name[p - dname] = '\0';
+          if (p != 0 && p2 > p)
+            {
+              /* There is a slash before the % in the dep name.
+                 Extract the directory name.  */
+              if (p == dname)
+                ++p;
+              if (p - dname > namelen)
+                {
+                  namelen = p - dname;
+                  name = xrealloc (name, namelen + 1);
+                }
+              memcpy (name, dname, p - dname);
+              name[p - dname] = '\0';
 
-	      /* In the deps of an implicit rule the 'changed' flag
-		 actually indicates that the dependency is in a
-		 nonexistent subdirectory.  */
+              /* In the deps of an implicit rule the 'changed' flag
+                 actually indicates that the dependency is in a
+                 nonexistent subdirectory.  */
 
-	      dep->changed = !dir_file_exists_p (name, "");
-	    }
-	  else
-	    /* This dependency does not reside in a subdirectory.  */
-	    dep->changed = 0;
-	}
+              dep->changed = !dir_file_exists_p (name, "");
+            }
+          else
+            /* This dependency does not reside in a subdirectory.  */
+            dep->changed = 0;
+        }
 
       if (ndeps > max_pattern_deps)
-	max_pattern_deps = ndeps;
+        max_pattern_deps = ndeps;
 
-      lastrule = rule;
       rule = next;
     }
 
-  if (name != 0)
-    free (name);
+  free (name);
 }
 
 /* Create a pattern rule from a suffix rule.
@@ -219,7 +216,7 @@ convert_to_pattern (void)
     {
       unsigned int l = strlen (dep_name (d));
       if (l > maxsuffix)
-	maxsuffix = l;
+        maxsuffix = l;
     }
 
   /* Space to construct the suffix rule target name.  */
@@ -230,12 +227,12 @@ convert_to_pattern (void)
       unsigned int slen;
 
       /* Make a rule that is just the suffix, with no deps or commands.
-	 This rule exists solely to disqualify match-anything rules.  */
+         This rule exists solely to disqualify match-anything rules.  */
       convert_suffix_rule (dep_name (d), 0, 0);
 
       if (d->file->cmds != 0)
-	/* Record a pattern for this suffix's null-suffix rule.  */
-	convert_suffix_rule ("", dep_name (d), d->file->cmds);
+        /* Record a pattern for this suffix's null-suffix rule.  */
+        convert_suffix_rule ("", dep_name (d), d->file->cmds);
 
       /* Add every other suffix to this one and see if it exists as a
          two-suffix rule.  */
@@ -243,32 +240,32 @@ convert_to_pattern (void)
       memcpy (rulename, dep_name (d), slen);
 
       for (d2 = suffix_file->deps; d2 != 0; d2 = d2->next)
-	{
+        {
           struct file *f;
           unsigned int s2len;
 
-	  s2len = strlen (dep_name (d2));
+          s2len = strlen (dep_name (d2));
 
           /* Can't build something from itself.  */
-	  if (slen == s2len && streq (dep_name (d), dep_name (d2)))
-	    continue;
+          if (slen == s2len && streq (dep_name (d), dep_name (d2)))
+            continue;
 
-	  memcpy (rulename + slen, dep_name (d2), s2len + 1);
-	  f = lookup_file (rulename);
-	  if (f == 0 || f->cmds == 0)
-	    continue;
+          memcpy (rulename + slen, dep_name (d2), s2len + 1);
+          f = lookup_file (rulename);
+          if (f == 0 || f->cmds == 0)
+            continue;
 
-	  if (s2len == 2 && rulename[slen] == '.' && rulename[slen + 1] == 'a')
-	    /* A suffix rule '.X.a:' generates the pattern rule '(%.o): %.X'.
-	       It also generates a normal '%.a: %.X' rule below.  */
-	    convert_suffix_rule (NULL, /* Indicates '(%.o)'.  */
-				 dep_name (d),
-				 f->cmds);
+          if (s2len == 2 && rulename[slen] == '.' && rulename[slen + 1] == 'a')
+            /* A suffix rule '.X.a:' generates the pattern rule '(%.o): %.X'.
+               It also generates a normal '%.a: %.X' rule below.  */
+            convert_suffix_rule (NULL, /* Indicates '(%.o)'.  */
+                                 dep_name (d),
+                                 f->cmds);
 
-	  /* The suffix rule '.X.Y:' is converted
-	     to the pattern rule '%.Y: %.X'.  */
-	  convert_suffix_rule (dep_name (d2), dep_name (d), f->cmds);
-	}
+          /* The suffix rule '.X.Y:' is converted
+             to the pattern rule '%.Y: %.X'.  */
+          convert_suffix_rule (dep_name (d2), dep_name (d), f->cmds);
+        }
     }
 }
 
@@ -296,42 +293,42 @@ new_pattern_rule (struct rule *rule, int override)
   for (r = pattern_rules; r != 0; lastrule = r, r = r->next)
     for (i = 0; i < rule->num; ++i)
       {
-	for (j = 0; j < r->num; ++j)
-	  if (!streq (rule->targets[i], r->targets[j]))
-	    break;
+        for (j = 0; j < r->num; ++j)
+          if (!streq (rule->targets[i], r->targets[j]))
+            break;
         /* If all the targets matched...  */
-	if (j == r->num)
-	  {
-	    struct dep *d, *d2;
-	    for (d = rule->deps, d2 = r->deps;
-		 d != 0 && d2 != 0; d = d->next, d2 = d2->next)
-	      if (!streq (dep_name (d), dep_name (d2)))
-		break;
-	    if (d == 0 && d2 == 0)
-	      {
-		/* All the dependencies matched.  */
-		if (override)
-		  {
-		    /* Remove the old rule.  */
-		    freerule (r, lastrule);
-		    /* Install the new one.  */
-		    if (pattern_rules == 0)
-		      pattern_rules = rule;
-		    else
-		      last_pattern_rule->next = rule;
-		    last_pattern_rule = rule;
+        if (j == r->num)
+          {
+            struct dep *d, *d2;
+            for (d = rule->deps, d2 = r->deps;
+                 d != 0 && d2 != 0; d = d->next, d2 = d2->next)
+              if (!streq (dep_name (d), dep_name (d2)))
+                break;
+            if (d == 0 && d2 == 0)
+              {
+                /* All the dependencies matched.  */
+                if (override)
+                  {
+                    /* Remove the old rule.  */
+                    freerule (r, lastrule);
+                    /* Install the new one.  */
+                    if (pattern_rules == 0)
+                      pattern_rules = rule;
+                    else
+                      last_pattern_rule->next = rule;
+                    last_pattern_rule = rule;
 
-		    /* We got one.  Stop looking.  */
-		    goto matched;
-		  }
-		else
-		  {
-		    /* The old rule stays intact.  Destroy the new one.  */
-		    freerule (rule, (struct rule *) 0);
-		    return 0;
-		  }
-	      }
-	  }
+                    /* We got one.  Stop looking.  */
+                    goto matched;
+                  }
+                else
+                  {
+                    /* The old rule stays intact.  Destroy the new one.  */
+                    freerule (rule, (struct rule *) 0);
+                    return 0;
+                  }
+              }
+          }
       }
 
  matched:;
@@ -340,9 +337,9 @@ new_pattern_rule (struct rule *rule, int override)
     {
       /* There was no rule to replace.  */
       if (pattern_rules == 0)
-	pattern_rules = rule;
+        pattern_rules = rule;
       else
-	last_pattern_rule->next = rule;
+        last_pattern_rule->next = rule;
       last_pattern_rule = rule;
     }
 
@@ -359,7 +356,7 @@ void
 install_pattern_rule (struct pspec *p, int terminal)
 {
   struct rule *r;
-  char *ptr;
+  const char *ptr;
 
   r = xmalloc (sizeof (struct rule));
 
@@ -375,7 +372,7 @@ install_pattern_rule (struct pspec *p, int terminal)
   ++r->suffixes[0];
 
   ptr = p->dep;
-  r->deps = PARSE_FILE_SEQ (&ptr, struct dep, '\0', NULL, 0);
+  r->deps = PARSE_SIMPLE_SEQ ((char **)&ptr, struct dep);
 
   if (new_pattern_rule (r, 0))
     {
@@ -384,7 +381,7 @@ install_pattern_rule (struct pspec *p, int terminal)
       r->cmds->fileinfo.filenm = 0;
       r->cmds->fileinfo.lineno = 0;
       /* These will all be string literals, but we malloc space for them
-	 anyway because somebody might want to free them later.  */
+         anyway because somebody might want to free them later.  */
       r->cmds->commands = xstrdup (p->commands);
       r->cmds->command_lines = 0;
       r->cmds->recipe_prefix = RECIPEPREFIX_DEFAULT;
@@ -470,7 +467,7 @@ create_pattern_rule (const char **targets, const char **target_percents,
 
 /* Print the data base of rules.  */
 
-static void			/* Useful to call from gdb.  */
+static void                     /* Useful to call from gdb.  */
 print_rule (struct rule *r)
 {
   unsigned int i;
@@ -506,7 +503,7 @@ print_rule_data_base (void)
       print_rule (r);
 
       if (r->terminal)
-	++terminal;
+        ++terminal;
     }
 
   if (rules == 0)
@@ -514,12 +511,12 @@ print_rule_data_base (void)
   else
     {
       printf (_("\n# %u implicit rules, %u"), rules, terminal);
-#ifndef	NO_FLOAT
+#ifndef NO_FLOAT
       printf (" (%.1f%%)", (double) terminal / (double) rules * 100.0);
 #else
       {
-	int f = (terminal * 1000 + 5) / rules;
-	printf (" (%d.%d%%)", f/10, f%10);
+        int f = (terminal * 1000 + 5) / rules;
+        printf (" (%d.%d%%)", f/10, f%10);
       }
 #endif
       puts (_(" terminal."));
@@ -530,7 +527,7 @@ print_rule_data_base (void)
       /* This can happen if a fatal error was detected while reading the
          makefiles and thus count_implicit_rule_limits wasn't called yet.  */
       if (num_pattern_rules != 0)
-        fatal (NILF, _("BUG: num_pattern_rules is wrong!  %u != %u"),
-               num_pattern_rules, rules);
+        ONN (fatal, NILF, _("BUG: num_pattern_rules is wrong!  %u != %u"),
+             num_pattern_rules, rules);
     }
 }

rule.h

@@ -1,5 +1,5 @@
 /* Definitions for using pattern rules in GNU Make.
-Copyright (C) 1988-2012 Free Software Foundation, Inc.
+Copyright (C) 1988-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -20,20 +20,20 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 struct rule
   {
     struct rule *next;
-    const char **targets;	/* Targets of the rule.  */
-    unsigned int *lens;		/* Lengths of each target.  */
-    const char **suffixes;	/* Suffixes (after '%') of each target.  */
-    struct dep *deps;		/* Dependencies of the rule.  */
-    struct commands *cmds;	/* Commands to execute.  */
+    const char **targets;       /* Targets of the rule.  */
+    unsigned int *lens;         /* Lengths of each target.  */
+    const char **suffixes;      /* Suffixes (after '%') of each target.  */
+    struct dep *deps;           /* Dependencies of the rule.  */
+    struct commands *cmds;      /* Commands to execute.  */
     unsigned short num;         /* Number of targets.  */
-    char terminal;		/* If terminal (double-colon).  */
-    char in_use;		/* If in use by a parent pattern_search.  */
+    char terminal;              /* If terminal (double-colon).  */
+    char in_use;                /* If in use by a parent pattern_search.  */
   };
 
 /* For calling install_pattern_rule.  */
 struct pspec
   {
-    char *target, *dep, *commands;
+    const char *target, *dep, *commands;
   };
 
 

signame.c

@@ -1,5 +1,5 @@
 /* Convert between signal names and numbers.
-Copyright (C) 1990-2012 Free Software Foundation, Inc.
+Copyright (C) 1990-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 /* If the system provides strsignal, we don't need it. */
 
@@ -27,11 +27,11 @@ this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #if !HAVE_DECL_SYS_SIGLIST
 
 /* Some systems do not define NSIG in <signal.h>.  */
-#ifndef	NSIG
-#ifdef	_NSIG
-#define	NSIG	_NSIG
+#ifndef NSIG
+#ifdef  _NSIG
+#define NSIG    _NSIG
 #else
-#define	NSIG	32
+#define NSIG    32
 #endif
 #endif
 
@@ -192,10 +192,10 @@ signame_init (void)
   init_sig (SIGURG, "URG", _("Urgent I/O condition"));
 #endif
 #if defined (SIGIO)
-  /* "I/O pending" has also been suggested.  A disadvantage is
-     that signal only happens when the process has
-     asked for it, not everytime I/O is pending.  Another disadvantage
-     is the confusion from giving it a different name than under Unix.  */
+  /* "I/O pending" has also been suggested.  A disadvantage is that signal
+     only happens when the process has asked for it, not every time I/O is
+     pending.  Another disadvantage is the confusion from giving it a
+     different name than under Unix.  */
   init_sig (SIGIO, "IO", _("I/O possible"));
 #endif
 #if defined (SIGWIND)
@@ -244,7 +244,7 @@ strsignal (int sig)
 # endif
 #endif
 
-  if (sig > 0 || sig < NSIG)
+  if (sig > 0 && sig < NSIG)
     return (char *) sys_siglist[sig];
 
   sprintf (buf, "Signal %d", sig);

strcache.c

@@ -1,5 +1,5 @@
 /* Constant string caching for GNU Make.
-Copyright (C) 2006-2012 Free Software Foundation, Inc.
+Copyright (C) 2006-2014 Free Software Foundation, Inc.
 This file is part of GNU Make.
 
 GNU Make is free software; you can redistribute it and/or modify it under the
@@ -14,7 +14,7 @@ A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 You should have received a copy of the GNU General Public License along with
 this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-#include "make.h"
+#include "makeint.h"
 
 #include <stddef.h>
 #include <assert.h>
@@ -57,7 +57,7 @@ static unsigned long total_size = 0;
    that this doesn't seem to be much of an issue in practice.
  */
 static struct strcache *
-new_cache()
+new_cache ()
 {
   struct strcache *new;
   new = xmalloc (bufsize + CACHE_BUFFER_OFFSET);
@@ -208,7 +208,7 @@ strcache_add_len (const char *str, unsigned int len)
 }
 
 int
-strcache_setbufsize(unsigned int size)
+strcache_setbufsize (unsigned int size)
 {
   if (size > bufsize)
     bufsize = size;
@@ -233,7 +233,7 @@ strcache_print_stats (const char *prefix)
 
   if (! strcache)
     {
-      printf(_("\n%s No strcache buffers\n"), prefix);
+      printf (_("\n%s No strcache buffers\n"), prefix);
       return;
     }
 

subproc.bat

@@ -1,5 +1,5 @@
 @echo off
-rem Copyright (C) 1996-2012 Free Software Foundation, Inc.
+rem Copyright (C) 1996-2014 Free Software Foundation, Inc.
 rem This file is part of GNU Make.
 rem
 rem GNU Make is free software; you can redistribute it and/or modify it under

tests/.cvsignore

@@ -1,3 +0,0 @@
-work
-.*gdbinit
-.gdb_history